C-Reactive protein(CRP)is an important acute-phase response protein,which is widely used in the assessment of inflammation and cardiovascular disease risk,and acts as a pathogenic factor directly involved in the disease process of certain conditions.Therefore,developing immunosuppressants targeting CRP or investigating its pathogenic mechanisms is of significant importance.Most B-cell epitopes are conformational epitopes,and studying conformational epitopes is typically challenging.To date,no methods have been reported for mapping the conformational epitopes of CRP in solution.In this study,a rapid strategy was developed for studying conformational epitopes by combining hydrogen/deuterium exchange mass spectrometry(HDX-MS)with multiparametric prediction of B-cell epitopes and protein secondary structure analysis.This approach was successfully applied to the binding sites and allosteric targets of the 115 kDa full pentameric CRP and the clinically used monoclonal antibody(mAb)5A8.The results showed that the amino acid residues 84-103,138-146,and 165-173 together form the potential conformational epitopes for mAb 5A8 on CRP,while the amino acid residues 21-32 and 175-178 were identified as potential allosteric targets.The discovery of the mAb 5A8 binding sites and allosteric targets was crucial for improving clinical diagnostic capabilities.Experimental results demonstrated that this workflow allowed rapid conformational epitope mapping of CRP under near-physiological conditions,with advantages such as high speed,high sensitivity,and high throughput.

As a cheap and effective antibiotic,sulfonamides are often used in animal husbandry.However,their residues in animal-derived foodstuffs will threaten human health.Consequently,a high-performance liquid chromatography(HPLC)method integrated with supramolecular solvent microextraction was successfully established for simultaneous quantification of sulfonamide residues sulfachlorpyridazine,sulfamethoxazole,sulfamethoxypyridazine and sulfadimethoxine in milk matrices.This approach exhibited prominent characteristics of operational simplicity,environmental sustainability,and high extraction efficiency.The supramolecular solvents prepared by tributyl octylphosphine tetrafluoroborate and tetrahydrofuran were employed as extraction solvents.The analytes underwent isolation and concentration via dispersive liquid-liquid microextraction(DLLME)prior to quantitative determination using high-performance liquid chromatography(HPLC).The composition and microscopic morphology of the supramolecular solvent were characterized through a series of analytical techniques,including phase diagram,Fourier transform infrared spectroscopy,scanning electron microscopy,and inverted fluorescence microscopy and so on.The density and pH value of supramolecular solvents were determined.The extraction conditions were optimized through the one-factor experiments.The experimental results demonstrated that under the optimal extraction conditions,the four kinds of sulfonamide antibiotics exhibited excellent linearity within respective detection range(R2 ≥ 0.9998)and the limits of detection(LOD)were 0.67-1.45 μg/L.Compared with literature methods,this approach offered some advantages such as simplicity of operation and less reagent consumption,and could be used for analysis and detection of sulfonamide antibiotic residues in milk samples.The present method provided technical support for food safety regulation and paved a new way for the application of supramolecular solvents in the field of extraction and separation.

With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

A single-center, randomized, double-blind, dose-controlled trial of modified Sini Powder in treating mild to moderate generalized anxiety disorder(GAD) in the patients with syndrome of liver depression transforming into fire was conducted at Xiyuan Hospital, China Academy of Chinese Medical Sciences. A total of 80 patients with mild to moderate GAD and the syndrome of liver depression transforming into fire were included. Patients were assigned by the central randomization system at a ratio of 3∶1 into an observation group(n=60, receiving a conventional-dose of granules of modified Sini Powder) and a control group(n=20, receiving low-dose granules with the active ingredients being 50% of that in observation group). Assessments were conducted before treatment(baseline), after 2 weeks of introduction, after 2/4/8 weeks of treatment, and after 4 weeks of follow-up. The results were summarized as follows. In terms of primary outcome indicators, the observation group(62.2%) showed higher total response rate than the control group(26.6%)(P<0.05), and greater Hamilton anxiety scale(HAMA) score reduction after 8 weeks of treatment(P<0.05). In terms of secondary outcome indicators, the HAMA score(somatic anxiety score), traditional Chinese medicine(TCM) syndrome scores, Pittsburgh sleep quality index(PSQI) scale, and clinical global impression(CGI) scale score in the observation group showed a significant compared to the control group at each visit points(P<0.05). Adverse events occurred in 10 cases, including 9(16.9%) cases in the observation group and 1(6.6%) case in the control group. No adverse reaction was observed. In conclusion, conventional-dose modified Sini Powder demonstrated superior efficacy and favorable safety for mild and moderate GAD in the patients with the syndrome of liver depression transforming into fire over low-dose treatment.
Humans ; Male ; Female ; Adult ; Middle Aged ; Double-Blind Method ; Drugs, Chinese Herbal/administration & dosage* ; Anxiety Disorders/drug therapy* ; Treatment Outcome ; Young Adult ; Powders ; Aged ; Liver/drug effects* ; Generalized Anxiety Disorder

Fritillariae Cirrhosae Bulbus is the dried bulb of perennial herbaceous plants in the Fritillaria genus(Liliaceae family) and is a representative traditional Chinese medicinal material with distinctive regional characteristics. Clinically, it is widely used in the treatment of dry cough, bronchial asthma, and other respiratory diseases, possessing significant medicinal and economic value and being highly esteemed in TCM. Currently, Fritillariae Cirrhosae Bulbus primarily relies on wild harvesting. However, due to excessive collection, its wild resources have drastically declined, and all source species have been classified as category Ⅱ in the List of National Key Protected Wild Plants, exacerbating the supply-demand imbalance in the market. To mitigate this issue, large-scale cultivation through the domestication of wild Fritillariae Cirrhosae Bulbus has become an inevitable trend. However, its strict environmental requirements, low propagation efficiency, high seedling mortality, and immature cultivation techniques have severely hindered industrialization. This study investigates the domestication process of Fritillariae Cirrhosae Bulbus, focusing on seed propagation, seedling cultivation, and medicinal material production. It also reviews the species and distribution of wild resources, their endangered status, market supply-demand dynamics, and the historical and current development of domestication. The findings indicate that enhancing propagation efficiency, optimizing cultivation models, and distinguishing between seed propagation and medicinal material production are key measures to accelerate the industrialization of domesticated Fritillariae Cirrhosae Bulbus. This research aims to promote the industrialization of Fritillariae Cirrhosae Bulbus domestication and provide a reference model for the conservation and sustainable utilization of rare and endangered medicinal plant resources.
Fritillaria/chemistry* ; Endangered Species ; Plants, Medicinal/growth & development* ; Drugs, Chinese Herbal/economics* ; China