BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

To develop and validate a model for predicting intensive care unit (ICU) mortality risk in patients with malignant tumors complicated by acute respiratory failure (ARF) based on an explainable machine learning framework.

Objective To analyze the unexamined items and situations in occupational health examinations of radiation workers, and provide a reference for the revision of occupational health examination standards for radiation workers. Methods A total of 29 630 radiation workers who underwent occupational health examinations at The Third People’s Hospital of Henan Province in 2023 were selected, and the non-examination rates were statistically analyzed according to occupation, gender, and age. Results The overall non-examination rate of non-medical radiation workers was significantly lower than that of the medical radiation workers (P<0.05). The non-examination rate of chest X-rays among medical radiation workers was significantly higher than that of non-medical radiation workers (P<0.05), while no significant differences were found in other items (P>0.05). Gender-stratified analysis showed that the non-examination rate of routine urine tests was higher in females than in males in both medical and non-medical radiation workers (P<0.05). Age-stratified analysis revealed no significant differences in non-examination rates among different age groups in non-medical radiation workers (P>0.05), whereas the chest X-ray non-examination rate was relatively high in medical radiation workers under 30 years old (P<0.05). Conclusion Significant differences were observed in the non-examination rates of occupational health examinations among radiation workers based on occupation, gender, and age. The overall non-examination rate was relatively low in non-medical radiation workers.

Ischemia-reperfusion injury of solid organs is a common complication during transplantation, but its mechanism remains unclear and there are no effective prevention and treatment methods. Rejection is a common immune response of the graft, which is classified into hyperacute rejection, acute rejection and chronic rejection. Rejection and ischemia-reperfusion injury of solid organs may share some common mechanisms, and further research on their correlation may provide strategies for the prevention and treatment of ischemia-reperfusion injury of solid organs. This article mainly reviews the association between rejection and ischemia-reperfusion injury of solid organs.

Diabetic nephropathy （DKD）， as a common microvascular complication of diabetes mellitus （DM）， is a major cause of end-stage renal disease （ESRD）. Its clinical manifestations include increased urinary protein excretion， thickening of the glomerular basement membrane， and renal tubulointerstitial fibrosis. The pathogenesis of DKD is complex and involves multiple factors， including disordered glucose metabolism， hemodynamic alterations， and oxidative stress. Although modern medical approaches can alleviate certain symptoms， they still have limitations such as insufficient therapeutic targeting and prominent adverse effects. The transforming growth factor-β/Smad （TGF-β/Smad） signaling pathway is not only a tissue fibrosis pathway that has attracted considerable attention in recent years， but also regulates multiple protein molecules， including the glomerular podocyte slit diaphragm protein Podocin， interleukin-1β （IL-1β）， and superoxide dismutase （SOD）， thereby participating in various pathological processes and ultimately mediating renal injury. Flavonoid compounds， owing to their sustained pharmacological effects， broad spectrum of action， and high safety profile， have become ideal candidates for targeted therapy research in DKD. Existing studies have shown that these compounds can exert inhibitory effects on renal fibrosis， alleviate inflammatory responses， protect podocytes， and reduce oxidative stress by regulating the interactions between the TGF-β/Smad signaling pathway and the aforementioned protein molecules， thereby maintaining renal structure and function， reducing proteinuria， and significantly improving DKD lesions. This review briefly outlines the composition and functions of the TGF-β/Smad signaling pathway， elucidates the mechanisms by which this pathway regulates DKD， and focuses on summarizing major studies from the past decade on flavonoid-based interventions in DKD through targeted inhibition of the TGF-β/Smad signaling pathway. Furthermore， it discusses the considerable therapeutic potential of flavonoids in the treatment of this disease， aiming to provide a scientific basis for future clinical prevention and treatment of DKD and to promote the development of targeted drugs.

ObjectiveTo address the challenges of unstructured classical Chinese expressions， nested entity relationships， and limited annotated data in famous traditional Chinese medicine（TCM） case records， this study proposes a joint relation extraction framework that integrates data augmentation and entity mapping， aiming to support the construction of TCM diagnostic knowledge graphs and clinical pattern mining. MethodsWe developed an annotation structure for entities and their relationships in TCM case texts and applied a data augmentation strategy by incorporating multiple ancient texts to expand the relation extraction dataset. A cascade binary tagging framework for relation triple extraction（CasRel） model for TCM semantics was designed， integrating a pre-trained bidirectional encoder representations from transformers（BERT） layer for classical TCM texts to enhance semantic representation， and using a head entity-relation-tail entity mapping mechanism to address entity nesting and relation overlapping issues. ResultsExperimental results showed that the CasRel model， combining data augmentation and entity mapping， outperformed the pipeline-based Bert-Radical-Lexicon（BRL）-bidirectional long short-term memory（BiLSTM）-Attention model. The overall precision， recall， and F₁-score across 12 relation types reached 65.73%， 64.03%， and 64.87%， which represent improvements of 14.26%， 7.98%， and 11.21% compared to the BRL-BiLSTM-Attention model， respectively. Notably， the F₁-score for tongue syndrome relations increased by 22.68%（69.32%）， and the prescription-syndrome relations performed the best with the F₁-score of 70.10%. ConclusionThe proposed framework significantly improves the semantic representation and complex dependencies in TCM texts， offering a reusable technical framework for structured mining of TCM case records. The constructed knowledge graph can support clinical syndrome differentiation， prescription optimization， and drug compatibility， providing a methodological reference for TCM artificial intelligence research.

ObjectiveTo explore the mechanism by which Sini San （SNS） inhibits ferroptosis， alleviates inflammation and myocardial injury， and improves myocardial infarction （MI）. MethodsThe active ingredients of SNS were obtained by searching the Traditional Chinese Medicine System Pharmacology Platform （TCMSP） database， its target sites were predicted using the SwissTargetPrediction Database， and the core components were screened out using the CytoNCA plug-in. The targets of MI and ferroptosis were obtained by using GeneCards， Online Mendelian Inheritance in Man （OMIM） database， DrugBank， Therapeutic Target Database （TTD）， FerrDb database and literature review， respectively. The intersection of these targets of SNS-MI-ferroptosis was plotted as a Venn diagram. The protein-protein interaction （PPI） network was constructed using the STRING database， and the visualization graph was prepared using Cytoscape. The core targets were screened out using the CytoNCA plug-in， and the biological functions were clustered by the MCODE plug-in. Gene Ontology （GO） functional enrichment analysis and Kyoto Encyclopedia of Genes and Genomes （KEGG） pathway enrichment analysis were performed using the David database. Molecular docking was performed using AutoDock and visualized with PyMOL2.5.2. The Kunming mice were randomly divided into the control group， the model group， the SNS group， and the trimetazidine （TMZ） group. The mice were subcutaneously injected with isoprenaline （ISO， 5 mg·kg^-1·d^-1） to establish an MI model. The drug was continuously intervened for 7 days. The ST-segment changes were recorded by electrocardiogram （ECG）， and the tissue morphology changes were observed by hematoxylin-eosin （HE） staining. Cardiomyocyte ferroptosis was investigated by transmission electron microscopy. Serum creatine kinase （CK）， creatine kinase isoenzyme （CK-MB）， lactate dehydrogenase （LDH）， reduced glutathione （GSH）， and malondialdehyde （MDA） levels were detected by biochemical assay. Enzyme-linked immunosorbent assay （ELISA） was used to detect serum levels of interleukin （IL）-6 and 4-hydroxynonenal （4-HNE）. Immunohistochemical staining was employed to detect IL-6 and phosphorylated signal transducer and transcription activator 3 （p-STAT3） in cardiac tissues. Western blot was used to detect STAT3 and p-STAT3 in cardiac tissues. Real-time PCR was used to detect the levels of IL-6， IL-18， solute carrier family 7 member 11 （SLC7A11）， arachidonic acid 15-lipoxygenase （ALOX15）， and glutathione peroxidase 4 （GPx4） in cardiac tissues. ResultsA total of 121 active ingredients of SNS were obtained， and 58 potential targets of SNS in the treatment of MI by regulating ferroptosis were screened. The three protein modules with a score5 were mainly related to the inflammatory response. The GO function was mainly related to inflammation， and KEGG enrichment analysis showed that SNS mainly regulated ferroptosis- and inflammation- related signaling pathways. Molecular docking indicated that the core component had a higher binding force to the target site. Animal experiments confirmed that SNS reduced the level of p-STAT3 （P0.01）， down-regulated the expression of ALOX15 mRNA （P0.01）， up-regulated the level of serum GSH， and the expressions of SLC7A11 and GPx4 mRNA， reduced MDA and 4-HNE levels （P0.05， P0.01）. Additionally， SNS improved the mitochondrial injury induced by cardiomyocyte ferroptosis， reduced the area of MI， alleviated inflammation and myocardial injury， lowered the levels of serum CK， CK-MB， LDH， IL-6， and the mRNA expression levels of IL-16 and IL-18 （P0.05）， and improved ST segment elevation. ConclusionSNS can reduce ISO-induced STAT3 phosphorylation levels， inhibit ferroptosis in cardiomyocytes， alleviate inflammation and myocardial injury， thereby improving MI.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.