ObjectiveTo systematically evaluate the content differences of 4 components in Leonuri Herba granules， reveal the quality fluctuation patterns of products from the same and different manufacturers， providing scientific basis for the optimization of production process and quality control. MethodsHigh performance liquid chromatography-diode array detector-charged aerosol detector（HPLC-DAD-CAD） was employed to determine the contents of 4 components（syringic acid， leonurine hydrochloride， ferulic acid， and stachydrine hydrochloride） in samples from 19 manufacturers（53 batches， 159 boxes）. Additionally， fingerprint profiles were constructed， and the fingerprint dissimilarity（P_S） and relative standard deviation（RSD） of different samples from the same manufacturer were calculated. A principal component analysis（PCA） model was established with P_S and the RSD values of the 4 components as variables to classify the manufacturers. Finally， samples from 5 manufacturers（M1-M5） covering three consistency groups were selected to calculate three quality consistency parameters， namely intra-batch consistency（P_A）， inter-batch consistency（P_B）， and P_S. Then， PCA was performed with P_A， P_B， and P_S of these 5 manufacturers as variables. ResultsThe average total content of the 4 index components per bag across the 19 manufacturers ranged from 41.10 mg to 97.54 mg. Among them， the content of stachydrine hydrochloride（a pharmacopoeial quality control component） was 32.46-72.70 mg per bag， all meeting the requirements of the 2025 edition of the Pharmacopoeia of the People's Republic of China， with RSD of 1.7%-17.1%. The content ranges of the other 3 components were as follows：syringic acid of 1.43-41.92 mg per bag， leonurine hydrochloride of 0.67-11.85 mg per bag， and ferulic acid of 0.11-3.81 mg per bag. Notably， leonurine hydrochloride exhibited the most significant content fluctuation among samples from the same manufacturer（RSD of 4.8%-59.2%）. PCA results showed that the 19 manufacturers could be classified into 3 categories. Samples from 8 manufacturers（M2， M6， M7， M8， M10， M15， M17， M18） demonstrated relatively high consistency， five manufacturers（M3， M9， M12， M13， M14） showed moderate consistency， six manufacturers（M1， M4， M5， M11， M16， M19） exhibited low consistency. The two methods yielded consistent classification results for the 5 representative manufacturers， verifying the reliability of the proposed method. Among these， manufacturer M2 showed the best quality consistency and the highest total content of indicator components among M1-M5. ConclusionThe HPLC-DAD-CAD multi-detector hyphenation technology established in this study enables the accurate detection of 4 components in Leonuri Herba granules. Significant differences in the total content of these four components are observed among products from 19 manufacturers. The application of 2 consistency evaluation methods combined with PCA can effectively classify their consistency into 3 categories， and the classification results of the 2 methods are highly consistent. This study provides scientific basis for the process optimization and quality standard improvement of Leonuri Herba granules.

This article systematically analyzes the historical evolution of the name， origin， medicinal parts， producing area， harvesting and processing， nature， flavor and efficacy of Piperis Longi Fructus by referring to the materia medica， medical books， and prescription books of past dynasties， combined with the relevant modern literature， in order to provide a basis for the development and utilization of famous classical formulas containing this herb. According to the herbal textual research， the name of Piper longum first appeared in Nanfang Caomuzhuang， and it also has other aliases such as Biboli， Halou， and Hujiaohua. Historically， the origin of Piperis Longi Fructus has been P. longum of the Piperaceae family. In ancient times， both the fruit and root were used as medicine， and since the Republic of China， the fruit has been mainly used as medicine. The medicinal part is the dried， nearly ripe or ripe fruit spikes. Piperis Longi Fructus is native to India and has been introduced into China since the Tang dynasty. In the Ming dynasty， Bencao Pinhui Jingyao clearly stated that the genuine producing area was "Duanzhou"， present-day Zhaoqing in Guangdong province. Nowadays， it is planted in Guangdong， Guangxi， Hainan， Yunnan and other regions. Historically and currently， harvesting occurs in autumn. The ancient processing method uniformly involved removing the stems， soaking in the sourest vinegar overnight， baking， and scraping off the peels and grains with a knife until clean. In modern times， impurities are removed， and it is dried in the sun and crushed when used. The properties， functions and applications of P. longum are basically the same in ancient and modern times. It tastes pungent， is warm in nature， and non-toxic. It has the effects of warming the middle-jiao to dispel cold， lowering Qi and relieving pain， and is used for cold pain in the epigastrium and abdomen， vomiting， diarrhea， chest pain， headache， and toothache. Based on the research results， it is recommended that when developing famous classical formulas containing Piperis Longi Fructus， the dried nearly ripe or ripe fruit spikes of P. longum should be used. If there are no clear processing requirements， it is recommended to use the raw products for medicinal use， and the specific processing methods can refer to the relevant requirements under Piperis Longi Fructus in the 2025 edition of the Pharmacopoeia of the People's Republic of China. If processing requirements such as soaking in vinegar and peeling are clearly specified， it is recommended to follow the ancient methods.

ObjectiveTo comprehensively identify the O-methyltransferase （OMT） genes in Carthamus tinctorius and explore the key OMTs that can catalyze the methylation of flavonoids， providing a basis for understanding the molecular formation mechanism of the structural diversity of flavonoids in C. tinctorius. MethodsThe hidden Markov model was used to systematically identify the type Ⅰ OMTs from the high-quality genome data of C. tinctorius. A suite of bioinformatics tools was employed to systematically analyze the physicochemical properties， gene structure， conserved motifs， chromosomal localization， gene replication events， and collinearity of the identified genes. The target gene was heterologously expressed through the prokaryotic expression system of E. coli， and the protein function was verified by in vitro enzymatic reactions. ResultsA total of 31 type Ⅰ OMTs were identified. CtFOMT1 was successfully cloned and expressed in a soluble form in Escherichia coli. The recombinant protein was purified via Ni²⁺ affinity chromatography to obtain a high-concentration preparation. In vitro enzymatic assays demonstrated that CtFOMT1 utilized S-adenosylmethionine as the methyl donor to catalyze the methylation of the 4′-OH of naringenin， resulting in the production of isosakuranetin. A similar process occurred with the 4′-OH of luteolin， leading to the formation of diosmetin. Subsequent methylation of the 3′-OH group of diosmetin generated 4′-methylchrysoeriol. ConclusionCtFOMT1 can catalyze the methylation of 4′-/3′-OH in the flavonoid skeleton. It is hypothesized that CtFOMT1 may play a role in the biosynthesis of various 4′-/3′-oxymethyl flavonoids in C. tinctorius.

Hepatitis D is an inflammatory liver disease caused by hepatitis D virus （HDV） infection， and co-infection of HDV and hepatitis B virus dramatically accelerates the progression of liver disease and significantly increases the risk of liver cirrhosis and hepatocellular carcinoma. However， due to insufficient awareness and concern about hepatitis D among the public， clinicians， and public health workers， the screening rate of hepatitis D remains at a relatively low level around the world. The true disease burden of hepatitis D has been seriously underestimated， and it has become one of the major challenges in the global campaign of hepatitis elimination. This article systematically reviews the current epidemiological situation of hepatitis D， prevention and control strategies， and related issues and challenges and analyzes the future strategies and measures for prevention and control， in order to provide a reference for promoting the achievement of the goal to eliminate viral hepatitis as a public health threat.

ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

Endodontic microsurgery (EMS) is an oral surgical procedure that utilizes the magnification and illumination provided by a microscope. Fine instruments are used to remove periapical diseased tissues, resect the root apex, and tightly seal the root canal system, aiming to promote the healing of periapical tissues and retain the affected tooth whenever possible. Precise localization and resection of the root apex have always been challenging in EMS. The application of digital technology in EMS can address many issues in traditional endodontic microsurgery. Digital technology offers advantages such as optimizing surgical planning, providing precise positioning guidance, and enhancing operational accuracy. Currently, the commonly used digital technologies in EMS include static and dynamic navigation technologies and oral surgical robots. Static navigation technology enhances surgical predictability through precise preoperative planning and guided fabrication, yet is constrained by its inability to adjust during surgery. Dynamic navigation technology excels in real-time tracking and intraoperative flexibility but demands high hand-eye coordination from surgeons and may be hindered by bulky handheld devices. Oral surgical robots reduce hand tremors and human error in surgery with their high precision, stability, and ability to adjust in real time, but their clinical applicability is limited and their cost is high. In clinical practice, tailored combinations of these technologies can be applied based on case complexity. For simple cases with well-defined anatomy, static navigation alone may suffice. For complex anatomical cases, static navigation can provide initial planning, supplemented by dynamic navigation for real-time guidance or robotic systems for high-precision execution. This paper discusses the workflow, clinical application status and advantages and limitations of these three digital technologies in EMS. The continuous development of digital technology is expected to simplify the operation process, improve the navigation accuracy, and reduce the operation cost. It is believed that with continuous improvement and optimization, these technologies will effectively break through the current bottleneck of the cost of equipment, operation complexity, and accuracy enhancement. These technologies are also expected to further expand the application boundaries, providing more minimally invasive, precise, and time-saving personalized treatment solutions for endodontic diseases.

ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

ObjectiveBased on the traditional quality evaluation methods summarized in previous dynasties， this paper systematically contrasted the quality differences between wild Polygalae Radix（WPR） and cultivated Polygalae Radix（CPR） from the aspects of character， microscope and chemical composition by modern scientific and technological means， providing a basis for high-quality production and quality control. MethodsCPR and local WPR in Yulin city， Shaanxi province from 1 to 6 years were collected， and a systematic comparative analysis was conducted using traditional pharmacognosy research methods combined with modern multi-omics analysis techniques， including character traits（length， weight， diameter）， cross-sectional microscopic features（proportions of cork， phloem， xylem， etc）， cell wall component content（hemicellulose， cellulose， lignin）， extracts content（water-soluble extract and alcohol-soluble extract）， carbohydrate content（starch， water-soluble polysaccharides）， contents of total flavonoids， total saponins and specific marker compounds（3，6′-disinapoyl sucrose， polygalaxanthone Ⅲ， tenuifoliside A， tenuifoliside C， sibiricose A₅ and A₆） and other indexes. Ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was employed to conduct comparative analysis of secondary metabolites in WPR and CPR， and multivariate statistical analysis such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were combined to screen the key differential components of them. ResultsIn terms of appearance， there were significant differences between WPR and CPR. The characteristics of WPR conformed to the "thick wrinkles on the epidermis" recorded in ancient books， featuring a wrinkled surface and grayish-brown appearance. However， CPR had a finer texture and a yellowish white appearance， with weight， length， and diameter increasing with longer cultivation periods. In terms of microscopy， WPR exhibited a thick cork layer with fissures in the phloem， whereas CPR had a thinner cork layer with uniformly arranged cork cells. Younger PR specimens showed numerous phloem fissures in cross-sections， while older specimens display progressively denser arrangements of phloem parenchyma cells. In terms of the contents of various major components， the contents of water-soluble extract， starch and total saponins in WPR were inversely proportional to the root diameter， while the contents of water-soluble extract， water-soluble polysaccharides and total saponins in CPR decreased with the increase of planting years. The content of xanthones in WPR was significantly higher than that of CPR， while the contents of other major components showed no significant change pattern. Among the six indicator components， the average content of sibiricose A₅ in WPR was significantly higher than that of CPR， followed by slightly higher content of tenuifoliside A. In CPR， the relative content of 3，6′-disinapoyl sucrose and tenuifoliside A was the highest. The former showed an increase in volatility with increasing cultivation years， while the latter showed a decrease in volatility. The results of differential compound analysis based on UPLC-Q-TOF-MS showed that there were significant differences in metabolites between WPR and CPR samples. Among them， the seven compounds with the largest differences among WPR samples of different thicknesses were polygalasaponins， and for CPR with different planting years， the main differential compounds were oligosaccharide esters. ConclusionThere are differences between WPR and CPR in character， microscopic structure and chemical composition， and some components are inversely proportional with the increase of diameter and cultivation duration due to the distribution characteristics. However， the longer the cultivation years of PR， the closer it is to the "thick wrinkles on the epidermis" of WPR， which has been respected by generations. It is suggested that this traditional character combined with modern component contents should be used as the index of artificial cultivation and quality control of PR.

ObjectiveBased on traditional quality evaluation of Gardeniae Fructus（GF） recorded in historical materia medica， this study systematically compared the quality differences between wild and cultivated GF from morphological characteristics， microscopic features， and contents of primary and secondary metabolites. MethodsVernier calipers and analytical balances were used to measure the length， diameter and individual fruit weight of wild and cultivated GF， and the aspect ratio was calculated. A colorimeter was used to determine the chromaticity value of wild and cultivated GF， and the paraffin sections of them were prepared by safranin-fast green staining and examined under an optical microscope to observe their microstructure. Subsequently， the contents of water-soluble and alcohol-soluble extracts of wild and cultivated GF were detected by hot immersion method under the general rule 2201 in volume Ⅳ of the 2020 edition of the Pharmacopoeia of the People's Republic of China， the starch content was measured by anthrone colorimetric method， the content of total polysaccharides was determined by phenol-sulfuric acid colorimetric method， the sucrose content was determined by high performance liquid chromatography coupled with evaporative light scattering detection（HPLC-ELSD）， and the contents of representative components in them were measured by ultra-performance liquid chromatography（UPLC）. Finally， correlation analysis was conducted between quality traits and phenotypic traits， combined with multivariate statistical analysis methods such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， key differential components between wild and cultivated GF were screened. ResultsIn terms of traits， the wild GF fruits were smaller， exhibiting reddish yellow or brownish red hues with significant variation between batches. While the cultivated GF fruits are larger， displaying deeper orange-red or brownish red. The diameter and individual fruit weight of cultivated GF were significantly greater than those of wild GF， while the blue-yellow value（b^*） of wild GF was significantly higher than that of cultivated GF. In the microstructure， the mesocarp of wild GF contained numerous scattered calcium oxalate cluster crystals， while the endocarp contained stone cell class round， polygonal or tangential prolongation， undeveloped seeds were visible within the fruit. In contrast， the mesocarp of cultivated GF contained few calcium oxalate cluster crystals， or some batches exhibited extremely numerous cluster crystals. The stone cells in the endocarp were predominantly round-like， with the innermost layer arranged in a grid pattern. Seeds were basically mature， and only a few immature seeds existed in some batches. Regarding primary metabolite content， wild GF exhibited significantly higher total polysaccharide level than cultivated GF（P<0.01）. In category-specific component content， wild GF exhibited significantly higher levels of total flavonoids and total polyphenols compared to cultivated GF（P<0.01）. Analysis of 12 secondary metabolites revealed that wild GF exhibited significantly higher levels of Shanzhiside， deacetyl asperulosidic acid methyl ester， gardenoside and chlorogenic acid compared to cultivated GF（P<0.01）. Conversely， the contents of genipin 1-gentiobioside， geniposide and genipin were significantly lower in wild GF（P<0.01）. ConclusionThere are significant differences between wild and cultivated GF in terms of traits， microstructure， and contents of primary and secondary metabolites. At present， the quality evaluation system of cultivated GF remains incomplete， and this study provides a reference for guiding the production of high-quality GF medicinal materials.