ObjectiveThis paper aims to observe the syndrome improvement and negative antigen conversion rate of Qingxuan Daozhi formula in the treatment of influenza in children （heat accumulation in the lung and stomach syndrome）. MethodsThrough a multi-center randomized controlled methodology design，confirmed influenza cases were collected from October 2022 to April 2023 in the pediatrics department of eight hospitals，such as Dongfang Hospital of Beijing University of Chinese Medicine. A total of 180 children with influenza and heat accumulation in the lung and stomach syndrome conforming to the standard were recruited through the clinic. The sick children meeting the inclusion criteria were randomly divided into groups by a block-randomized method. The children in the experimental group were treated with Qingxuan Daozhi formula for five days，and those in the control group were treated with Oseltamivir Phosphate Granules for five days. The primary efficacy indicator was the negative conversion rate of influenza antigen detection. Secondary efficacy indicators were the Canadian acute respiratory illness and flu scale （CARIFS） and the incidence of complications，severe cases， and critical cases. Follow-up observation was conducted on the day of enrollment，48 hours after medication，72 hours after medication， and （6+1） d after medication. ResultsOne hundred and eighty participants were randomly assigned to the experimental group （90 cases） or the control group （90 cases）. All participants were followed up during the study. Comparison of influenza antigen detection results in the primary efficacy indicators showed that the average time of negative influenza antigen conversion in the experimental group was （5.29±1.25） d，and that in the control group was （5.40±1.68） d，without a statistically significant difference. After five days of intervention，52 cases in the experimental group and 51 cases in the control group converted to negative，without a statistically significant difference. CARIFS score results in the secondary efficacy indicators showed that during 72 hours after intervention，there were statistically significant differences between the experimental group and the control group in three dimensions， including headache，muscle soreness， and the need for extra care （P<0.05）. On the （6+1） days after the intervention，the differences in both the experimental group and the control group were statistically significant in 10 dimensions， including sore throat，bad sleep，uncomfortable feeling，poor spirit and fatigue，crying more than usual，the need for extra care，symptom，function，influence on parents，and total score （P<0.05）. The comparison results within the group in the dimensional scores of symptom， function， and influence on parents，as well as the CARIFS total score showed that with the delay of follow-up time，scores of both groups decreased significantly，with a statistically significant difference （P<0.01）. Inter-group comparison results showed that the mean score of the experimental group was higher than that of the control group at the time of enrollment. With the progress of intervention，the score of the experimental group was significantly decreased compared with that of the control group. At the end of follow-up，the mean score of the experimental group was lower than that of the control group，with no statistically significant difference. In terms of the incidence of complications，severe cases， and critical cases， there were no complications，severe cases， and critical cases in the two groups，without a statistically significant difference. ConclusionThe symptom improvement effect and negative antigen conversion rate of Qingxuan Daozhi formula in the treatment of influenza in children （heat accumulation in the lung and stomach syndrome） are not inferior to Oseltamivir Phosphate granules， and children's acceptance is better. It can be more widely used in clinical treatment of influenza in children （heat accumulation in the lung and stomach syndrome）.

ObjectiveBased on the regulation of macrophage M2 polarization， this study aims to explore the molecular mechanism and action targets of the Qijia Rougan prescription and its key effector ingredients in anti-fibrosis， thereby providing a basis and reference for the development of new drugs for hepatic fibrosis. MethodsA rat model of hepatic fibrosis was established by subcutaneous injection of 40%CCl₄， followed by oral administration of Qijia Rougan granules. The volume of collagen fibers was detected using Masson staining， the fibrosis markers Collagen Ⅰ and α-SMA were detected using immunohistochemistry， the proportion of M2 macrophages was detected by flow cytometry. The expression levels of M2 macrophage phenotype markers CD163 and CD206 were detected using immunofluorescence double staining. Western blot was used to detect the levels of the transforming growth factor-β （TGF-β）， platelet derived growth factor subunit B （PDGFB）， interleukin-10 （IL-10）， phosphorylated Janus kinase 1 （p-JAK1）， and phosphorylated signal transducer and activator of transcription 6 （p-STAT6）. Real-time fluorescent quantitative PCR was used to detect the relative expression levels of JAK1， STAT6， Arginase 1（Arg1）， and Fizz1. Based on the theory of serum pharmacology， liquid chromatography-mass spectrometry and WENN analysis were used to obtain the active ingredients of Qijia Rougan prescription. Molecular docking and molecular dynamics simulation were performed to analyze the effector ingredients and their targets. The identified effector ingredients were interfered with IL-4-induced M2 polarization of RAW264.7 macrophage in vitro to validate the targets. ResultsQijia Rougan prescription significantly reduced the content of fibrosis markers α-SMA and Collagen Ⅰ， as well as collagen fiber content （P<0.05）. It decreased the proportion of M2 macrophages and the levels of related cytokines IL-10， TGF-β and PDGFB， and up-regulated the levels of p-JAK1 and p-STAT6 （P<0.05）. A total of 1 214 compounds were identified from Qijia Rougan prescription， medicated serum and blank serum， and 29 ingredients were finalized by Venn analysis， including 15 blood-entry prototypes and 14 drug metabolites. Molecular docking showed that enoxolone and berberine bound more strongly to JAK1， with binding free energies of -9.6 kcal·mol^-1（1 cal≈4.184 J） and -9.1 kcal·mol^-1， respectively. Molecular dynamics simulations showed that JAK1-enoxolone and JAK1-berberine exhibited stable simulation trajectories within 100 ns， with essentially identical conformations and high protein overlap before and after simulation. Their binding free energies were -25.18 5.0.81 kcal·mol^-1 and -27.39 7.0.85 kcal·mol^-1， respectively. The number of hydrogen bonds formed between JAK1 and enoxolone ranges from 0 to 5， and most of the time can be maintained at 2-3. In vitro intervention with enoxolone or berberine significantly reduced p-JAK1 and p-STAT6 levels （P<0.05）. ConclusionQijia Rougan prescription inhibits M2 macrophage polarization in hepatic fibrosis. Enoxolone and berberine are the key effector ingredients of Qijia Rougan prescription to inhibit macrophage M2 polarization through targeting JAK1 and modulating the JAK1/STAT6 signaling pathway， thereby ameliorating hepatic fibrosis. This study provides a basis for prescription optimization， clinical application and new drug development， as well as a reference for monolithic anti-hepatic fibrosis research.

Exercise-induced muscle damage (EIMD) is a frequent form of skeletal muscle microdamage that occurs after high-intensity, prolonged, or unaccustomed exercise, especially exercise dominated by eccentric contractions. It is commonly characterized by delayed-onset muscle soreness, transient loss of muscle strength, local inflammation, structural disruption of myofibers, and delayed functional recovery. Although mild EIMD may serve as a stimulus for training adaptation, excessive or insufficiently recovered muscle damage can impair exercise performance, disturb training continuity, and reduce participation in physical activity. Therefore, clarifying the molecular mechanisms that underlie the initiation, amplification, and resolution of EIMD is important for optimizing athletic training, improving post-exercise recovery, and guiding evidence-based public fitness practice. Necroptosis is a regulated form of programmed cell death mediated primarily by the receptor-interacting protein kinase (RIPK) 1/RIPK3/mixed lineage kinase domain-like protein (MLKL) signaling axis. Recent studies have shown that necroptosis is closely involved in tissue injury, sterile inflammation, and repair remodeling. However, whether necroptosis acts as an initiating driver, a secondary damage amplifier, or an adaptive signal required for repair after EIMD remains unclear. This review aimed to summarize the potential role of necroptosis in EIMD and to establish a mechanistic framework linking regulated cell death, inflammatory amplification, immune regulation, and skeletal muscle repair. Relevant studies concerning EIMD, necroptosis, RIPK1/RIPK3/MLKL signaling, damage-associated molecular patterns (DAMPs), inflammatory responses, immune cell recruitment, extracellular matrix remodeling, and muscle regeneration were reviewed and integrated. On this basis, the possible temporal and functional involvement of necroptosis in different phases of EIMD was analyzed. The main evidence summarized in this review suggests that EIMD is not merely a consequence of primary mechanical disruption. Instead, it develops through a dynamic sequence that includes sarcolemmal instability, calcium overload, mitochondrial dysfunction, oxidative stress, inflammatory mediator production, immune cell infiltration, necrotic tissue clearance, and regeneration-associated remodeling. Necroptosis may participate in this process through at least two interconnected mechanisms. First, in the early or progressive phase of EIMD, activation of the RIPK1/RIPK3/MLKL signaling axis may promote MLKL phosphorylation and plasma membrane permeabilization, leading to the release of DAMPs such as high-mobility group box 1, ATP, mitochondrial DNA, and other intracellular components. These signals may activate innate immune pathways, amplify inflammatory cytokine production, and enhance the recruitment of neutrophils and macrophages, thereby aggravating secondary inflammation and extending muscle fiber injury. Second, during the resolution and repair phases, necroptosis-related signaling may also contribute indirectly to the formation of a regenerative microenvironment. By influencing the clearance of necrotic debris, the recruitment and phenotypic transition of immune cells, and the remodeling of extracellular matrix components, necroptosis may affect satellite cell activation, myogenic repair, and the eventual structural and functional recovery of injured skeletal muscle. Thus, the biological effect of necroptosis in EIMD may be context dependent rather than uniformly harmful. Its outcome may depend on exercise intensity, the extent of tissue damage, the timing of pathway activation, the involved cell types, inflammatory status, training background, age, and metabolic condition. In conclusion, necroptosis may represent an important molecular link between skeletal muscle injury, sterile inflammation, and tissue repair after damaging exercise. It may exert a dual role in EIMD by amplifying secondary damage while also contributing to repair coordination under appropriate temporal and microenvironmental conditions. Future studies should determine the activation pattern of RIPK1/RIPK3/MLKL signaling after different exercise protocols, identify the major cell populations undergoing necroptosis in injured skeletal muscle, and examine whether targeted modulation of necroptosis can reduce excessive inflammation without impairing necessary regenerative responses. This review provides a theoretical basis for understanding the pathogenesis of EIMD and for developing targeted strategies to improve skeletal muscle recovery after exercise-induced injury.

[Objective] To explore the influencing factors of quality monitoring index on the nucleic acid pooling detection mode and continuously improve the detection quality of nucleic acid laboratory. [Methods] The quality monitoring indicators (NAT reactive rate, NAT resolution reactive rate, NAT invalid batch rate, NAT invalid result rate, equipment failure rate) and causes of invalidity in our laboratory from January 1, 2020 to December 31, 2022 were retrospectively analyzed. The quality monitoring indicators of the laboratory during 2020 to 2022 were compared longitudinally. The quality monitoring indicators of the laboratory in 2022 were compared horizontally with the overall level in Shandong for the same period to find the differences. [Results] From 2020 to 2022, a total of 218 686 samples were detected, the NAT reactive rate was 0.15‰ (32 samples in total), the resolution reactive rate was 39.02%, the invalid batch rate was 1.06%, the invalid result rate was 1.18%, and the equipment failure rate was 3.58%. There were no differences in the NAT reactive rate, NAT resolution reactive rate and NAT invalid batch rate among different years (P>0.05), but there were differences in the invalid result rate (P<0.05). Equipment failure was the main cause of invalid results (56.53%). Compared with other laboratories in Shandong, there were differences in the NAT reactive rate and invalid result rate (P<0.05). There were differences in the reaction rate, resolution rate and invalid result rate among different reagents (P<0.05). Compared with other two laboratories using the same manufacturer's reagent, there were differences in the reactive rate and invalid result rate (P<0.05), but no difference in the resolution rate and invalid batch rate (P>0.05). [Conclusion] Establishing quality indexes for process control and regular analysis can timely detect potential risks in laboratory operation. The use of quality indicators to implement self-comparison and inter-laboratory comparison can help the laboratory systematically and scientifically evaluate its own operating status and formulate corresponding quality management strategies, thereby improving the laboratory's testing capacity and ensure the safety of blood use.

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

OBJECTIVE: To explore the current research status and hotspots in the field of biomechanics of diabetic foot by bibliometric analysis methods. METHODS: Literatures related to biomechanics of diabetic foot published in the Web of Scienc Core Collection (WoSCC) from 1981 to 2024 were searched. CiteSpace software and R language bibliometrics plugin were used to conduct a visual analysis of annual publication volume of the literature, including publication volume of each country and region, the publication situation of authors and institutions, the citation situation of individual literature, and the co-occurrence network of keywords. RESULTS: Totally 996 literatures were included, and the number of published papers increased steadily. The United States (261 papers) and China (89 papers) were the top two countries in terms of the number of published papers. The mediating centrality of the United States was 0.94, and that of China was 0.01. Scholars such as Cavanagh and institutions like the Cleveland Clinic were at the core of research in this field. High-frequency keywords include plantar pressure (plantar pressure), diabetic foot (diabetic foot), ulceration (ulcer), etc. The research focuses on plantar pressure, ulcer formation and prevention, etc. CONCLUSION Biomechanical research on diabetic foot mainly focuses on the pressure distribution on the sole of the foot, callus formation, mechanical analysis of soft tissues on the sole of the foot, and the study of plantar decompression caused by Achilles tendon elongation. The research trend has gradually shifted from focusing on joint range of motion to gait and the design of braces and assistive devices, and has begun to pay attention to muscle strength, gait imbalance and proprioception abnormalities.
Humans ; Diabetic Foot/physiopathology* ; Biomechanical Phenomena ; Bibliometrics

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

Compounds isolated from Epimedium include the total flavonoids of Epimedium , icariin, and its metabolites (icaritin, icariside I, and icariside II), which have similar molecular structures. Modern pharmacological research and clinical practice have proved that Epimedium and its active components have a wide range of pharmacological effects, especially in improving sexual function, hormone regulation, anti-osteoporosis, immune function regulation, anti-oxidation, and anti-tumor activity. To date, we still need a comprehensive source of knowledge about the pharmacological effects of Epimedium and its bioactive compounds on the male reproductive system. However, their actions in other tissues have been reviewed in recent years. This review critically focuses on the Epimedium , its bioactive compounds, and the biochemical and molecular mechanisms that modulate vital pathways associated with the male reproductive system. Such intrinsic knowledge will significantly further studies on the Epimedium and its bioactive compounds that protect the male reproductive system and provide some guidances for clinical treatment of related male reproductive disorders.
Male ; Epimedium/chemistry* ; Humans ; Genitalia, Male/drug effects* ; Flavonoids/therapeutic use* ; Animals

We propose a strategy to reduce unnecessary prostate biopsies in Chinese patients with total prostate-specific antigen (tPSA) >10 ng ml -1 and Prostate Imaging Reporting and Data System (PI-RADS) scores between 1 and 3. Clinical data derived from 517 patients of The First Affiliated Hospital of USTC (Hefei, China) from January 2020 to December 2023 who met the screening criteria for the study were retrospectively collected. Independent predictors were identified via univariate and multivariate logistic regression analysis. The diagnostic capacity of clinical variables was evaluated using the receiver operating characteristic (ROC) curves and area under the curve (AUC). A prostate biopsy strategy was developed via risk stratification. Of the 517 patients, 17/348 (4.9%) with PI-RADS 1-2 were diagnosed with clinically significant prostate cancer (csPCa), and 27/169 (16.0%) patients with PI-RADS 3 were diagnosed with csPCa. The appropriate prostate-specific antigen density (PSAD) cut-off values were 0.45 ng ml -2 for PI-RADS 1-2 patients and 0.3 ng ml -2 for PI-RADS 3 patients. The appropriate prostate volume (PV) cut-off values were 40 ml for PI-RADS 1-2 patients and 50 ml for PI-RADS 3 patients. The prostate biopsy strategy based on PSAD and PV developed in this study can reduce unnecessary prostate biopsies in patients with tPSA >10 ng ml -1 and PI-RADS 1-3. In the study, 66.5% (344/517) patients did not need to undergo prostate biopsy, at the expense of missing only 1.7% (6/344) patients with csPCa.
Humans ; Male ; Prostatic Neoplasms/diagnostic imaging* ; Prostate-Specific Antigen/blood* ; Aged ; Middle Aged ; Retrospective Studies ; Prostate/diagnostic imaging* ; Unnecessary Procedures/statistics & numerical data* ; Biopsy/statistics & numerical data* ; China ; ROC Curve

OBJECTIVES: To explore the application of the colloidal gold method and chemiluminescence method in detecting gonadotropin (Gn) in morning urine for assessing pubertal development status in children. METHODS: A total of 132 children diagnosed with central precocious puberty (CPP), early and fast puberty (EFP), and premature thelarche (PT) at Ruijin Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from November 2021 to December 2022 were included, along with 685 healthy children who underwent routine health examinations at the hospital's pediatric health care department during the same period. All 132 patients underwent a gonadotropin-releasing hormone (GnRH) stimulation test. Both patients and healthy children had their urinary Gn levels measured using the colloidal gold method and chemiluminescence method, including levels of luteinizing hormone (LH) and follicle-stimulating hormone (FSH). The correlation between serum Gn and urinary Gn detected by the two methods, as well as the correlation between Tanner stages of healthy children and urinary Gn, was analyzed. RESULTS: Urine Gn levels detected by both the colloidal gold method and chemiluminescence method showed a positive correlation with serum LH baseline values, LH peak values, baseline LH/FSH ratios, and peak LH/FSH ratios (P<0.05). In healthy children, urinary LH levels detected by the chemiluminescence method gradually increased from Tanner stage Ⅰ to Ⅳ (P<0.05), while urinary FSH levels were lower in Tanner stage I than in stages Ⅱ, Ⅲ, and IV (P<0.05). Urinary LH levels detected by the colloidal gold method were lower in Tanner stage I compared to stages Ⅱ, Ⅲ, and IV, with the highest levels observed in Tanner stage Ⅳ (P<0.05). Additionally, urinary FSH levels in Tanner stage Ⅲ were higher than in stages Ⅰ and Ⅱ (P<0.05). The area under the receiver operating characteristic curve for evaluating Tanner stages I and II in healthy children using urinary LH and FSH levels by the chemiluminescence method and urinary LH levels by the colloidal gold method were 0.730, 0.699, and 0.783, respectively. CONCLUSIONS The colloidal gold method and chemiluminescence method for detecting Gn in morning urine show good correlation with serum Gn levels. As a non-invasive and convenient detection method, the colloidal gold method can serve as a useful tool for screening the onset of pubertal development in children.
Humans ; Child ; Male ; Female ; Gold Colloid ; Luminescent Measurements/methods* ; Gonadotropins/urine* ; Puberty ; Luteinizing Hormone/urine* ; Child, Preschool ; Adolescent ; Follicle Stimulating Hormone/urine*