Oral squamous cell carcinoma (OSCC) is a common head and neck malignancy. Approximately 50% to 60% of patients with OSCC are diagnosed at a locally advanced stage (clinical staging III-IVa). Even with comprehensive and sequential treatment primarily based on surgery, the 5-year overall survival rate remains below 50%, and patients often suffer from postoperative functional impairments such as difficulties with speaking and swallowing. Programmed death receptor-1 (PD-1) inhibitors are increasingly used in the neoadjuvant treatment of locally advanced OSCC and have shown encouraging efficacy. However, clinical practice still faces key challenges, including the definition of indications, optimization of combination regimens, and standards for efficacy evaluation. Based on the latest research advances worldwide and the clinical experience of the expert group, this expert consensus systematically evaluates the application of PD-1 inhibitors in the neoadjuvant treatment of locally advanced OSCC, covering combination strategies, treatment cycles and surgical timing, efficacy assessment, use of biomarkers, management of special populations and immune related adverse events, principles for immunotherapy rechallenge, and function preservation strategies. After multiple rounds of panel discussion and through anonymous voting using the Delphi method, the following consensus statements have been formulated: 1) Neoadjuvant therapy with PD-1 inhibitors can be used preoperatively in patients with locally advanced OSCC. The preferred regimen is a PD-1 inhibitor combined with platinum based chemotherapy, administered for 2-3 cycles. 2) During the efficacy evaluation of neoadjuvant therapy, radiographic assessment should follow the dual criteria of Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 and immune RECIST (iRECIST). After surgery, systematic pathological evaluation of both the primary lesion and regional lymph nodes is required. For combination chemotherapy regimens, PD-L1 expression and combined positive score need not be used as mandatory inclusion or exclusion criteria. 3) For special populations such as the elderly (≥ 70 years), individuals with stable HIV viral load, and carriers of chronic HBV/HCV, PD-1 inhibitors may be used cautiously under the guidance of a multidisciplinary team (MDT), with close monitoring for adverse events. 4) For patients with a poor response to neoadjuvant therapy, continuation of the original treatment regimen is not recommended; the subsequent treatment plan should be adjusted promptly after MDT assessment. Organ transplant recipients and patients with active autoimmune diseases are not recommended to receive neoadjuvant PD-1 inhibitor therapy due to the high risk of immune related activation. Rechallenge is generally not advised for patients who have experienced high risk immune related adverse events such as immune mediated myocarditis, neurotoxicity, or pneumonitis. 5) For patients with a good pathological response, individualized de escalation surgery and function preservation strategies can be explored. This consensus aims to promote the standardized, safe, and precise application of neoadjuvant PD-1 inhibitor strategies in the management of locally advanced OSCC patients.

Background With China's socio-economic development, the dietary structure of Chinese residents has gradually shifted from a traditional Eastern pattern characterized by high carbohydrate intake to a relatively high-fat Western dietary model, alongside a growing burden of chronic diseases. However, dietary changes may vary across different occupational groups. Objective To analyze the long-term trends in dietary energy and three major macronutrient intake among various occupational groups aged 18-59 years in nine provinces of China from 1989 to 2018, providing a scientific basis for developing occupation-specific dietary intervention strategies. Methods Based on 11 waves of data (1989–2018) from the China Health and Nutrition Survey (CHNS), 57458 employed individuals aged 18-59 years were selected as observation subjects after applying inclusion and exclusion criteria. Joinpoint regression was used to analyze temporal trends by calculating the annual percentage change (APC) and average annual percentage change (AAPC) with 95% confidence intervals. The analysis covered the energy supply ratio from the three major macronutrients and the proportion of the participants within the acceptable macronutrient distribution ranges (AMDR) for the total occupational population and specific occupational group. Results From 1989 to 2018, the dietary structure of the occupational population in the nine provinces gradually Westernized. The carbohydrate energy supply ratio showed a decreasing trend (AAPC=−0.77%, 95%CI: −1.00%, −0.55%, P<0.05), while the fat energy supply ratio increased (AAPC=1.42%, 95%CI: 1.07%, 1.77%, P<0.05). The protein energy supply ratio remained largely unchanged (AAPC=−0.19%, 95%CI: −0.08%, 0.46%, P>0.05), and the total energy intake declined (AAPC=−0.62%, 95%CI: −0.94%, −0.30%, P<0.05). Among the occupational groups studied, white-collar workers were the first to show characteristics of dietary Westernization. Using the AMDR as the criterion, their average fat energy supply ratio first exceeded the AMDR upper limit (30%) in 1993, and their average carbohydrate energy supply ratio first fell below the AMDR lower limit (50%) in 2006, both time points being earlier than other occupational groups. Agricultural workers lagged in this transition (their average fat energy supply ratio first reached ≥30% in 2011), but their rate of increase in the fat energy supply ratio was the fastest among all occupational groups (AAPC=1.59%, 95%CI: 0.90%, 2.30%, P<0.05; P for trend comparison between groups<0.05). The other three occupational groups (blue-collar workers, service workers, and others) generally fell between these two extremes. Taking the fat energy supply ratio as an example, their AAPCs of increase were 1.02% (95%CI: 0.73%, 1.32%, P<0.05) for blue-collar workers, 0.85% (95%CI: 0.61%, 1.09%, P<0.05) for service workers, and 0.88% (95%CI: 0.58%, 1.17%, P<0.05) for others. Conclusion From 1989 to 2018, the macronutrient structure of the occupational population aged 18-59 years in nine China provinces is gradually Westernized. The energy supply ratios of carbohydrates and proteins primarily face issues of potential inadequacy, while the fat energy supply ratio is excessively high. Furthermore, the patterns of change vary among different occupational groups. It is recommended to propose personalized dietary advice tailored to specific occupations.

Background With China's socioeconomic development, significant lifestyle changes have occurred among occupational groups, leading to alterations in cardiovascular metabolic risk factors. However, few studies have examined the secular trends of these risk factors in China's working population. Objective To analyze the trends in cardiovascular metabolic risk factors among the occupational population in nine provinces of China from 2009 to 2018, and to explore the associations between different occupational types and these risk factors, along with their clustering patterns, thereby providing evidence for targeted interventions. Methods This study utilized data from the China Health and Nutrition Survey (CHNS) in 2009, 2015, and 2018. The dataset covered 13274 employed individuals aged 18-59 years. Only participants with complete blood test results and physical measurement data were included in the final analysis. The average annual percentage change (AAPC) in the positive rates of risk factors was calculated using Joinpoint regression to analyze temporal trends. Multinomial logistic regression and binary logistic regression models were employed to examine the cross-sectional associations between occupational types (categorized as white-collar workers, agricultural workers, blue-collar workers, service workers, and others) and nine cardiovascular metabolic risk factors and their clustering (defined as having ≥2 risk factors) in 2018. Results A total of 8451 participants were included. From 2009 to 2018, significant increasing trends (AAPC>0, P<0.05) were observed for overweight, obesity, central obesity, borderline elevated triglycerides (TG), borderline elevated to elevated total cholesterol (TC), borderline elevated low-density lipoprotein cholesterol (LDL-C), elevated blood pressure and hypertension, diabetes. The most rapid increases were found for obesity (AAPC=6.07%, 95%CI: 3.42%, 8.88%), hypertension (AAPC=4.10%, 95%CI: 0.62%, 7.77%), and central obesity (AAPC=3.27%, 95%CI: 1.24%, 5.36%). The clustering rate of risk factors increased from 62.3% in 2009 to 73.2% in 2018 (AAPC=1.87%, 95%CI: 1.02%, 2.73%). The cross-sectional analysis in 2018, after adjusting for confounders, showed that compared with white-collar workers, blue-collar workers had a significantly lower risk of overweight (OR=0.67, 95%CI: 0.48, 0.95), central obesity (OR=0.65, 95%CI: 0.45, 0.92), and borderline high TG (OR=0.54, 95%CI: 0.35, 0.82). In contrast, agricultural workers had a higher risk of hypertension (OR=1.76, 95%CI: 1.14, 2.72). Conclusion Between 2009 and 2015, the burden of most cardiometabolic risk factors increases significantly among the Chinese occupational population, with the rate of increase slowing by 2018. Risks vary across occupational types, among which blue- collar workers report lower target outcomes. Targeted interventions focusing on the rapidly increasing risk factors and high-risk occupational groups are recommended.

Background The global prevalence of obesity is on the rise and is closely associated with various chronic non-communicable diseases such as cardiovascular diseases and diabetes. There is a relative lack of long-term dynamic studies on compound obesity among occupational populations. Objective To explore the changing trends of compound obesity among different occupational groups aged 18–59 years in nine provinces (autonomous regions, municipalities) of China from 1993 to 2018, and to provide a scientific basis for formulating targeted weight management strategies for occupational populations. Methods A total of 34519 employed adults aged 18–59 years from nine waves of the China Health and Nutrition Survey in1993, 1997, 2000, 2004, 2006, 2009, 2011, 2015, and 2018 were included. Obesity types were determined according to the Chinese Adult Weight Management Guidelines. The Joinpoint regression model was used to calculate the average annual percentage change (AAPC) and annual percentage change (APC) of compound obesity rates. Results From 1993 to 2018, the age-standardized compound obesity rate among the occupational population aged 18–59 years showed an upward trend (AAPC=6.24%, 95%CI: 5.09%, 7.41%, P<0.05). The AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 9.55% (7.51%, 11.64%), 6.18% (4.70%, 7.69%), 5.53% (2.27%, 8.90%), 4.07% (2.40%, 5.77%), and 3.89% (2.16%, 5.65%), respectively, with statistically significant differences (P<0.05). Among males, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 11.52% (7.71%, 15.47%), 7.28% (6.18%, 8.40%), 5.92% (2.28%, 9.69%), 5.56% (2.11%, 9.12%), and 4.22% (2.33%, 6.15%), respectively, with statistically significant differences (P<0.05). Among females, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, and white-collar workers were 7.45% (6.22%, 8.69%), 3.72% (0.84%, 6.67%), and 2.41% (0.17%, 4.70%), respectively, with statistically significant differences (P<0.05). A turning point was observed in the compound obesity rate among female white-collar workers in 2006, with an APC (95%CI) of 9.69% (5.24%, 14.33%) from 2006 to 2008, showing a statistically significant difference (P<0.05), while no significant trend was found from 1993 to 2006 (P>0.05). No significant trends were observed in the age-standardized compound obesity rates among females in other occupational groups and service workers (P>0.05). Conclusion The compound obesity rate among China's occupational population is increasing rapidly, with the growth rate among agricultural workers being particularly prominent. In 2018, male white-collar workers and female agricultural workers exhibit relatively high compound obesity rates, warranting focused attention. Although the overall growth rate among service workers is slower, the expanding workforce in this sector indicates that obesity remains a serious issue. Targeted occupational health and weight management interventions are needed in the future.

Background With rising obesity rates and earlier hypertension onset among occupational populations, there is an urgent need to elucidate the long-term cardiovascular impacts of dynamic body weight patterns. Current evidence lacks trajectory modeling studies examining occupation-specific prevention strategies. Objective To investigate the association between long-term body mass index (BMI) trajectories and incident hypertension risk in Chinese working adults, and to examine occupation-specific heterogeneity in this relationship. Methods A dynamic sub-cohort of 4 413 occupational participants was constructed from ten survey waves (1991–2018) of the China Health and Nutrition Survey (CHNS). Eligible individuals had valid key BMI records at three or more independent follow-ups before the outcome event; the individual baseline was set as the year of their first participation in the survey. Group-based trajectory modeling (GBTM) was used to identify BMI change patterns. Cox proportional hazards regression was used to calculate hazard ratios (HRs) and 95% confidence interval (CI) for hypertension incidence across trajectory groups, with stratified analysis by occupational categories. Results Among 4413 occupational participants, 1441 incident hypertension cases were reported during the follow-up window. Three long-term BMI trajectories were identified: low-stable, moderate-slowly rising, and high-rising. In Model 3 with all selected confounders adjusted, compared with the low-stable group, the moderate-slowly rising group showed a significantly higher risk of incident hypertension (HR=1.28, 95%CI: 1.12, 1.45; P < 0.001), as did the high-increasing group (HR=1.80, 95%CI: 1.45, 2.23; P < 0.001). The stratified analyses revealed occupational differences in the association. Among agricultural workers, the moderate-slowly rising group (HR=1.35, 95%CI: 1.15, 1.57) and the high-rising group (HR=2.00, 95%CI: 1.50, 2.66) both exhibited significantly increased risks of hypertension (P<0.001). Conversely, among white-collar workers, an increased risk of hypertension was observed only in the high-rising group (HR=1.97, 95%CI: 1.23, 3.17; P<0.05). Conclusion Rapid BMI escalation constitutes a significant risk factor for incident hypertension in occupational populations. Targeted long-term weight monitoring and tailored interventions are recommended for high-risk occupations.

Objective To construct large medical model named by "Huaxi HongYi"and explore its application effectiveness in assisting medical record generation. Methods By the way of a full-chain medical large model construction paradigm of "data annotation - model training - scenario incubation", through strategies such as multimodal data fusion, domain adaptation training, and localization of hardware adaptation, "Huaxi HongYi" with 72 billion parameters was constructed. Combined with technologies such as speech recognition, knowledge graphs, and reinforcement learning, an application system for assisting in the generation of medical records was developed. Results Taking the assisted generation of discharge records as an example, in the pilot department, after using the application system, the average completion times of writing a medical records shortened (21 min vs. 5 min) with efficiency increased by 3.2 time, the accuracy rate of the model output reached 92.4%. Conclusion It is feasible for medical institutions to build independently controllable medical large models and incubate various applications based on these models, providing a reference pathway for artificial intelligence development in similar institutions.

Objective To carry out quality control testing of anesthesia ventilators to ensure the reliability and safety during their clinical use.Methods Totally 88 anesthesia ventilators used in some hospital underwent quality control testing in terms of tidal volume,peak airway pressure and positive end-expiratory pressure by using a gas flow analyzer according to JJF(E)61-2020 Calibration Specification of Anesthetic Machines,which included 31 ones,36 ones,12 ones and 9 ones respectively from brand A,B,C and D.The Kruskal-Wallis test was used to analyze the variability of the measured values and errors of the performance indicators between different brands of anesthesia ventilators,the chi-square test was applied to discussing the variability of the accuracy class of the performance indicators between different brands of anesthesia ventilators,and the Pearson correlation coefficient was adopted to investigate the correlation between the years of use and the absolute values of the relative errors of the performance indicators.Results The 88 anesthesia ventilators had the overall pass rate for quality control testing being 42.05%,of which,brand B had the highest pass rate(52.78%)and brand C had the lowest pass rate(8.33%).Brand B gained advantages in tidal volume when compared with brand A,C and D,with the differences being significant(P<0.05);brand A behaved the best in peak airway pressure and positive end-expiratory pressure when compared with brand B,C and D,with the differences being significant(P<0.05).Brand A had the highest proportion(63.08%)of distinction and credit in terms of the three performance indicators.The absolute value of the relative error in tidal volume was positively correlated with the years of use at the 3 measurement points for setting values of 400,600,and 800 mL respectively(P<0.05),and there was a significant correlation between the absolute value of the relative error and the years of use at a peak airway pressure setting of 10 cmH2O(1 cmH2O=98.07 Pa)(P<0.05).Conclusion Quality control testing of anesthesia ventilators contributes to finding the risks during their application,which can be an effective tool to ensure the safety of anesthesia ventilators used in medical institutions.[Chinese Medical Equipment Journal,2025,46(9):75-80]

Thoracic anesthesia with spontaneous respiration represents a form of precision anesthesia meticulously customized to individual patients.Considering the more stringent requirements this anesthesia approach imposes on the regulation of respiratory function,the writing group of the"Consensus of Experts on the Management of Thoracic Anesthesia with Spontaneous Respiration"has formulated elaborate guidelines regarding indications and contraindications,preoperative evaluation,anesthesia implementation,common complications,and treatment strategies.This was accomplished by referencing relevant domestic and international literature and integrating it with actual clinical requirements.The objective is to standardize the rational application of this anesthesia method.

Objective To explore the application of goal-directed fluid therapy based on pulse pressure variation rate(PPV)combined with low central venous pressure(LCVP)technique in liver surgery.Methods A total of 86 patients who underwent liver lobe/segment resection in our hospital from January 2022 to December 2023 were included,and randomly divided into two groups by random sequence method.Patients in the conventional group were treated with LCVP technique,while patients in the test group were given PPV goal-directed intervention on the basis of the conventional group.The surgical indicators,hemodynamic indicators,cognitive function,adverse reactions and recovery of gastrointestinal function of patients in the two groups were compared.Results There was no statistically significant difference in the operation time,Pringle maneuver time,first postoperative exhausting time or first postoperative defecation time of patients between the two groups(P>0.05).However,the intraoperative blood loss,intraoperative fluid infusion volume and hospital stay of patients in the test group were all less/shorter than those in the conventional group(P<0.05).Compared with the time point of T0,patients in the two groups showed increased heart rate(HR)but decreased mean arterial pressure(MAP)and central venous pressure(CVP)at time points of T1 and T2(P<0.05).There was no statistically significant difference in the HR or MAP of patients between the two groups at time points of T0,T1,T2 and T3(P>0.05).At time points of T1 and T2,the CVP of patients in the test group was lower than that in the conventional group(P<0.05).One day after operation,the mini-mental state examination(MMSE)score of patients in the test group was higher than that in the conventional group(P<0.05).The MMSE scores 7 days after operation of patients in the two groups were higher than those 1 day after operation(P<0.05).Patients in the test group had a lower total incidence of adverse reactions and a shorter recovery time of gastrointestinal function than those in the conventional group(P<0.05).Conclusion The goal-directed fluid therapy based on PPV combined with LCVP technique has a good application effect in liver surgery,which can reduce intraoperative blood loss and fluid infusion volume of patients,shorten hospital stay,increase hemodynamic stability,improve postoperative cognitive dysfunction,and promote the recovery of gastrointestinal function,with a relatively high treatment safety.

Medical engineering in TCM medical institutions in Guizhou Province was described in terms of its development status and problems in functional positioning,professional title appraisal,unbalanced staff composition and discipline foun-dation.Some suggestions were put forward including determining the functional positioning and management mode of medical engineering institutions,promoting the professional title system for medical engineering staffs,strengthening medical engineering team and enhancing medical engineering discipline.References were provided for the development of medical engineering in TCM medical institutions in Guizhou Province.[Chinese Medical Equipment Journal,2025,46(5):84-90]