Fused teeth were a phenomena of teeth anomalies in shape, which can affect the dental teeth both in primary and permanent dentition. Fused teeth do not only cause problems on crowding of dentition, abnormal occlusion and aesthetic, but also increase risks of dental caries, endodontics diseases, periapical diseases and periodontal diseases. Fusion of deciduous teeth may lead to abnormality of subsequent permanent teeth. Treatment of fused teeth may require multidisciplinary approach in endodontics, periodontics, oral and maxillofacial surgery, prosthodontics and orthodontics. The aim of the present article is to review the etiology, classification, clinical manifestations and treatment of fused teeth in order to provide dental clinicians with a reference of clinical management for fused teeth.
Humans ; Fused Teeth/therapy* ; Anodontia ; Tooth, Deciduous ; Dental Caries/therapy* ; Esthetics, Dental

Humans ; Esthetics, Dental ; Dental Implantation, Endosseous ; Dental Implants, Single-Tooth

OBJECTIVES: To summarize the open-eruption technique of impacted anterior maxillary teeth, this study reports a technically improved operation on surgical exposure based on dental follicles and evaluates post-treatment periodontal health considering the effect of dental follicles. METHODS: Patients who underwent open-eruption technique with unilateral labially impacted maxillary central incisors were selected. The impacted teeth were assigned to the experimental group, and the contralateral unimpacted maxillary central incisors were assigned to the control group. In the surgical exposure, the new technique makes use of dental follicles to manage the soft tissue, so as to preserve soft tissue for better aesthetic results and healthier periodontal tissue. Tooth length, root length, alveolar bone loss, and alveolar bone thickness were recorded after the therapy. RESULTS: A total of 17 patients with unilateral maxillary central incisor impaction were successfully treated. The tooth length and root length of the two groups showed a statistically significant difference between the impacted and homonym teeth, with a shorter length in the impacted tooth (P<0.05). More labial alveolar bone loss was found in the experimental group compared with that in the control group (P<0.05). The outcomes of the cementoenamel junction width, pa- latal alveolar bone loss, and alveolar bone thickness did not indicate statistical significance between the experimental and control groups (P>0.05). CONCLUSIONS In the surgical exposure, the new technique uses dental follicles to manage the soft tissue and preserve it for better aesthetic results and healthier periodontal tissues.
Humans ; Tooth, Impacted/surgery* ; Incisor ; Alveolar Bone Loss/diagnostic imaging* ; Tooth Root ; Dental Sac ; Maxilla/surgery* ; Esthetics, Dental

OBJECTIVES: To investigate the effect of different soft-tissue morphologies on the treatment of skeletal class Ⅰ malocclusion patients by analyzing measurement data before and after treatment. METHODS: Pre- and post-treatment lateral cephalograms of 55 adult female Angle class Ⅰ patients were collected in the Department of Orthodontics, Hospital of Stomatology, Jilin University from January 2012 to December 2020. Chin soft-tissue morphologies in the lateral cranial radiographs were used to divide the patients into an abnormal chin morphology group (flat and retracted chins, n=27) and a normal chin morphology group (rounded and prominent chins, n=28). Relevant soft- and hard-tissue indexes were selected to study in-group varieties and intergroup differences in the varying chin morphologies before and after treatment. RESULTS: The chin-lip angle, mandibular chin angle, mandibular chin vertex angle, PP-MP, LL-E, UL-E, Po-Pos, and B-B' thickness in the abnormal chin morphology group were significantly higher than those in the normal chin morphology group (P<0.05). Furthermore, m∶BMe and n∶B'Mes in the abnormal chin morphology group were signi-ficantly lower than those in the normal chin morphology group (P<0.05). After treatment, the mandibular chin angle, mandibular chin vertex angle, U1-SN, L1-MP, LL-E, UL-E, SNA, SNB, and B-B' thickness of the abnormal chin morphology group significantly decreased (P<0.05), whereas the nasolabial angle, m∶BMe, n∶B' Mes, and Po-Pos significantly increased (P<0.05). In the normal chin morphology group, the U1-SN, L1-MP, LL-E, UL-E, and B-B' thicknesses decreased significantly (P<0.05), whereas the nasolabial angle significantly increased (P<0.05). Among them, m∶BMe and n∶B' Mes were positively correlated. CONCLUSIONS Chin morphology affects the formulation of treatment plans. Compared with the normal chin morphology group, the abnormal chin morphology group required a larger retraction of incisors. Although the chin of soft-tissue morphology is related to the morphology of bones, the changes in soft tissue chin after treatment cannot be directly predicted according to the bone changes. Soft-tissue chin morphology affects the aesthetic assessment of the soft-tissue lateral profile and the change in soft tissue before and after treatment. The method of predicting the change in soft-tissue chin after treatment should consider the morphology of the soft-tissue chin.
Adult ; Humans ; Female ; Chin ; Lip ; Cephalometry/methods* ; Esthetics, Dental ; Mandible

OBJECTIVES: This study aimed to evaluate the efficacy and long-term stability of tunnel technique (TUN) and coronally advanced flap (CAF) combined with connective tissue graft (CTG) in treating gingival recession. METHODS: Databases including PubMed, Web of Science, Embase, and CNKI were electronically searched to collect randomized controlled trial (RCT) of CAF+CTG compared to TUN+CTG in the treatment of Miller class Ⅰ or Ⅱ gingival recession on September 1, 2022. RESULTS: There were 8 RCTs with 305 patients (454 recession sites) participating. The results of the Meta-analysis revealed that, in terms of mean root coverage (MRC) of main indicators, no significant difference was found between the CAF group and the TUN group in both short- and long-term results, which were [MD: 1.45%, 95%CI (-2.93%, 5.82%), P=0.52] and [MD: -0.70%, 95%CI (-6.41%, 5.00%), P=0.81]. However, the CAF group outperformed the TUN group in the long term [MD: 5.69%, 95%CI (0.87%, 10.50%), P=0.02], and the results of complete root coverage (CRC) analysis were similar to those of MRC. In the short term, the TUN group grew keratinized gingiva significantly faster than the CAF group [MD: -0.38 mm, 95%CI (-0.67 mm, -0.10 mm), P=0.008]. Long-term findings revealed no significant difference between the two groups [MD: -0.26 mm, 95%CI (-0.94 mm, 0.43 mm), P=0.46]. The TUN group's secondary index root coverage esthetic score (RES) was statistically significantly higher than the CAF group's [MD: 0.62, 95%CI (0.28, 0.96), P=0.000 3]. Given that there were few results included in the literature and the heterogeneity was too great, no significant difference was observed in the postoperative VAS pain index score [MD: 0.53, 95%CI (-1.96, 3.03), P=0.68]. CONCLUSIONS This study discovered that both CAF+CTG and TUN+CTG can achieve good root coverage in treating gingival recession, with CAF outperforming TUN and both groups achie-ving good long-term stability. After the operation, the TUN group had a higher RES than the CAF group. Given the limitations of this study, more high-quality studies are needed in the future to demonstrate the efficacy of TUN in gingival retraction surgery.
Humans ; Gingival Recession/surgery* ; Treatment Outcome ; Tooth Root ; Esthetics, Dental ; Gingiva/surgery*

Implant treatment in the esthetic area requires stable osseointegration and successful esthetic outcomes. Achieving this goal requires careful consideration of accurate implant axis and ideal three-dimensional position. Owing to the high esthetics and the special anatomical structure of the maxillary, a successful implant means a synthesized deli-beration of the residual bone dimensions, soft-tissue thickness, and the relationship of the residual alveolar ridge with the planned restoration. This article offers an in-depth analysis of the clinical decisions and key factors affecting the implant direction in the esthetic area.
Dental Implantation, Endosseous/methods* ; Dental Implants ; Esthetics, Dental ; Alveolar Ridge Augmentation/methods* ; Osseointegration ; Maxilla/surgery* ; Dental Implants, Single-Tooth

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.
Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Esthetics, Dental ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Young Adult

In dental esthetic rehabilitation, patients pay great attention to the rehabilitative esthetic effect before teeth preparation, and this is also an important content of doctor-patient communication. Along with the development and combined application of intraoral scan, three-dimensional (3D) face scan, digital design, numerical control machining and 3D printing technology, digital technology is gradually applied to the virtual simulated design before irreversible operation in dental esthetic rehabilitation. Digital technology can be used in dentistry to simulate the esthetic outcome in advance, to assist communication among the dentists, patients and dental technicians, and to realize satisfactory outcome in the final restorations precisely, which, as a result, increases the clinical satisfaction. This review focuses on the application of digital virtual simulated design technology in dental esthetic rehabilitation, analyzes the current research development, deficiency and future prospects, so as to provide guidance for clinical diagnosis and treatment.
Computer-Aided Design ; Esthetics, Dental ; Face ; Humans ; Printing, Three-Dimensional ; Tooth Preparation

In the field of dental implantology, the design of interface esthetics not only affects the esthetic coutcome, but also affects the health and long-term stability of the tissue around dental implant. Dental implant, bone tissue, soft tissue, and prostheses' morphology are the four critical elements of interface esthetics. The emergence profile located at the junction of these four components is an important form of oral esthetics. With the wide application of digital technique in the field of dentistry, the shaping of emergence profile also involves the application of many kinds of digital approaches. This article intends to make a review of the application of digital technique in rehabilitation of interface esthetics to provide a reference for clinical practic.
Dental Implants ; Dental Prosthesis, Implant-Supported ; Esthetics, Dental

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.
Adult ; Cone-Beam Computed Tomography ; Dental Implants ; Esthetics, Dental ; Female ; Gingiva/anatomy & histology* ; Humans ; Male ; Maxilla/diagnostic imaging* ; Tooth Crown ; Young Adult