Fecal microbiota transplantation (FMT) technology originated in China during the Eastern Jin Dynasty and has rapidly developed over the past two decades, becoming a primary method for studying the causal relationship between gut microbiota and the occurrence and progression of diseases. At the same time, the therapeutic effects of FMT in the field of gastrointestinal diseases have gained widespread recognition and are gradually expanding into other disease areas. The FMT procedure is relatively complex, and there is currently no standardized method; its success is influenced by various factors, including the donor, recipient, processing of the fecal material, and the method of implantation. Given the increasingly recognized relationship between gut microbiota and various diseases, FMT has become a research hotspot in both scientific studies and clinical applications, achieving a series of significant advancements. To help researchers better understand this technology, this paper will outline the development history of FMT, summarize common operational methods in research and clinical settings, review its application progress, and look forward to future development directions.

Objective To analyze the urban drinking water quality and its influencing factors in Anhui Province from 2014 to 2022, and to provide a scientific basis for water quality improvement and protection. Methods The data were collected, saved and monitored according to the Standard Test Method for Drinking Water (GB/T5750-2006) and evaluated according to the Hygienic Standard for Drinking Water (GB 5749-2006). Results A total of 20 941 samples were collected, and the overall qualified rate was 84.26%. The qualified rate of urban drinking water increased from 76.9% in 2014 to 93.3% in 2022, and the qualified rate of water quality was on the rise (χ²=544.43, P＜0.01). From 2014 to 2022, the qualified rate of water quality in dry season was higher than that in wet season (χ²=35.98, P<0.001), the qualified rate of surface water was higher than that of ground water (χ²=4440.8, P<0.001), and the qualified rate of peripheral tap water was higher than that of factory water (χ²=145.1, P<0.001). Among all kinds of disinfection methods, chlorination disinfection had the highest qualified rate (χ²=1483.8, P<0.001). The qualified rate of water quality increased with the increase of the scale of water plant. Among the inspected indicators, the main unqualified indicators were chlorine dioxide (7.72%), fluoride (7.41%), free residual chlorine (3.90%), and total bacterial count (2.13%). Conclusion The passing rate of urban drinking water quality in Anhui Province is on an upward trend, and the quality of urban drinking water has improved. However, it is still important to pay attention to the problem of excessive microorganism and fluoride in water, and the quality of drinking water varies from place to place.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

This article systematically reviews the role and relationship of heme oxygenase （HO） in the pathogenesis of metabolic associated fatty liver disease （MAFLD） and discusses the biological function of HO， its expression in the liver， its association with lipid metabolism， and its regulatory role in inflammatory reaction and oxidative stress， in order to reveal the potential therapeutic targets and mechanism of HO in MAFLD and provide new perspectives and directions for future treatment strategies.

In cases where a tracheal injury exceeds half the length of the adult trachea or one-third of the length of the child trachea, it becomes difficult to perform end-to-end anastomosis after tracheal resection due to excessive tension at the anastomosis site. In such cases, tracheal replacement therapy is required. Advances in tissue engineering technology have led to the development of tissue engineering tracheal substitutes, which have promising applications. Hydrogels, which are highly hydrated and possess a good three-dimensional network structure, biocompatibility, low immunogenicity, biodegradability, and modifiability, have had wide applications in the field of tissue engineering. This article provides a review of the characteristics, advantages, disadvantages, and effects of various hydrogels commonly used in tissue engineering trachea in recent years. Additionally, the article discusses and offers prospects for the future application of hydrogels in the field of tissue engineering trachea.

A 32-year-old female patient experienced a foreign body sensation in her esophagus on the evening of September 22, 2024, after consuming undercooked grass carp at a restaurant in Wuhan. Esophagoscopy conducted at the hospital revealed no abnormalities. Three days later, she had a stabbing pain in the pharynx. On October 8, upon self-examination, she noticed a red brown worm exhibiting stretching and contracting movements attached near the uvula in her pharynx and then went to the hospital. During the removal of the worm, the doctor observed the ulcers on the mucous membrane. Serological antibody tests for seven common human parasitic worms, including Schistosoma japonicum, Paragonimus westermani, Clonorchis sinensis, cysticercus of Taenia solium, sparganum, hydatid cyst, and Trichinella spiralis, were all negative. The isolated worm was reddish brown, measuring 4 mm in length and 2 mm in width. Staining with hydrochloric carmine dye revealed a morphology consistent with Clinostomum complanatum (Rud., 1819), characterized by an oral sucker at the anterior end, a pharynx connecting to intestinal branches, and two intestinal branches extending to the posterior end of the body with small sub-branches. The ventral sucker, larger than the oral sucker, was located at the front 1/4 of the body. A pair of testes were arranged longitudinally in the mid-posterior part, with an ovary located between the two testes and a uterus located above the upper testis. A comprehensive search of 188 databases comprising more than 460 million full-text articles through the library of Huazhong University of Science and Technology confirmed the first reported case of Clinostomum complanatum infection in humans in China.

Objective To explore the relationship between osteoporosis and carotid atherosclerosis in patients with coronary heart disease aged≥60 years and analyze prevention suggestions. Methods The clinical data of 380 patients with coronary heart disease aged≥60 years who underwent various examinations in the hospital between April 2024 and April 2025 were retrospectively analyzed. According to the bone mineral density (BMD) classification criteria, the patients were divided into osteoporosis group and non-osteoporosis group. The differences in general data and carotid atherosclerosis-related indicators were compared between osteoporosis group and non-osteoporosis group. Pearson method was used to analyze the correlation between carotid atherosclerosis indicators and clinical indicators in patients with coronary heart disease aged≥60 years. According to the IMT detection thickness in patients with coronary heart disease and osteoporosis aged≥60 years were divided into IMT thickening group and IMT non-thickening group and between plaque group and non-plaque group, and the differences in BMD and bone metabolism indicators were compared. Binary logistics analysis was adopted to analyze the risk factors of IMT thickening and carotid plaque formation in patients with coronary heart disease≥60 years old. Results Age and duration of osteoporosis group TC、LDL-C、CTX、 Carotid artery IMT and carotid atherosclerosis degree were higher than those in the non osteoporosis group, the difference was statistically significant (P<0.05). BMI, OPG, OCN, 25 (OH) D, BMD, carotid artery elasticity coefficient were lower than those in the non osteoporosis group, the difference was statistically significant (P<0.05). Carotid IMT, carotid atherosclerosis degree, and carotid elasticity coefficient were significantly correlated with age, course of disease, TC, LDL-C, CTX, BMI, OPG, OCN, BMD, and 25 (OH) D of coronary heart disease patients ≥60 years old (P<0.05). OPG, OCN, BMD and 25(OH)D in IMT thickening group and plaque group were lower compared to IMT non-thickening group and non-plaque group (P<0.05) while CTX was significantly higher than that in IMT non-thickening group and non-plaque group (P<0.05). Binary logistics regression analysis showed that OPG, OCN, BMD, 25(OH)D and CTX were associated with IMT thickening in patients with coronary heart disease and osteoporosis aged≥60 years (P<0.05). OPG, OCN and BMD were associated with carotid plaque formation in patients with coronary heart disease complicated with osteoporosis aged≥60 years (P<0.05). Conclusion There is a significant correlation between osteoporosis and arteriosclerosis in patients with coronary heart disease aged≥60 years. As the bone mass decreases, the manifestations of arteriosclerosis become become more and more obvious, which needs attention and prevention.

Humans ; Aged ; Lung Diseases ; Pneumonia/drug therapy* ; Adrenal Cortex Hormones/therapeutic use* ; Pulmonary Disease, Chronic Obstructive/drug therapy* ; Administration, Inhalation ; Community-Acquired Infections/drug therapy*

Inflammasome is a kind of intracellular polyprotein complex,which is an important component of the complex system of local inflammatory microenvironment after human tissue damage.When the inflammasome is activated,it induces the activation of cysteine aspartate proteinase 1(caspase-1),mediates the maturation and secretion of proinflammatory cytokines,such as interleukin(IL)-1 β and IL-18,and induces cell death,which plays an important role in regulating the host immune response to pathogen infection and tissue repair of cell damage.Nod-like receptor protein 3(NLRP3)inflammatory body,which is composed of NLRP3,pro-cysteine aspartic acid specific protease-1(pro-caspase-1)and apoptosis-related spot-like protein(ASC),is the most deeply and widely studied type of inflammatory body,which plays an important role in the regulation of inflammation.When NLRP3 inflammatory bodies are activated,inflammatory mediators are produced and released,which participate in the occurrence and development of a variety of inflammatory diseases.Some studies have shown that traditional Chinese medicine can improve the pathological state of a variety of diseases by inhibiting NLRP3 inflammatory bodies,and play a role in the prevention and treatment of a variety of inflammatory diseases,including cardiovascular diseases,joint inflammation,diabetes and so on.This paper systematically combs the mechanism of NLRP3 inflammatory bodies,and summarizes the latest research reports on the effects of traditional Chinese medicine compound prescription,traditional Chinese medicine monomers and traditional Chinese medicine extracts on NLRP3 inflammatory bodies in the treatment of inflammatory diseases,in order to provide new ideas for the further study of the pathogenesis and drug treatment of many inflammatory diseases.