PURPOSE: In surgical procedures commonly employed for the management of scaphoid and distal radial fractures, the incision and dissection of the pronator quadratus muscle play a pivotal role. Nevertheless, comprehensive investigations into the anatomical intricacies of the pronator quadratus muscle have been relatively scarce within the clinical community. In light of this, our study endeavors to make a substantive contribution to the medical literature by conducting a meticulous examination of the morphology and morphometry of this muscle. METHODS: This study is a cross-sectional observational study conducted on 22 cadaveric upper extremities (44 sides) preserved between January 2005 and December 2018 at Istanbul University. The study included specimens with intact dissection areas and no prior surgical intervention. Observations focused on the morphometry of the pronator quadratus muscle and related anatomical structures. Statistical analysis was performed using SPSS v23.0, employing Student's t-test and paired t-test, with significance set at p < 0.05. RESULTS: Significant differences were found in the morphometric measurements of the pronator quadratus muscle between the right and left upper extremities, particularly in the vertical distance between the proximal and distal attachment points of the pronator quadratus to the radius (p = 0.008). Additionally, significant differences were observed between male and female samples for radius length (p < 0.001), ulna length (p < 0.001), pronator quadratus width (p < 0.001), and the vertical distance between pronator quadratus attachment points on both the radius (p = 0.001) and ulna (p = 0.001). Furthermore, significant correlations were identified between radius length and parameters such as the vertical distance between pronator quadratus attachment points on both the radius (p = 0.002) and pronator quadratus width (p = 0.030), and between ulna length and parameters including the vertical distances on the radius (p = 0.001) and ulna (p = 0.024). CONCLUSION In light of our comprehensive analysis, which encompasses not only the anatomical features of the pronator quadratus muscle but also its vascular supply and the organization of its neurovascular structures, we posit that our study holds significant implications for the field of orthopedic surgery. We anticipate that this research will furnish valuable insights that can inform and enhance orthopedic procedures.
Humans ; Female ; Male ; Cross-Sectional Studies ; Muscle, Skeletal/anatomy & histology* ; Cadaver ; Aged ; Middle Aged

PURPOSE: End-stage knee osteoarthritis (OA) patients are the primary candidates for total knee arthroplasty (TKA). However, most morphological refinements of TKA prosthesis are based on anatomical data from the knees of healthy individuals. This study aimed to determine whether differences exist in key bony morphological characteristics of the distal femur and proximal tibia between osteoarthritic knees and healthy knees. METHODS: This was a retrospective cross-sectional observational study with a case-control design. Patients who were aged ≥ 50 years, had no history of trauma, fracture, or surgery in the studied knee, and had no obvious knee flexion contracture were included in this study by CT scans. Patients who met the American College of Rheumatology clinical criteria for knee OA were included in the study group. Kellgren-Lawrence grade III or IV knees were studied (for bilateral cases, the more severely affected knee was chosen). Patients who presented with unilateral knee pain or trauma were included in the control group, with CT scans from the opposite (asymptomatic) knee used for analyzing. The studied knee had a Kellgren-Lawrence grade of 0 or I and showed no abnormalities upon physical examination. Archived knee CT scans from 160 patients were divided into 2 groups: the study group (80 moderate-to-severe OA knees) and the control group (80 healthy knees). After 3-dimensional reconstruction and virtual cutting using a CT workstation, 13 morphological parameters of the distal femur and proximal tibia were compared between the 2 groups using independent-samples t-tests. RESULTS: No significant group differences in the femoral anteroposterior dimension (p = 0.797), height of the lateral femoral condyle (p = 0.268), posterior condylar angle (p = 0.240), tibial anteroposterior dimension (p = 0.536), or tibial lateral anteroposterior dimension (p = 0.702) were observed. However, the femoral mediolateral dimension (p = 0.002), distal femoral aspect ratio (femoral mediolateral dimension/femoral anteroposterior dimension) (p < 0.001), height of the femoral trochlear groove (p < 0.001), height of the medial femoral condyle (p < 0.001), tibial mediolateral dimension (p = 0.001), proximal tibial aspect ratio (tibial mediolateral dimension/tibial anteroposterior dimension) (p = 0.004), tibial medial anteroposterior dimension (p = 0.005), and tibial asymmetry ratio (tibial medial anteroposterior dimension/tibial lateral anteroposterior dimension) (p = 0.006) were all significantly greater in the study group. CONCLUSION Knees with moderate-to-severe OA are significantly wider than healthy knees, and OA is a risk factor for increased tibial platform asymmetry. When refining the morphological parameters of TKA prostheses, the specific bony morphological characteristics of OA knees should be taken into account to reduce the potential risk of femoral or tibial component underhang and facilitate optimal balance between tibial component fit and rotational alignment.
Humans ; Osteoarthritis, Knee/pathology* ; Male ; Female ; Cross-Sectional Studies ; Retrospective Studies ; Arthroplasty, Replacement, Knee ; Middle Aged ; Aged ; Case-Control Studies ; Prosthesis Design ; Knee Prosthesis ; Femur/anatomy & histology* ; Tibia/anatomy & histology* ; Tomography, X-Ray Computed ; Knee Joint/diagnostic imaging*

BACKGROUND: The protective effectiveness of an N95 respirator depends on the filtration efficiency of the material from which the N95 respirator is made of, as well as the wearers' facial fit. The facial fit of an N95 respirator mainly depends on the degree of matching between the wearers' facial dimension characteristics and the N95 respirator. Quantitative fit testing objectively evaluates the fit of N95 respirators; however, it is not easy to promote because of the limitations of testing conditions. The aim of this study is to establish a fit prediction model of N95 respirator based on facial images. METHODS: Facial images and fit factor (FF) value of 5 N95 respirators were gathered from 299 medical staffs in 10 hospitals in Beijing. Face geometry measurement was based on 3D face modelling, and the American TSI-8038 Porta Count Pro+ was used to conduct quantitative fit test. Multiple linear regression analysis was employed to identify facial dimensional features that significantly influenced the fit of N95 respirators. Through matching training of facial image and FF values, a fit prediction model has been established, enabling rapid recommendation of N95 respirators meeting the fit standard via facial image recognition. RESULTS: A fit prediction model for N95 respirators based on facial images has been developed, which enables the rapid recommendation of N95 respirators with acceptable FF value for healthcare personnel. The model demonstrated an accuracy of 55.93%, a precision of 98.43%, a recall of 51.65%, and an F1 score of 0.68. CONCLUSIONS It is feasible to utilize computer-based facial recognition technology to rapidly recommend N95 respirators for medical personnel. Given the high level of accuracy achieved, the model demonstrates significant potential for practical application.
Humans ; Face/anatomy & histology* ; N95 Respirators/standards* ; Male ; Adult ; Female ; Middle Aged ; Beijing

OBJECTIVE: To compare the registration accuracy of cone beam computed tomography (CBCT) images while registering to virtual craniodentofacial patients based on soft tissue and the dentition registration method. METHODS: Virtual dentofacial patients out of 13 selected participants who needed CBCT scanning were established by impression with a registered-block impression (RBI) based on digital dental images, three-dimensional (3D) facial images and maxillofacial CBCT images. CBCT images were processed in the Mimics software program, establishing the craniofacial virtual patients based on CBCT images (CCTs). Registration between virtual patients from RBI and CCT, using the soft tissue in lower half face (STE) and dentition (DTN) as the reference area, respectively, forming two kinds of virtual craniofacial patients based on digital dental images, 3D facial images and skeletal images of CBCT (hiding the soft tissue and dental casts from CBCT). Three-dimensional deviation analysis was performed in the upper half face and lower half face of facial images from CBCT between two kinds of virtual craniodentofacial patients and compared with 3D facial images from RBI and recorded as root mean square error (RMSE). Paired-t test was used to compare the deviations of RMSEs between the upper and lower half of the face and the upper half of the face of facial images from CCT, respectively, between the two kinds of virtual craniodentofacial patients based on STE and DTN methods. RESULTS: Paired-t tests showed that there was no statistically significant difference between the upper and lower half faces of facial images from CCT between STE and DTN (P>0.05), but the deviation of RMSEs of the upper half face of facial images from CCT in STE was smaller than those in DTN [(1.696±0.420) mm vs. (1.752±0.424) mm, P < 0.01]. CONCLUSION The registration accuracy of CBCT registered in virtual craniodentofacial patients using soft tissue as the reference area was higher.
Humans ; Cone-Beam Computed Tomography/methods* ; Imaging, Three-Dimensional/methods* ; Male ; Face/anatomy & histology* ; Female ; Adult ; Image Processing, Computer-Assisted/methods* ; Young Adult ; User-Computer Interface

OBJECTIVE: To investigate the changes and symmetry of facial soft tissue during posed smile, to analyze the feature of posed smile in different gender, and verify the reproducibility of posed smile. METHODS: Three-dimensional (3D) facial images of 41 adults (16 males and 25 females with an average age of 26.76±2.70 years) which were taken by FaceScan three-dimensional sensor, including one rest position and two posed smile images. Then these images were imported into 3D soft tissue analysis software for model repositioning. 3D morphable model method (3DMM) was carried out to automatic landmarks setting. After that, the measurement of the eyes, cheeks, nose and perioral area were carried out for 3D soft tissue analysis. Finally, the changes and symmetry of the soft tissues between the two expression states and the gender differences during the posed smiles were compared. Meanwhile, the reproducibility of posed smile was statistically tested. RESULTS: Compared with the rest position, except for nasolabial angle (1.45°±7.65°), the measurements of 3D soft tissue in other region were changed in posed smile (P < 0.001). It should be noted that the eye region was also significantly changed (P < 0.001). Furthermore, the prominent feature of posed smile was that the alar base length became longer, the upper and lower vermilions were narrow and thin, and the mentolabial furrows became shallow. Meanwhile the chin extended anteriorly while the mouth retracted; During posed smile, the labial fissure asymmetry [2.78 (1.73, 3.49) mm], mid-infraorbital asymmetry [2.36 (1.22, 3.27) mm] and outercanthal asymmetry [2.31(1.29, 2.80) mm] were most apparent. Compared with the rest position, the asymmetry was not significantly increased except for cheilion and alar curvature points during the posed smile (P>0.05). In the posed smile, the changes of the right palpebral fissure height and the thickness of lower vermilion (|Li-Stoi| _z) of males were greater than those of females (P < 0.05), and asymmetry of exocanthion and cheekbone increased more than that of females (P < 0.05). There was no obvious difference between the two posed smiles. CONCLUSION In this study, during the posed smile the soft tissues of the eyes, cheeks, nose, lips and chin changed in different degrees, and the asymmetry of cheilion and alar curvature point was greater than that of the rest position; In addition, the reproducibility of posed smile was excellent, which can be a reference for clinical aesthetics and functional research of smile.
Humans ; Smiling/physiology* ; Female ; Male ; Adult ; Imaging, Three-Dimensional/methods* ; Face/anatomy & histology* ; Young Adult ; Facial Expression

OBJECTIVE: To utilize Spinal Cord Toolbox (SCT) to measure the morphological parameters of healthy cervical spinal cords and explore the impact of gender, age and vertebral levels on them. METHODS: A retrospective study was conducted, collecting cervical spinal cord magnetic resonance images of 184 healthy adults. Then, cross-sectional area (CSA), eccentricity, antero-posterior diameter (AP) and right-left diameter (RL) were each computed for every subject. Then, impacts of gender, age and vertebral level on CSA and eccentricity were explored. Moreover, linear correlation analysis was conducted among CSA, AP and RL. RESULTS: The CSA of the cervical spinal cord in males was significantly larger than that in females at C2~C7 segments (P＜0.05) . For C2~C6 segments, there was no statistically significant difference in CSA between the young and middle-aged groups, but both were significantly larger than that of the elderly group. CSA of C4 was the largest whereas CSA of C7 was the smallest. Eccentricity values of C4 and C5 were significantly larger than those of other vertebral levels (P＜0.05). Linear correlation was established between CSA, AP and RL at C2~C7 segments. CONCLUSION The results allow for minimizing inter-subject variability using normalization, and thereby highlighting the importance of morphological parameters as biomarkers in the research of cervical spinal lesions.
Humans ; Female ; Male ; Retrospective Studies ; Middle Aged ; Adult ; Cervical Cord/anatomy & histology* ; Magnetic Resonance Imaging ; Young Adult ; Aged ; Cervical Vertebrae/anatomy & histology*

OBJECTIVES: To establish a three-dimensional (3D) visualization-based classification of the left hepatic portal vein (LHPV) and left hepatic vein (LHV) systems using 3D reconstruction technology to facilitate precise segmental/subsegmental resection of left liver lesions. METHODS: Thin-slice contrast-enhanced CT datasets from 244 patients were reconstructed using MI-3DV Works software. The spatial anatomy (origins, branching patterns, and spatial relationships) of the LHPV and LHV branches was analyzed to determine their 3D classifications and segmental liver divisions for guiding surgical planning for anatomical left liver resections. RESULTS: The 3D models of the third- and fourth-order branches of the LHPV and LHV were successfully reconstructed for all the 244 patients. Two types of the LHPV system were identified, where the LHPV either had independent origins [242 cases (99.1%)] or had right anterior portal branches arising from the LHPV trunk [2 cases (0.9%)]. 3D classifications identified two types of the Segment II of the LHPV (based on branch number), 3 types of the Segment III (by spatial distribution of the branches), compact vs dispersed types of the left lateral lobe (determined by Segment II/III branches proximity), 3 types of the Segment IV (by branch number and origin), and 3 types the fourth hilar vessels (transverse branches of the left portal vein) for their supplied segments. The LHV system had two drainage types into the inferior vena cava, and the umbilical fissure veins were classified into 3 types by drainage patterns and distance to the venous roots. These classifications combined with liver segmentations allowed individualized surgical planning for segment-specific resections. CONCLUSIONS The 3D classification of the LHPV and LHV provides valuable clinical guidance for precise anatomical resections of left liver lesions using liver segments or subsegments as anatomical units to enhance surgical accuracy and improve the outcomes of hepatobiliary surgery.
Humans ; Hepatectomy/methods* ; Imaging, Three-Dimensional ; Hepatic Veins/anatomy & histology* ; Portal Vein/anatomy & histology* ; Liver/surgery* ; Liver Neoplasms/blood supply* ; Tomography, X-Ray Computed ; Female

This study explored how the human cortical folding pattern composed of convex gyri and concave sulci affected single-subject morphological brain networks, which are becoming an important method for studying the human brain connectome. We found that gyri-gyri networks exhibited higher morphological similarity, lower small-world parameters, and lower long-term test-retest reliability than sulci-sulci networks for cortical thickness- and gyrification index-based networks, while opposite patterns were observed for fractal dimension-based networks. Further behavioral association analysis revealed that gyri-gyri networks and connections between gyral and sulcal regions significantly explained inter-individual variance in Cognition and Motor domains for fractal dimension- and sulcal depth-based networks. Finally, the clinical application showed that only sulci-sulci networks exhibited morphological similarity reductions in major depressive disorder for cortical thickness-, fractal dimension-, and gyrification index-based networks. Taken together, these findings provide novel insights into the constraint of the cortical folding pattern to the network organization of the human brain.
Humans ; Cerebral Cortex/anatomy & histology* ; Male ; Female ; Magnetic Resonance Imaging ; Adult ; Connectome/methods* ; Young Adult ; Nerve Net/anatomy & histology* ; Neural Pathways ; Depressive Disorder, Major/diagnostic imaging*

OBJECTIVE: This study aimed to evaluate the relationships of white blood cell (WBC) count, platelet (PLT) count, and PLT-to-WBC ratio (PWR) with muscle mass in Chinese older adults. METHODS: This cross-sectional analysis involved 4,033 Chinese older adults aged ≥ 65 years from the Healthy Ageing and Biomarkers Cohort Study. Muscle mass and total skeletal muscle mass index (TSMI) were measured by bioelectric impedance analysis. WBC, PLT, and PWR were measured using standard methods. Multivariate linear regression was used to examine the associations of WBC count, PLT count, and PWR with TSMI. RESULTS: High WBC count, PLT count, and PWR were associated with low TSMI, with coefficients of -0.0091 (95% confidence interval [ CI]: -0.0142 to -0.0041), -0.0119 (95% CI: -0.0170 to -0.0068), and -0.0051 (95% CI: -0.0102 to -0.0001). The associations between the three inflammatory indices and TSMI were linear. Stratified analyses indicated that the relationship between inflammatory markers and TSMI was more evident in male participants and in individuals aged < 80 years than in their counterparts. CONCLUSION Elevated WBC count, PLT count, and PWR correlated with muscle mass loss. This study highlights the importance of regular monitoring of inflammatory markers as a potential strategy for the screening and management of sarcopenia in older adults.
Humans ; Aged ; Male ; Female ; China ; Leukocyte Count ; Cross-Sectional Studies ; Platelet Count ; Aged, 80 and over ; Muscle, Skeletal/anatomy & histology* ; Independent Living ; Blood Platelets ; Leukocytes ; Sarcopenia

The current low quality of fixed restoration margins is highly correlated with the high incidence of margin-related complications. It is also related to the unclear spatiotemporal geometric position relationship among the consensus definitions of the gingival margin (G), preparation margin (P), and restoration margin (R). This paper discusses the existing problem of the existing term "gingival margin" as a surface anatomical landmark; proposes the term "free gingival margin line" that conforms to geometry and measurement and has importance as a surface anatomical landmark; and clarifies the participants that exist in the marginal area. These participants include the P, R, and G; cementation (adhesive) layer; and gingival sulcus. Moreover, this paper discusses the various iatrogenic damages induced by entering the gingival sulcus via the P, R, and cementing (adhesive) layer. Through the discussion of the design deficiencies of the subgingival and biologically oriented preparation technique, the physiological and clinical importance of the concept of gingival sulcus/gingival sulcus fluid + supercrestal tissue attachment (biological width) = first periodontal protective barrier was analyzed. The value of preserving the physiological role of the gingival sulcus is emphasized. Furthermore, the newly defined RPG distance represents the distance between the successive P or R line and free G line and can be measured in the clinical procedure of tooth preparation. The optimal solution is 0-200 µm, that is, RPG200: the P and R are located on the free G line and the distance between these margins is less than 200 µm. This distance not only has the aesthetic effect of invisibility to the naked eye, it also has a minimal effect on the G and gingival sulcus and is convenient for doctors and patients to clean. Furthermore, in accordance with the positional relationship between the three margins and cementation (adhesive) layer, a new classification of marginal positions is proposed. This classification overcomes the problems of incomplete inclusion objects and uncontrolled risk factors in the previous classification. It also has the advantages of strong practicability, good efficiency of main control geometric quantity, and clear risk control points. The new design scheme and classification of the margi-nal position of RPG200 proposed in this paper provide a new understanding for margin design and complication prevention in the future.
Humans ; Gingiva/anatomy & histology* ; Cementation ; Dental Restoration, Permanent/methods*