Background Pneumoconiosis remains a critical occupational disease in China. As a major industrial province, Hebei historically faced severe challenges regarding this condition. The 1986 national epidemiological survey ranked Hebei sixth in reported pneumoconiosis cases nationwide. Objective To analyze 76 years of pneumoconiosis data (1949–2024) in Hebei Province to provide evidence-based support for prevention and control strategies. Methods Occupational pneumoconiosis cases diagnosed in Hebei from 1949 to 2024 were included. Five-year intervals were used to analyze incidence composition, dust exposure duration, age at first diagnosis, and age at death. A hybrid model, integrating autoregressive integrated moving average (ARIMA) with generalized regression neural network (GRNN), was employed to predict case numbers for the 2025−2030 period. Results A total of 36107 cases of pneumoconiosis were recorded (2.10% female) in Hebei from 1949 to 2024. Stages I, II, and III accounted for 77.35%, 16.45%, and 6.20%, respectively. Silicosis (55.60%), coal workers’ pneumoconiosis (27.24%), and pottery workers’ pneumoconiosis (8.88%) were the predominant types. Observed trends included a shortened dust exposure duration [silicosis: (12.78±7.063) years in 2020–2024] and an increasing age at first diagnosis [(54.01±7.499) years in 2020–2024]. The case-fatality rate was 14.84%, with a rising age at death [(82.26±9.632) years in 2015–2019]. Three incidence peaks (1963, 1984, and 2014) correlated with national policies and industrialization phases. The number of pneumoconiosis cases showed a decreasing trend from 2015 to 2024. Chengde and Tangshan were identified as current high-risk areas. The ARIMA-GRNN model projected annual cases between 416 and 429 during 2025–2030. Conclusion In the past decade，the number of pneumoconiosis cases in Hebei Province had shown a decreasing trend, it is projected to plateau with no significant decline over the next five years. Furthermore, challenges such as the proportion of silicosis remaining high and shortened dust exposure duration remain severe. It is recommended to focus on key regions like Chengde (ore mining) and Tangshan (ceramics industry). A comprehensive strategy integrating stricter regulation, technological controls, model innovation, and targeted interventions should be implemented to achieve a further substantial reduction in pneumoconiosis incidence.

Background Pneumoconiosis remains a critical occupational disease in China. As a major industrial province, Hebei historically faced severe challenges regarding this condition. The 1986 national epidemiological survey ranked Hebei sixth in reported pneumoconiosis cases nationwide. Objective To analyze 76 years of pneumoconiosis data (1949–2024) in Hebei Province to provide evidence-based support for prevention and control strategies. Methods Occupational pneumoconiosis cases diagnosed in Hebei from 1949 to 2024 were included. Five-year intervals were used to analyze incidence composition, dust exposure duration, age at first diagnosis, and age at death. A hybrid model, integrating autoregressive integrated moving average (ARIMA) with generalized regression neural network (GRNN), was employed to predict case numbers for the 2025−2030 period. Results A total of 36107 cases of pneumoconiosis were recorded (2.10% female) in Hebei from 1949 to 2024. Stages I, II, and III accounted for 77.35%, 16.45%, and 6.20%, respectively. Silicosis (55.60%), coal workers’ pneumoconiosis (27.24%), and pottery workers’ pneumoconiosis (8.88%) were the predominant types. Observed trends included a shortened dust exposure duration [silicosis: (12.78±7.063) years in 2020–2024] and an increasing age at first diagnosis [(54.01±7.499) years in 2020–2024]. The case-fatality rate was 14.84%, with a rising age at death [(82.26±9.632) years in 2015–2019]. Three incidence peaks (1963, 1984, and 2014) correlated with national policies and industrialization phases. The number of pneumoconiosis cases showed a decreasing trend from 2015 to 2024. Chengde and Tangshan were identified as current high-risk areas. The ARIMA-GRNN model projected annual cases between 416 and 429 during 2025–2030. Conclusion In the past decade，the number of pneumoconiosis cases in Hebei Province had shown a decreasing trend, it is projected to plateau with no significant decline over the next five years. Furthermore, challenges such as the proportion of silicosis remaining high and shortened dust exposure duration remain severe. It is recommended to focus on key regions like Chengde (ore mining) and Tangshan (ceramics industry). A comprehensive strategy integrating stricter regulation, technological controls, model innovation, and targeted interventions should be implemented to achieve a further substantial reduction in pneumoconiosis incidence.

BACKGROUND:During diabetic wound healing,the sustained activation of M1 macrophages exacerbates the inflammatory response and hinders wound repair.Auranofin,an anti-inflammatory drug,has not been clearly studied for its effects on M1 macrophages and its potential role in diabetic wound healing.OBJECTIVE:To investigate the effects of different concentrations of auranofin on the biological function of M1 macrophages and evaluate its potential application in diabetic wound healing.METHODS:RAW264.7 and THP-1 cells were used as research models.M1 polarization was induced using different concentrations of interferon-γ and lipopolysaccharide.M1 macrophages were treated with 1 and 2 μmol/L auranofin.Cell counting kit-8 assay was used to evaluate the effect of auranofin on cell viability.Quantitative real-time PCR was performed to detect mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.ELISA was employed to measure the levels of interleukin-1β,interleukin-6,and tumor necrosis factor-α in the supernatant.Western blot analysis was used to assess the expression of nuclear factor-κB(p65),phosphorylated mitogen-activated protein kinases(MAPK),and total MAPK proteins.Additionally,6-8-week-old male C57BL/6J and db/db diabetic mice were used for wound healing experiments,with the mice divided into C57 control,db/db control and auranofin treatment groups,each containing six animals.Dorsal skin defect modeling and treatment with intraperitoneal injection of auranofin were performed to observe wound healing in mice.RESULTS AND CONCLUSION:(1)Cell experiments showed that co-treatment with interferon-y(10 ng/mL)and lipopolysaccharide(100 ng/mL)significantly induced M1 polarization in RAW264.7 and THP-1 cells,resulting in increased mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.Treatment with auranofin(1 and 2 μmol/L)reduced the mRNA expression of these inflammatory factors in the cells and inhibited the secretion of inflammatory factors in the cell supernatant.(2)Auranofin treatment significantly suppressed the activation of nuclear factor-κB(p65)and phosphorylated MAPK signaling pathways.(3)Animal experiments showed that auranofin promoted wound healing in db/db diabetic mice,suggesting that auranofin has strong anti-inflammatory effects and may facilitate the healing of wounds in diabetic mice.

Objective: To establish a rapid, accurate, and decentralized workflow for bacterial whole-genome sequencing (WGS) and risk profiling within the shelf-life of platelet concentrates, and to characterize the species, virulence, antimicrobial resistance (AMR), and immune evasion mechanisms of co-existing bacteria in qualified platelet products, thereby providing a scientific basis for transfusion safety assessment. Methods: Three units of platelet concentrates, which tested negative by routine bacterial screening, were collected from the Chengdu Blood Center between May and June 2025. Samples were enriched at 37℃under six aerobic and nine anaerobic conditions for 7 days. Using a culturomics strategy, aliquots were plated for isolation on days 1, 3, 5, and 7 to obtain cultivable isolates, with negative culture controls included to exclude contamination. High-molecular-weight genomic DNA was extracted via mechanical grinding, purified, and size-selected. Sequencing libraries were constructed and sequenced on the G-seq500 single-molecule nanopore sequencing platform. Genomes were assembled using Flye and polished with NextPolish, with quality evaluated by BUSCO and CheckM. Taxonomic identification was performed using GTDB-Tk. Functional annotation and database comparisons were conducted to analyze virulence factors, AMR genes, and genes related to immune evasion and environmental adaptation. Results: Viable bacteria were successfully isolated from all three qualified platelet units within their shelf life. The isolates were identified as Bacillus albus, Niallia taxi, and Staphylococcus warneri. Nanopore sequencing generated 92 227-109 813 reads (totaling 680-758 Mb) with an N50 of 7 625-8 584 bp and Q20/Q30 scores of 97%/93%, respectively. All three genomes were assembled into complete circular chromosomes with 1-3 plasmids, achieving >93% completeness. Functional analysis revealed that B. albus carried multiple hemolysins, metalloproteases, and multidrug resistance genes, indicating the highest potential pathogenicity and AMR risk. S. warneri exhibited a typical multidrug resistance profile and regulatory network characteristic of coagulase-negative staphylococci, suggesting intermediate virulence. N. taxi harbored few canonical virulence factors and lacked functional AMR determinants, presenting a "low-virulence, low-resistance" profile. Notably, all three strains were enriched in genes encoding antimicrobial peptide resistance systems (e.g., dltABCD, mprF, GraRS, BceAB) and antioxidant enzymes, suggesting a strong capacity to withstand immune stress in the blood environment. Conclusion: Viable bacteria can be recovered from qualified platelet concentrates that test negative by routine screening. Nanopore WGS enables rapid strain-level identification and comprehensive risk profiling of virulence, resistance, and immune adaptation traits. The functional repertoires of these "co-existing" isolates range from environmental adaptation to potential pathogenicity, representing an underappreciated risk for transfusion-transmitted infections in susceptible recipients.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

BACKGROUND:During diabetic wound healing,the sustained activation of M1 macrophages exacerbates the inflammatory response and hinders wound repair.Auranofin,an anti-inflammatory drug,has not been clearly studied for its effects on M1 macrophages and its potential role in diabetic wound healing.OBJECTIVE:To investigate the effects of different concentrations of auranofin on the biological function of M1 macrophages and evaluate its potential application in diabetic wound healing.METHODS:RAW264.7 and THP-1 cells were used as research models.M1 polarization was induced using different concentrations of interferon-γ and lipopolysaccharide.M1 macrophages were treated with 1 and 2 μmol/L auranofin.Cell counting kit-8 assay was used to evaluate the effect of auranofin on cell viability.Quantitative real-time PCR was performed to detect mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.ELISA was employed to measure the levels of interleukin-1β,interleukin-6,and tumor necrosis factor-α in the supernatant.Western blot analysis was used to assess the expression of nuclear factor-κB(p65),phosphorylated mitogen-activated protein kinases(MAPK),and total MAPK proteins.Additionally,6-8-week-old male C57BL/6J and db/db diabetic mice were used for wound healing experiments,with the mice divided into C57 control,db/db control and auranofin treatment groups,each containing six animals.Dorsal skin defect modeling and treatment with intraperitoneal injection of auranofin were performed to observe wound healing in mice.RESULTS AND CONCLUSION:(1)Cell experiments showed that co-treatment with interferon-y(10 ng/mL)and lipopolysaccharide(100 ng/mL)significantly induced M1 polarization in RAW264.7 and THP-1 cells,resulting in increased mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.Treatment with auranofin(1 and 2 μmol/L)reduced the mRNA expression of these inflammatory factors in the cells and inhibited the secretion of inflammatory factors in the cell supernatant.(2)Auranofin treatment significantly suppressed the activation of nuclear factor-κB(p65)and phosphorylated MAPK signaling pathways.(3)Animal experiments showed that auranofin promoted wound healing in db/db diabetic mice,suggesting that auranofin has strong anti-inflammatory effects and may facilitate the healing of wounds in diabetic mice.

This article discusses the syndrome differentiation and treatment of stress urinary incontinence from the perspectives of the lungs， kidneys， and heart. It is suggested that the initial stage of the disease is marked by the dysfunction of the lung and the disorder of qi movement， while the intermediate stage is characterized by the obstruction of qi movement and the instability of the kidney， and the advanced stage is characterized by the depletion of the kidney and the disturbance of the spirit. According to the characteristics of the disease and the changes in the pathogenesis， the methods are recommended including regulating the lung， boosting qi and governing water， nourishing the kidney and enriching essence， and calming the mind and soothing the spirit. Accordingly， self-designed prescriptions such as Shenqi Lifei Decoction（参芪利肺汤）， Yiqi Gupao Decoction（益气固脬汤）， and Yishen Shenning Decoction（益肾神宁汤）with modifications can be used to regulate the lungs， adjust the kidneys， and calm the mind， thereby achieving the treatment of stress urinary incontinence from the perspectives of the lungs， kidneys， and heart.

Objective:To explore the value and related mechanism of preoperative serum sialic acid (SA) on evaluating microvascular invasion (MVI) in patients with intrahepatic cholangiocarcinoma (ICC).Methods:A total of 91 patients who underwent surgical resection and were pathologically diagnosed with ICC from December 2020 to September 2024 at the Oriental Hepatobiliary Surgery Hospital affiliated to the Naval Medical University were included in this retrospective analysis. The patients were divided into non-MVI (41 cases) and MVI groups (50 cases). The general data and laboratory examination indexes were collected and analyzed. Univariate and multivariate logistic regression analyses were performed to identify independent risk factors for predicting MVI. The predictive value of serum indicators for MVI was evaluated by receiver operating characteristic curves. The correlation between MVI and SA was analyzed by point-biserial correlation. ICC cells stably overexpressing β-galactoside α2, 6-sialyltransferase 1 (ST6GAL1) were generated through lentiviral transfection. ST6GAL1 protein expression and mRNA expression were detected by Western blot and quantitative real-time polymerase chain reaction, respectively. Sambucus nigra (SNA) lectin fluorescence staining was used to detect α2, 6-sialylation levels on cells. Cell migration ability was assessed by wound healing and Transwell assays, and cell proliferation was evaluated by colony formation assays.Results:Compared with the non-MVI group, patients in the MVI group exhibited significantly higher levels of fibrinogen, aspartate aminotransferase, gamma-glutamyl transferase, alkaline phosphatase, SA and 5′-nucleotidase (5′-NT) (all P<0.05). Multivariate logistic regression analysis revealed that SA ( OR=1.01,95% CI 1.01-1.02, P=0.023) was the only independent predictor for MVI. The area under curve of SA in predicting MVI was 0.757 (95% CI 0.640-0.870), sensitivity 67.65%, specificity 77.78%. SA was positively correlated with MVI ( r=0.443, P<0.001). ICC cells overexpressing ST6GAL1 were featured with increased mean fluorescence intensity of SNA lectin, and increased level of α2, 6-sialylation on the cell surface (both P<0.05). The number of colonies formed by hypersialylated ICC cells was also increased ( P<0.05), and both the migration rate and the number of migrating cells were significantly higher ( P<0.05). Conclusions:Serum SA is an independent predictor for MVI in ICC patients. Hypersialylation in ICC cells is associated with higher malignancy.