In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

The stability of ammonium ion selective electrode is an important indicator to ensure accurate monitoring of ammonia nitrogen concentration in drinking water.However,in long-term monitoring process,interfering ions and water molecules in water samples may penetrate into the interior of the ammonium ion selective electrode to form a water layer,which affects the potential response and stability of the electrode.Perfluorooctanoic acid is a low surface energy material,and doping it in polyaniline can reduce surface energy of the composite and improve surface roughness.In this work,five ammonium ion selective electrodes were prepared by doping polyaniline with different concentrations of perfluorooctanoic acid as a solid contact layer,which made the solid contact layer of electrode had hydrophobic properties,thereby improving stability of the ammonium ion selective electrode.The stability of the ion-selective electrode was evaluated by potential drift experiment,and the optimal doping concentration of perfluorooctanoic acid in the sediment solution was determined to be 5 mmol/L.The experiment results showed that the solid contact layer had a water contact angle of 132o under the doping concentration,the potential drift rate was 41.66 μV/h,and potential drift rate in the aqueous layer test was 1.31 mV/h,which were all better than those of the unmodified electrode.The standard deviation of the electrode potential was 1.42 mV,which was obviously superior to that of the unmodified electrode.The characteristics of high stability of the electrode made it suitable for long-term monitoring of ammonia nitrogen content in water samples.

Necrotizing enterocolitis（NEC）is a gastrointestinal emergency commonly seen in premature infants，and its etiology and high-risk factors have not been fully elucidated.Premature infants who receive blood component transfusions are at significantly increased risk of developing NEC，with a higher incidence and mortality rate.This review focuses on a comprehensive analysis of the association between multiple blood component transfusions and NEC，the pathogenesis，prevention measures，and the threshold of blood component transfusions，aiming to provide a reference for the safe and rational use of blood component transfusions in clinical practice，and to guide fulture research directions.

BACKGROUND:Many recent studies have shown a close relationship between inflammatory cytokines and osteoporosis and bone mineral density(BMD).However,the causal relationship between inflammatory cytokines and BMD has not been fully revealed. OBJECTIVE:To explore the potential causal relationship between inflammatory cytokines and BMD using a two-sample Mendelian randomization analysis. METHODS:The single nucleotide polymorphisms associated with 41 circulating inflammatory cytokines were selected from the open database of genome-wide association studies(GWAS)as instrumental variables.The GWAS data about BMD were from the Genetic Factors for Osteoporosis Consortium,involving a total of 32 735 individuals of European ancestry.Inverse variance weighting was used as the primary analysis to evaluate the causal effect.Weighted median,MR Egger regression,simple mode,and weighted mode methods were used to supplement the explanation.We used the MR-Egger intercept and MR-PRESSO method to conduct a pleiotropy test,the Cochran's Q test was used to determine whether there was heterogeneity in the results,and the leave-one-out method was used to evaluate the stability of the results.In addition,to more accurately assess the causality,the Bonferroni-corrected test was used to identify inflammatory cytokines that have a strong causal relationship with BMD. RESULTS AND CONCLUSION:(1)According to the results of the inverse variance weighting method,we found a positive causal relationship between interleukin-8 and lumbar spine BMD[β=0.075,95%confidence interval(CI):0.033-0.117,P=0.000 5),while a negative causal relationship between interleukin-17 and lumbar spine BMD(β=-0.083,95%CI:-0.152 to-0.014,P=0.018).There might be a negative causal relationship between tumor necrosis factor b and femoral neck BMD(β=-0.053,95%CI:-0.088 to-0.018,P=0.003),while a positive causal relationship between basic fibroblast growth factor and femoral neck BMD(β=0.085,95%CI:0.016-0.154,P=0.015).There might be a negative causal relationship between macrophage inflammatory protein-1a and total body BMD(β=-0.056,95%CI:-0.105 to-0.007,P=0.025).There was a negative causal relationship between interleukin-5(β=-0.019,95%CI:-0.031 to-0.006,P=0.004),stromal cell-derived factor-1a(β=-0.022,95%CI:-0.038 to-0.005,P=0.010),hepatocyte growth factor(β=-0.021,95%CI:-0.041 to-0.002,P=0.030),interleukin-4(β=-0.016,95%CI:-0.032 to-0.001,P=0.034)and heel BMD,while a positive causal relationship between nerve growth factor(β=0.019,95%CI:0.002-0.036,P=0.033),granulocyte colony-stimulating factor(β=0.011,95%CI:0.000-0.022,P=0.050),and heel BMD.Meanwhile,after the Bonferroni-corrected test,there was a strong positive causal effect between interleukin-8 and lumbar spine BMD(P=0.000 5).And consistent directional effects for all analyses were observed in MR Egger,weighted median,simple mode,and weighted mode methods.(2)Sensitivity analyses revealed no heterogeneity,pleiotropy,or outliers for the causal effect of circulating inflammatory cytokines on BMD.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: To identify the optimal surgical technique for single-level anterior cervical discectomy and fusion (ACDF), this study compared surgical outcomes and incidence of adjacent segment degeneration (ASD) in patients undergoing single-level ACDF using cage alone single-level fusion and plate fixation techniques. Methods: This single-center retrospective study (2003–2018) included patients who underwent single-level ACDF with either plate fixation (PLATE) or cage (CAGE) alone. The radiologic and clinical outcomes between the 2 surgical groups were compared over a 4-year follow-up period. Outcomes of interest included parameters related to range of motion, sagittal alignment, as well as fusion, subsidence, and ASD rates. Clinical outcomes were evaluated using the Neck Disability Index (NDI) and visual analog scale (VAS) for pain. Dysphagia and hoarseness rates were estimated based on medical records. Results: Forty-seven patients were included (n=17 in CAGE group). In the CAGE group, 94.1% of the patients had Bridwell grade 1 or 2, compared to 83.3% in the PLATE group (p = 0.396). Subsidence occurred in 12.5% and 3.6% of the CAGE and PLATE cases, respectively (p = 0.543). Segmental kyphosis progressed in the CAGE group compared to the PLATE group at 12, 24, and 48 months (p < 0.001). Radiographic ASD was observed in 41.2% and 30.0% of patients in the CAGE and PLATE groups, respectively, with a higher incidence in the upper segments for both groups. Preoperative NDI scores were similar between the groups; however, postoperatively, the CAGE group had significantly lower NDI scores (3.50 ± 2.74 vs. 8.00 ± 5.81) at 4 years (p = 0.020). Neck pain VAS scores also showed significant improvement in the CAGE group (2.33 ± 2.94) compared with that in the PLATE group (3.07 ± 2.31) at 4 years (p = 0.045). Both groups showed comparable arm pain VAS scores at 2 and 4 years postoperatively. Postoperative dysphagia occurred in 1 patient in the PLATE group, resolving almost completely by 1 year. Conclusions Single-level ACDF using a cage alone technique demonstrated favorable radiologic and clinical outcomes overall compared to plate-augmented ACDF. However, plate augmentation is recommended for patients with severe cervical kyphosis or those at high risk of subsidence.

Background: Sarcopenia, a multifactorial disorder involving metabolic disturbance, suggests potential for metabolite biomarkers. Carnitine (CN), essential for skeletal muscle energy metabolism, may be a candidate biomarker. We investigated whether CN metabolites are biomarkers for sarcopenia. Methods: Associations between the CN metabolites identified from an animal model of sarcopenia and muscle cells and sarcopenia status were evaluated in men from an age-matched discovery (72 cases, 72 controls) and a validation (21 cases, 47 controls) cohort. Results: An association between CN metabolites and sarcopenia showed in mouse and cell studies. In the discovery cohort, plasma C5-CN levels were lower in sarcopenic men (P=0.005). C5-CN levels in men tended to be associated with handgrip strength (HGS) (P=0.098) and were significantly associated with skeletal muscle mass (P=0.003). Each standard deviation increase in C5-CN levels reduced the odds of low muscle mass (odd ratio, 0.61; 95% confidence interval [CI], 0.42 to 0.89). The area under the receiver operating characteristic curve (AUROC) of CN score using a regression equation of C5-CN levels, for sarcopenia was 0.635 (95% CI, 0.544 to 0.726). In the discovery cohort, addition of CN score to HGS significantly improved AUROC from 0.646 (95% CI, 0.575 to 0.717; HGS only) to 0.727 (95% CI, 0.643 to 0.810; P=0.006; HGS+CN score). The improvement was confirmed in the validation cohort (AUROC=0.563; 95% CI, 0.470 to 0.656 for HGS; and AUROC=0.712; 95% CI, 0.569 to 0.855 for HGS+CN score; P=0.027). Conclusion C5-CN, indicative of low muscle mass, is a potential circulating biomarker for sarcopenia in men. Further studies are required to confirm these results and explore sarcopenia-related metabolomic changes.

Background: Intellectual disability (ID) may be associated with an increased risk of diabetes mellitus (DM). However, evidence from longitudinal studies is scarce, particularly in Asian populations. Methods: This retrospective cohort study used representative linked data from the Korea National Disability Registration System and the National Health Insurance Service database. Adults (≥20 years) who received a national health examination in 2009 (3,385 individuals with ID and 3,463,604 individuals without ID) were included and followed until 2020. ID was identified using legal registration information. Incident DM was defined by prescription records with relevant diagnostic codes. Multivariable-adjusted Cox proportional hazards regression models were used to estimate the adjusted hazard ratio (aHR) and 95% confidence interval (CI) for DM risks in individuals with ID compared to those without ID. Results: Over a mean follow-up of 9.8 years, incident DM occurred in 302 (8.9%) individuals with ID and 299,156 (8.4%) individuals without ID. Having ID was associated with increased DM risk (aHR, 1.38; 95% CI, 1.23 to 1.55). Sensitivity analysis confirmed a higher DM risk in individuals with ID (aHR, 1.39; 95% CI, 1.24 to 1.56) than those with other disabilities (aHR, 1.11; 95% CI, 1.10 to 1.13) or no disability (reference). Stratified analysis showed higher DM risk in non-hypertensive subjects (aHR, 1.63; 95% CI, 1.43 to 1.86) compared to hypertensive subjects (aHR, 1.00; 95% CI, 0.80 to 1.26; P for interaction <0.001). Conclusion Adults with ID have an increased risk of developing DM, highlighting the need for targeted public health strategies to promote DM prevention in this population.