BACKGROUND:How to effectively promote bone regeneration and bone reconstruction after bone injury has always been a key issue in clinical bone repair research.The use of biological and degradable materials loaded with bioactive factors to treat bone defects has excellent application prospects in bone repair. OBJECTIVE:To investigate the effect of polylactic acid-glycolic acid copolymer(PLGA)composite scaffold modified by lysine-grafted graphene oxide nanoparticles(LGA-g-GO)on osteogenic differentiation and new bone formation. METHODS:PLGA was dissolved in dichloromethane and PLGA scaffold was prepared by solvent evaporation method.PLGA/GO composite scaffolds were prepared by dispersing graphene oxide uniformly in PLGA solution.LGA-g-GO nanoparticles were prepared by chemical grafting method,and the PLGA/LGA-g-GO composite scaffolds were constructed by blending LGA-g-GO nanoparticles at different mass ratios(1%,2%,and 3%)with PLGA.The micromorphology,hydrophilicity,and protein adsorption capacity of scaffolds of five groups were characterized.MC3T3 cells were inoculated on the surface of scaffolds of five groups to detect cell proliferation and osteogenic differentiation. RESULTS AND CONCLUSION:(1)The surface of PLGA scaffolds was smooth and flat under scanning electron microscope,while the surface of the other four scaffolds was rough.The surface roughness of the composite scaffolds increased with the increase of the addition of LGA-g-GO nanoparticles.The water contact angle of PLGA/LGA-g-GO(3%)composite scaffolds was lower than that of the other four groups(P<0.05).The protein adsorption capacity of PLGA/LGA-g-GO(1%,2%,and 3%)composite scaffolds was stronger than PLGA and PLGA/GO scaffolds(P<0.05).(2)CCK-8 assay showed that PLGA/LGA-g-GO(2%,3%)composite scaffold could promote the proliferation of MC3T3 cells.Alkaline phosphatase staining and alizarin red staining showed that the cell alkaline phosphatase activity in PLGA/LGA-g-GO(2%,3%)group was higher than that in the other three groups(P<0.05).The calcium deposition in the PLGA/GO and PLGA/LGA-g-GO(1%,2%,and 3%)groups was higher than that in the PLGA group(P<0.05).(3)In summary,PLGA/LGA-g-GO composite scaffold can promote the proliferation and osteogenic differentiation of osteoblasts,and is conducive to bone regeneration and bone reconstruction after bone injury.

Persistent left superior vena cava is a rare venous variant that is often combined with cardiovascular malformations. In thoracic surgery, especially mediastinal tumor resection, neglect of this variant may make the surgery difficult and risky, and careful preoperative imaging interpretation and adequate preoperative evaluation play an important role in the perioperative safety of the patient. In this paper, we reported a case of a 17-year-old female patient with a persistent left superior vena cava combined with mediastinal tumors. She was successfully discharged 5 days after thoracoscopic surgery, and after 3 years of postoperative follow-up, no tumor recurrence was observed.

Objective To investigate the epidemiological characteristics of dengue fever in Shenzhen City in 2024, so as to provide insights into formulation of the preventive and control measures for dengue fever. Methods The epidemiological data of dengue cases reported in Shenzhen City in 2024 were extracted from the China Disease Prevention and Control Information System and field epidemiological survey data of dengue fever in Shenzhen City, and the temporal, regional and population distributions of dengue fever cases, source of acquire dengue virus infections, disease diagnosis and treatment and outbreaks were analyzed. The dengue virus nucleic acid was tested and the serotypes of dengue virus were characterized using real-time quantitative reverse transcription PCR (RT-qPCR) assay, and the dengue virus gene was sequenced using next-generation sequencing (NGS). In addition, the surveillance on the density of Aedes albopictus was performed using Breteau index (BI) and mosquito oviposition index (MOI). Results A total of 1 735 dengue fever cases were reported in Shenzhen City in 2024, including 952 local cases and 783 imported cases. Most imported dengue fever cases acquired infections from eight cities of Foshan, Guangzhou, Zhongshan, Jiangmen, Dongguan, Zhaoqing, Huizhou, and Zhuhai in the Pearl River Delta region (664 cases, 84.8% of total imported cases) into Baoan, Longgang, and Nanshan districts. The epidemic exhibited an early onset and rapid progression, peaking during the period between September and November (1 632 cases, 94.1% of total cases), and dengue fever cases were distributed across 73 subdistricts in 10 districts, with most cases reported in densely populated central and western regions. The dengue fever cases had a male-to-female ratio of 1.9∶1.0, and a median age of 37 (21) years, with a higher median age among local cases than among imported cases [40 (20) years vs. 33(15) years; Z = -10.30, P < 0.05]. Housework, unemployment, workers, and business service were predominant occupations (1 405 cases, 81.0% of total cases), and there was a significant difference in the constituent ratio of occupations between local and imported cases (χ² = 92.30, P < 0.05). Among the 1 735 dengue fever cases, the median duration from onset to definitive diagnosis was 3.3 (2.9) days, and 1 686 cases (97.2%) were identified in healthcare facilities, with a low rate of hospitalization and isolation seen in 1 701 inpatients with available epidemiological data (485 cases, 28.5% of total inpatients). A total of 29 outbreaks of dengue fever occurred in Shenzhen City across 2024, which primarily in construction sites (27 outbreaks, 93.1% of total). Dengue virus type I was the dominant serotype causing dengue fever in Shenzhen City in 2024. Sequencing showed that the genomes of dengue virus from multiple dengue fever cases in Shenzhen City shared a high sequence homology with those from cities neighboring Shenzhen City, and there might be intra-city transmission of dengue virus among multiple construction sites in Shenzhen City. The Aedes albopictus density was significantly higher in Shenzhen City in 2024 than in 2023, peaking from May to September. The annual MOI values ranged from 0.9 to 14.0, and the BI values ranged from 0.6 to 6.0. Conclusions The overall epidemic of dengue fever was severe in Shenzhen City in 2024, which was greatly affected by case importation from neighboring cities, construction sites-centered local transmission, and the effectives of routine mosquito vector control was not satisfactory. Integrated dengue fever control measures should be implemented, focusing on regional joint prevention and control mechanisms, capacity building for mosquito vector control, addressing challenges in epidemic containment at construction sites, and strengthening case detection and management systems.

OBJECTIVE: To develop an objective quantitative evaluative model of manual acupuncture manipulation (MAM) using three-dimensional motion tracking technology and machine learning, so as to provide a new approach to the study on acupuncture and moxibustion education and manipulation standardization. METHODS: A total of 120 undergraduate students in the major of acupuncture-moxibustion and tuina were recruited. The Simi Motion Ver.8.5 motion tracking system was used to collect the data of three types of MAM, balanced reinforcing and reducing by twisting, reinforcing technique by twisting and reducing technique by twisting. Eight quantitative parameters covering movement performance and stability were established. With 5 types of machine learning algorithms (logistic regression, random forest, support vector machine, K-nearest neighbor, and decision tree) adopted, the evaluative model was constructed, and the feature importance analyzed. RESULTS: In the evaluation of different types of MAM, the support vector machine presented the best for the effects of the balanced reinforcing and reducing by twisting, and the reducing by twisting (accuracy rates were both 0.88); and the logistic regression algorithm showed the optimal performance in evaluating the reinforcing by twisting (1.00 of accuracy rate). Feature importance analysis revealed that twisting velocity was the dominant parameter for evaluating the balanced reinforcing-reducing manipulation. The reinforcing and reducing of acupuncture techniques were more dependent on the left-hand twisting parameters and comprehensive performances, respectively. CONCLUSION The objective evaluative model of MAM based on three-dimensional motion tracking technology and machine learning demonstrates a reliable evaluative performance, providing a new technical approach to standardized assessment in acupuncture and moxibustion education.
Humans ; Male ; Acupuncture Therapy/instrumentation* ; Machine Learning ; Female ; Young Adult ; Adult ; Motion

Endotoxins are common exogenous pyrogens. Excessive endotoxins in medical devices and injections can lead to serious consequences such as sepsis, septic shock, and even death. Therefore, endotoxin detection plays a crucial role in medical, pharmaceutical, and food sectors. The wide application of Limulus amebocyte lysate (LAL) has led to a sharp decline in the number of horseshoe crabs. Moreover, the LAL assay has limitations such as interbatch variations and difficulty in quantification. The recombinant factor C (rFC) assay is stable between batches, highly sensitive, and capable of quantitation, and thus it can be used as an alternative for the LAL assay. However, the high cost and complex procedures involved in producing recombinant factor C have limited the widespread application of this method. In order to simplify the preparation and reduce the production cost of recombinant factor C, this study focuses on the production of recombinant factor C based on the baculovirus expression system. Multiple measures such as a high-yield and anti-apoptotic vector qBac-IIIG, the optimal signal peptide, and the optimized codon were used to reach the goal of endotoxin detection with cell supernatant. This method simplifies the steps of protein purification. The sensitivity of the supernatant reached 0.05 EU/mL in a 1-L fermentation system, and 500 000 detecting reactions can be supported per liter of fermentation broth. This study increases the yield and activity of recombinant factor C, simplifies the procedures of protein purification, and reduces the cost, laying a foundation for the promotion and application of recombinant factor C in endotoxin detection.
Animals ; Recombinant Proteins/genetics* ; Horseshoe Crabs/chemistry* ; Baculoviridae/metabolism* ; Endotoxins/analysis* ; Protein C/biosynthesis* ; Genetic Vectors/genetics* ; Arthropod Proteins/genetics* ; Enzyme Precursors ; Serine Endopeptidases

Objective: To investigate the association between edentulism and the risk of social isolation in middle-aged and elderly populations, provide empirical evidence for formulating social isolation prevention and intervention policies targeting edentulous middle-aged and elderly populations. Methods: Data were derived from the baseline survey (2011) and three follow-ups (2013, 2015, 2018) of the China Health and Retirement Longitudinal Study (CHARLS). Participants were enrolled in the follow-up from the baseline. Those identified as socially isolated in any of the follow-up surveys conducted in 2013, 2015, or 2018 were considered to have reached the endpoint; otherwise, the follow-up was continued until the end of the 2018 survey; 9 870 individuals were ultimately included. Subjects were grouped by edentulism status. Chi-square test and multivariate Cox regression analysis were performed using Stata 17.0. Results: During a median follow-up of 6.54 years, 1 800 cases of social isolation occurred, with an incidence rate of 18.23%（17.47%~18.99%）. Multivariate Cox regression showed that edentulism was associated with an increased risk of social isolation (HR=1.21, 95% CI: 1.03-1.42) after adjusting for confounders. Subgroup analysis revealed population heterogeneity. Sensitivity analyses confirmed the stability of the results. Conclusion Edentulism is associated with an increased risk of social isolation in middle-aged and elderly adults.

OBJECTIVE To provide standardized whole-process guidance on drug traceability codes for medical institutions in Sichuan province， ensuring medication safety and compliance with medical insurance supervision requirements. METHODS Based on evidence-based principles and expert consensus， Expert Consensus on Whole-process Management of Drug Traceability Codes in Medical Institutions of Sichuan Province （hereinafter referred to as the Consensus） was formulated through systematic literature review， field investigations， establishment of a multidisciplinary expert committee and multiple rounds of questionnare consultation via the modified Delphi method， and finalized through consensus meetings. RESULTS & CONCLUSIONS The Consensus clarifies key operating procedures for code verification， code assignment and code return， whole-process operational standards for drug warehouse acceptance and storage， drug warehouse outbound delivery and pharmacy acceptance check， drug distribution and dispensing in pharmacy and intravenous admixture center， medication administration in nursing units and examination departments， as well as drug return process. Key recommendations are proposed such as improving the core functions of the drug traceability system， unifying the hospital-wide traceability code database， strengthening the management of traceability codes for backup medications， establishing a management organization and institutional framework， and optimizing the architectural design and data governance requirements of the drug traceability system. The release of the Consensus will provide scientific， standardized and implementable practical guidelines for medical institutions of Sichuan province， helping to improve closed-loop management of the drug traceability system， strengthen medication safety and fulfil medical insurance fund supervision.

Objective: To investigate the efficacy and incidence of adverse reactions of therapeutic erythrocytapheresis in high altitude polycythemia (HAPC) population. Methods: A retrospective study was conducted on 243 HAPC patients who were either native residents or long-term workers in Xizang and underwent therapeutic erythrocytapheresis in the Chengdu Office Hospital of the People's Government of Xizang Autonomous Region from 2021 to 2023. A comparative study was carried out on the changes in blood routine, vital signs, skin color, serum iron metabolism data, and the incidence of adverse reactions before and after the procedure. Results: After erythrocytapheresis, significant decreases were observed in red blood cell (RBC) count (7.06±0.89×10 vs 6.08±0.93×10 /L, P<0.001], hemoglobin (HGB, 211.59±17.99 vs 182.76±19.83 g/L, P<0.001), hematocrit (Hct) [(65.30±6.45)% vs (55.56±8.12)%, P<0.001], serum iron (14.46±4.38 vs 11.77±3.78 μmol/L, P=0.003), total iron-binding capacity (126.62±4.47 vs 123.73±3.77 μmol/L, P=0.002), transferrin (1.88±0.41 vs 1.77±0.12 g/L, P=0.023), transferrin saturation [(11.32±3.11)% vs (9.43±2.78)%, P=0.004], serum ferritin (832.4±295.6 vs 665.3±249.2 ng/mL, P<0.001), systolic blood pressure (123.86±14.43 vs 118.51±13.68 mmHg, P<0.001) and diastolic blood pressure (81.68±9.54 vs 74.28±7.61 mmHg, P<0.001). In contrast, platelet count (Plt, 137.21±46.21 ×10 vs 147.94±50.66 ×10 /L, P<0.001) and oxygen saturation [(93.97±3.29)% vs (95.84±2.27)%, P<0.001] increased. No significant differences were found in white blood cell (WBC) count [5.35 (4.59, 6.44)×10 /L vs 5.43 (4.54, 6.53) ×10 /L, P=0.690], unsaturated iron-binding capacity (112.15±0.50 vs 111.96±0.25 μmol/L, P=0.074) and pulse rate (73.42±11.28 vs 73.19±7.18 beats/min, P=0.750). Furthermore, skin color of the face (conjunctiva, lips) and palms mitigated after therapeutic erythrocytapheresis, changing from purplish-red to red. The total incidence of adverse reactions during erythrocytapheresis was 13.98% (34/243), including citrate toxicity 12.75% (31/243), puncture site hematoma 0.82% (2/243) and blood volume imbalance 0.41% (1/243). Conclusion: Therapeutic erythrocytapheresis could rapidly decrease HCT, Hb, serum iron, transferrin and transferrin saturation levels in HAPC patients, with a low incidence of adverse reactions. Therefore, therapeutic erythrocytapheresis has broad clinical application prospects in Xizang Autonomous Region.

Objective:To investigate the efficacy of volar anatomical locking plates combined with dorsal mini-plates in treating com-plex distal radius fractures.Methods:We retrospectively included patients with complex distal radius fractures who had been treated with volar locking plates and dorsal mini-plates at Chongqing General Hospital from January 2019 to June 2023.The quality of articu-lar surface fragment reduction was assessed through image analysis.Follow-up data included the Mayo wrist score,Disabilities of the Arm,Shoulder,and Hand Questionnaire(DASH)score,wrist range of motion,time to fracture healing,and complications.Results:Twenty-eight patients[19 males,9 females;mean age,(45.4±11.9)years]were included,with a mean follow-up of 1(4.9±3.6)months.Their injury mechanisms included falls from height(11 cases),traffic accidents(9 cases),and simple falls(8 cases).After op-eration,the volar tilt was(5.1±4.9)°,and the ulnar inclination was(19.8±2.8)°;at the final follow-up,the angles were(5.2±4.8)° and(19.3±2.5)°,respectively,neither showing any significant change(P>0.05).At the final follow-up,all fractures healed,with a mean healing time of 3.6 months.At 1 year after operation,the wrist extension was(50.7±6.3)°;the wrist flexion was(49.4±6.1)°;the DASH score was 15.0±6.3;the Mayo wrist scores were excellent or good in 24 cases;the grip strength of the affected side averaged 84.4%of that of the contralateral side.No implant loosening occurred.Two cases of superficial wound infection and one case of exten-sor tendon irritation were reported.Conclusion:Locked volar plat-ing combined with dorsal mini-plating provides stable fixation for comminuted articular surface fragments in complex distal radius fractures,enabling early functional rehabilitation with favorable wrist recovery and low rates of dorsal tendon irritation.

Microfluidic chips have revolutionized analytical sciences through miniaturization and high-throughput capabilities.However,conventional static devices are constrained by fixed architectures,functional rigidity,and high customization costs.In recent years,,the emerging configurable and reconfigurable microfluidic technologies have provided solutions for these limitations through dynamic adaptability.Configurable systems enable post-fabrication customization via modular assembly or boundary modification,offering cost-effective functional versatility.Reconfigurable microfluidics represents a more advanced paradigm,incorporating real-time decision-making and dynamic control through physical/virtual boundary adjustments during operation.These adaptive systems enable precise manipulation of microenvironments for applications ranging from single-cell manipulation to dynamic biochemical synthesis.In this review,a ″static-dynamic boundary″ framework to systematically analyze both technologies was proposed,and the design rationales,operational mechanisms,and implementation strategies were compared.The development history of these two techniques was introduced,and the applications demonstrated their transformative potential in developing intelligent lab-on-chip systems,while technical challenges in standardization and control interfaces were critically assessed.The development trend on integrating smart materials and AI-driven automation to advance next-generation adaptive microfluidic platforms was prospected.