Transfusion and Anemia Expertise Initiative-Control/Avoidance of Bleeding developed a strategy for platelet and plasma infusion management in critically ill children based on systematic reviews and consensus meetings of international multidisciplinary experts. One good practice statement and six expert consensus statements were proposed for plasma and platelet transfusions in critically ill children following severe trauma, traumatic brain injury, and/or intracranial hemorrhage. This article introduces the specific methods and basis for the formation of recommendations in this part of the guide.

ObjectiveThis paper aims to investigate the mechanism of Jinyang Dingtong plaster in improving the peripheral pain sensitization and synovial fibrosis in rats with knee osteoarthritis （KOA） by blocking the ion channels of transient receptor potentials （TRPs）. MethodsThe active components in the transdermal absorption solution of Jinyang Dingtong plaster were identified by using ultra-high performance liquid chromatography-electrospray ionization-quadrupole ion trap tandem mass spectrometry （UPLC-MS/MS） technology. A KOA rat model was established through intra-articular injection of monoiodoacetic acid. The rats were randomly divided into blank control group， KOA group， compound Nanxing Zhitong plaster Group， and Jinyang Dingtong plaster group， with eight rats per group. Among them， the rats in the compound Nanxing Zhitong plaster group and the Jinyang Dingtong plaster group were intervened with external application treatment. After the intervention period， the cold and mechanical stimulus pain thresholds of rats in each group were detected， and the transverse diameter of the knee joint was measured. The levels of inflammatory factors in the serum such as interleukin-1β （IL-1β）， tumor necrosis factor-α （TNF-α）， nerve growth factor （NGF）， and calcitonin gene-related peptide （CGRP） were determined by enzyme-linked immunosorbent assay （ELISA）. Protein expression levels of transient receptor potential ankyrin 1 （TRPA1）， transient receptor potential melastatin 8 （TRPM8）， transient receptor potential vanilloid 1 （TRPV1）， transient receptor potential vanilloid 4 （TRPV4）， transforming growth factor-β （TGF-β）， and vascular endothelial growth factor （VEGF） in synovial tissue were detected by Western blot. Histopathological changes in synovial tissue were observed by using hematoxylin and eosin （HE）， Masson， and Sirius red staining， while the expression of type Ⅰ collagen and alpha-smooth muscle actin （α-SMA） was detected by multiplex immunofluorescence. ResultsA total of 35 active components in the transdermal absorption solution of Jinyang Dingtong plaster were identified by UPLC-MS/MS， including phenolic acids， flavonoids， quinones， alkaloids， terpenes， lignans， and coumarins. Among them， the constituents such as berberine， paeoniflorin， ferulic acid， and caffeic acid exhibit clear anti-inflammatory， analgesic， and anti-fibrotic pharmacological effects. Compared to the blank control group， rats in the KOA group showed a significant decrease in cold and mechanical stimuli pain thresholds （P<0.01）. After 14 and 28 days of Jinyang Dingtong plaster intervention， the pain threshold in this group was significantly increased compared to that in KOA group （P<0.01）， showing no significant difference from that in compound Nanxing Analgesic plaster group. Additionally， Jinyang Dingtong plaster reduced the levels of IL-1β， TNF-α， NGF， and CGRP in the serum of KOA rats （P<0.01）， lowered the expression of TRPA1， TRPM8， TRPV1， TRPV4， TGF-β， and VEGF proteins in synovial tissue （P<0.01）， improved synovial pathological damage in KOA rats， and significantly decreased fluorescence intensity of type Ⅰ collagen and α-SMA （P<0.01）. ConclusionJinyang Dingtong plaster can improve the peripheral pain sensitization and synovial fibrosis in KOA rats by downregulating the expression of ion channels of TRPs and related inflammatory and fibrotic factors.

Background With China's socio-economic development, the dietary structure of Chinese residents has gradually shifted from a traditional Eastern pattern characterized by high carbohydrate intake to a relatively high-fat Western dietary model, alongside a growing burden of chronic diseases. However, dietary changes may vary across different occupational groups. Objective To analyze the long-term trends in dietary energy and three major macronutrient intake among various occupational groups aged 18-59 years in nine provinces of China from 1989 to 2018, providing a scientific basis for developing occupation-specific dietary intervention strategies. Methods Based on 11 waves of data (1989–2018) from the China Health and Nutrition Survey (CHNS), 57458 employed individuals aged 18-59 years were selected as observation subjects after applying inclusion and exclusion criteria. Joinpoint regression was used to analyze temporal trends by calculating the annual percentage change (APC) and average annual percentage change (AAPC) with 95% confidence intervals. The analysis covered the energy supply ratio from the three major macronutrients and the proportion of the participants within the acceptable macronutrient distribution ranges (AMDR) for the total occupational population and specific occupational group. Results From 1989 to 2018, the dietary structure of the occupational population in the nine provinces gradually Westernized. The carbohydrate energy supply ratio showed a decreasing trend (AAPC=−0.77%, 95%CI: −1.00%, −0.55%, P<0.05), while the fat energy supply ratio increased (AAPC=1.42%, 95%CI: 1.07%, 1.77%, P<0.05). The protein energy supply ratio remained largely unchanged (AAPC=−0.19%, 95%CI: −0.08%, 0.46%, P>0.05), and the total energy intake declined (AAPC=−0.62%, 95%CI: −0.94%, −0.30%, P<0.05). Among the occupational groups studied, white-collar workers were the first to show characteristics of dietary Westernization. Using the AMDR as the criterion, their average fat energy supply ratio first exceeded the AMDR upper limit (30%) in 1993, and their average carbohydrate energy supply ratio first fell below the AMDR lower limit (50%) in 2006, both time points being earlier than other occupational groups. Agricultural workers lagged in this transition (their average fat energy supply ratio first reached ≥30% in 2011), but their rate of increase in the fat energy supply ratio was the fastest among all occupational groups (AAPC=1.59%, 95%CI: 0.90%, 2.30%, P<0.05; P for trend comparison between groups<0.05). The other three occupational groups (blue-collar workers, service workers, and others) generally fell between these two extremes. Taking the fat energy supply ratio as an example, their AAPCs of increase were 1.02% (95%CI: 0.73%, 1.32%, P<0.05) for blue-collar workers, 0.85% (95%CI: 0.61%, 1.09%, P<0.05) for service workers, and 0.88% (95%CI: 0.58%, 1.17%, P<0.05) for others. Conclusion From 1989 to 2018, the macronutrient structure of the occupational population aged 18-59 years in nine China provinces is gradually Westernized. The energy supply ratios of carbohydrates and proteins primarily face issues of potential inadequacy, while the fat energy supply ratio is excessively high. Furthermore, the patterns of change vary among different occupational groups. It is recommended to propose personalized dietary advice tailored to specific occupations.

Background With China's socioeconomic development, significant lifestyle changes have occurred among occupational groups, leading to alterations in cardiovascular metabolic risk factors. However, few studies have examined the secular trends of these risk factors in China's working population. Objective To analyze the trends in cardiovascular metabolic risk factors among the occupational population in nine provinces of China from 2009 to 2018, and to explore the associations between different occupational types and these risk factors, along with their clustering patterns, thereby providing evidence for targeted interventions. Methods This study utilized data from the China Health and Nutrition Survey (CHNS) in 2009, 2015, and 2018. The dataset covered 13274 employed individuals aged 18-59 years. Only participants with complete blood test results and physical measurement data were included in the final analysis. The average annual percentage change (AAPC) in the positive rates of risk factors was calculated using Joinpoint regression to analyze temporal trends. Multinomial logistic regression and binary logistic regression models were employed to examine the cross-sectional associations between occupational types (categorized as white-collar workers, agricultural workers, blue-collar workers, service workers, and others) and nine cardiovascular metabolic risk factors and their clustering (defined as having ≥2 risk factors) in 2018. Results A total of 8451 participants were included. From 2009 to 2018, significant increasing trends (AAPC>0, P<0.05) were observed for overweight, obesity, central obesity, borderline elevated triglycerides (TG), borderline elevated to elevated total cholesterol (TC), borderline elevated low-density lipoprotein cholesterol (LDL-C), elevated blood pressure and hypertension, diabetes. The most rapid increases were found for obesity (AAPC=6.07%, 95%CI: 3.42%, 8.88%), hypertension (AAPC=4.10%, 95%CI: 0.62%, 7.77%), and central obesity (AAPC=3.27%, 95%CI: 1.24%, 5.36%). The clustering rate of risk factors increased from 62.3% in 2009 to 73.2% in 2018 (AAPC=1.87%, 95%CI: 1.02%, 2.73%). The cross-sectional analysis in 2018, after adjusting for confounders, showed that compared with white-collar workers, blue-collar workers had a significantly lower risk of overweight (OR=0.67, 95%CI: 0.48, 0.95), central obesity (OR=0.65, 95%CI: 0.45, 0.92), and borderline high TG (OR=0.54, 95%CI: 0.35, 0.82). In contrast, agricultural workers had a higher risk of hypertension (OR=1.76, 95%CI: 1.14, 2.72). Conclusion Between 2009 and 2015, the burden of most cardiometabolic risk factors increases significantly among the Chinese occupational population, with the rate of increase slowing by 2018. Risks vary across occupational types, among which blue- collar workers report lower target outcomes. Targeted interventions focusing on the rapidly increasing risk factors and high-risk occupational groups are recommended.

Background The global prevalence of obesity is on the rise and is closely associated with various chronic non-communicable diseases such as cardiovascular diseases and diabetes. There is a relative lack of long-term dynamic studies on compound obesity among occupational populations. Objective To explore the changing trends of compound obesity among different occupational groups aged 18–59 years in nine provinces (autonomous regions, municipalities) of China from 1993 to 2018, and to provide a scientific basis for formulating targeted weight management strategies for occupational populations. Methods A total of 34519 employed adults aged 18–59 years from nine waves of the China Health and Nutrition Survey in1993, 1997, 2000, 2004, 2006, 2009, 2011, 2015, and 2018 were included. Obesity types were determined according to the Chinese Adult Weight Management Guidelines. The Joinpoint regression model was used to calculate the average annual percentage change (AAPC) and annual percentage change (APC) of compound obesity rates. Results From 1993 to 2018, the age-standardized compound obesity rate among the occupational population aged 18–59 years showed an upward trend (AAPC=6.24%, 95%CI: 5.09%, 7.41%, P<0.05). The AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 9.55% (7.51%, 11.64%), 6.18% (4.70%, 7.69%), 5.53% (2.27%, 8.90%), 4.07% (2.40%, 5.77%), and 3.89% (2.16%, 5.65%), respectively, with statistically significant differences (P<0.05). Among males, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, other occupational groups, service workers, and white-collar workers were 11.52% (7.71%, 15.47%), 7.28% (6.18%, 8.40%), 5.92% (2.28%, 9.69%), 5.56% (2.11%, 9.12%), and 4.22% (2.33%, 6.15%), respectively, with statistically significant differences (P<0.05). Among females, the AAPCs (95%CI) for age-standardized compound obesity rates among agricultural workers, blue-collar workers, and white-collar workers were 7.45% (6.22%, 8.69%), 3.72% (0.84%, 6.67%), and 2.41% (0.17%, 4.70%), respectively, with statistically significant differences (P<0.05). A turning point was observed in the compound obesity rate among female white-collar workers in 2006, with an APC (95%CI) of 9.69% (5.24%, 14.33%) from 2006 to 2008, showing a statistically significant difference (P<0.05), while no significant trend was found from 1993 to 2006 (P>0.05). No significant trends were observed in the age-standardized compound obesity rates among females in other occupational groups and service workers (P>0.05). Conclusion The compound obesity rate among China's occupational population is increasing rapidly, with the growth rate among agricultural workers being particularly prominent. In 2018, male white-collar workers and female agricultural workers exhibit relatively high compound obesity rates, warranting focused attention. Although the overall growth rate among service workers is slower, the expanding workforce in this sector indicates that obesity remains a serious issue. Targeted occupational health and weight management interventions are needed in the future.

Background With rising obesity rates and earlier hypertension onset among occupational populations, there is an urgent need to elucidate the long-term cardiovascular impacts of dynamic body weight patterns. Current evidence lacks trajectory modeling studies examining occupation-specific prevention strategies. Objective To investigate the association between long-term body mass index (BMI) trajectories and incident hypertension risk in Chinese working adults, and to examine occupation-specific heterogeneity in this relationship. Methods A dynamic sub-cohort of 4 413 occupational participants was constructed from ten survey waves (1991–2018) of the China Health and Nutrition Survey (CHNS). Eligible individuals had valid key BMI records at three or more independent follow-ups before the outcome event; the individual baseline was set as the year of their first participation in the survey. Group-based trajectory modeling (GBTM) was used to identify BMI change patterns. Cox proportional hazards regression was used to calculate hazard ratios (HRs) and 95% confidence interval (CI) for hypertension incidence across trajectory groups, with stratified analysis by occupational categories. Results Among 4413 occupational participants, 1441 incident hypertension cases were reported during the follow-up window. Three long-term BMI trajectories were identified: low-stable, moderate-slowly rising, and high-rising. In Model 3 with all selected confounders adjusted, compared with the low-stable group, the moderate-slowly rising group showed a significantly higher risk of incident hypertension (HR=1.28, 95%CI: 1.12, 1.45; P < 0.001), as did the high-increasing group (HR=1.80, 95%CI: 1.45, 2.23; P < 0.001). The stratified analyses revealed occupational differences in the association. Among agricultural workers, the moderate-slowly rising group (HR=1.35, 95%CI: 1.15, 1.57) and the high-rising group (HR=2.00, 95%CI: 1.50, 2.66) both exhibited significantly increased risks of hypertension (P<0.001). Conversely, among white-collar workers, an increased risk of hypertension was observed only in the high-rising group (HR=1.97, 95%CI: 1.23, 3.17; P<0.05). Conclusion Rapid BMI escalation constitutes a significant risk factor for incident hypertension in occupational populations. Targeted long-term weight monitoring and tailored interventions are recommended for high-risk occupations.

Background Per- and poly-fluoroalkyl substances (PFAS) can influence gestational diabetes mellitus (GDM); however, current studies on their association are limited and have yielded inconsistent findings. Objective To investigate the association between maternal exposure to PFAS, as measured by urinary concentrations in early pregnancy, and the risk of developing GDM. Methods Based on the Wuhu Birth Cohort in Anhui Province conducted between 2020 and 2023, this study included 1910 pregnant women. Urine samples were collected during the first trimester, and a 75 g oral glucose tolerance test (OGTT) was completed at 24–28 gestational weeks. The concentrations of six PFAS in urine were measured using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Participants were categorized into low, medium, and high exposure groups according to tertiles of individual PFAS concentrations. Logistic regression analysis was employed to assess the potential impact of early-pregnancy PFAS exposure levels on the risk of GDM, with stratified analyses by maternal age and fetal sex. A generalized weighted quantile sum regression (gWQS) model was applied to evaluate the relative weight distribution of the six PFAS in their mixture effect. Results The logistic regression results revealed that both medium exposure to perfluorohexane sulfonate (PFHxS) (OR=1.475, 95%CI: 1.040, 2.093) and high exposure to perfluorononanoic acid (PFNA) (OR=1.430, 95%CI: 1.013, 2.018) were positively associated with diagnosed GDM. This association was more pronounced among women older than 28 years. Among pregnant women carrying male fetuses, high-level exposures to per fluorohexanoic acid (PFHxA) (OR=1.708, 95%CI: 1.006, 2.899) and PFHxS (OR=2.116, 95%CI: 1.247, 3.584) showed positive associations with diagnosed GDM. In contrast, among those carrying female fetuses, moderate perfluorooctanesulfonic acid (PFOS) exposure was associated with a lower risk of GDM (OR=0.542, 95%CI: 0.311, 0.946). The gWQS results demonstrated that PFOS (0.48) and perfluorobutane sulfonate (PFBS) (0.34) contributed the most to the mixture effect. Conclusion Early-pregnancy exposure to PFAS (particularly PFHxS and PFNA) may be an etiological factor for GDM, with maternal age and fetal sex potentially acting as effect modifiers in this association.

ObjectiveThis paper aims to investigate the mechanism of Jinyang Dingtong plaster in improving the peripheral pain sensitization and synovial fibrosis in rats with knee osteoarthritis （KOA） by blocking the ion channels of transient receptor potentials （TRPs）. MethodsThe active components in the transdermal absorption solution of Jinyang Dingtong plaster were identified by using ultra-high performance liquid chromatography-electrospray ionization-quadrupole ion trap tandem mass spectrometry （UPLC-MS/MS） technology. A KOA rat model was established through intra-articular injection of monoiodoacetic acid. The rats were randomly divided into blank control group， KOA group， compound Nanxing Zhitong plaster Group， and Jinyang Dingtong plaster group， with eight rats per group. Among them， the rats in the compound Nanxing Zhitong plaster group and the Jinyang Dingtong plaster group were intervened with external application treatment. After the intervention period， the cold and mechanical stimulus pain thresholds of rats in each group were detected， and the transverse diameter of the knee joint was measured. The levels of inflammatory factors in the serum such as interleukin-1β （IL-1β）， tumor necrosis factor-α （TNF-α）， nerve growth factor （NGF）， and calcitonin gene-related peptide （CGRP） were determined by enzyme-linked immunosorbent assay （ELISA）. Protein expression levels of transient receptor potential ankyrin 1 （TRPA1）， transient receptor potential melastatin 8 （TRPM8）， transient receptor potential vanilloid 1 （TRPV1）， transient receptor potential vanilloid 4 （TRPV4）， transforming growth factor-β （TGF-β）， and vascular endothelial growth factor （VEGF） in synovial tissue were detected by Western blot. Histopathological changes in synovial tissue were observed by using hematoxylin and eosin （HE）， Masson， and Sirius red staining， while the expression of type Ⅰ collagen and alpha-smooth muscle actin （α-SMA） was detected by multiplex immunofluorescence. ResultsA total of 35 active components in the transdermal absorption solution of Jinyang Dingtong plaster were identified by UPLC-MS/MS， including phenolic acids， flavonoids， quinones， alkaloids， terpenes， lignans， and coumarins. Among them， the constituents such as berberine， paeoniflorin， ferulic acid， and caffeic acid exhibit clear anti-inflammatory， analgesic， and anti-fibrotic pharmacological effects. Compared to the blank control group， rats in the KOA group showed a significant decrease in cold and mechanical stimuli pain thresholds （P<0.01）. After 14 and 28 days of Jinyang Dingtong plaster intervention， the pain threshold in this group was significantly increased compared to that in KOA group （P<0.01）， showing no significant difference from that in compound Nanxing Analgesic plaster group. Additionally， Jinyang Dingtong plaster reduced the levels of IL-1β， TNF-α， NGF， and CGRP in the serum of KOA rats （P<0.01）， lowered the expression of TRPA1， TRPM8， TRPV1， TRPV4， TGF-β， and VEGF proteins in synovial tissue （P<0.01）， improved synovial pathological damage in KOA rats， and significantly decreased fluorescence intensity of type Ⅰ collagen and α-SMA （P<0.01）. ConclusionJinyang Dingtong plaster can improve the peripheral pain sensitization and synovial fibrosis in KOA rats by downregulating the expression of ion channels of TRPs and related inflammatory and fibrotic factors.

With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.