ObjectiveTo improve the accuracy of discrete element method in simulating the processing of traditional Chinese medicine（TCM） powder system under low shear conditions. MethodsIn this study， extract powders of Tongsaimai tablets and Qige granules were used as the research objects， the angle of repose（AOR） and effective angle of internal friction of the two materials were determined by AOR test method and shear cell test method. Based on the Hertz-Mindlin with JKR V2 contact model and particle scaling theory， taking the particle-particle restitution coefficient（A）， particle-particle static friction coefficient（B）， particle-particle rolling friction coefficient（C）， particle-steel restitution coefficient（D）， particle-steel static friction coefficient（E）， particle-steel rolling friction coefficient（F） and Johnson-Kendall-Roberts（JKR） surface energy（G） as test factors， the simulated contact parameters of Tongsaimai tablets extract powder were first calibrated with a single reference value using AOR as the reference value， and then the simulated contact parameters of Tongsaimai tablets extract powder as well as Qige granules extract powder were co-calibrated with AOR and effective angle of internal friction as the joint reference value， respectively. Then， Plackett-Burman design was used to screen the critical contact parameters that have a significant effect on the simulated reference value， and the steepest ascent design was used to determine the optimal range of the critical contact parameters， finally， the regression model between the critical contact parameters and the simulated reference values was established through the design of the response surface test， and the critical contact parameters were calibrated based on the regression model and the desirability function approach. ResultsThe optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder under a single reference value was 0.100， 0.718， 0.616， 0.100， 0.400， 0.250 and 0.075 J·m^-2， which was validated to have relative errors of 0.10% and -8.64% for the simulated AOR and the simulated effective angle of internal friction， respectively. And the optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder at the joint reference values was 0.100， 0.682， 0.598， 0.100， 0.521， 0.294 and 0.075 J·m^-2， which was verified to have relative errors of 0.10% and -0.18% for the simulated AOR and the simulated effective angle of internal friction， respectively. The optimal combination of discrete elemental contact parameters A-G for Qige granules extract powder at the joint reference values was 0.150， 0.370， 0.330， 0.150， 0.500， 0.500 and 0.100 J·m^-2， which was verified to have relative errors of 2.70% and -1.30% for the simulated AOR and the simulated effective angle of internal friction， respectively. Compared with the single reference value method， the joint calibration method not only increased the number of the critical contact parameters for characterizing particle-device interactions， but also was more accurate and reliable. ConclusionCompared with the results of single reference value calibration， the results obtained by the method of joint calibration of discrete element simulation contact parameters with AOR and effective angle of internal friction as the reference values are more accurate， which can provide more accurate and reliable simulation physical property data for the simulation experiments of TCM extract powder under low shear process conditions.

AIM: To evaluate the safety and efficacy of allogeneic intrastromal lenticule implantation combined with corneal collagen cross-linking(CXL)in patients with moderate to advanced keratoconus.METHODS: A retrospective case series analysis was conducted. A total of 19 patients(20 eyes)with moderate to advanced keratoconus who underwent combined allogeneic intrastromal lenticule implantation and CXL at the Jinan Mingshui Eye Hospital from June 2021 to December 2023 were included. The uncorrected distance visual acuity(UCVA), thinnest corneal thickness, central corneal epithelial thickness, anterior corneal flat keratometry(Kf), steep keratometry(Ks), and mean keratometry(Km), as well as the first applanation time(A1T), the first applanation length(A1L), the velocity during the first applanation moment(VIN), the second applanation time(A2T), the second applanation length(A2L), the velocity during the second applanation moment(VOUT), highest concavity time(HCT), highest concavity radius(HCR), peak distance(PD), deformation amplitude(DA), stiffness parameter at first applanation(SP-A1), integrated radius(IR), central corneal thickness(CCT), intraocular pressure(IOP), corneal thickness-corrected IOP, biomechanically intraocular pressure IOP(bIOP), and corneal thickness variation rate(ARTH)were compared between the two groups before surgery and at 1 wk, 1, 3 and 6 mo after surgery.RESULTS: All patients successfully completed the surgery without any intraoperative complications. No significant differences were observed between pre-operative and post-operative measurements for UCVA or the corneal biomechanical parameters, including A1L, A2L, PD, A1T, A2T, VIN, VOUT, DA, IOP, and bIOP(all P>0.05). Significant differences were found between pre-operative and post-operative values for corneal thinnest point thickness, central corneal epithelial thickness, Kf, Ks, Km, and the corneal biomechanical parameters, including HCT, HCR, SP-A1, ARTH, IR, and CCT(all P<0.05). The anterior corneal curvature demonstrated an initial increase followed by a decrease post-operatively. Furthermore, significant differences were observed between pre-operative and post-operative values for HCT, HCR, SP-A1, ARTH, IR, and CCT(all P<0.005).CONCLUSION: Allogenic intrastromal lenticule implantation combined with corneal collagen cross-linking demonstrates favorable safety and stability in treating moderate-to-advanced keratoconus. This combined procedure effectively increases corneal thickness and rigidity, resulting in corneas that are more resistant to deformation postoperatively.

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

ObjectiveTo construct and validate a clinical prediction model for diabetic kidney disease （DKD） based on optical coherence tomography angiography （OCTA）. MethodsThis study enrolled 567 diabetes patients. The random forest algorithm as well as logistic regression analysis were applied to construct the prediction model. The model discrimination and clinical usefulness were evaluated by receiver operating characteristic curve （ROC） and decision curve analysis （DCA）， respectively. ResultsThe clinical prediction model for DKD based on OCTA was constructed with area under the curve （AUC） of 0.878 and Brier score of 0.11. ConclusionsThrough multidimensional verification， the clinical prediction nomogram model based on OCTA allowed for early warning and advanced intervention of DKD.

Objective:To evaluate the reliability and validity of the Chinese version of HEMO-FISS-QoL(HF-QoL) questionnaire (HF-QoL-C) in the Chinese population with hemorrhoids.Methods:From November 2021 to November 2022, a self-constructed general information questionnaire, HF-QoL-C, and the 36-item short form health survey (SF-36), Goligher classification, and Giordano severity of hemorrhoid symptom questionnaire (GSQ) were used to conduct a questionnaire survey on 760 hemorrhoid patients in the anorectal department of six hospitals. The data was analyzed for reliability and validity using SPSS 21.0 and AMOS 26.0 software.Results:The Cronbach's α coefficient of HF-QoL-C and its dimension ranged from 0.831 to 0.960, and the split coefficient was 0.832-0.915. Four common factors were extracted through principal component exploratory factor analysis. Confirmatory factor analysis indicated acceptable structural validity( χ2/ df=8.152, RSMEA=0.097, CFI=0.881, IFI=0.881, NFI=0.867). HF-QoL-C was correlated with SF36 and GSQ( r=-0.694, 0.501, both P<0.01). There were differences in the total score and dimensional scores of HF-QoL-C between surgical and drug treated patients, different grades of Goligher classification for hemorrhoidal disease, and different ranges of hemorrhoid prolapse (all P<0.001). No ceiling effect was found in the total score and the scores of each dimension(0.3%-2.0%). There was a floor effect in both psychological function and sexual activity dimensions (16.7%, 35.1%). Conclusion:HF-QoL-C has good reliability and validity, which can be used to measure the quality of life of Chinese hemorrhoid patients.

Objective To investigate the predictive value of systemic immune-inflammation index(SII)and N-terminal pro-brain natriuretic peptide(NT-proBNP)level in elderly patients with acute ST-segment elevation myocardial infarction(STEMI)developing contrast-induced acute kidney injury(CIAKI)after PCI.Methods A total of 1085 elderly STEMI patients undergoing emergency PCI in the Affiliated Hospital of Xuzhou Medical University from January 2018 to March 2023 were consecutively recruited as a training set,and another 287 elderly STEMI pa-tients receiving emergency PCI in the East Branch of the Affiliated Hospital from January 2021 to June 2023 were included as a verification set.According to the diagnostic criteria of CIAKI,they were divided into CIAKI group(n=95)and non-CIAKI group(n=990).Based on the results of restricted cubic spline(RCS)analysis,the patients from the training set were assigned into low-risk subgroup(n=292),moderate-risk group(n=515)and high-risk group(n=278).Multivari-ate logistic regression analysis was used to analyze the independent risk factors of CIAKI in elder-ly STEMI patients after PCI,and ROC curve was plotted to analyze the predictive value of combi-nation of SII and NT-proBNP.The risk of CIAKI was compared among the patients at different risk grades.Results Age,SII,baseline serum creatinine,NT-proBNP,fasting blood glucose and use of diuretics were independent risk factors for CIAKI after primary PCI in elderly STEMI patients(P＜0.05,P＜0.01).The AUC value of SII combined with NT-proBNP in predicting CIAKI was 0.801(95％CI:0.761-0.842,P＜0.01),with a sensitivity of 83.2％and a specificity of 67.5％,both superior to that of SII or NT-proBNP alone.RCS analysis revealed an increased risk of CIAKI at SII ≥1084.97 × 109/L and NT-proBNP ≥296.12 ng/L.The incidence of CIAKI was increased with the increase of risk grades(1.71％vs 6.41％vs 20.50％).Conclusion SII and NT-proBNP are independent risk factors for CIAKI after emergency PCI in elderly STEMI pa-tients.And their combination has better predictive value for CIAKI.

The quality control during the manufacturing process of traditional Chinese medicine TCM)is paramount to ensuring the quality of the final product.However,the sheer diversity of TCM ingredients and the intricacies of the production process pose sig-nificant challenges to achieving precise quality control.The review introduced an intelligent control concept centered on functional sub-stances in TCM quality,which comprehensively explained the scientific essence of TCM quality,and provided a theoretical foundation for determining"what to control"and"how to control"within the complex system of TCM components.Furthermore,through the ad-vanced informatization,digitization,and intelligent technologies,our team has conducted extensive research and construction practices on the intelligent transformation and digital upgrade of traditional Chinese medicine TCM)manufacturing processes.Ultimately,the establishment of a quality control system tailored specifically for TCM manufacturing with functional substances serving as the primary quality target,which presented an opportunity to solve the difficult problem of process quality control in TCM manufacturing.

Objective By knocking down the expression of fibroblast growth factors 21(FGF21)in adipose liver cells,to observe lipid metabolism and to explore the molecular mechanism of FGF21 regulating lipid metabolism in liver cells.Methods By interfering with lentivirus transfection through FGF21,the expression of FGF21 was reduced in HepG2 cells.HepG2 cells were transfected with an empty vector as a control,and were respectively referred to as interference group and control group.Both groups were stimulated with palmitic acid oleic acid to construct non-alcoholic fatty liver disease(NAFLD)cell model.The expression of FGF21 was interfered by lentivirus vector,oil red O staining and spectrophotometric value were measured to observe the lipid deposition in cells.Use Western blot method to detect the changes of suppressor of cytokine signaling 3(SOCS3),JAK2,and STAT3 proteins in fatty liver cells.Results Oil red O staining and absorbance values showed that compared with control group,interference group significantly reduced the lipid droplet content in liver cells;Western blot results showed that the expression levels of suppressor of cytokine signaling 3(SOCS3),Janus kinase 2(JAK2),signal transducer and activator of transcription 3(STAT3),and STAT3 protein were significantly increased in interference group of liver cells.Conclusion In the fatty liver cell model,knocking down FGF21 can improve lipid deposition through liver cells.The mechanism may be through increasing the SOCS3/JAK/STAT pathway,but the specific mechanism of action needs further in-depth research in the future.

Objective: To investigate the mortality, probability of premature death and trends due to malignant tumors, cardio-cerebrovascular diseases, diabetes and chronic respiratory diseases in Xiaoshan District, Hangzhou City from 2015 to 2021, so as to provide the basis for the formulation of chronic diseases prevention and control strategies. Methods: The deaths of the four diseases in Xiaoshan District from 2015 to 2021 were collected from Zhejiang Provincial Chronic Diseases Surveillance Information Management System. The crude mortality, standardized mortality and probability of premature death were calculated. The trends in mortality and probability of premature death were analyzed using average annual percent change (AAPC), and the attainment of probability of premature death due to the four diseases was evaluated using the targets of probability of premature death control in 2025 and 2030. Results: Totally 36 130 deaths due to the four diseases were reported in Xiaoshan District from 2015 to 2021. The crude mortality and standardized mortality were 445.20/105 and 237.81/105, which appeared a tendency towards a decline (AAPC=-1.427% and -4.051%, both P<0.05), and the probability of premature death decreased from 9.99% to 7.82%, (AAPC=-4.123%, P<0.05). The standardized mortality of malignant tumors, cardio-cerebrovascular diseases and chronic respiratory diseases appeared a tendency towards a decline (AAPC=-3.017%, -4.999%, and -6.024%, all P<0.05), while there was no significant trend in the standardized mortality of diabetes (AAPC=-0.847%, P>0.05). The probability of premature death due to malignant tumors appeared a tendency towards a decline (AAPC=-4.167%, P<0.05), while there was no significant trends seen in the probability of premature death due to diabetes, cardio-cerebrovascular diseases and chronic respiratory diseases (AAPC=0.638%, -5.250% and -2.022%, all P>0.05). The average probability of premature death due to the four diseases decreased by 4.00% each year, and decreased by 6.64% in 2025 and 5.42% in 2030 as predicted, which were both lower than the target values of 7.99% and 6.99%. Conclusions The mortality and probability of premature death due to the four diseases appeared a tendency towards a decline in Xiaoshan District from 2015 to 2021, with the probability of premature death of malignant tumors decreased significantly. It is predicted that the probability of premature death of the four diseases can reach the target in 2025 and 2030.

【Objective】 To analyze nutrition-related factors that affect the prevalence of myopia in adolescents, in order to provide reference for primary prevention of myopia. 【Methods】 A stratified sampling method was used to select 385 adolescents from Zhengding County in October 2021. Adolescents in this study took vision testing, physical examination and completed a questionnaire survey. One-way analysis of variance and lasso regression were used to screen the variables, and Logistic regression was used to determine the possible influencing factors of myopia. Factor analysis was adopted to extract the dietary patterns of adolescents in Zhengding County, then the association between dietary patterns and myopia was analyzed. 【Results】 A total of 385 adolescents were surveyed, with the prevalence rate of myopia of about 68.6%. Multivariate analysis revealed that fried food(OR=8.480, 95%CI:1.058 - 67.971) was a risk factor for myopia, while intake of milk and dairy products(OR=0.994, 95%CI:0.991 - 0.999), soybeans and nuts(OR=0.997, 95%CI:0.994 - 0.999), no myopia in either parent(OR=0.312, 95%CI:0.115 - 0.845), physical education class 4 times per week(OR=0.269, 95%CI:0.074 - 0.984) were statistically associated with a lower risk of myopia(P<0.05). Three dietary patterns was extracted through factor analysis, including diversified dietary pattern, soy-hybrid dietary pattern, and snack and beverage dietary pattern. Logistic analysis results indicated that soy-hybrid dietary pattern(OR=0.85, 95%CI:0.73 - 0.99,P<0.05) was statistically associated with myopia. 【Conclusions】 The problem of myopia among adolescents in Zhengding County is more serious. Increasing the intake of milk and dairy products, soybeans and nuts, reducing the intake of fried foods, and adjusting the overall dietary structure should be recommended in order to prevent the development of myopia in adolescents.