To report diagnosis and treatment of a patient with rectal cancer and synchronous liver metastases, accompanied by severe coronary artery stenosis and cardiac insufficiency, and to provide a reference for clinical decision-making in such cases through introducing the treatment contradiction, the choice of systemic treatment plan and the timing of operation, and the final outcome. After definitive diagnosis, the patient received systemic therapy with cetuximab＋irinotecan＋oxaliplatin＋raltitrexed, and along with oral medication to improve cardiac function, followed by elective coronary revascularization. After revascularization, the cardiac function of patient was fully improved. And the tumor lesion was effectively controlled after antitumor therapy. Once the cardiac condition of patient stabilized, two-stage surgical resection of the primary rectal cancer and liver metastases was performed, ultimately achieving tumor-free status, and discharged.

OBJECTIVE To ensure the safety of patients’ drug use and control the risk of medical insurance expenditure by upgrading the pre-prescription review system to conduct pre-review on prescriptions from internet hospitals and external prescriptions， as well as to review the payment methods of drugs （including in-hospital and external drug dispensing）. METHODS The data interfaces of prescriptions from internet hospitals and external prescriptions were integrated to achieve real-time rational drug use intervention. Additionally， an intelligent review project for payment method was added to precisely intervene in the medical insurance payment methods of drugs. The effect of the system upgrade was evaluated by comparing the qualification rates of prescriptions from internet hospitals and external prescriptions and the suspected amounts of drug violations from January to April 2025 （before the system upgrade） and May to August 2025 （after the system upgrade）. RESULTS After the upgrade of the pre-prescription review system， the qualification rates of prescriptions from internet hospitals and external prescriptions increased by 3.5% [95% confidence interval （CI）＝0.3%-6.7%， P ＝0.037 ] ； the suspected amounts of drug violations decreased to 52.9% of the pre-upgrade level （95%CI＝31.6%-88.5%， P ＝0.026）， and the average monthly sequential decrease was 29.5% （95%CI＝12.2%-43.4%， P ＝0.012）. Moreover， the addition of the intelligent review project for payment methods promoted the management of off-label drug use in our hospital. After the upgrade， a total of 79 filling valid applications for off-label drug use were received and archived. CONCLUSIONS The upgrade of the pre-prescription review system effectively improves the review qualification rates of prescriptions from internet hospitals and external prescriptions and the accuracy of medical insurance payment for drugs， and strengthens the supervision of off-label drug use， achieving dual guarantees of clinical rationality and medical insurance compliance.

OBJECTIVE To prepare an intelligent responsive liposome-hydrogel nanopreparation co-loaded with gambogic acid （GA）， and characterize its antitumor activity in vitro . METHODS GA-ICG-Lip-gel was prepared by ethanol injection and cold dissolution， incorporating GA and the photosensitizer indocyanine green （ICG）. The appearance and microscopic morphology of GA-ICG-Lip-gel were observed， its encapsulation efficiency and drug loading capacity were measured， and its photothermal conversion performance， photothermal stability， and infrared imaging properties were investigated， along with the determination of its in vitro release profile. Human breast cancer MCF-7 cells were used as objects to investigate the effects of GA-ICG-Lip-gel （or with near-infrared light irradiation） on cell viability， migration ability， and the cellular uptake capacity of GA-ICG-Lip-gel. RESULTS GA-ICG-Lip-gel existed in a solution state at room temperature and transformed into a gel state at 37 ℃. Its microstructure was dense with small pores， and its encapsulation efficiency and drug loading were （96.07±0.86） % and （6.28±1.16） %， respectively. After exposure to near-infrared light， the temperature of GA-ICG-Lip-gel rose above 42 ℃， with no significant attenuation observed in the heating curve. The heating efficiency was dependent on both the irradiation time and drug concentration. Compared to media without gelatinase， the cumulative release rate of GA-ICG-Lip-gel increased in media containing gelatinase. In vitro studies showed that GA-ICG-Lip-gel could be efficiently taken up by MCF-7 cells； GA-ICG-Lip-gel significantly inhibited the viability and migration ability of MCF-7 cells （ P ＜0.05）， and this inhibitory effect was further enhanced under near-infrared light irradiation. CONCLUSIONS This study successfully prepares GA-ICG-Lip-gel， which exhibits favorable photothermal conversion properties and temperature/enzyme dual-responsive drug release characteristics， and demonstrates significant inhibitory effects on the proliferation and migration of breast cancer cells.

The onset and progression of chronic heart failure （CHF） are closely associated with myocardial energy metabolism disorders， and this pathological process significantly affects patient prognosis. Traditional Chinese medicine （TCM）， grounded in time-based medical theories such as the correspondence between humans and nature and the theory of circadian flow of meridians （Ziwu Liuzhu）， exhibits intrinsic consistency with modern circadian rhythm theory， providing a unique theoretical framework for understanding and intervening in CHF from a temporal perspective. This article systematically explores the impact of circadian rhythms on energy metabolism and the potential mechanisms by which TCM active ingredients intervene in CHF through a review of relevant literature. It is found that various TCM active ingredients， including flavonoids （such as nobiletin）， alkaloids （such as berberine）， and polyphenols （such as resveratrol）， can improve mitochondrial function， promote fatty acid oxidation， enhance glucose uptake and utilization efficiency， maintain metabolic balance， and alleviate oxidative stress and inflammatory responses in myocardial cells by regulating the expression and rhythms of core circadian clock genes such as CLOCK， BMAL1， PER， and CRY. These actions thereby correct energy metabolism disorders and improve cardiac function. Further exploration of the interaction mechanisms between these components and the circadian rhythms holds promise for providing novel theoretical foundations and potential intervention strategies for the prevention and treatment of CHF.

ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

ObjectiveBased on the traditional quality evaluation methods summarized in previous dynasties， this paper systematically contrasted the quality differences between wild Polygalae Radix（WPR） and cultivated Polygalae Radix（CPR） from the aspects of character， microscope and chemical composition by modern scientific and technological means， providing a basis for high-quality production and quality control. MethodsCPR and local WPR in Yulin city， Shaanxi province from 1 to 6 years were collected， and a systematic comparative analysis was conducted using traditional pharmacognosy research methods combined with modern multi-omics analysis techniques， including character traits（length， weight， diameter）， cross-sectional microscopic features（proportions of cork， phloem， xylem， etc）， cell wall component content（hemicellulose， cellulose， lignin）， extracts content（water-soluble extract and alcohol-soluble extract）， carbohydrate content（starch， water-soluble polysaccharides）， contents of total flavonoids， total saponins and specific marker compounds（3，6′-disinapoyl sucrose， polygalaxanthone Ⅲ， tenuifoliside A， tenuifoliside C， sibiricose A₅ and A₆） and other indexes. Ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was employed to conduct comparative analysis of secondary metabolites in WPR and CPR， and multivariate statistical analysis such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were combined to screen the key differential components of them. ResultsIn terms of appearance， there were significant differences between WPR and CPR. The characteristics of WPR conformed to the "thick wrinkles on the epidermis" recorded in ancient books， featuring a wrinkled surface and grayish-brown appearance. However， CPR had a finer texture and a yellowish white appearance， with weight， length， and diameter increasing with longer cultivation periods. In terms of microscopy， WPR exhibited a thick cork layer with fissures in the phloem， whereas CPR had a thinner cork layer with uniformly arranged cork cells. Younger PR specimens showed numerous phloem fissures in cross-sections， while older specimens display progressively denser arrangements of phloem parenchyma cells. In terms of the contents of various major components， the contents of water-soluble extract， starch and total saponins in WPR were inversely proportional to the root diameter， while the contents of water-soluble extract， water-soluble polysaccharides and total saponins in CPR decreased with the increase of planting years. The content of xanthones in WPR was significantly higher than that of CPR， while the contents of other major components showed no significant change pattern. Among the six indicator components， the average content of sibiricose A₅ in WPR was significantly higher than that of CPR， followed by slightly higher content of tenuifoliside A. In CPR， the relative content of 3，6′-disinapoyl sucrose and tenuifoliside A was the highest. The former showed an increase in volatility with increasing cultivation years， while the latter showed a decrease in volatility. The results of differential compound analysis based on UPLC-Q-TOF-MS showed that there were significant differences in metabolites between WPR and CPR samples. Among them， the seven compounds with the largest differences among WPR samples of different thicknesses were polygalasaponins， and for CPR with different planting years， the main differential compounds were oligosaccharide esters. ConclusionThere are differences between WPR and CPR in character， microscopic structure and chemical composition， and some components are inversely proportional with the increase of diameter and cultivation duration due to the distribution characteristics. However， the longer the cultivation years of PR， the closer it is to the "thick wrinkles on the epidermis" of WPR， which has been respected by generations. It is suggested that this traditional character combined with modern component contents should be used as the index of artificial cultivation and quality control of PR.

Objective: To assess the causal association between specific oral microbiota and the risk of oral leukoplakia (OLK) using a Mendelian randomization (MR) approach, and to elucidate the potential mediating role of immune cells. Methods: Summary statistics from genome-wide association studies (GWAS) of the oral microbiome, GWAS data for immune cell phenotypes, and GWAS summary statistics for OLK from FinnGen were used. The inverse variance weighted (IVW) method was adopted as the primary approach, and it was supplemented by MR Egger regression, simple mode, weighted median, and weighted mode methods for additional analyses, to investigate the causal relationship between 3 117 types of tongue coating and salivary microbiota, as well as 731 immune cell traits, and OLK. Furthermore, a two-step MR approach was applied to explore the potential mediating role of immune cells in the association between oral microbiota and OLK. Results: IVW analysis revealed causal associations between 15 oral microbial genera and OLK. Among these, Streptococcus, Neisseria, and Catonella were associated with a reduced risk of OLK, with Fusobacterium showing the most significant protective effect (OR = 0.41, P = 0.023). In contrast, genera, including Microbacterium, Campylobacter, and Haemophilus_A, were linked to an increased risk of OLK, with Lancefieldella exhibiting the strongest risk effect (OR = 2.66, P = 0.006). Eleven immune cell phenotypes with potential causal associations with OLK were identified, including four protective and seven risk-increasing factors. Mediation analysis further identified four key mediating pathways: pathogenic genera, particularly Campylobacter_A and Lancefieldella, may promote the development and progression of OLK by upregulating highly activated pro-inflammatory immune subsets such as activated monocytes, B cells, and myeloid cells. Conversely, the potentially protective genus Catonella appeared to exert inhibitory effects on OLK by significantly downregulating dendritic cell subsets. Conclusion This study is the first to reveal, at the genetic level, causal pathways through which specific oral microbial genera influence the risk of OLK by mediating immune cell responses. These findings provide novel insights into the immunopathological mechanisms underlying OLK and offer potential targets for intervention strategies aimed at modulating specific microbial genera or immune cell subsets.

Metabolic dysfunction-associated steatotic liver disease (MASLD) has become the most prevalent chronic liver disease worldwide, affecting approximately 32%-38% of the adult population and posing a growing public health burden. MASLD represents a continuous disease spectrum ranging from simple steatosis to metabolic dysfunction-associated steatohepatitis (MASH), progressive hepatic fibrosis, cirrhosis, and ultimately hepatocellular carcinoma (HCC). The pathological core of MASLD lies in disruption of hepatic lipid metabolic homeostasis, characterized by an imbalance among de novo lipogenesis, fatty acid β-oxidation, and very-low-density lipoprotein (VLDL)-mediated lipid export. This metabolic disequilibrium subsequently drives inflammatory injury and fibrotic progression. Among the multiple regulatory pathways involved, thyroid hormone (TH) signaling has emerged as a central regulator of hepatic metabolic homeostasis. The liver is a major peripheral target organ of TH action, where TH predominantly exerts its metabolic effects through thyroid hormone receptor β (TRβ). Large-scale epidemiological studies and meta-analyses have demonstrated that hypothyroidism is significantly associated with increased MASLD prevalence, more severe histological injury, and advanced hepatic fibrosis, suggesting that dysregulation of TH signaling may participate throughout the entire MASLD disease spectrum. At the molecular level, TH regulates hepatic lipid metabolism by coordinating suppression of lipogenesis, enhancement of mitochondrial fatty acid oxidation, and promotion of VLDL assembly and secretion through integrated genomic actions of the T3-TRβ axis and non-genomic signaling pathways. Across different stages of MASLD, TH signaling exerts stage-dependent protective effects. In the steatosis stage, TH improves metabolic flexibility by modulating insulin sensitivity, glucose metabolism, and lipid droplet clearance, thereby alleviating early lipotoxic stress. During progression to MASH, TH attenuates inflammatory amplification by improving mitochondrial homeostasis, suppressing activation of the NOD-like receptor family pyrin domain containing 3 (NLRP3) inflammasome, and modulating the gut-liver axis microenvironment. In advanced stages, TH signaling influences hepatic stellate cell activation and extracellular matrix deposition, partly through interaction with the transforming growth factor-β (TGF-β)/SMAD pathway, while alterations in intrahepatic TH availability, mediated by dynamic changes in iodothyronine deiodinase 1 (DIO1), contribute to fibrosis progression and hepatocellular dedifferentiation. In hepatocellular carcinoma, coordinated downregulation of TRβ and DIO1 establishes a tumor-associated hypothyroid state that promotes metabolic reprogramming and tumor progression. The clinical relevance of TH signaling in MASLD has been underscored by the recent approval of Resmetirom, a liver-targeted TRβ‑selective agonist, for the treatment of non-cirrhotic MASH with moderate-to-severe fibrosis (F2-F3). This approval represents a landmark transition from mechanistic understanding to metabolism-centered precision therapy in MASLD. Clinical trials have demonstrated that Resmetirom not only improves key histological endpoints, including MASH resolution and fibrosis regression, but also favorably modulates atherogenic lipid profiles, highlighting the therapeutic potential of selectively targeting hepatic TH pathways. This review systematically summarizes the multidimensional regulatory roles of TH across the MASLD disease spectrum and discusses emerging diagnostic and therapeutic implications of TH-based interventions, aiming to inform future mechanistic research and optimize clinical management strategies.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.