Background As one of the primary operational methods in the power grid industry, the insulated glove working method imposes significant physical demands due to the constraints of insulating equipment and specific required postures, resulting in substantial occupational health hazards among workers in this sector, which have garnered widespread social attention. Objective To investigate the prevalence and influencing factors of work-related musculoskeletal disorders (WMSDs) in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to provide targeted measures to reduce occupational hazards. Methods Using stratified cluster sampling, 1079 frontline workers were randomly selected from power supply enterprises across 3 provinces in China. The revised Chinese version of the Musculoskeletal Disorders Questionnaire was used to investigate the 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to collect factors associated with multi-site WMSDs (defined as involvement of ≥2 sites among the neck, shoulder, and lumbar). Results The 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions was 39.9%, 30.0%, and 25.3%, respectively, with a multi-site WMSDs prevalence of 32.0%. Multiple logistic regression analysis showed that, compared to workers with technical secondary school education or senior high school education and below, workers with junior college education or bachelor’s degrees and above had a higher risk of multi-site WMSDs (OR=2.12, 95%CI: 1.47, 3.06). Compared to workers with <10 years of work experience, those with 10-<20 years of work experience had a higher risk of multi-site WMSDs (OR=1.96, 95%CI: 1.45, 2.67). Working in uncomfortable postures "sometimes" (OR=1.64, 95%CI: 1.14, 2.36), "frequently" (OR=2.75, 95%CI: 1.76, 4.29), and "very frequently" (OR=3.55, 95%CI: 2.04, 6.19) were significantly associated with an increased risk of multi-site WMSDs compared to never working in such postures. Frequent repetitive movements of the low back (OR=2.05, 95%CI: 1.48, 2.84) increased the risk of multi-site WMSDs, while sufficient rest time decreased the risk (OR=0.45, 95%CI: 0.34, 0.61). Conclusion The prevalences of single-site and multi-site WMSDs in the neck, shoulder, lumbar regions are relatively high among workers wearing insulated gloves. Factors associated with multi-site WMSDs include 10-<20 years of work experience, junior college education or bachelor’s degrees and above, uncomfortable working postures, frequent repetitive low-back movements, and lack of sufficient rest time.

Background As a traditional labor-intensive industry, the wooden furniture manufacturing sector has been facing significant occupational health hazards, notably noise exposure. Objective To understand the current status of occupational health management and workplace noise monitoring in the wooden furniture manufacturing industry in Foshan City of Guangzhou Province over the past five years (2020−2024), to clarify the exposure level of occupational noise hazards in this industry, the implementation of prevention and control measures, and their dynamic changing trends, and to provid a reference basis for formulating and optimizing targeted occupational health supervision strategies. Methods By judgment sampling method, 381 wooden furniture manufacturing enterprises in Foshan City from 2020 to 2024 were selected. Through document review, on-site investigation, and on-site testing, the basic information of the enterprise, key indicators of occupational health management (declaration of projects with occupational disease hazards, occupational health training, the setting and effect of occupational disease prevention facilities, the allocation and use of personal protective equipment, occupational health examinations, etc.) and monitoring data of noise intensity in the workplace were systematically collected. Descriptive statistical analysis was adopted to present the characteristics of enterprises and various indicators, and trend tests were used for dynamic changes of occupational health management indicators and noise intensity monitoring results between each year. Results Among the 381 enterprises, small and micro enterprises accounted for 94.0% (358/381), the overall occupational hazard exposure rate of workers was 56.7% (15199/26798), and the noise exposure rate was 45.6% (12221/26798). The report rate of projects with occupational disease hazards was 100%, the occupational health training rate of exposed workers was 69.6%, the setting rate and effectiveness rate of noise prevention facilities were 24.9% and 95.8% respectively, the distribution rate and effective wearing rate of noise protection earplugs/earmuffs were 77.6% and 87.1% respectively, and the rate of occupational health examinations for noise-exposed workers and the abnormal rate were 55.4% and 2.5% respectively. The trend analysis results showed that the rates of occupational health training, setting and effectiveness of noise prevention facilities, distribution and effective wearing of noise protection earplugs/earmuffs, occupational health examinations for noise-exposed workers, and abnormal health examination results all showed an overall upward trend (P values were all<0.05). The proportion of workplace noise intensity greater than 85 dB(A) and the rate of noise exceeding standards at work positions both showed an overall upward trend (P values were both<0.01). Conclusion During the period from 2020 to 2024, the occupational health management in the wooden furniture manufacturing industry in Foshan City has achieved certain positive progress, particularly in areas such as the installation of protective facilities, the use of personal protective equipment, and the implementation of occupational health examinations. However, workplace noise hazards have not been effectively controlled. Moving forward, regulatory efforts must consolidate existing management achievements while strengthening mandatory requirements and support for the technical transformation of high-noise processes and the widespread adoption of noise reduction facilities. This approach is essential to fundamentally curb occupational noise hazards.

Background As one of the primary operational methods in the power grid industry, the insulated glove working method imposes significant physical demands due to the constraints of insulating equipment and specific required postures, resulting in substantial occupational health hazards among workers in this sector, which have garnered widespread social attention. Objective To investigate the prevalence and influencing factors of work-related musculoskeletal disorders (WMSDs) in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to provide targeted measures to reduce occupational hazards. Methods Using stratified cluster sampling, 1079 frontline workers were randomly selected from power supply enterprises across 3 provinces in China. The revised Chinese version of the Musculoskeletal Disorders Questionnaire was used to investigate the 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to collect factors associated with multi-site WMSDs (defined as involvement of ≥2 sites among the neck, shoulder, and lumbar). Results The 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions was 39.9%, 30.0%, and 25.3%, respectively, with a multi-site WMSDs prevalence of 32.0%. Multiple logistic regression analysis showed that, compared to workers with technical secondary school education or senior high school education and below, workers with junior college education or bachelor’s degrees and above had a higher risk of multi-site WMSDs (OR=2.12, 95%CI: 1.47, 3.06). Compared to workers with <10 years of work experience, those with 10-<20 years of work experience had a higher risk of multi-site WMSDs (OR=1.96, 95%CI: 1.45, 2.67). Working in uncomfortable postures "sometimes" (OR=1.64, 95%CI: 1.14, 2.36), "frequently" (OR=2.75, 95%CI: 1.76, 4.29), and "very frequently" (OR=3.55, 95%CI: 2.04, 6.19) were significantly associated with an increased risk of multi-site WMSDs compared to never working in such postures. Frequent repetitive movements of the low back (OR=2.05, 95%CI: 1.48, 2.84) increased the risk of multi-site WMSDs, while sufficient rest time decreased the risk (OR=0.45, 95%CI: 0.34, 0.61). Conclusion The prevalences of single-site and multi-site WMSDs in the neck, shoulder, lumbar regions are relatively high among workers wearing insulated gloves. Factors associated with multi-site WMSDs include 10-<20 years of work experience, junior college education or bachelor’s degrees and above, uncomfortable working postures, frequent repetitive low-back movements, and lack of sufficient rest time.

Objective To analyze the emergency testing results of a mixed poisoning incident involving methyl acetate and dimethyl carbonate in a composite fabric processing enterprise. Methods A mixed poisoning incident involving methyl acetate and dimethyl carbonate occurred at a composite fabric processing enterprise in a city of Guangdong Province. On-site occupational health investigation data and laboratory testing results related to this incident were collected, and an integrated analysis was conducted. Results The on-site occupational health investigation revealed inadequate ventilation and non-standard use of personal protective equipment. Volatile organic component analysis of raw and auxiliary materials showed that methyl acetate and dimethyl carbonate had relatively high percentages of peak area among all used volatile organic chemical agents in post-incident emergency testing, accounting for 65.10% and 38.25%, respectively. The exposure concentration of short term (C_STE) of methyl acetate in the production line air was 15.13 mg/m³. In the chemical storage area, C_STE of methyl acetate and methanol were 451.04 and <0.21 mg/m³, respectively, all below their respective occupational exposure limits (500.00 and 50.00 mg/m³). In the poisoned workers, blood methanol, blood formic acid, and urinary formic acid levels were 147, 414, and 4 389 mg/L, respectively. Conclusion Occupational exposure to methyl acetate and dimethyl carbonate may lead to acute occupational poisoning and cause health damage. Employers should fulfill their responsibilities for occupational disease prevention by ensuring proper operation of protective facilities, while workers should enhance awareness of occupational disease prevention and correctly use personal protective equipment.

Background A large number of power supply workers are involved in live working and are exposed to multiple risk factors for long periods of time during outdoor work, which in turn causes occupational health problems. Objective To identify potential ergonomic factors related to work-related musculoskeletal disorders (WMSDs) and estimate the ergonomic risk of electricians. Methods A total of 31 workers were randomly selected from a training base under a power supply enterprise in Guangxi, and their operation processes were recorded by video. Using the Rapid Upper Limb Assessment (RULA) method, the workers were scored by the posture of their arms, neck, and torso during operation, and the final scores were summarized to assess their risk level. Two independent samples t-tests were used to compare the differences in RULA scores. Results A total of 31 videos for mounting/dismounting insulation mask and 29 videos for breaking/connecting contact terminal were collected. The RULA score for mounting/dismounting insulation mask was 6.6 ± 0.7 (left side) and 7.0 ± 0.2 (right side), most of the workers had a score of 7 (71.0% on the left side and 96.8% on the right side), and the upper limb and overall scores on the right side were higher than those on the left side (P < 0.05). The RULA score for breaking/connecting contact terminal was 6.9 ± 0.4 (both right and left sides), most of workers had a score of 7 (89.7% on the left side and 93.1% on the right side), and the difference of the overall scores between the right and left side for this operation were not statistically significant (P > 0.05). The ergonomic risk levels for both operations were level 3 or higher. Conclusion Mounting/dismounting insulation mask and breaking/connecting contact terminal are typical upper limb operations, and have a high level of ergonomics risk, requiring effective preventive and protective measures.

Objective To analyze the distribution of occupational hazard factors (OHFs) in key enterprises in Foshan City. Methods A total of 373 enterprises from 11 key industries in Foshan City in 2022 were selected as the research subjects using the purposive sampling method. Monitoring data of OHFs in workplaces were obtained and analyzed from the "Workplace Occupational Hazards Monitoring Information System" under "China Disease Prevention and Control Information System". Results Among the 373 enterprises, small and micro-sized enterprises, and large and medium-sized enterprises accounted for 85.5% and 14.5% respectively. A total of 24 137 sampling points in the workplaces were monitored for OHFs, with the national standard compliance rate of 92.1%. Among different OHFs, the compliance rates ranked from highest to lowest were chemical agents, dust, and noise (98.0% vs 89.3% vs 52.0%, P<0.01). A total of 63 131 workers were employed in 373 enterprises, among whom 29 753 were exposed to OHFs, yielding an overall exposure rate of 47.1%. Exposure rates of OHFs by enterprise scale, from highest to lowest, were micro-sized, small-sized, medium-sized, and large-sized enterprises (69.2% vs 52.7% vs 47.3% vs 39.0%, P<0.01). The proportion of workers participated in occupational medical examination was 85.1%, with re-examination proportion of 62.5% and the abnormality detection rate of 2.1%. Conclusion In key enterprises in Foshan City, the risk of noise exposure is relatively high, and the exposure rate of OHFs is highest in micro-sized enterprises. The occupational health supervision and management department needs to strengthen the governance of noise hazards in a targeted manner and urge enterprises (especially micro-sized enterprises) to fulfill their primary responsibilities in occupational disease prevention and control.

Animal surgery courses are a critical component of medical training;however,teaching practices have demonstrated problems,such as the difficulty of interdisciplinary teaching,students' weak concepts of sterility,poor clinical thinking,insufficient teamwork,shallow emotional investment,and ineffective value guidance.By integrating the characteristics of student learning and utilizing virtual simulation experiments alongside peer role models,an emotional-guidance teaching model has been established to enhance the effectiveness of"life education",through strengthened emotional identification and improved value guidance.The result indicate that this teaching model forms a closed-loop teaching process,aligns with students' cognitive patterns and cultivates their comprehensive abilities,and enhances teaching effectiveness.

Objective To establish the fingerprint of Xuemai Shutong granules by UPLC-ELSD and determine the contents of 9 components in the preparation simultaneously.Methods The UPLC-ELSD was used to establish the fingerprint of Xuemai Shutong granules,and determine the content of its 9 components.The similarity evaluation system,systematic,cluster analysis,principal component analysis and orthogonal partial least squares discriminant analysis were used to evaluate the quality of different batches of preparation.Results The similarity degrees of UPLC-ELSD fingerprints of 11 batches of Xuemai Shutong granules were from 0.929 to 0.978,17 common peaks were calibrated,of which 11 peaks were identified:peak 3(notoginsenoside R1),peak 4[ginsenoside Rg,(Re)],peak 5(notoginsenoside R2),peak 6(ginsenoside Rb,),peak 9(astragaloside Ⅳ),peak 10(ginsenoside Rk3),peak 11(ginsenoside Rh4),peak 12[20(S)-ginsenoside Rg3],peak 13[20(R)-ginsenoside Rg3],peak 14(ginsenoside Rk1),peak 15(ginsenoside Rg5).The stoichiometric analysis divided 11 batches of samples into 2 classes,and the 2 principal components in PCA analysis reflected the information of 17common peaks,10 peaks which affected the quality difference are screened out.The linear relationship of the 9 components was good in their respective quality ranges in the content analysis(r＞0.999 2),the average recovery rate were between 95.02％-97.78％and the RSD were 0.69％-1.70％(n=6).The contents of notoginsenoside R1,notoginsenoside R2,ginsenoside Rb1,astragaloside Ⅳ,ginsenoside Rh4,20(S)-ginsenoside Rg3,20(R)-ginsenoside Rg3,ginsenoside Rk1 ginsenoside Rg5 in the 11 batches of Xuemai Shutong granules were 0.087 5-0.187 6,0.494 3-0.688 6,0.448 1-0.705 5,0.192 2-0.270 8,1.492 5-2.077 6,0.316 0-0.463 8,0.254 5-0.382 0,0.117 6-0.163 9,3.407 7-4.706 4 mg·g-1,respectively.Conclusions The established fingerprint and content determination method was accurate and reliable,which can improve the quality standard of Xuemai Shutong granules,and provide reference for its overall quality evaluation.

Animal surgery courses are a critical component of medical training;however,teaching practices have demonstrated problems,such as the difficulty of interdisciplinary teaching,students' weak concepts of sterility,poor clinical thinking,insufficient teamwork,shallow emotional investment,and ineffective value guidance.By integrating the characteristics of student learning and utilizing virtual simulation experiments alongside peer role models,an emotional-guidance teaching model has been established to enhance the effectiveness of"life education",through strengthened emotional identification and improved value guidance.The result indicate that this teaching model forms a closed-loop teaching process,aligns with students' cognitive patterns and cultivates their comprehensive abilities,and enhances teaching effectiveness.

Objective To establish the fingerprint of Xuemai Shutong granules by UPLC-ELSD and determine the contents of 9 components in the preparation simultaneously.Methods The UPLC-ELSD was used to establish the fingerprint of Xuemai Shutong granules,and determine the content of its 9 components.The similarity evaluation system,systematic,cluster analysis,principal component analysis and orthogonal partial least squares discriminant analysis were used to evaluate the quality of different batches of preparation.Results The similarity degrees of UPLC-ELSD fingerprints of 11 batches of Xuemai Shutong granules were from 0.929 to 0.978,17 common peaks were calibrated,of which 11 peaks were identified:peak 3(notoginsenoside R1),peak 4[ginsenoside Rg,(Re)],peak 5(notoginsenoside R2),peak 6(ginsenoside Rb,),peak 9(astragaloside Ⅳ),peak 10(ginsenoside Rk3),peak 11(ginsenoside Rh4),peak 12[20(S)-ginsenoside Rg3],peak 13[20(R)-ginsenoside Rg3],peak 14(ginsenoside Rk1),peak 15(ginsenoside Rg5).The stoichiometric analysis divided 11 batches of samples into 2 classes,and the 2 principal components in PCA analysis reflected the information of 17common peaks,10 peaks which affected the quality difference are screened out.The linear relationship of the 9 components was good in their respective quality ranges in the content analysis(r＞0.999 2),the average recovery rate were between 95.02％-97.78％and the RSD were 0.69％-1.70％(n=6).The contents of notoginsenoside R1,notoginsenoside R2,ginsenoside Rb1,astragaloside Ⅳ,ginsenoside Rh4,20(S)-ginsenoside Rg3,20(R)-ginsenoside Rg3,ginsenoside Rk1 ginsenoside Rg5 in the 11 batches of Xuemai Shutong granules were 0.087 5-0.187 6,0.494 3-0.688 6,0.448 1-0.705 5,0.192 2-0.270 8,1.492 5-2.077 6,0.316 0-0.463 8,0.254 5-0.382 0,0.117 6-0.163 9,3.407 7-4.706 4 mg·g-1,respectively.Conclusions The established fingerprint and content determination method was accurate and reliable,which can improve the quality standard of Xuemai Shutong granules,and provide reference for its overall quality evaluation.