With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.

Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

BACKGROUND: Generalized pustular psoriasis (GPP), a rare and recurrent autoinflammatory disease, imposes a substantial burden on patients and society. Awareness of GPP in China remains limited. METHODS: This cross-sectional survey, conducted between September 2021 and May 2023 across 14 hospitals in China, included GPP patients of all ages and disease phases. Data collected encompassed demographics, clinical characteristics, economic impact, disease severity, quality of life, and treatment-related complications. Risk factors for GPP recurrence were analyzed. RESULTS: Among 127 patients (female/male ratio = 1.35:1), the mean age of disease onset was 25 years (1st quartile [Q1]-3rd quartile [Q3]: 11-44 years); 29.2% had experienced GPP for more than 10 years. Recurrence occurred in 75.6% of patients, and nearly half reported no identifiable triggers. Younger age at disease onset ( P  = 0.021) and transitioning to plaque psoriasis ( P  = 0.022) were associated with higher recurrence rates. The median diagnostic delay was 8 months (Q1-Q3: 2-41 months), and 32.3% of patients reported misdiagnoses. Comorbidities were present in 53.5% of patients, whereas 51.1% experienced systemic complications during treatment. Depression and anxiety affected 84.5% and 95.6% of patients, respectively. During GPP flares, the median Dermatology Life Quality Index score was 19.0 (Q1-Q3: 13.0-23.5). This score showed significant differences between patients with and without systemic symptoms; it demonstrated correlations with both depression and anxiety scores. Treatment costs caused financial hardship in 55.9% of patients, underscoring the burden associated with GPP. CONCLUSIONS The substantial disease and economic burdens among Chinese GPP patients warrant increased attention. Patients with early onset disease and those transitioning to plaque psoriasis require targeted interventions to mitigate the high recurrence risk.
Humans ; Male ; Female ; Psoriasis/pathology* ; Adult ; Cross-Sectional Studies ; Adolescent ; Child ; Young Adult ; Quality of Life ; Middle Aged ; China/epidemiology* ; Recurrence ; Risk Factors ; Surveys and Questionnaires ; East Asian People