Zoonosis prevention and control is a complex public health concern, which requires the collaboration of multiple regions, disciplines, and departments to enhance the effectiveness. The One Health concept aims to achieve the joint health security of humans, animals and environments through cross-disciplinary, cross-sector and cross-field collaborations. This review summarizes the development of One Health and the successful practices in the prevention and control of echinococcosis, rabies, COVID-19 and schistosomiasis, as well as explores the challenges faced in applying this concept to the prevention and control of zoonoses, so as to provide insights into formulation of the integrated zoonoses control strategy and implementation of zoonoses control interventions at the human-animal-environment interface.

Parkinson’s disease (PD) is a common neurodegenerative disorder that significantly impacts patients’ independence and quality of life, imposing a substantial burden on both individuals and society. Although dopaminergic replacement therapies provide temporary relief from various symptoms, their long-term use often leads to motor complications, limiting overall effectiveness. In recent years, non-invasive deep brain stimulation (DBS) techniques have emerged as promising therapeutic alternatives for PD, offering a means to modulate deep brain regions with high precision without invasive procedures. These techniques include temporal interference stimulation (TIs), low-intensity transcranial focused ultrasound stimulation (LITFUS), transcranial magneto-acoustic stimulation (TMAS), non-invasive optogenetic modulation, and non-invasive magnetoelectric stimulation. They have demonstrated significant potential in alleviating various PD symptoms by modulating neural activity within specific deep brain structures affected by the disease. Among these approaches, TIs and LITFUS have received considerable attention. TIs generate low-frequency interference by applying two slightly different high-frequency electric fields, targeting specific brain areas to alleviate symptoms such as tremors and bradykinesia. LITFUS, on the other hand, uses low-intensity focused ultrasound to non-invasively stimulate deep brain structures, showing promise in improving both motor function and cognition in PD patients. The other three techniques, while still in early research stages, also hold significant promise for deep brain modulation and broader clinical applications, potentially complementing existing treatment strategies. Despite these promising findings, significant challenges remain in translating these techniques into clinical practice. The heterogeneous nature of PD, characterized by variable disease progression and individualized treatment responses, necessitates flexible protocols tailored to each patient’s unique needs. Additionally, a comprehensive understanding of the mechanisms underlying these treatments is crucial for refining protocols and maximizing their therapeutic potential. Personalized medicine approaches, such as the integration of neuroimaging and biomarkers, will be pivotal in customizing stimulation parameters to optimize efficacy. Furthermore, while early-stage clinical trials have reported improvements in certain symptoms, long-term efficacy and safety data are limited. To validate these techniques, large-scale, multi-center, randomized controlled trials are essential. Parallel advancements in device design, including the development of portable and cost-effective systems, will improve patient access and adherence to treatment protocols. Combining non-invasive DBS with other interventions, such as pharmacological treatments and physical therapy, could also provide a more comprehensive and synergistic approach to managing PD. In conclusion, non-invasive deep brain stimulation techniques represent a promising frontier in the treatment of Parkinson’s disease. While they have demonstrated considerable potential in improving symptoms and restoring neural function, further research is needed to refine protocols, validate long-term outcomes, and optimize clinical applications. With ongoing technological and scientific advancements, these methods could offer PD patients safer, more effective, and personalized treatment options, ultimately improving their quality of life and reducing the societal burden of the disease.

The liver, skeletal muscle, and adipose tissue are central energy-metabolizing organs and insulin-sensitive tissues, playing a crucial role in maintaining glucose homeostasis. As the powerhouse of the cell, mitochondria not only regulate insulin secretion but also oversee the oxidative phosphorylation and β-oxidation of fatty acids, processes vital for the metabolism of carbohydrates and fats, as well as the synthesis of ATP. The mitochondrial quality control system is of paramount importance for sustaining mitochondrial homeostasis, achieved through mechanisms such as protein homeostasis, mitochondrial dynamics, mitophagy, and biogenesis. Evidence suggests that dysfunctional mitochondria may significantly contribute to insulin resistance and ectopic fat storage in the liver, offering new insights into the strong correlation between mitochondrial dysfunction and the development of obesity, diabetes mellitus type 2 (T2DM), and non-alcoholic fatty liver disease (NAFLD). This manuscript aims to delve into the precise mechanisms by which imbalances in mitochondrial quality control lead to metabolic disorders in the liver, skeletal muscle, and adipose tissue, the 3 major insulin-sensitive organs. In the liver, mitochondrial dysfunction can lead to disturbances in glucose and lipid metabolism, resulting in insulin resistance and fat accumulation—a key factor in the development of NAFLD. In skeletal muscle, reduced mitochondrial function can decrease ATP production, weakening the muscle’s ability to uptake glucose, thereby exacerbating insulin resistance. In adipose tissue, mitochondrial dysfunction can impair adipocyte function, leading to lipotoxicity and inflammatory responses,which further contribute to insulin resistance and the onset of metabolic syndrome. Moreover, the interorgan crosstalk among these 3 tissues is essential for overall metabolic homeostasis. For instance, hepatic gluconeogenesis and glucose utilization in skeletal muscle are both influenced by the health status of their respective mitochondrial populations. The conversion between different types of adipose tissue and the ability to store lipids depend on normal mitochondrial function to avert ectopic fat accumulation in other organs. In summary, this manuscript emphasizes the critical role of mitochondrial quality control in maintaining the metabolic stability of the liver, skeletal muscle, and adipose tissue. It elucidates the specific mechanisms by which mitochondrial dysfunction in these organs contributes to the development of metabolic diseases, providing a foundation for future research and the development of therapeutic strategies targeting mitochondrial dysfunction.

Objective To investigate the prevalence of Schistosoma japonicum infections in wild rodents in schistosomiasis-endemic areas of China, so as to provide insights into formulation of technical guidelines for monitoring of and the precise control strategy for S. japonicum infections in wild rodents during the elimination phase. Methods Two administrative villages where schistosomiasis was historically highly prevalent were selected each from Dongzhi County, Anhui Province, and Duchang County, Jiangxi Province as study villages. Wild rodents were captured from study villages with baited traps or cages at night in June and September, 2021. The number of rodents captured was recorded, and the rodent species was characterized based on morphologi-cal characteristics. Liver tissues were sampled from captured rodents for macroscopical observation of the presence of egg granu- lomas, and S. japonicum infection was detected simultaneously using liver tissue homogenate microscopy, examinations of mesenteric tissues for parasites, and modified Kato-Katz thick smear technique (Kato-Katz technique). A positive S. japonicum infection was defined as detection of S. japonicum eggs or adult worms by any of these methods. The rate of wild rodent capture and prevalence of S. japonicum infections in wild rodents were compared in different study villages and at different time periods, and the detection of S. japonicum infections in wild rodents was compared by different assays. Results The overall rate of wild ro- dent capture was 8.28% (237/2 861) in Dongzhi County, and the wild rodent capture rates were 9.24% (133/1 439) and 7.31% (104/1 422) in two study villages (χ² = 3.503, P = 0.061), and were 8.59% (121/1 409) and 7.99% (116/1 452) in June and September, 2021, respectively (χ² = 0.337, P = 0.561). The overall rate of wild rodent capture was 3.72% (77/2 072) in Duchang County, and the wild rodent capture rates were 6.91% (67/970) and 0.91% (10/1 102) in two study villages (χ² = 51.901, P < 0.001), and were 4.13% (39/945) and 3.37% (38/1 127) in June and September, 2021, respectively (χ² = 0.815, P = 0.365). Rattus norvegicus was the predominant rodent species captured in both counties, accounting for 70.04% (166/237) of all captured wild rodents in Dongzhi County and 88.31% (68/77) in Duchang County. No S. japonicum infection was detected in wild rodents captured in Duchang County. Nevertheless, the overall prevalence of S. japonicum infections was 51.05% (121/237) in wild rodents captured in Dongzhi County, with prevalence rates of 50.38% (67/133) and 51.92% (54/104) in two study villages (χ² = 0.098, P = 0.755), and 54.31% (63/116) and 47.93% (58/121) in September and June, 2021, respectively (χ² = 0.964, P = 0.326). Of 237 wild rodents captured in Dongzhi County, there were 140 (59.07%) rodents with visible hepatic egg granulomas, 117 (49.47%) tested positive for S. japonicum eggs by liver tissue homogenate microscopy, 34 (14.35%) tested positive for S. japonicum eggs with Kato-Katz technique; however, no adult S. japonicum worms were detected in mesenteric tissues. In addition, hepatic egg granulomas were found in all wild rodents tested positive for S. japonicum eggs with liver tissue homogenate microscopy. Conclusions The rate of wild rodent capture and prevalence of S. japonicum infection in wild rodents vary greatly in schistosomiasis-endemic areas of China, and the prevalence of S. japonicum infection is slightly higher in wild rodents captured in autumn than in summer. Liver tissue is recommended as the preferred sample for surveillance of S. japonicum infection in wild rodents, and a combination of macroscopical observation of hepatic egg granulomas and liver tissue homogenate microscopy may be a standard method for surveillance of S. japonicum infection in wild rodents.

Objective To investigate the epidemiological characteristics of dengue fever in Shenzhen City in 2024, so as to provide insights into formulation of the preventive and control measures for dengue fever. Methods The epidemiological data of dengue cases reported in Shenzhen City in 2024 were extracted from the China Disease Prevention and Control Information System and field epidemiological survey data of dengue fever in Shenzhen City, and the temporal, regional and population distributions of dengue fever cases, source of acquire dengue virus infections, disease diagnosis and treatment and outbreaks were analyzed. The dengue virus nucleic acid was tested and the serotypes of dengue virus were characterized using real-time quantitative reverse transcription PCR (RT-qPCR) assay, and the dengue virus gene was sequenced using next-generation sequencing (NGS). In addition, the surveillance on the density of Aedes albopictus was performed using Breteau index (BI) and mosquito oviposition index (MOI). Results A total of 1 735 dengue fever cases were reported in Shenzhen City in 2024, including 952 local cases and 783 imported cases. Most imported dengue fever cases acquired infections from eight cities of Foshan, Guangzhou, Zhongshan, Jiangmen, Dongguan, Zhaoqing, Huizhou, and Zhuhai in the Pearl River Delta region (664 cases, 84.8% of total imported cases) into Baoan, Longgang, and Nanshan districts. The epidemic exhibited an early onset and rapid progression, peaking during the period between September and November (1 632 cases, 94.1% of total cases), and dengue fever cases were distributed across 73 subdistricts in 10 districts, with most cases reported in densely populated central and western regions. The dengue fever cases had a male-to-female ratio of 1.9∶1.0, and a median age of 37 (21) years, with a higher median age among local cases than among imported cases [40 (20) years vs. 33(15) years; Z = -10.30, P < 0.05]. Housework, unemployment, workers, and business service were predominant occupations (1 405 cases, 81.0% of total cases), and there was a significant difference in the constituent ratio of occupations between local and imported cases (χ² = 92.30, P < 0.05). Among the 1 735 dengue fever cases, the median duration from onset to definitive diagnosis was 3.3 (2.9) days, and 1 686 cases (97.2%) were identified in healthcare facilities, with a low rate of hospitalization and isolation seen in 1 701 inpatients with available epidemiological data (485 cases, 28.5% of total inpatients). A total of 29 outbreaks of dengue fever occurred in Shenzhen City across 2024, which primarily in construction sites (27 outbreaks, 93.1% of total). Dengue virus type I was the dominant serotype causing dengue fever in Shenzhen City in 2024. Sequencing showed that the genomes of dengue virus from multiple dengue fever cases in Shenzhen City shared a high sequence homology with those from cities neighboring Shenzhen City, and there might be intra-city transmission of dengue virus among multiple construction sites in Shenzhen City. The Aedes albopictus density was significantly higher in Shenzhen City in 2024 than in 2023, peaking from May to September. The annual MOI values ranged from 0.9 to 14.0, and the BI values ranged from 0.6 to 6.0. Conclusions The overall epidemic of dengue fever was severe in Shenzhen City in 2024, which was greatly affected by case importation from neighboring cities, construction sites-centered local transmission, and the effectives of routine mosquito vector control was not satisfactory. Integrated dengue fever control measures should be implemented, focusing on regional joint prevention and control mechanisms, capacity building for mosquito vector control, addressing challenges in epidemic containment at construction sites, and strengthening case detection and management systems.

Objective To minimize variations in treatment outcomes of L5/S1 percutaneous intervertebral radiofrequency thermocoagulation(PIRFT)arising from physician proficiency and achieve precise quantitative risk assessment of the puncture paths.Methods We used a self-developed deep neural network DWT-UNet for automatic segmentation of the magnetic resonance(MR)images of the L5/S1 segments into 7 key structures:L5,S1,Ilium,Disc,N5,Dura mater,and Skin,based on which a needle insertion path planning environment was modeled.Six hard constraints and 6 soft constraints were proposed based on clinical criteria for needle insertion,and the physician's experience was quantified into weights using the analytic hierarchy process and incorporated into the risk function for needle insertion paths to enhance individual case adaptability.By leveraging the proposed skin entry point sampling sub-algorithm and Kambin's triangle projection area sub-algorithm in conjunction with the analytic hierarchy process,and employing various technologies such as ray tracing,CPU multi-threading,and GPU parallel computing,a puncture path was calculated that not only met clinical hard constraints but also optimized the overall soft constraints.Results A surgical team conducted a subjective evaluation of the 21 needle puncture paths planned by the algorithm,and all the paths met the clinical requirements,with 95.24%of them rated excellent or good.Compared with the physician's planning results,the plans generated by the algorithm showed inferior DIlium,DS1,and Depth(P<0.05)but much better DDura,DL5,DN5,and AKambin(P<0.05).In the 21 cases,the planning time of the algorithm averaged 7.97±3.73 s,much shorter than that by the physicians(typically beyond 10 min).Conclusion The multi-constraint optimal puncture path planning algorithm offers an efficient automated solution for PIRFT of the L5/S1 segments with great potentials for clinical application.

Objective·To reveal the direction,efficiency,and mechanical load of single tooth displacement with clear aligners for expansion treatment during the transitional dentition period with the aid of finite element analysis.Additionally,overcorrection and torque compensation systems were designed to address insufficient expansion efficiency and buccal inclination of posterior teeth.Methods·One volunteer in mixed dentition period was included to construct a three dimentional cranio-maxillary complex model and an invisible orthodontic system,simulating the buccal displacement(load 1?4:0.200,0.275,0.300,0.325 mm,respectively)and root buccal torque(load 1:buccal displacement load 0.200 mm,root buccal torque 0°;load 5:buccal displacement load 0.275 mm,root buccal torque 1.0°;load 6:buccal displacement load 0.300 mm,root buccal torque 1.3° and load 7:buccal displacement load 0.325mm,root buccal torque 1.8°)on the maxillary deciduous teeth to the first permanent molar with a non bracket invisible orthodontic appliance.Through finite element analysis,the tooth displacement and equivalent stress distribution of the periodontal membrane can be calculated.Results·Expansion treatment with clear aligners in the transitional dentition phase primarily revealed the effect of buccal expansion of teeth;different teeth achieved different levels of expansion rate.At a set expansion amount of 0.200 mm per side,expansion efficiency in the maxillary first permanent molar was 51.86%,second primary molar 68.76%,first primary molar 73.48%,and primary cuspid 84.17%.By designing over-correction(0.275,0.300,0.325 mm),the results showed significant enhancement in expansion effect.When overcorrection length reached 150%(0.300 mm),expansion efficiency at the maxillary first permanent molar,second primary molar,first primary molar,and primary cuspid were 75.16%,99.96%,107.35%,and 122.37%,respectively.The expansion efficiency of maxillary second primary molar,first primary molar,and primary cuspid was close to 100.00%.The overcorrection design exacerbated the dental effects of expansion,intensifying the tendency for teeth to tilt toward the cheek side,leading to side effects such as buccal inclination and drooping of the palatal cusps.When the overcorrection amount for expansion reached 150%,the crown-root displacement in the upper first permanent molar,second primary molar,first primary molar,and primary cuspid were-0.109,-0.134,-0.132,and-0.298 mm,respectively.Applying specific torque compensation for different tooth positions can combat the buccal inclination of posterior teeth.At an overcorrection length of 150%(0.300 mm)with an added 1.3° root buccal torque,expansion efficiency was 56.15%,73.88%,79.49%,and 87.80%,respectively.While the crown-root displacement differences reduced to-0.081,-0.097,-0.095,and-0.208 mm.Conclusion·When using clear aligners for expansion treatment during a transitional dentition period,side effects such as buccal inclination of posterior teeth exist.Furthermore,various teeth realize differing levels of expansion efficiency,necessitating the design of unique adjustment strategies according to different tooth positions.Overcorrection can improve expansion efficiency but needs to be coordinated with root buccal torque for the whole tooth to move buccally.

Objective To minimize variations in treatment outcomes of L5/S1 percutaneous intervertebral radiofrequency thermocoagulation(PIRFT)arising from physician proficiency and achieve precise quantitative risk assessment of the puncture paths.Methods We used a self-developed deep neural network DWT-UNet for automatic segmentation of the magnetic resonance(MR)images of the L5/S1 segments into 7 key structures:L5,S1,Ilium,Disc,N5,Dura mater,and Skin,based on which a needle insertion path planning environment was modeled.Six hard constraints and 6 soft constraints were proposed based on clinical criteria for needle insertion,and the physician's experience was quantified into weights using the analytic hierarchy process and incorporated into the risk function for needle insertion paths to enhance individual case adaptability.By leveraging the proposed skin entry point sampling sub-algorithm and Kambin's triangle projection area sub-algorithm in conjunction with the analytic hierarchy process,and employing various technologies such as ray tracing,CPU multi-threading,and GPU parallel computing,a puncture path was calculated that not only met clinical hard constraints but also optimized the overall soft constraints.Results A surgical team conducted a subjective evaluation of the 21 needle puncture paths planned by the algorithm,and all the paths met the clinical requirements,with 95.24%of them rated excellent or good.Compared with the physician's planning results,the plans generated by the algorithm showed inferior DIlium,DS1,and Depth(P<0.05)but much better DDura,DL5,DN5,and AKambin(P<0.05).In the 21 cases,the planning time of the algorithm averaged 7.97±3.73 s,much shorter than that by the physicians(typically beyond 10 min).Conclusion The multi-constraint optimal puncture path planning algorithm offers an efficient automated solution for PIRFT of the L5/S1 segments with great potentials for clinical application.

Purpose Focusing on the characteristics of for-malin fixed paraffin embedded(FFPE)samples,explored nano-magnetic bead nucleic acid extraction solutions with higher qual-ity/yield and continued to improve molecular pathology technolo-gy.Methods Alternative magnetic beads were synthesised in four major categories and 15 sub-categories and we screened to obtain high-quality/yield magnetic beads centred on FFPE samples.Simulated conventional tissues,simulated coarse needle punctures(liver),and simulated fiberoptic bronchoscopy sam-ples(lungs)were sectioned with the same number of serial slices in tubes.The nucleic acids of slices were extracted using the best magnetic beads screened in this study and common com-mercially available kits,and then perform comparison and purifi-cation quality parameters such as total amount and fragment size.The downstream applications of nucleic acids were validated by PCR and Sanger sequencing.Results Screening all homemade nanomagnetic beads centered on the DNA of FFPE samples,the total recoveries of the best performance nanomagnetic beads were obtained to be 58.5％±1.58％,and the total recoveries of five commercially available commercial magnetic beads and three do-mestic kit magnetic beads ranged from 18.68％to 40.71％.The total amount of DNA(ng)extracted from the same amount of tis-sue(serial slices),the nucleic acid yield of this study in simu-lated conventional tissues,simulated coarse needle punctures,and simulated fiberoptic bronchoscopy samples were increased by 39.49％-181.72％compared with those of the commercially a-vailable kits(P＜0.05).The total amount of extracted nucleic acid from simulated fiberoptic bronchoscopy tissue sections can be more than 100 ng for 1 slice(4 μm)and more than 400 ng for 5 slices.Conclusion The DNA purification nanomagnetic beads screened with DNA from FFPE samples have a significant enhancement comparing to the existing commercial bead proto-cols,and provide space for quality assurance,automated testing,and program expansion for clinical molecular pathology testing.

Objective To analyze the effects of three sterilization methods,namely,pressure steam,low-temperature plasma and ethylene oxide,on the magnetic flux of magnetic surgical devices and their sterilization costs.Methods A total of 234 magnetic surgical devices of different specifications and models(magnetic rings)were randomly divided into Group A,Group B and Group C after the paired number was labelled,and each group consisted of 78 pieces(39 pairs).After packaging each pair of devices according to sterilization specifications,Group A was sterilized by pressure steam,Group B was sterilized by low-temperature plasma,and Group C was sterilized by ethylene oxide.We measured the magnetic flux of three sets of magnetic rings before and after sterilization,and comparatively analyzed the sterilization cost and sterilization time of the single package.Results There was no statistically significant difference in the impact of the three sterilization methods on the magnetic flux of the magnetic surgical devices(P＞0.05),but there was a significant difference in the magnetic flux before and after sterilization for each sterilization method(P＜0.001);the sterilization cost was(1.96±0.16)yuan for Group A,(23.17±0.32)yuan for Group B,and(8.16±0.18)yuan for Group C,showing statistically significant differences among the three groups(P＜0.01).The sterilization time was(65.21±3.36)min for Group A,(45.46±1.39)min for Group B,and(1020.38±12.21)min for Group C,with statistically significant differences among the three groups(P＜0.01).Conclusion None of the three sterilization methods affects the magnetic flux of the magnetic surgical devices.Pressure steam method shows the lowest cost of single package,low-temperature plasma method shows the highest cost of single package,while ethylene oxide method shows the highest sterilization time.Pressure steam should be the preferred sterilization method for magnetic surgical devices.