OBJECTIVE: To study the durability of the anti-demineralization effects of fluoride varnish after being applied to dental root surfaces. METHODS: Coronal and radicular dentin samples were prepared from extracted human teeth. Duraphat^® (DP) was applied to the dentine surfaces to form a protective film. The film-dentin interfaces were observed by scanning electron microscopy (SEM) and the fluoride element was analyzed with energy dispersive spectrometer (EDS). Thus, the differences between applying DP on crowns and roots were compared. Radicular dentin samples were prepared and randomly divi-ded into four groups: (1) Blank: DP was not applied, and demineralized in acetic acid (pH 4.5) for 4 days; (2) Blank+aging: DP was not applied, the samples were put into deionized water for 14 days at room temperature, and then demineralized in acetic acid (pH 4.5) for 4 days; (3) DP: DP was applied and demineralized in acetic acid (pH 4.5) for 4 days; (4) DP+aging: DP was applied, the samples were put into deionized water for 14 days at room temperature, and then demineralized in acetic acid (pH 4.5) for 4 days. Finally, SEM observation and EDS analysis of fluoride content were performed on film-dentin interfaces to evaluate the degree of demineralization, the morphology of DP film, and the penetration of fluorine. RESULTS: The immediate penetration depth of fluoride element from DP was deeper in the coronal dentin than that in radicular dentin. The samples in the blank and blank+aging groups demine-ralized significantly after acid etching. The DP group did not undergo demineralization, and the fluorine element penetrated to (76.00±8.94) μm below the interfaces. The structure of the protective film in the DP+aging group was damaged, but the underneath dentin did not undergo demineralization. The fluorine element still remained at a depth of (5.00±3.53) μm below the interfaces. CONCLUSION DP has an anti-demineralization effect on the root surface, and this effect can still be exerted for a period of time after losing the structure of protective film. It has the ability to prevent root caries and a certain durability.
Humans ; Tooth Root/drug effects* ; Fluorides, Topical/pharmacology* ; Tooth Demineralization/prevention & control* ; Dentin/drug effects* ; Fluorides ; In Vitro Techniques ; Cariostatic Agents/pharmacology*

OBJECTIVE: To evaluate the filling quality of single cone obturation in root canal model with irregular structure (Hus&Kim Ⅴ, Yin Ⅱ-type isthmus) which established by 3D printing technology using slices and radiographic methods, in order to provide reference for clinical practice. METHODS: (1) Extracted fresh premolars with Hus&Kim Ⅴ and Yin-type Ⅱ isthmus were collected and scanned by cone-beam computed tomography (CBCT), then standard root canal models were designed and printed. Rhodamine B staining and bias fitting were used to verify the availability of the models. (2) 30 root canal models were randomly divided into 3 groups according to different filling methods (n=10). CONTROL GROUP: vertical compaction obturation; Experimental group 1: single cone obturation with 0.06-taper cone (30#); Experimental group 2: single cone obturation with 0.04-taper cone (35#), GuttaFlow 2 as canal sealers. Slices were taken at 2, 4, 6, and 8 mm from the root apex in the direction perpendicular to the long axis of the root and observed under a stereomicroscope to calculate the percentage of filling area (PAV), percentage of gutta-percha-filled area (PGFA), percentage of sealer filled area (PSFA). (3) On the basis of the above results, two groups (n=4) were selected to further analyze the filling quality by micro-computed tomography (Micro-CT), the filling volume of main root canal and the isthmus were obtained, and the percentage of filling volume (PFV) was calculated. Two-way ANOVA was used to evaluate the differences between the groups, and Tukey' s multiple comparison was used to compare the data between the groups and within the groups. RESULTS: (1) Rhodamine B staining solution could overflow the apical foramen, and the main root canal system and the isthmus area were stained, showed no remnants of support material. The 3D standard deviation of the printed model data was 0.03 mm, and the average fitting distance was 0.02 mm. (2) The PFA of the two experimental groups were both significantly lower than that of the control group (F=45.04, P < 0.01). There was no statistical difference of the PFA at apical 2 and 4 mm between the two experimental groups (P>0.01), but at the middle and coronal portions of the root canal (6, 8 mm), the PFA of the experimental group 1 was higher than that of the experimental group 2 (P < 0.01). PFA in the apical 2, 4 mm of the two experimental groups were both lower than that in the middle and coronal portions 6, 8 mm of the canal (P < 0.01). There was no difference in the PGFA and PSFA between the two experimental groups at the apical 2, 4 mm (F=2.383, P>0.01). (3) The results of Micro-CT showed that the PFV of the experimental group 1 was statistically different with the control group (F=47.33, P < 0.01). The PFV of the experimental group 1 was 54.33%±4.35% in the isthmus and 78.31%±4.21% in the main root canal, which were both lower than the PFV of the control group of 76.48%±4.89% (isthmus) and 86.90%±3.29% (main root canal, P < 0.01). The PFV of the main root canal in the experimental group 1 was higher than that in the isthmus (P < 0.01), while there was no difference between the isthmus and the main root canal in the control group (P>0.01). CONCLUSION In the irregular root canal structure with isthmus, using large-taper gutta-percha can improve the filling quality of the middle and upper part of the canal, but the percentage of filling volume in the isthmus is lower than that of the main canal, and more technical improvements are needed.
Humans ; Root Canal Obturation/methods* ; Cone-Beam Computed Tomography ; Root Canal Filling Materials ; Dental Pulp Cavity/diagnostic imaging* ; Printing, Three-Dimensional ; In Vitro Techniques ; Gutta-Percha ; Bicuspid

Some women may not be able to carry their own children even when capable of conceiving biological offspring. In-vitro fertilization and embryo-transfer (IVF-ET) through surrogacy can now make this possible for these women. Surrogacy however, is still considered unacceptable in the Philippines due to moral and legal issues. This article will explore the need and acceptability of surrogacy in this age of IVF-ET in a country where the prevailing social norms and religious values still disapprove of third-party assisted reproductive technology (ART). Medical indications that would benefit from gestational surrogacy were enumerated and briefly discussed. The differentiation between traditional and gestation surrogacy, as well as commercial and altruistic surrogacy were defined. IVF with gestational surrogacy is a feasible solution to a number of medical difficulties in the carrying of a gestation. Strictly regulating the practice and restricting its use only to cases with legitimate medical indications will prevent its misuse and exploitation. Moral issues, admittedly will still remain an issue particularly for commercial surrogacy. However, limiting these only to altruistic and gestational surrogacy in some cases may be an acceptable compromise.
Child ; Fertilization in Vitro ; Reproductive Techniques, Assisted

In Vitro Fertilization (IVF) is generally accepted as the most effective treatment for infertility. Its success depends on the correct and meticulous implementation of each stage in the procedure. The process of systematically examining embryos is standardized through the use of internationally recognized criteria. On the other hand, the evaluation of oocyte quality continues to be conducted more arbitrarily. A morphologically good quality mature human oocyte is universally described as one that shows a homogeneous cytoplasm, has a single polar body (PB), an approprate zona pellucida (ZP) thickness and a proper perivitelline space (PVS). An abnormality in one or more of these features are very common in IVF cycles and may be related to several factors that are extrinsic and intrinsic to the patient. There has been extensive speculation over whether specific anomalies in the structure of oocytes can suggest a reduced developmental capacity. The most notable among the dysmorphisms of oocytes are the severe morphological deviations, such as smooth endoplasmic reticulum clusters, cytoplasm granularity, and giant oocytes that are related to genetic abnormalities, and extra-cytoplasmic parameters such as PB morphology, the PVS and ZP abnormalities that may indicate oocyte ageing. This paper acknowledges the significance of oocyte morphology grading as an important and practical predictor of a successful IVF outcome and it can serve as a supplementary measure to embryonic assessment in order to optimize efficacy of assisted reproductive technology (ART). It discusses the fundamental knowledge that infertility specialists and embryologists should possess to enable its routine application in the ART laboratory.

Advanced paternal age has been overlooked, and its effect on fertility remains controversial. Previous studies have focused mainly on intracytoplasmic sperm injection (ICSI) cycles in men with oligozoospermia. However, few studies have reported on men with semen parameters within reference ranges. Therefore, we conducted a retrospective cohort study analyzing the reproductive outcomes of couples with non-male-factor infertility undergoing in vitro fertilization (IVF) cycles. In total, 381 cycles included were subgrouped according to paternal age (<35-year-old, 35-39-year-old, or ≥40-year-old), and maternal age was limited to under 35 years. Data on embryo quality and clinical outcomes were analyzed. The results showed that fertilization and high-quality embryo rates were not significantly different (all P > 0.05). The pregnancy rate was not significantly different in the 35-39-year-old group (42.0%; P > 0.05), but was significantly lower in the ≥40-year-old group (26.1%; P < 0.05) than that in the <35-year-old group (40.3%). Similarly, the implantation rate significantly decreased in the ≥40-year-old group (18.8%) compared with that in the <35-year-old group (31.1%) and 35-39-year-old group (30.0%) (both P < 0.05). The live birth rate (30.6%, 21.7%, and 19.6%) was not significantly different across the paternal age subgroups (<35-year-old, 35-39-year-old, and ≥40-year-old, respectively; all P > 0.05), but showed a declining trend. The miscarriage rate significantly increased in the 35-39-year-old group (44.8%) compared with that in the <35-year-old group (21.0%; P < 0.05). No abnormality in newborn birth weight was found. The results indicated that paternal age over 40 years is a key risk factor that influences the assisted reproductive technology success rate even with good semen parameters, although it has no impact on embryo development.
Pregnancy ; Infant, Newborn ; Female ; Humans ; Male ; Adult ; Paternal Age ; Retrospective Studies ; Semen ; Fertilization in Vitro ; Reproductive Techniques, Assisted ; Oligospermia

For infertility treatment, the selection of in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) is decided by multiplying indicators (including fallopian tube factors, semen count, and semen motility), except for sperm morphology. In this study, we conducted a retrospective analysis, from implantation to birth, over a period of 5 years. A total of 1873 couples with primary or secondary fallopian tube factors and an increased defective sperm morphology rate (DSMR) were divided into different groups to receive IVF or ICSI cycles. By comparing the outcomes, we found that the F1 group (DSMR <96%, IVF group 1) had higher cleavage rate, biochemical pregnancy rate, clinical pregnancy rate, and live birth rate than the F3 group (DSMR >98%, IVF group 3; P < 0.05). In contrast, there was no significant difference in the ICSI subgroups. Furthermore, a comparison of the outcomes between IVF and ICSI showed that the S3 group (DSMR >98%, ICSI group 3) had higher cleavage rate (P < 0.001), biochemical pregnancy rate (P < 0.05), clinical pregnancy rate (P < 0.05) and live birth rate (P < 0.05) than the F3 group. However, the ICSI subgroup had a lower two pronuclei fertilization rate than the IVF subgroup (P < 0.05). Our data suggest that the sperm morphology should also be considered when selecting IVF or ICSI combined with other semen parameters before the first assisted reproductive technologies (ART) cycle, especially for males with severe sperm defects.
Female ; Fertilization in Vitro ; Humans ; Male ; Pregnancy ; Pregnancy Rate ; Reproductive Techniques, Assisted ; Retrospective Studies ; Sperm Injections, Intracytoplasmic ; Spermatozoa

Infertility affects 10%-15% of couples worldwide. Of all infertility cases, 20%-70% are due to male factors. In the past, men with severe male factor (SMF) were considered sterile. Nevertheless, the development of intracytoplasmic sperm injection (ICSI) drastically modified this scenario. The advances in assisted reproductive technology (ART), specifically regarding surgical sperm retrieval procedures, allowed the efficacious treatment of these conditions. Yet, before undergoing ICSI, male factor infertility requires careful evaluation of clinical and lifestyle behavior together with medical treatment. Epidemiologically speaking, women whose male partner is azoospermic tend to be younger and with a better ovarian reserve. These couples, in fact, are proposed ART earlier in their life, and for this reason, their ovarian response after stimulation is generally good. Furthermore, in younger couples, azoospermia can be partially compensated by the efficient ovarian response, resulting in an acceptable fertility rate following in vitro fertilization (IVF) techniques. Conversely, when azoospermia is associated with a reduced ovarian reserve and/or advanced maternal age, the treatment becomes more challenging, with a consequent reduction in IVF outcomes. Nonetheless, azoospermia seems to impair neither the euploidy rate at the blastocyst stage nor the implantation of euploid blastocysts. Based on the current knowledge, the assessment of male infertility factors should involve: (1) evaluation - to diagnose and quantify seminologic alterations; (2) potentiality - to determine the real possibilities to improve sperm parameters and/or retrieve spermatozoa; (3) time - to consider the available "treatment window", based on maternal age and ovarian reserve. This review represents an update of the definition, prevalence, causes, and treatment of SMF in a modern ART clinic.
Azoospermia ; Female ; Fertilization in Vitro/methods* ; Humans ; Infertility, Male/therapy* ; Male ; Prevalence ; Reproductive Techniques, Assisted ; Sperm Injections, Intracytoplasmic/methods* ; Spermatozoa

Obtaining high-quality embryos is one of the key factors to improve the clinical pregnancy rate of assisted reproductive technologies (ART). So far, the clinical evaluation of embryo quality depends on embryo morphology. However, the clinical pregnancy rate is still low. Therefore, new indicators are needed to further improve the evaluation of embryo quality. Several studies have shown that the decrease of sperm-specific protein actin-like 7A (ACTL7A) leaded to low fertilization rate, poor embryo development, and even infertility. The aim of this study was to study whether the different expression levels of ACTL7A on sperm can be used as a biomarker for predicting embryo quality. In this study, excluding the factors of severe female infertility, a total of 281 sperm samples were collected to compare the ACTL7A expression levels of sperms with high and low effective embryo rates and analyze the correlation between protein levels and in-vitro fertilization (IVF) laboratory outcomes. Our results indicated that the ACTL7A levels were significantly reduced in sperm samples presenting poor embryo quality. Furthermore, the protein levels showed a significant correlation with fertilization outcomes of ART. ACTL7A has the potential to be a biomarker for predicting success rate of fertilization and effective embryo and the possibility of embryo arrest. In conclusion, sperm-specific protein ACTL7A has a strong correlation with IVF laboratory outcomes and plays important roles in fertilization and embryo development.
Biomarkers/metabolism* ; Female ; Fertilization ; Fertilization in Vitro ; Humans ; Male ; Pregnancy ; Pregnancy Rate ; Reproductive Techniques, Assisted ; Spermatozoa/metabolism*

Aims: The rise of drug-resistant infectious diseases worldwide has spurred experts' interest in developing safe and effective alternative medicine. Melaleuca cajuputi extracts have been shown to exhibit antimicrobial activity in vitro against various bacterial species. This study evaluated the antimicrobial activity of local M. cajuputi leaf extracts (MCEs) against Candida albicans. Methodology and results: Phytoconstituents of aqueous and ethanolic MCEs were screened conventionally using chemical tests. Broth microdilution assay and scanning electron microscope (SEM) were performed to study the anti-Candida activity of the extracts. Both MCEs contained terpenoids, phenols, flavonoids and tannins. Aqueous and ethanolic MCEs showed good fungicidal activity against the tested organism with minimum inhibitory concentration (MIC) values of 50 mg/mL and 25 mg/mL, respectively and a minimum fungicidal concentration (MFC) to MIC ratio of less or equal to 2. Scanning electron micrographs revealed yeast cell surface morphology alterations when treated with both MCEs at 1× MIC. Conclusion, significance and impact of study In conclusion, MCEs have anti-Candida properties and thus, M. cajuputi extract could be an excellent potential source of natural antimicrobial agents for disease remedies.
Anti-Infective Agents ; In Vitro Techniques ; Trees

In the study of embryo development process, the morphological features at different stages are essential to evaluate developmental competence of the embryo, which can be used to optimize and improve the system for
Blastocyst ; Embryo Culture Techniques ; Embryonic Development ; Fertilization in Vitro