OBJECTIVE:The clinical efficacy and safety of preoperative intravenous glucocorticoids in patients undergoing lower limb joint arthroplasty remain controversial.Therefore,we conducted a meta-analysis based on randomized controlled trials to evaluate the efficacy and safety of preoperative intravenous glucocorticoids for clinical treatment using lower limb joint arthroplasty. METHODS:We systematically searched randomized controlled trials on the effects of preoperative intravenous glucocorticoids on the efficacy and safety of lower limb joint arthroplasty in Chinese and foreign databases up to June 2023,including PubMed,Embase,Web of Science,Cochrane Library,WanFang Data,and CNKI.The trial group was injected with intravenous glucocorticoid before operation to control pain.The control group received placebo or intravenous saline.Outcome measures included postoperative resting pain score,postoperative C-reactive protein,postoperative 5-m walking test pain score,length of hospital stay,operation time,postoperative morphine opioid supplemental dose,postoperative nausea and vomiting reaction,and postoperative periprosthesis infection complications. RESULTS:(1)A total of nine randomized controlled trials included 613 patients(n=311 in the glucocorticoid group,n=302 in the control group).(2)Compared with the control group,preoperative intravenous administration of glucocorticoids significantly reduced the resting pain scores of patients at 6 and 12 hours after surgery,as well as the pain scores of patients walking for 5 m on the first day after surgery.In addition,the need for additional morphine opioids and postoperative nausea and vomiting were reduced in the glucocorticoid group.The inflammatory C-reactive protein was lower than that of the control group within three days after surgery,and the length of hospital stay was shortened after intravenous glucocorticoid injection(P<0.05).(3)However,there were no significant differences in the incidence of infection after arthroplasty,operation time,and pain scores at 24 and 48 hours between the two groups. CONCLUSION:As an effective perioperative multi-modal analgesia protocol,intravenous injection of glucocorticoids before surgery is an effective and safe method to reduce hyperacute pain and improve joint mobility in patients with lower limb joint arthroplasty.More research is needed to determine the optimal dose and type of glucocorticoids for maximum pain control.

This paper presents an automatic acquisition and analytic procedure of acupuncture manipulation based on optical navigation, aiming at solving the shortcomings of existing acquisition methods of acupuncture manipulation. An acquisition holder installed at the handle tail of filiform needle was designed to display the movement trajectory of the needle during acupuncture delivery by collecting the movement trajectory of holder. The 3-month old male Bama miniature pig was selected as the experimental subject, and 6 points, "Bojian" "Qiangfeng" "Housanli" "Xiaokua" "Huiyang" (BL35) and "Baihui" (GV20), were selected during acupuncture manipulation. The optical navigation system was used to collect the real-time data, and these data were per-processed and analyzed using mean filtering and Fourier transform. The acupuncture procedure was divided into 3 stages, inserting, lifting-thrusting, and twisting. The results showed that the accuracy was 96.3% at lifting-thrusting stage, and that was 100.0% at twisting stage. The decomposition effect of the entire procedure was satisfactory. This study provides a new approach to the quantitative analysis of acupuncture manipulation. In the future, it needs to further optimize the algorithm and expand the sample size so as to improve the accuracy of this analytic technique.
Acupuncture Therapy/methods* ; Male ; Animals ; Swine ; Acupuncture Points ; Humans ; Swine, Miniature ; Needles

ObjectiveTo analyze the spectrum distribution characteristics of high-intensity productive noise in key industries in Guangdong Province. Methods A total of 2 806 enterprises in 21 prefecture-level cities in Guangdong Province were selected as the study subjects using the stratified sampling method. On-site investigations were conducted in workplaces. Noise in workplaces and work-sites, and the noise spectrum of the workplaces with sound pressure level ≥85.0 dB(A) were detected. Results The noise of a total of 23 076 workplaces and 20 969 work sites from 30 key industries were monitored. The median (M) and 25th and 75th percentiles (P₂₅, P₇₅) of workplace sound pressure level were 82.3 (78.6, 86.5) dB(A). The rate of the noise exceeded national standard was 30.4%. The sound pressure level M (P₂₅, P₇₅) of work-site was 78.6 (70.0, 83.5) dB(A). The rate of the noise exceeded national standard was 18.0%. Workplace noise and work site noise were positively correlated (Spearman correlation coefficient=0.86, P<0.01). The rate of the noise exceeded national standard was 46.5% in key work sites where the rate of noise exceeded the national standard was ≥25.0%, and corresponding rate of the workplace noise exceeded national standard was 58.1%. The noise spectrum result of 5 636 workplaces sound pressure level>85.0 dB(A) showed that most of the noise source was from grinding machines (441 cases), and the highest average sound pressure level of noise source was from screening machines [93.0 dB(A)]. Cluster analysis results showed that the main noise sources could be divided into three categories, including wideband noise with levels >80.0 dB in all frequency bands except 8 000.0 Hz, medium-high-frequency noise with the highest sound pressure level at 1 000.0, 2 000.0, and 4 000.0 Hz and low frequencies <75.0 dB, and medium-low-frequency noise below 500.0 Hz with sound pressure level >85.0 dB. Conclusion The rate of the noise exceeded national standard in workplace of key industries in Guangdong Province is high, involving a wide range of industries, with high sound pressure levels and obvious spectrum characteristics of corresponding noise sources. Corresponding noise control strategies can be formulated based on different spectrum characteristics and magnitudes.

Children and adults differ significantly in physiology,biochemistry and immune function,which leads to sig-nificant differences in blood transfusion strategies between children and adults.To guide the clinical transfusion practice of pediatric patients and improve the prognosis of children,the National Health Commission organized the formulation and re-lease of the health industry standard Guideline for Pediatric Transfusion(WS/T 795-2022).This paper will briefly introduce some concepts that help understand of the Standard and the preparation process of the Standard,and explain and interpret the preparation of the"scope","general provisions"and"factors to consider"of the Standard,hoping to contribute to the understanding and implementation of the Standard.

Objective:To build a training and promotion model for traditional Chinese medicine nursing tourism project in Zhejiang Province, promoting homogeneous management and standardized promotion of traditional Chinese medicine nursing tourism project.Methods:From July 2022 to June 2023, purposive sampling was used to select 20 experts from ClassⅢ traditional Chinese medicine hospitals in Zhejiang Province for Delphi expert consultation. Two rounds of consultation were conducted via email to construct a training and promotion model for traditional Chinese medicine nursing tourism project in Zhejiang Province.Results:In the two rounds of expert consultation, the effective response rate of the questionnaire was 100% (20/20), the familiarity coefficient of the experts was 0.89, the judgment coefficient was 0.94, and the authority coefficient of the experts was 0.92. The Kendall harmony coefficients for two rounds of consultation were 0.268 and 0.105, respectively, with statistically significant differences ( P<0.001). The training and promotion model for traditional Chinese medicine nursing tourism project in Zhejiang Province included six first-level indicators, 22 second-level indicators, 74 third-level indicators, and 28 fourth-level indicators. Conclusions:The construction process of the training and promotion model for traditional Chinese medicine nursing tourism project in Zhejiang Province is rigorous and standardized, providing reference for training and helping to promote innovation and sustainable development of traditional Chinese medicine nursing.

Objective To summarize the clinical characteristics of patients with occupational melanosis. Methods Diagnostic data of 69 patients with occupational melanosis was analyzed using retrospective analysis. Results The main occupational hazards for the 69 patients with occupational melanosis were coal tar, petroleum and its fractionated products, pigments and dyes and their intermediates, rubber additives and rubber products. The median length of occupational exposure and disease latency were 8.0 and 6.0 years, respectively, with a highly positive correlation between them (Spearman correlation coefficients=0.962, P<0.01). Skin lesions were mainly found on exposed areas such as the face-to-neck and limbs, prevalence of 94.2% and 75.4% respectively. And 78.3% of patients had skin lesion on more than two sites. The lesions were mostly in the form of irregular flakes (59.4%), with a gray-black color (44.9%). About 43.5% of patients experienced skin itching. Complete blood count, liver function, and kidney function were all within normal ranges. Skin biopsy results showed that epidermal hyperkeratosis, thinning of the spinous layer, liquefaction degeneration of basal cells, increased superficial dermal melanocytes, and infiltration of lymphocytes, histiocytes, and melanocytes around the blood vessels. Reflectance confocal microscopy (RCM) detection showed focal liquefaction degeneration of basal cells in the lesions, with a significant infiltration of melanocytes and inflammatory cells in the dermal papillae and superficial layers. Conclusion The primary target organ of occupational melanocytes is the skin, and no damage to other organs was identified thus far. Results from skin biopsies and RCM examinations can be used for differential diagnosis.

To expand the single-dose duration over which noninvasive clinical and preclinical cancer imaging can be conducted with high sensitivity, and well-defined spatial and temporal resolutions, a facile strategy to prepare ultrasmall nanoparticulate X-ray contrast media (nano-XRCM) as dual-modality imaging agents for positron emission tomography (PET) and computed tomography (CT) has been established. Synthesized from controlled copolymerization of triiodobenzoyl ethyl acrylate and oligo(ethylene oxide) acrylate monomers, the amphiphilic statistical iodocopolymers (ICPs) could directly dissolve in water to afford thermodynamically stable solutions with high aqueous iodine concentrations (>140 mg iodine/mL water) and comparable viscosities to conventional small molecule XRCM. The formation of ultrasmall iodinated nanoparticles with hydrodynamic diameters of ca. 10 nm in water was confirmed by dynamic and static light scattering techniques. In a breast cancer mouse model, in vivo biodistribution studies revealed that the ⁶⁴Cu-chelator-functionalized iodinated nano-XRCM exhibited extended blood residency and higher tumor accumulation compared to typical small molecule imaging agents. PET/CT imaging of tumor over 3 days showed good correlation between PET and CT signals, while CT imaging allowed continuous observation of tumor retention even after 10 days post-injection, enabling longitudinal monitoring of tumor retention for imaging or potentially therapeutic effect after a single administration of nano-XRCM.

This article provides a comprehensive overview of the concepts and types of comorbidities associated with cardiovascular diseases in the aged, summarizing their impacts on patients and potential intervention measures. The aim is to offer a reference for future research related to comorbidity management in aged cardiovascular disease patients in China.

Background Wearing anti-vibration gloves is a simple and effective way to prevent hand-arm vibration disease. The requirements for vibration damping gloves are varied by types of operations exposed to vibration. Objective To study the vibration attenuation and dexterity of different types of protective gloves, and to provide reference for scientific wearing of vibration damping gloves for people working with vibration exposure. Methods Nine kinds of common protective gloves (A and B were dipping gloves; C, D, and E were rubber gloves; F and G were textile and fabric gloves; H was cotton gloves; I was leather gloves) used by workers exposed to vibration in 28 factories in Guangdong Province were selected as research objects by typical case sampling method, and the basic parameters of included protective gloves were investigated and measured. According to ISO 10819:2013, a glove vibration transmissibility (GVT) test system was used to detect the vibration transmissibility values and analyze vibration attenuation characteristics of the subjects wearing different protective gloves. The dexterity was tested by Minnesota Manual Dexterity Test. Pearson test was used to analyze the correlations among glove thickness, vibration transmissibility, dexterity score, and grip strength score. Results For rubber gloves (C, D, and E), the associated average adjusted vibration transmissibility at middle and low frequencies \begin{document}$ {\overline T _{\text{M}}} $\end{document} and average adjusted vibration transmissibility at high frequency \begin{document}$ {\overline T _{\text{H}}} $\end{document} were lower than those of other gloves (0.89-0.91 and 0.59-0.80 respectively), the vibration transmissibility values of 50-200 Hz frequency band was 0.81-0.97, and the vibration transmissibility values of 315-1250 Hz frequency band decreased with the increase of frequency (the minimum value was 0.13). For other types of gloves (A, B, F, G, H, and I), the \begin{document}$ {\overline T _{\text{M}}} $\end{document} and \begin{document}$ {\overline T _{\text{H}}} $\end{document} were 0.95-0.98 and 1.03-1.11 respectively, the vibration transmissibility values of 50-200 Hz frequency band was 0.96-1.02, and the vibration transmissibility values of 400-1250 Hz frequency band increased (the maximum value was 1.29). The \begin{document}$ {\overline T _{\text{M}}} $\end{document}, \begin{document}$ {\overline T _{\text{H}}} $\end{document}, and vibration transmissibility values of 40-1250 Hz frequency band of rubber gloves with double-layer protective materials (C, D, and E) were significantly lower than those of gloves with single-layer protective materials. But the \begin{document}$ {\overline T _{\text{M}}} $\end{document} and \begin{document}$ {\overline T _{\text{H}}} $\end{document} of gloves of other types with double-layer materials (F, H, and I) were still greater than 0.9 and 1.0 respectively. Compared with single-layer protective materials, the gloves of other types with double-layer materials showed no significant changes in the vibration transmissibility values of 25-200 frequency band (0.91-1.06), and an increase in the vibration transmissibility values of 250-630 Hz frequency band (the maximum value was 1.22). The dexterity scores and grip strength scores of dipping gloves (A and B) were the lowest. Rubber gloves C had the highest dexterity score and grip strength score. The thickness of protective gloves was negatively correlated with the vibration transmissibility values, and positively correlated with the dexterity score and the grip strength score (P < 0.05). The vibration transmissibility value was negatively correlated with the dexterity score and the grip strength score (P < 0.05). Conclusion Among the 9 kinds of gloves, cotton gloves and leather gloves have no damping effect. Rubber gloves have certain vibration reduction effect, and the vibration reduction effect on high frequency band is better than that on low frequency band. The thicker the damping material is, the better the damping effect is, but the less the dexterity is. Appropriate damping gloves should be selected according to actual vibration operations.

Objective To investigate the effect of short-term complications after D2 radical gastrectomy on long-term survival rate of gastric cancer patients. Methods A retrospective case-control study was conducted on 421 patients with gastric cancer who underwent D2 radical gastrectomy. According to the short-term postoperative complications, they were divided into experimental group (complication group, n=76) and control group (without complication group, n=345). In order to reduce the selection bias, the long-term survival rate of the two groups was tested by Kaplan-Meier survival analysis method after balancing the variables by propensity score matching (PSM). Log rank method was used for univariate analysis and Cox multivariate analysis was used for prognostic factors. Results There was no significant difference in long-term survival rate between the experimental group and the control group (P > 0.05). Histological type, lymph node metastasis rate and pTNM stage were independent risk factors for long-term survival. Conclusion The short-term complications after D2 radical gastrectomy have no significant impact on the long-term survival rate of gastric cancer patients, but it has certain clinical significance to actively prevent and control complications.