Background: Transporting preterm neonates soon after birth entails risks. Only one study among many about the beneficial effects of Kangaroo Mother Care (KMC) had cited it as a safe and effective alternative to transport incubators. Objective: To determine if KMC transport could be an alternative to transport incubators by comparing the physiological outcomes of the two transport methods. Methods: This is a parallel non-blinded randomized-controlled trial funded by KMC Foundation, Philippines, Inc, of physiologically stable preterm neonates weighing ≤ 2200 grams delivered at a tertiary government hospital from September 10, 2011, to April 18, 2012. After obtaining written consent from their mothers, participants were randomly assigned to either the intervention or control group. The intervention groups were transported from the delivery room to the NICU while on skin-to-skin contact with the caregiver. In contrast, those in the control group were placed in a transport incubator. Vital signs, oxygen saturation, and blood glucose were measured before transport and upon NICU arrival. Adverse effects were monitored. Data were recorded using a standard database. Results: Ninety-two participants were recruited, forty-six in each arm. Two dropped out. The mean change in heart rate in the KMC transport decreased by 1.6 beats per minute; respiratory rate decreased by 0.18 breaths per minute, the temperature increased by 0.01°C, oxygen saturation decreased by 0.07%, blood glucose decreased by 5.07 mg/dL. The measured physiological parameters were not statistically significant between the two groups. In the KMC transport, there was a decreasing trend in the incidence of hypothermia, hypoglycemia, tachypnea, and tachycardia. Conclusion There are no significant differences in the heart rate, respiratory rate, temperature, oxygen saturation, and blood glucose levels among preterm neonates on KMC transport compared with preterm neonates on transport incubators, which is the current standard of care. The study showed that KMC transport is equally effective as a transport incubator. Hence, in low-resource settings, KMC transport may be used as a safe and effective neonatal transport.
Kangaroo-Mother Care Method ; Incubators

OBJECTIVE: To investigate the risk of adverse events in the clinical use of infant incubators of three kinds of national medical devices in Zhejiang Province. METHODS: Semi-quantitative matrix analysis was used to analyze the risk of adverse events related to incubator products in Zhejiang province from August 2018 to August 2019. RESULTS: Through the risk analysis of 213 cases of adverse events of infant incubator product, the risk point and degree of the product in practical clinical application were evaluated. CONCLUSIONS Through the evaluation results of the production enterprises, medical institutions put forward relevant recommendations to reduce the risk of product use to prevent the recurrence of serious adverse events in the use of the product and spread.
Humans ; Incubators, Infant ; Infant

OBJECTIVE: To study the safety and efficacy of magnetic resonance imaging (MRI)-compatible incubator in cranial MRI examination for neonates. METHODS: A total of 120 neonates who were hospitalized in three hospitals and needed to undergo MRI examination were randomly divided into a control group and an experimental group, with 60 neonates in each group. The neonates in the experimental group were transferred with MRI-compatible incubator and underwent cranial MRI examination inside the MRI-compatible incubator, and those in the control group were transferred using a conventional neonatal transfer incubator and then underwent MRI examination outside the incubator. The two groups were compared in terms of the primary efficacy index (total examination time), secondary efficacy indices (times of examination, MRI completion rate on the first day of use), and safety indices (incidence rate of adverse events and vital signs). RESULTS: There were no significant differences in total examination time, times of examination, and MRI completion rate on the first day of use between the two groups ( CONCLUSIONS The use of MRI-compatible incubator does not significantly shorten the examination time of cranial MRI, but it does provide a relatively stable environment for examination with acceptable safety. There is a need for further studies with a larger population.
Humans ; Incubators, Infant ; Infant, Newborn ; Magnetic Resonance Imaging/instrumentation* ; Prospective Studies ; Skull/diagnostic imaging*

Biological Products ; Compliance ; Ice ; Incubators ; Methods ; Polyethylene ; Polypropylenes ; Polystyrenes ; Product Packaging ; Refrigeration ; Transportation ; Vaccines

The standard terms of infant incubators with high clinical risk and high incidence of adverse events has been tested through the introduction of YY/T 0841-2011 standard, an on-site inspection scheme for using infant incubators has been proposed, the problems existing in the inspection are analyzed and reasonable suggestions are put forward, this paper provides a certain technical reference for the whole life cycle management of the infant incubator.
Humans ; Incubators, Infant ; Infant ; Physical Examination

OBJECTIVES: The aim of this in vitro study was to evaluate the push-out bond strength of a novel calcium silicate-based root repair material-BIOfactor MTA to root canal dentin in comparison with white MTA-Angelus (Angelus) and Biodentine (Septodont). MATERIALS AND METHODS: The coronal parts of 12 central incisors were removed and the roots were embedded in acrylic resin blocks. Midroot dentin of each sample was horizontally sectioned into 1.1 mm slices and 3 slices were obtained from each root. Three canal-like standardized holes having 1 mm in diameter were created parallel to the root canal on each dentin slice with a diamond bur. The holes were filled with MTA-Angelus, Biodentine, or BIOfactor MTA. Wet gauze was placed over the specimens and samples were stored in an incubator at 37°C for 7 days to allow complete setting. Then samples were subjected to the push-out test method using a universal test machine with the loading speed of 1 mm/min. Data was statistically analyzed using Friedman test and post hoc Wilcoxon signed rank test with Bonferroni correction. RESULTS: There were no significant differences among the push-out bond strength values of MTA-Angelus, Biodentine, and BIOfactor MTA (p > 0.017). Most of the specimens exhibited cohesive failure in all groups, with the highest rate found in Biodentine group. CONCLUSIONS: Based on the results of this study, MTA-Angelus, Biodentine, and BIOfactor MTA showed similar resistances to the push-out testing.
Calcium ; Dental Instruments ; Dental Pulp Cavity ; Dentin ; In Vitro Techniques ; Incisor ; Incubators ; Methods ; Miners ; Pemetrexed

OBJECTIVE: We aimed to evaluate the effects of different oxygen conditions (20% [high O₂], 5% [low O₂] and 5% decreased to 2% [dynamic O₂]) on mouse pre- and peri-implantation development using a novel double-channel gas supply (DCGS) incubator (CNC Biotech Inc.) to alter the oxygen concentration during in vitro culture.METHODS: The high-O₂ and low-O₂ groups were cultured from the one-cell to the blastocyst stage under 20% and 5% oxygen concentrations, respectively. In the dynamic-O₂ group, mouse embryos were cultured from the one-cell to the morula stage under 5% O₂ for 3 days, followed by culture under 2% O₂ to the blastocyst stage. To evaluate peri-implantation development, the blastocysts from the three groups were individually transferred to a fibronectin-coated dish and cultured to the outgrowth stage in droplets.RESULTS: The blastocyst formation rate was significantly higher in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group. The total cell number was significantly higher in the dynamic-O₂ group than in the low-O₂ and high-O₂ groups. Additionally, the apoptotic index was significantly lower in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group. The trophoblast outgrowth rate and spread area were significantly higher in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group.CONCLUSION: Our results showed that a dynamic oxygen concentration (decreasing from 5% to 2%) had beneficial effects on mouse pre- and peri-implantation development. Optimized, dynamic changing of oxygen concentrations using the novel DCGS incubator could improve the developmental competence of in vitro cultured embryos in a human in vitro fertilization and embryo transfer program.
Animals ; Apoptosis ; Blastocyst ; Cell Count ; Embryo Transfer ; Embryonic Structures ; Fertilization in Vitro ; Humans ; In Vitro Techniques ; Incubators ; Mental Competency ; Mice ; Morula ; Oxygen ; Trophoblasts

OBJECTIVES: The purpose of this study is to determine methods of dental caries prevention by investigating the use of compounds of Diospyros kaki (D. kaki) peel, Momordica charantia (M. charantia), and Canavalia gladiata (C. gladiata) extracts to limit the cariogenic traits of Streptococcus mutans (S. mutans), such as their ability to proliferate and adhere to the tooth surface. METHODS: Broth microdilution and the agar spreading assay were used to determine the antimicrobial effect and minimum inhibitory concentration (MIC) of S. mutans extracts. In order to identify the adhesive ability of S. mutans at varying concentrations, culture plates were first stained with 1 ml of 0.01% crystal violet for 15 minutes at room temperature, and then eluted with 1 ml of EtOH:Acetone (8:2) solution for 15 minutes in a 37℃ incubator. Eluted solutions were then evaluated by use of a spectrophotometer at 575 nm. RESULTS: Experiments were conducted in order to investigate the effectiveness of D. kaki peel, M. charantia, and C. gladiata extracts on limiting the proliferation of S. mutans. The MIC was measured as an indication of whether the antibacterial activity of D. kaki peel, M. charantia, and C. gladiata extracts had a significant bacteriostatic effect on S. mutans. M. charantia extract was effective for growth inhibition on S. mutans at a minimum concentration of 0.25%. From the adhesion ability assay, M. charantia extract had an anti-adhesive effect. CONCLUSIONS: These results indicate that M. charantia extract demonstrates antibacterial activity and has an anti-adhesive effect on S. mutans. Due to these properties, M. charantia extract may be used to prevent dental caries.
Adhesives ; Agar ; Canavalia ; Dental Caries ; Diospyros ; Gentian Violet ; Incubators ; Microbial Sensitivity Tests ; Momordica charantia ; Momordica ; Streptococcus mutans ; Streptococcus ; Thiram ; Tooth

The purpose of this study was to investigate the chemical properties of some commercially available mouthwashes and to ascertain whether the mouthwashes accelerated mineral loss in dental enamel. Five commercially available mouthwashes were selected from the three largest malls in Korea: Perio Total 7 Aqua Cool Mint Strong FreshTM (PS; LG Household & Health Care Ltd.), Garglin OriginalTM (Dong-A Pharmaceutical Co., Ltd.), Garglin ZeroTM (Dong-A Pharmaceutical Co., Ltd.), Listerine Naturals CitrusTM (LC; IDS Manufacturing Ltd.), and Listerine Cool MintTM (LM; IDS Manufacturing Ltd.). The composition, pH, and titratable acidity of the mouthwashes were investigated. Six bovine teeth specimens were prepared for each mouthwash group. Each of the six specimens was individually immersed in 30 ml aliquots of mouthwash for 1 minute, 30 minutes, 90 minutes, and 120 minutes, and the samples were placed in a 36.5℃ stirred incubator. The degree of mineral loss (ΔF) of the tooth surface area exposed to mouthwash, compared with normal teeth, was analyzed by quantitative light-induced fluorescence-digital. The difference in ΔF among mouthwash groups was examined by the Kruskal-Wallis H test (α=0.05). The contents of mouthwashes differed between Listerine and other products, and the pH ranged from 4.09 to 6.75. The titratable acidity of PS was the lowest at 0.63 ml and highest at 9.25 ml for LM. Minor mineral loss was observed when dental specimens were immersed in the Listerine products (LC and LM) for more than 90 minutes, but the degree of mineral loss for Listerine products was not statistically significantly different from that for groups without mineral loss. In conclusion, all five commercially available mouthwashes showed no harmful effects on tooth enamel.
Delivery of Health Care ; Dental Enamel ; Dental Hygienists ; Family Characteristics ; Humans ; Hydrogen-Ion Concentration ; Incubators ; Korea ; Mentha ; Miners ; Mouthwashes* ; Tooth*

OBJECTIVES: The aim of this in vitro study was to evaluate the effects of the thickness and shade of 3 types of computer-aided design/computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS: A total of 120 specimens of 2 shades (A1 and A3) and 2 thicknesses (1 and 2 mm) were fabricated using VITA Mark II (VM; VITA Zahnfabrik), IPS e.max CAD (IE; IvoclarVivadent), and VITA Suprinity (VS; VITA Zahnfabrik) (n = 10 per subgroup). The amount of light transmission through the ceramic specimens was measured by a radiometer (Optilux, Kerr). Light-cured resin cement samples (Choice 2, Bisco) were fabricated in a Teflon mold and activated through the various ceramics with different shades and thicknesses using an LED unit (Bluephase, IvoclarVivadent). In the control group, the resin cement sample was directly light-cured without any ceramic. Vickers microhardness indentations were made on the resin surfaces (KoopaPazhoohesh) after 24 hours of dark storage in a 37°C incubator. Data were analyzed using analysis of variance followed by the Tukey post hoc test (α = 0.05). RESULTS: Ceramic thickness and shade had significant effects on light transmission and the microhardness of all specimens (p < 0.05). The mean values of light transmittance and microhardness of the resin cement in the VM group were significantly higher than those observed in the IE and VS groups. The lowest microhardness was observed in the VS group, due to the lowest level of light transmission (p < 0.05). CONCLUSION: Greater thickness and darker shades of the 3 types of CAD/CAM ceramics significantly decreased the microhardness of the underlying resin cement.
Ceramics* ; Curing Lights, Dental ; Fungi ; Hardness ; In Vitro Techniques ; Incubators ; Polytetrafluoroethylene ; Resin Cements*