BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

Objective:To investigate effects of bone-resorptive lesion on stress distribution of femoral head and on progression in patients with osteonecrosis of the femoral head (ONFH).Methods:From April 2014 to September 2018, a total of 155 femoral heads from 94 patients diagnosed with ARCO stage II and III ONFH were retrospectively reviewed, including 77 males and 17 females with aged 39.90±10.45 years old (ranged from 18-64 years). The hips were divided into two groups according to whether there were bone-resorptive lesions. Further, we compared whether there was statistical difference between the two groups in staging. Then, a case of ARCO II hip joint without bone-resorptive lesion was selected from the included patients. Six femoral head with different diameters of spherical bone-resorptive lesion of 5 mm, 7 mm, 10 mm, 14 mm, 18 mm, and 23 mm were simulated. The influence of bone-resorptive lesion on the stress distribution of necrotic area and a spherical shell extending 1 mm radially around the bone-resorptive lesion was investigated by finite element method in slow walking conditions.Results:Of the 155 ONFH hips, 67 hips are complicated by bone-resorptive lesions, of which 17 were ARCO II, 50 were ARCO III. A total of 88 hips did not contain bone-resorptive lesions, of which 58 were ARCO II, ARCO III 30 cases. The proportion of ARCO stage II in the group with bone-resorptive lesions was significantly higher than that in the group without bone-resorptive lesions (χ 2=25.03, P=0.000). The finite element stress distribution cloud diagram showed that there was a stress concentration area around the bone-resorptive lesions. The maximum von Mises stress around bone-resorptive lesions in the models that contained a synthetic bone-resorptive lesions were significantly higher than those reported in the matched, non-synthetic bone-resorptive lesions finite element models ( t=3.139, P=0.026). The values for maximum von Mises stress around bone-resorptive lesions were 6.94±1.78 MPa and 5.01±0.35 MPa for the group with synthetic bone-resorptive lesions and the group non-synthetic bone-resorptive lesions, respectively. There was a positive correlation between the diameter of bone-resorptive lesions and the maximum and mean von Mises stress of necrotic areas as well as the maximum von Mises stress around bone-resorptive lesions. Conclusion:Bone-resorptive lesions can increase the maximum stress and average stress in the necrotic area. The larger the bone-resorptive lesion, the more the stress increases. There is a stress concentration area around the bone-resorptive lesions, which may accelerate the collapse of the femoral head.

BACKGROUND:Magnesium can be degraded voluntarily in vivo, so a second surgery is avoided. However, its aloys have not been widely used in the clinical orthopedics because there is a lack of accurate and reliable methods to assess its degradationin vivo.
OBJECTIVE:To explore the degradation of micro-arc-oxidized AZ31 magnesium aloy in the femoral condyle of rabbits based on micro-CT images and relative data.
METHODS:Forty micro-arc-oxidized AZ31 magnesium aloys were implanted into the right femoral condyle of 40 New Zealand rabbits. Then 10 right femoral condyles were removed at 5, 10, 15 and 20 weeks after surgery, respectively, to quantitatively analyze and evaluate the degradation of AZ31 magnesium aloys by micro-CT images and relative data.
RESULTS AND CONCLUSION:The surface of AZ31 aloys was corroded progressively with dark color and distorted appearance at 5-20 weeks post implantation. Micro-CT images showed that in the first 5 weeks, the degradation was inactive, and at the 10th week, it turned active; at the 15th week, the corrosion pits were obviously increased in number, and the corrosion area and corrosion speed were enlarged and fastened, respectively. Up to the 20th week, the aloy surfaces were ful of corrosion pits besides roughness and discontinuity. Relevant data analysis showed that the volume fraction of magnesium aloy was 98.6%, 97.1% and 86.4% at the 5th, 10th and 20th weeks after implantation, respectively, and it had a significant decrease from the 10th to 15th week and from the 15th to 20th week (P < 0.05). Within 15-20 weeks, the volume fraction of magnesium aloy was decreased by 6.5% that was the maximum volume reduction per unit cycle. With the progress of corrosion, the surface continuously became rough and vague, and its surface area was enlarged; the ratio of surface area to volume continuously increased, and there was a significant difference at 15 and 20 weeks (P < 0.05). Because of the increasing number of corrosion pits, the cross-sectional radius decreased, which was reflected by the trabecular thickness decreasing from 1.00 to 0.87 mm. From the view of the slope of curve, the trabecular thickness decreased most rapidly at 10-15 weeks. The mineral density of magnesium aloy continuously decreased from 649.302 to 356.445 mg/cm3 during the whole experiment period (P< 0.05). In addition, the micro-CT image density decreased from 679.710 to 644.947 mg/cm3, but there was no significant difference. To conclude, the degradation speed is peaked at 10-20 weeks after implantation, and the content of magnesium aloys decrease with degradation, but the magnesium density has no significant change.

BACKGROUND:Cartilage tissue engineering has been widely used to achieve cartilage regeneration in vitro and repair cartilage defects. Tissue-engineered cartilage mainly consists of chondrocytes, cartilage scaffold and in vitro environment. OBJECTIVE:To mimic the environment of articular cartilage development in vivo, in order to increase the bionic features of tissue-engineered cartilage scaffold and effectiveness of cartilage repair. METHODS: Knee joint chondrocytes were isolated from New Zealand white rabbits, 2 months old, and expanded in vitro. The chondrocytes at passage 2 were seeded onto a scaffold of articular cartilage extracelular matrix in the concentration of 1×106/L to prepare cel-scaffold composites. Cel-scaffold composites were cultivated in an Instron bioreactor with mechanical compression (1 Hz, 3 hours per day, 10% compression) as experimental group for 7, 14, 24, 28 days or cultured staticaly for 1 day as control group. RESULTS AND CONCLUSION:Morphological observations demonstrated that the thickness, elastic modulus and maximum load of the composite in the experimental group were significantly higher than those in the control group, which were positively related to time (P < 0.05). Histological staining showed the proliferation of chondrocytes, formation of cartilage lacuna and synthesis of proteoglycan in the experimental group through hematoxylin-eosin staining and safranin-O staining, which were increased gradualy with mechanical stimulation time. These results were consistent with the findings of proteoglycan kit. Real-time quantitative PCR revealed that mRNA expressions of colagen type I and colagen type II were significantly higher in the experimental group than the control group (P < 0.05). The experimental group showed the highest mRNA expression of colagen type I and colagen type II at 21 and 28 days of mechanical stimulation, respectively (P < 0.05). With the mechanical stimulation of bioreactor, the cel-scaffold composite can produce more extracelular matrix, such as colagen and proteoglycan, strengthen the mechanical properties to be more coincident with thein vivo environment of cartilage development, and increase the bionic features. With the progress of tissue engineering, the clinical bioregeneration of damaged cartilage wil be achieved.

In view of the problems that conventional artificial cartilages have no bioactivity and are prone to peel off in repeated uses as a result of insufficient strength to bond with subchondral bone, we have designed and prepared a novel kind of PVA-BG composite hydrogel as bionic artificial articular cartilage/bone composite implants. The effects of processes and conditions of preparation on the mechanical properties of implant were explored. In addition, the relationships between compression strain rate, BG content, PVA hydrogels thickness and compressive tangent modulus were also explicated. We also analyzed the effects of cancellous bone aperture, BG and PVA content on the shear strength of bonding interface of artificial articular cartilage with cancellous bone. Meanwhile, the bonding interface of artificial articular cartilage and cancellous bone was characterized by scanning electron microscopy. It was revealed that the compressive modulus of composite implants was correspondingly increased with the adding of BG content and the augments of PVA hydrogel thickness. The compressive modulus and bonding interface were both related to the apertures of cancellous bone. The compressive modulus of composite implants was 1.6-2.23 MPa and the shear strength of bonding interface was 0.63-1.21 MPa. These results demonstrated that the connection between artificial articular cartilage and cancellous bone was adequately firm.
Biocompatible Materials ; chemistry ; Biomimetic Materials ; chemistry ; Bone Substitutes ; chemical synthesis ; chemistry ; Cartilage, Articular ; physiology ; surgery ; Compressive Strength ; Humans ; Hydrogel, Polyethylene Glycol Dimethacrylate ; chemistry ; Polyvinyl Alcohol ; chemistry ; Prostheses and Implants ; Prosthesis Design ; Stress, Mechanical