Objective To explore the impact of meteorological factors on the incidence of scarlet fever in Xicheng District of Beijing, and to provide a scientific basis for formulating targeted prevention and control measures. Methods Daily scarlet fever incidence data and corresponding meteorological data from 2010 to 2019 in Xicheng District of Beijing were collected. Using year, month, and day of the week as time-stratified variables, a conditional logistic regression model with a time-stratified case-crossover design was employed to analyze the impact of different meteorological factors on the number of scarlet fever cases in Xicheng District, while controlling for long-term trends, seasonality and other confounding factors. Results From 2010 to 2019, a total of 3,195 cases of scarlet fever were reported in Xicheng District, with an average annual incidence rate of 24.17/100 000. The overall trend showed fluctuating decline, during which three incidence peaks occurred, with the highest incidence rate observed in 2011. No severe or fatal cases were reported. The incidence of scarlet fever exhibited a distinct seasonal bimodal distribution, primarily concentrated between April to June and November to January of the following year. The conditional logistic regression results showed that the average relative humidity and average temperature were positively correlated with scarlet fever cases (β=0.0203, β=0.0613, P＜0.001), while the average vapor pressure was negatively correlated with scarlet fever cases (β=-0.1468, P＜0.001). Increases average relative humidity and average temperature were risk factors for scarlet fever incidence (OR=1.0205，95%CI=1.0150 -1.0261；OR=1.0632，95%CI=1.0379 -1.0891). For every 1.00% increase in average relative humidity, the number of scarlet fever cases increased by 2.05% (1.50% –2.61%). Similarly, for every 1^。C rise in average temperature, the number of cases increased by 6.32% (3.79% – 8.91%). In contrast, an increase in average vapor pressure had a protective effect against scarlet fever (OR=0.8635,95%CI=0.8392-0.8885). For every 1 hPa increase in average vapor pressure, the number of scarlet fever cases decreased by 13.65% (11.15%–16.08%). Conclusion The average relative humidity, average temperature and average vapor pressure are the primary meteorological factors influencing the incidence of scarlet fever in Xicheng District of Beijing, and can be utilized as indicators for the prevention, control, surveillance and early warning of scarlet fever.

Objective To compare the epidemic characteristics of seasonal influenza in Xicheng District, Beijing, between 2018-2019 and 2023-2024. Methods The present study was a cross-sectional study. The influenza cases and etiological surveillance data of Xicheng District, Beijing in 2018-2019 and 2023-2024, respectively, were analyzed to study the differences in the incidence rate of influenza cases in different ages, regions, occupations, and etiological detection results during the four years. Results There were significant differences in the incidence rates of influenza (χ²=37 038.65，P＜0.05) and the interval between visits (Z=468.692, P < 0.05) in 2018, 2019, 2023 and 2024. There were statistically significant differences in the incidence rates of influenza among different age groups, streets, and occupations during the four years (Z=75.646, 209.276, 72.132, 361.176, 43.570, all P < 0.05). Compared with 2018-2019, the growth rate of influenza in Xicheng District, Beijing in 2023-2024 was the highest in the 15-24 year-old group, Tianqiao Street, and housework and unemployed people. The difference in the interval between influenza visits among people of different age groups during these 4 years was statistically significant (P < 0.05). The growth rate of the interval between influenza visits in Xicheng District, Beijing in 2023-2024 was the highest in the 15-24 year-old group, while it showed a decrease in the 0-4 year-old group. The etiology in 2018-2019 was mainly H1N1 and H3N2 subtypes, and in 2023-2024 it was mainly H3N2 subtype and influenza B, and the peak values of H1N1, H3N2 subtype and influenza B in 2023-2024 were all higher than those in 2018-2019. Conclusion During the epidemic period, non-medical interventions have changed the transmission mode, seasonal peak and subtype distribution of influenza virus. As the epidemic has eased, the pattern of influenza has gradually rebounded.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

Work serves as a critical means of obtaining resources, facilitating personal growth, realizing self-worth, and engaging in social interactions. However, work-related diseases pose significant threats to workers’ health and productivity, and impose considerable economic burdens. This article categorized work-related diseases into six major types, including musculoskeletal disorders, mental and behavioral disorders, cardiovascular and metabolic diseases, digestive system diseases, reproductive system diseases, and non-specific respiratory diseases, and summarized their risk factors, assessment methods, policy regulation, and prevention and control measures. Current research in this field predominantly relies on cross-sectional studies, which present limitations in causal inference and potential risks of bias. Future studies should expand sample sizes, optimize research designs, and establish multidimensional evaluation systems to comprehensively assess the health and economic impacts of work-related diseases. It is recommended to enhance the translation of research findings into practice, thereby providing a scientific basis for the occupational health protection system and promoting the well-being and sustainable development of the working population.

Objective In order to understand the current resistance status of Aedes albopictus(Ae. albopictus) adult population to commonly used insecticides and the resistance dynamics development in Zhejiang Province and provide a theoretical basis for the scientific and rational use of hygienic insecticides. Methods Resistance determination was carried out using the diagnostic dose method(GB/T 26347-2010)recommended by WHO in the adult mosquito contact cylinder method to monitor the resistance of Ae. albopictus field populations in 11 cities and districts in Zhejiang Province in 2024. Results The monitoring result showed that adult Ae. albopictus in 11 areas were resistant or suspected resistant populations to both cis-cypermethrin and permethrin; suspected and resistant populations to the organophosphate insecticide malathion were as high as 81.82%; while suspected resistance to the carbamate insecticide residual carbofuran accounted for 45.45%, and the rest of the monitoring sites were sensitive to it. Conclusions The result suggest that the generalized resistance of Ae. albopictus populations to pyrethroids and organophosphorus insecticides in the field in Zhejiang Province needs to be highly emphasized. In future mosquito vector and mosquito-borne disease control, insecticides should be selected based on the resistance monitoring information, while following scientific guidelines for insecticide use.

Objective To explore the correlation and lag effect between meteorological factors and the incidence of scarlet fever in Xicheng District, Beijing, and to provide a theoretical basis for the surveillance, early warning，and scientific prevention and control of scarlet fever. Methods Based on the daily scarlet fever incidence data and concurrent meteorological data in Xicheng District, Beijing from 2010 to 2019, the distributed lag non-linear model (DLNM) was used to analyze the impact of meteorological factors on the incidence of scarlet fever. Results The risk of scarlet fever was the highest when the daily average temperature was 34.2℃ with a lag of 0 days (RR=1.175, 95% CI:1.006-1.372). The risk was the second highest when the daily average temperature was 2.2℃ with a lag of 12 days (RR=1.123, 95% CI:1.044 -1.209). The cumulative relative risk of scarlet fever was statistically significant when the daily average temperature ranged from 27.2℃ to 34.2℃, with the highest cumulative relative risk at 34.2℃ (RR=1.906, 95%CI:1.215-2.989). When the daily average relative humidity was 19.5% with a lag of 6 days, the risk of scarlet fever incidence was the highest (RR=1.022, 95% CI: 1.005-1.040). The cumulative relative risk was statistically significant when the daily average relative humidity ranged from 24.7% to 40.2%, with the highest cumulative relative risk at 27.3% (RR=1.170, 95% CI: 1.020-1.343). The risk of scarlet fever was the highest when the daily average vapor pressure was 1.2 hPa with a lag of 5 days (RR=1.029, 95%CI:1.008-1.050). The cumulative relative risk of scarlet fever was statistically significant when the daily average vapor pressure was 1.2-7.4 hPa, and the highest cumulative risk was when the daily average vapor pressure was 1.2 hPa (RR=1.362, 95% CI:1.022-1.815). Conclusion There is a nonlinear relationship between meteorological factors and the incidence of scarlet fever in Xicheng District, Beijing, with a certain lag effect. Daily average temperature (27.2-34.2℃), daily average relative humidity (28.6~36.3%) and daily average vapor pressure (1.2-7.4 hPa) increase the risk of scarlet fever. These factors can be used as indicators for the prevention, control, surveillance, and early warning of scarlet fever.

OBJECTIVE To investigate the mechanism through which Danggui buxue decoction regulates neutrophil extracellular traps （NETs） to improve osteoporosis （OP） in rats with premature ovarian failure （POF）. METHODS Female SD rats were randomly divided into normal group， model group， calcitriol group， and Danggui buxue decoction low-dose， medium-dose and high-dose groups， with 9 rats in each group. Except for the normal group， all other groups were administered cisplatin via intraperitoneal injection on days 1 and 8 to establish a POF complicated with OP model. Each group received the corresponding drugs or normal saline intragastrically starting from day 5， once a day， for 4 consecutive weeks. After the last medication， serum levels of estradiol （E2）， NETs， 25-hydroxyvitamin D3 [25（OH）D3]， receptor activator of nuclear factor-κB ligand （RANKL）， and osteocalcin （BGP） were measured. The histopathological changes in bone tissue were observed. The expressions of vitamin D receptor （VDR）， myeloperoxidase （MPO）， neutrophil elastase （NE） and citrullinated histone H3 （CitH3） in bone tissue were detected； the protein expressions of 25-hydroxyvitamin D-1α-hydroxylase （CYP27B1） and 1α，25-dihydroxyvitamin D3-24-hydroxylase （CYP24A1） were also determined. RESULTS Compared with the normal group， the bone tissue of rats in the model group showed a significant reduction in the number of trabeculae， which was thinner broken and poorly connected， with significant destruction of the reticular structure， and an enlarged marrow cavity. Serum levels of NETs and RANKL， the protein expressions of MPO， NE， CitH3 and CYP24A1 in bone tissue were significantly increased or upregulated， while serum levels of E2， 25（OH）D3 and BGP as well as protein expressions of VDR and CYP27B1 were significantly decreased or downregulated （P＜0.05）. Compared with the model group， the histopathological changes in the bone tissue of rats in each administration group showed some degree of recovery， with significant improvements observed in most quantitative indicators （P＜0.05）. CONCLUSIONS Danggui buxue decoction can restore the E2 level in POF complicated with OP rats， and improve OP. The mechanism may be related to its ability to upregulate VD level and inhibit the formation of NETs.

ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.

ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.