Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Integrin αvβ3 is an important target for tumor imaging and therapy. It is highly expressed on tumor neovascular endothelial cells and various malignant tumor cells， while being nearly absent in normal tissues and quiescent endothelial cells. Positron emission tomography （PET） based on Arg-Gly-Asp （RGD） peptides has been widely applied， yet single-target strategies are limited by tumor heterogeneity. β^- radionuclide-labeled RGD peptides exhibit problems of insufficient tumor uptake and renal accumulation. This review summarizes the preclinical progress in two frontier directions. Dual-targeting strategies combine integrin αvβ3 with prostate-specific membrane antigen （PSMA） or fibroblast activation protein （FAP） to construct heterodimeric probes. Preclinical and clinical studies have demonstrated that dual-targeting probes achieve significantly superior tumor uptake， target-to-background ratios， and lesion detection rates compared to single-target controls， effectively overcoming tumor heterogeneity and improving tumor uptake and detection rate. α radionuclides， by leveraging high linear energy transfer and short tissue range， demonstrate superior antitumor efficacy over β^-radionuclides. In terms of clinical translation， the albumin-binding RGD dimer labeled with lutetium-177 （¹⁷⁷Lu-AB-3PRGD₂） has completed a first-in-human study， preliminarily validating the clinical feasibility of integrin-targeted radionuclide therapy， albeit with limited antitumor activity. Future directions include molecular imaging-based patient selection， optimization of dual-targeting molecular structures， and development of α radionuclide formulations.

Integrin αvβ3 is an important target for tumor imaging and therapy. It is highly expressed on tumor neovascular endothelial cells and various malignant tumor cells， while being nearly absent in normal tissues and quiescent endothelial cells. Positron emission tomography （PET） based on Arg-Gly-Asp （RGD） peptides has been widely applied， yet single-target strategies are limited by tumor heterogeneity. β^- radionuclide-labeled RGD peptides exhibit problems of insufficient tumor uptake and renal accumulation. This review summarizes the preclinical progress in two frontier directions. Dual-targeting strategies combine integrin αvβ3 with prostate-specific membrane antigen （PSMA） or fibroblast activation protein （FAP） to construct heterodimeric probes. Preclinical and clinical studies have demonstrated that dual-targeting probes achieve significantly superior tumor uptake， target-to-background ratios， and lesion detection rates compared to single-target controls， effectively overcoming tumor heterogeneity and improving tumor uptake and detection rate. α radionuclides， by leveraging high linear energy transfer and short tissue range， demonstrate superior antitumor efficacy over β^-radionuclides. In terms of clinical translation， the albumin-binding RGD dimer labeled with lutetium-177 （¹⁷⁷Lu-AB-3PRGD₂） has completed a first-in-human study， preliminarily validating the clinical feasibility of integrin-targeted radionuclide therapy， albeit with limited antitumor activity. Future directions include molecular imaging-based patient selection， optimization of dual-targeting molecular structures， and development of α radionuclide formulations.

ObjectiveTo investigate the mechanism underlying the weight loss effect of electrothermal acupuncture （ETA） in diet-induced obese （DIO） model mice based on the hypoxia-inducible factor-1α （HIF-1α）/sphingosine-1-phosphate （S1P）sphingosine-1-phosphate receptor 3 （S1PR3） signaling pathway-mediated macrophage polarization. MethodsAn obesity mouse model was established by continuously feeding at a high-fat diet （HFD） for 8 weeks. Twenty successfully modeled obese mice were randomly divided into a model group and an electrothermal acupuncture （ETA） group with 10 mice per group， both of which continued to receive the HFD till week 12. Another 10 mice were assigned to the normal group and fed a standard chow diet continuously for 12 weeks. Starting from week 9 of the experiment， mice in the ETA group received electrothermal acupuncture stimulation at Zhongwan （CV12）， bilateral Tianshu （ST25）， and bilateral Zusanli （ST36） for 30 minutes per session， with the instrument current set at （40±0.5）mA and a constant temperature of （40±0.5）℃. Mice in the normal group and the model group were restrained in the same manner for 30 minutes without acupuncture. All interventions were performed once every other day for a total of 4 weeks. Ten hours after the final intervention， the body weight， waist circumference， and body length of mice in each group were measured， and Lee's index was calculated. Serum biochemical analysis was performed to assess fasting blood glucose （FBG）， total cholesterol （TC）， triglycerides （TG）， high-density lipoprotein cholesterol （HDL-C）， low-density lipoprotein cholesterol （LDL-C）， alanine aminotransferase （ALT）， aspartate aminotransferase （AST）， blood urea nitrogen （BUN）， and creatinine （Cr）. Serum leptin （LEP） and adiponectin （ADPN） levels， as well as sphingosine-1-phosphate （S1P） levels in epididymal white adipose tissue （eWAT）， were detected by ELISA. Histomorphological changes in eWAT were monitored via HE staining. Flow cytometry was used to analyze macrophage subtype-related indexes in eWAT， including the total proportion of macrophages， the proportion of M1 macrophages， the proportion of M2 macrophages， and the M1/M2 ratio. Antibody array technology was used to determine the levels of differentially expressed inflammatory factors in eWAT between the model and blank groups， as well as between the ETA and model groups. Western blot and qPCR were used to detect the protein and mRNA expression levels of HIF-1α and S1PR3 in the eWAT， respectively. ResultsCompared to the normal group， the model group showed significantly increased body weight， Lee's index， waist circumference， and FBG， TC， TG， HDL-C， LDL-C， AST， and ALT levels， upgraded LEP and S1P levels， decreased ADPN level and ADPN/LEP ratio， elevated proportion of M1 macrophages and the M1/M2 ratio， reduced proportion of M2 macrophages， and upregulated protein and mRNA expression levels of HIF-1α and S1PR3 （P＜0.05 or P＜0.01）. With the exception of HDL-C， all the abovementioned indicators in the ETA group were significantly improved compared to the model group （P＜0.05 or P＜0.01）. Analysis of differentially expressed inflammatory cytokines revealed that， compared to the normal group， the levels of interleukin-1β （IL-1β）， interferon-γ （IFN-γ）， interleukin-6 （IL-6）， and interleukin-12p70 （IL-12p70） in the eWAT of the model group were elevated； conversely， the levels of interleukin-17 （IL-17）， interleukin-5 （IL-5）， IL-6， and interleukin-23 （IL-23） in the eWAT of the ETA group decreased compared to the model group （P＜0.05 or P＜0.01）. ConclusionETA exerts a weight-reducing effect in obese model mice， and the mechanism may involve inhibition of the HIF-1α/S1P/S1PR3 signaling pathway activation， which shifts macrophage polarization from the M1 to M2 phenotype， thereby alleviating chronic inflammation.

ObjectiveTo investigate the therapeutic efficacy， influencing factors， and safety of a treatment regimen based on coblopasvir hydrochloride capsules/sofosbuvir tablets in patients with chronic hepatitis C virus （HCV） infection in a real-world setting. MethodsA total of 253 patients who attended The Third People’s Hospital of Kunming from September 1， 2021 to May 31， 2024 were enrolled， among whom there were 86 patients with compensated liver cirrhosis （CLC group） and 167 patients with chronic hepatitis C （CHC group）. The patients were treated with coblopasvir hydrochloride capsules （60 mg）/sofosbuvir tablets （400 mg） with or without ribavirin tablets for 12 weeks， and they were followed up for 12 weeks after drug withdrawal. The primary outcome measures were the rate of sustained virologic response at week 12 after treatment （SVR12） and safety， and the secondary outcome measures were the changes in liver function， renal function， blood routine， and liver stiffness measurements （LSM） after 4 weeks of treatment， after 12 weeks of treatment， and at 12 weeks after drug withdrawal. The independent-samples t test and the Mann-Whitney U test were used for comparison of continuous data between two groups， and the Friedman test was used for comparison between multiple groups， while the Bonferroni method was used for paired comparison within each group； the chi-square test was used for comparison of categorical data between two groups. The Logistic analysis was used to investigate related influencing factors. ResultsThe 253 patients with chronic HCV infection had a mean age of 49.38±8.65 years， and there were 151 male patients （59.7%）. Of all patients， 33.99% （86/253） had liver cirrhosis， 25.69% （65/253） had hypertension， 10.67% （27/253） had HIV infection， 8.70% （22/253） had diabetes， 3.95% （10/253） had liver cancer， 1.98% （5/253） had chronic hepatitis B， and 7.91% （20/253） were treatment-experienced patients. As for genotype distribution， 2.77% （7/253） had genotype 1， 12.65% （32/253） had genotype 2， 66.01% （167/253） had genotype 3， 16.60% （42/253） had genotype 6， and 1.98% （5/253） had unknown genotype. The patients had an overall SVR12 rate of 92.09%， with an SVR12 rate of 93.02% in the CLC group and 91.02% in the CHC group. The multivariate logistic regression analysis showed that age （odds ratio ［OR］=1.086， 95% confidence interval ［CI］： 1.007 — 1.170， P=0.032） and HCC （OR=9.178， 95%CI： 1.722 — 48.912， P=0.009） were independent influencing factors for sustained virologic response. Compared with baseline data， the CLC group had significant reductions in alanine aminotransferase （ALT） （χ²=107.103， P0.05）， aspartate aminotransferase （AST） （χ²=90.602， P0.05）， and LSM （χ²=42.235， P0.05） after 12 weeks of treatment， while the CHC group had significant reductions in total bilirubin （χ²=15.113， P0.05）， ALT （χ²=202.237， P0.05）， AST （χ²=161.193， P0.05）， and LSM （χ²=37.606， P0.05）. The incidence rate of serious adverse events was 1.58%， and none of the patients withdrew from drug therapy； the patients with such events were relieved after active symptomatic treatment. The incidence rate of all adverse events was 23.72%， among which fatigue （17.39%） and nausea （2.37%） were the most common adverse events， and these events often disappeared within 2 weeks or were gradually relieved after symptomatic treatment. ConclusionCoblopasvir hydrochloride capsules/sofosbuvir tablets with or without ribavirin tablets has good efficacy and safety in the treatment of chronic HCV infection.

OBJECTIVES: To investigate the therapeutic effects of cimifugin on Crohn's disease (CD)-like colitis in mice and its possible mechanism. METHODS: Thirty adult male C57BL/6 mice were randomized equally into control group, 2,4,6-trinitrobenzenesulfonic acid (TNBS)-induced CD-like colitis model group, and cimifugin treatment (daily gavage at 12.5 mg/kg) group. The therapeutic effect of cimifugin was evaluated by observing changes in body weight, disease activity index (DAI) scores, colon length, histopathological inflammation scores, and inflammatory cytokine levels in the colonic mucosa. Intestinal barrier integrity in the mice was assessed using immunofluorescence assay and Western blotting for claudin-1 and ZO-1; T-helper (Th) cell subset ratios in the mesenteric lymph nodes were analyzed with flow cytometry. Network pharmacology, KEGG enrichment analysis and molecular docking were used to predict the targets of cimifugin and analyze the key pathways and cimifugin-MAPK protein interactions, which were validated by Western blotting in the mouse models. RESULTS: In mice with TNBS-induced colitis, cimifugin treatment significantly attenuated body weight loss and colon shortening, lowered DAI and histopathological scores, decreased IFN-γ and IL-17 levels, and increased IL-4 and IL-10 levels in the colonic mucosa. Cimifugin treatment also significantly improved TNBS-induced claudin-1 dislocation and reduction of goblet cells, upregulated claudin-1 and ZO-1 expressions, reduced Th1 and Th17 cell percentages, and increased Th2 and Treg cell percentages in the colonic mucosa of the mice. KEGG analysis suggested a possible connection between the effect of cimifugin and MAPK signaling, and molecular docking showed strong binding affinity between cimifugin and MAPK core proteins. Western blotting demonstrated significantly decreased phosphorylation levels of JNK, ERK, and p38 in the colonic mucosa of cimifugin-treated mouse models. CONCLUSIONS Cimifugin alleviates TNBS-induced CD-like colitis by repairing intestinal barrier damage and restoring Th1/Th2 and Th17/Treg balance via suppressing MAPK pathway activation.
Animals ; Mice, Inbred C57BL ; Male ; Mice ; Crohn Disease/immunology* ; Colitis/immunology* ; MAP Kinase Signaling System/drug effects* ; Trinitrobenzenesulfonic Acid ; T-Lymphocytes, Helper-Inducer/drug effects* ; Intestinal Mucosa ; Disease Models, Animal

Differentiated thyroid cancer(DTC)accounts for more than 95％of all thyroid cancers.99Tcm-3PRGD2 can specifically bind to integrin αvβ3 receptors highly expressed on the surfaces of neovascular endothelial cells and tumor cells in malignant tumors.With high specificity and safety,99Tcm-3PRGD2 can not only be used for diagnosing DTC and its metastases,but also evaluating the efficacy of anti-angiogenic and anti-αvβ3 therapies.99Tcm-MIBI is a non-specific tumor-avid imaging agent,which may improve diagnostic accuracy combined with 99Tcm-3PRGD2.The research progresses of 99Tcm-3PRGD2 and 99Tcm-MIBI for diagnosis and treatment of DTC were reviewed in this article.

Differentiated thyroid cancer(DTC)accounts for more than 95％of all thyroid cancers.99Tcm-3PRGD2 can specifically bind to integrin αvβ3 receptors highly expressed on the surfaces of neovascular endothelial cells and tumor cells in malignant tumors.With high specificity and safety,99Tcm-3PRGD2 can not only be used for diagnosing DTC and its metastases,but also evaluating the efficacy of anti-angiogenic and anti-αvβ3 therapies.99Tcm-MIBI is a non-specific tumor-avid imaging agent,which may improve diagnostic accuracy combined with 99Tcm-3PRGD2.The research progresses of 99Tcm-3PRGD2 and 99Tcm-MIBI for diagnosis and treatment of DTC were reviewed in this article.