Objective To longitudinally investigate the characteristics of postoperative weight changes in patients with esophageal cancer and analyze its influencing factors, which can provide certain guidance for nutritional intervention in patients with esophageal cancer. Methods Patients with esophageal cancer who underwent surgical treatment at the Sichuan Cancer Hospital from December 2020 to February 2022 were prospectively included. The general information questionnaire and body composition analyzer were used to longitudinally investigate the patients’ weight and body composition before surgery (T0), 1 month after surgery (T1), 3 months after surgery (T2) and 6 months after surgery (T3), and the change characteristics were analyzed. The generalized estimating equation was used to analyze the influencing factors for postoperative weight changes in patients with esophageal cancer. Results A total of 130 patients were enrolled, including 110 males and 20 females, aged 42-79 (63.33±8.16) years. The weight and body composition of patients with esophageal cancer showed a continuous slow downward trend within 6 months after surgery. The weight loss rate of patients at 1, 3, and 6 months after surgery was 5.10%, 7.76%, and 9.86%, respectively. The analysis results of the influencing factors for postoperative weight showed that patients with the following characteristics had more weight loss: female (β=−7.703, P=0.001), ≥60 years (β=−3.657, P=0.010), smoking (β=4.622, P=0.010), low tumor differentiation degree (β=4.314, P=0.039), and high frequency of eating (β=−3.400, P=0.008). Conclusion Weight loss is an important health problem for patients with esophageal cancer after surgery, and patients have a continuous downward trend in weight within 6 months after surgery. Medical staff should pay special attention to the patients who are female, ≥60 years, having smoking history and low tumor differentiation degree.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective To establishing a chromatographic analysis method for therapeutic drug monitoring of fruquintinib by high-performance liquid chromatography （HPLC）. Methods The analysis was conducted using a Welch Ultimate XB-C₁₈ （4.6 mm×150 mm, 5 μm） column with the column temperature at 35℃. The flow rate was 1.0 ml/min and the detection wavelength was at 240 nm. The mobile phase consisted of acetonitrile and 10 mmol/L potassium dihydrogen phosphate （pH 3.15）= 40∶60（V∶V）. The internal standard substance was Apatinib．All plasma samples were extracted with ethyl acetate solution. Results The linearity of Fruquintinib in plasma was good within the range of 15.63-500.00 ng/ml （r=0.999 9）. The recoveries of the method were between 95%-110% with the RSD less than 10%. The extraction rates of the method were all higher than 97%. The stability tests met the relative requirements. Conclusion A HPLC method for the determination of Fruquintinib in human plasma was established. The method had good specialty, and could be used to detect the blood concentrations of Fruquintinib in clinical practice to improve the individualized medication．

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective:To evaluate the diagnostic performance of the 0-2 h high-sensitivity cardiac troponin T (hs-cTnT) cutoff recommended by the guidelines for the rule-out and rule-in diagnosis of suspected non-ST-segment elevation myocardial infarction (NSTEMI) patients of different age groups.Methods:This is a retrospective cohort study. Clinical data of 4 050 suspected NSTEMI patients who visited the Chest Pain Center of Zhongshan Hospital affiliated with Fudan University from January 2020 to December 2021 were retrospectively analyzed. Patients who visited from January 2020 to April 2021 (2 650 patients) were included as derivation cohort, and those who visited from May to December 2021 (1 400 patients) were included as validation cohort. The diagnostic performance of the guideline-recommended hs-cTnT 0-2 h cutoff for the rule-out and rule-in of NSTEMI diagnosis was compared among subgroups of patients aged ≤60, >60-70, and >70 years in the derivation group. Rule-out sensitivity, negative predictive value, and rule-out proportion, rule-in specificity, positive predictive value, and rule-in proportion were assessed. Cutoffs were established for subgroups with relatively lower diagnostic performance and validated in the validation group. Major adverse cardiovascular events (MACE) within 30 days after patient visit were used as the outcome, and survival curves were plotted using Kaplan-Meier curves, log-rank tests were used to analyze the incidence of MACE.Results:The sensitivity for ruled-out NSTEMI using the guideline-recommended 0-2 h cutoff in the subgroups of patients aged ≤60, >60-70, and >70 years in the derivation group was 100%; the negative predictive value was 100%; the ruled-out rates were 47.6% (331/696), 45.9% (491/1 070), and 28.5% (252/884), respectively. The specificity for ruled-in NSTEMI was 88.3%, 90.9%, and 86.4%, respectively; the positive predictive values were 55.3%, 59.3%, and 58.2%, respectively; the ruled-in rates were 22.6% (157/696), 19.5% (209/1 070), and 27.0% (239/884), respectively. With a requirement of sensitivity and negative predictive value >99%, the ruled-out cutoff for the subgroup of patients aged >70 years in the derivation group was established as 0 h hs-cTnT <6 ng/L or 0 h hs-cTnT<22 ng/L and 0-2 h Δhs-cTnT <5 ng/L, which increased the ruled-out rate of the subgroup aged >70 years to 45.6% (403/884). In the validation group, 42.2% (196/465) patients could be ruled-out. The incidence of MACE within 30 days for ruled-out patients aged >70 years using the established cutoff was 0.Conclusion:The diagnostic performance for the ruled-out and ruled-in diagnosis using the guideline-recommended 0-2 h hs-cTnT cutoff are relatively consistent across different age groups, but the ruled-out rate for patients aged >70 years is lower than for those aged ≤60 and >60-70 years. The ruled-out cutoff established in this study can be used to improve diagnostic performance of thus indicator on suspected NSTEMI patients.

Objective To investigate the mechanism of Astragali Complanati Semen in the prevention and treatment of hyperlipidemia;To provide theoretical basis for its clinical application.Methods The active components of Astragali Complanati Semen were retrieved and screened through TCMSP,TCMID and TDT databases to obtain the action targets of the active components.Hyperlipidemia targets were obtained through GeneCards,DisGeNET,and TTD databases,and the drug active component targets were intersected with hyperlipidemia targets.Cytoscape 3.9.1 software and STRING database were used to construct active component-target network and protein-protein interaction network,screening for major active components and core targets.GO and KEGG pathway enrichment analysis was performed using the DAVID database,and the CB-Dock platform was used for molecular docking.HepG2 cells were induced to construct a high-fat cell model using oleic acid and palmitic acid,and intervened with Astragali Complanati Semen freeze-dried powder solution.The mRNA expression of the core target was detected by RT-qPCR.Results A total of 10 active components of Astragali Complanati Semen and 67 potential action targets of hyperlipidemia were identified,involving signaling pathways such as AGE-RAGE,lipid metabolism,HIF-1,etc.Experimental results showed that intervention with Astragali Complanati Semen could reduce lipid accumulation in the high-lipid cell model,with an optimal intervention concentration of 500 μg/mL;RT-qPCR revealed significant down-regulation of TNFα,IL6,AKT1,PPARG,and other genes after intervention with Astragali Complanati Semen.Conclusion Astragali Complanati Semen exerts lipid-regulating effects through multiple targets and pathways,providing a basis for its application in the prevention and treatment of hyperlipidemia.

Objective To systematic analyze the risk factors for new-onset urethral stricture after transurethral holmium laser enucleation of the prostate(HoLEP)in the treatment of benign prostatic hyperplasia(BPH).Methods A case-control study was conducted on 746 BPH patients undergoing HoLEP treatment in Department of Urology of the Third Medical Center of Chinese PLA General Hospital from November 2021 to August 2024.After 23 cases were excluded because of complication of prostate cancer,finally 723 patients were included.General clinical data such as age,height,weight,history of smoking and drinking,perioperative parameters,and follow-up data at 1,3 and 6 months after operation were collected.Univariate and multivariate logistic regression analyses were used to identify the clinical risk factors for new-onset urethral stricture after HoLEP.Results The subjected patients had a median age of 66.5(64.0,75.0)years,and a preoperative median prostate volume of 66(45,92)mL,and a median indwelling catheter time of 4(4,5)d.The incidence of new urethral stricture after operation was 5.8%(42/723),with membranous part of the urethra(61.9%)the most common site,followed by the external urethral orifice(21.4%)and the bladder neck(7.1%).Risk factor analysis indicated that low BMI(<18.5 kg/m2)(OR=4.682,P=0.037),young age(OR=0.946,P=0.005),and postoperative urinary tract infection(OR=4.513,P=0.001)were independent risk factors for new-onset urethral stricture after surgery.Prostate volume and indwelling time of urinary catheter had no significant association with the occurrence of new urethral stricture after surgery.Conclusion The occurrence of new-onset urethral stricture after HoLEP is significantly correlated with BMI,age and urinary tract infection.The above 3 factors can be used as better predictors of new-onset urethral stricture after HoLEP.