OBJECTIVE: To measure and analyze the occlusal force and contact in children with mixed dentition, and to preliminarily provide baseline data on the occlusion of individual normal occlusion children with mixed dentition. METHODS: A cross-sectional study was conducted, including 20 children with mixed dentition and individual normal occlusion, consisting of 12 boys and 8 girls, aged 6.5-9.8 years. The Dental Prescale Ⅱ occlusal analysis system was used to measure the occlusal force and contact at the intercuspal position, including the maximum occlusal force (N) and the occlusal contact area (mm²) of the entire dentition, and the left and right sides, average occlusal pressure (MPa), maximum occlusal pressure (MPa), and to determine the position of the center of occlusal force. The gender differences in maximum occlusal force, average occlusal pressure, and occlusal contact area were analyzed, the bilateral symmetry of occlusion in children with mixed dentition and individual normal occlusion was compared, and the correlation between occlusal data and age, height, weight, and body mass index (BMI) was analyzed. RESULTS: (1) The average maximum occlusal force of the entire dentition in the 20 children with mixed dentition at the intercuspal position was (869.18±106.64) N, the average occlusal contact area was (25.19±2.89) mm², the average occlusal pressure was (34.37±5.98) MPa, and the maximum occlusal pressure M(P₂₅, P₇₅) was 120 (120, 120) MPa; (2) There was no statistically significant difference in the maximum occlusal force, average occlusal pressure, maximum occlusal pressure, and occlusal contact area between the left and right sides (P>0.05); (3) At the intercuspal position, the average occlusal contact area for 12 boys and 8 girls was (26.71±3.91) mm² and (21.62±3.08) mm² respectively, and the average maximum occlusal force was (911.92±145.05) N and (769.47±116.45) N respectively, with statistically significant differences (P < 0.05), while there was no statistically significant difference in the average occlusal pressure between boys and girls (P>0.05); (4) The maximum occlusal force at the intercuspal position was weakly correlated with age (r=0.219, P=0.046), and strongly positively correlated with the occlusal contact area (r=0.949, P < 0.001), while the average occlusal pressure, maximum occlusal pressure, and occlusal contact area were not correlated with age, height, weight, or BMI; (5) The center of occlusal force in the 20 children with mixed dentition and individual normal occlusion was located in the molar region, with 7 children having the maximum occlusal pressure point only in the first permanent molar region, 10 children having it in both the deciduous molar region and the first permanent molar region, and 3 children having it only in the deciduous molar region. CONCLUSION In children with mixed dentition and individual normal occlusion, the maximum occlusal force, occlusal contact area, average occlusal pressure, and maximum occlusal pressure at the intercuspal position show good bilateral symmetry; there are gender differences in the maximum occlusal force and occlusal contact area, with boys having greater values than girls; the maximum occlusal force is positively correlated with the occlusal contact area.
Humans ; Child ; Male ; Bite Force ; Female ; Dentition, Mixed ; Cross-Sectional Studies ; Dental Occlusion

Occlusal rehabilitation is an effective means of treating tooth wear, edentulous jaws and other oral diseases. Among them, full-mouth fixed occlusal reconstruction can effectively restore aesthetics and function, but the complexity of the clinical process, the high sensitivity of the technique, and the high incidence of various complications have always drawn much attention. With the application and development of digital technology in occlusal rehabilitation, the treatment outcome has been improved compared with traditional treatment. However, there are many kinds of digital technology with different efficacy, how to build an efficiently standardized digital clinical technical solution is a current difficulty. Therefore, combined with the long-term work of the department of prosthodontics in our hospital, in this paper, the minimum (occlusal perception of thickness) and maximum (centric relation) geometric quantities which should be paid attention to during reconstruction are put forward. We systematically organized the clinical procedure of digital full-mouth fixed occlusal rehabilitation used in our department for a long time. In conclusion, a 5-stage 19-step or n-step solution (5-19N for short) characterized by "from large to small" restorative space splitting logic is proposed. It has a certain reference value for the future use of digital technology to deal with complex occlusal rehabilitation cases.
Humans ; Dental Occlusion ; Computer-Aided Design ; Mouth, Edentulous/rehabilitation*

Long-term dental implant stability is governed by the synergistic regulation of multiple factors, with occlusal parameters and marginal bone loss (MBL) progression being of paramount importance. Progressive MBL undermines mechanical retention, predisposing implants to micromotion and jeopardizing their long-term survival. Accumulating evidence has revealed that homeostatic occlusion imbalance, characterized by excessive occlusal loading, aberrant occlusal contacts, and dysfunctional guidance, significantly increases the incidence of peri-implant bone loss, thereby disrupting biomechanical homeostasis. Therefore, this manuscript delineates the mechanistic role of steady-state occlusal imbalance in driving peri-implant MBL and proposes a homeostatic occlusion-based strategy for preventing and controlling such bone loss, aiming to enhance the long-term stability of dental implants.
Humans ; Dental Implants ; Homeostasis ; Dental Occlusion ; Alveolar Bone Loss/prevention & control* ; Biomechanical Phenomena

OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.
Humans ; Dental Occlusion ; Cephalometry ; Mandible ; Temporomandibular Joint Disorders/diagnostic imaging* ; Temporomandibular Joint/diagnostic imaging* ; Osteoarthritis/diagnostic imaging* ; Mandibular Condyle

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.
Adult ; Humans ; Dental Occlusion ; Maxilla ; Cephalometry ; Malocclusion/therapy* ; Mandible

Early orthodontic treatment refers to the orthodontic treatment of dental-maxillofacial deformities in the early deciduous or mixed dentition. More and more attentions has been paid to early orthodontic treatment. Many kinds of orthodontic appliances are emerging on the market with the rapid development of the orthodontic technology. At the same time, problems and increased risks have followed in early orthodontic treatment. The contents of the article include the establishment of deciduous occlusion and the characteristics of the deciduous dentition, the orthodontic principles of different stages of deciduous dentition, the oral bad habits during the deciduous dentition and the risk control of early orthodontic treatment.
Dental Occlusion ; Dentition, Mixed ; Humans ; Malocclusion/therapy* ; Orthodontic Appliances ; Tooth, Deciduous

A 19-year-old female patient came with the chief complaint that the upper anterior teeth looked small and with many spaces. The patient claimed that the tooth had never been replaced since birth. The patient wanted to improve the aesthetics of the tooth. Treatment, in this case, was made using a fixed prosthetic to aesthetically rehabilitate through prosthodontic treatment in the anterior teeth agenesis followed by attrition. It can be concluded that fixed prosthodontic treatment using a splint bridge is one treatment option that can be used in multiple anterior teeth agenesis followed by tooth wear. An appropriate material selection increases the aesthetics and functional aspects of the final treatment.
Denture, Partial, Fixed ; Anodontia ; Dental Occlusion ; Humans ; Health

To evaluate the therapeutic effect of using micro-implant anchorage (MIA) to rotate the functional occlusal plane (FOP) counterclockwise. Forty skeletal class Ⅱ high-angle patients who had completed orthodontic treatment were enrolled, including 20 patients treated with MIA orthodontic system (MIA group) and the other 20 patients treated with traditional sliding straight wire appliance (control group). Cephalometric measurements on the lateral cranial radiographs before and after treatment were performed, all acquired data were statistically analyzed with SPSS 26.0. At the end of treatment, MIA group obtained better effect of FOP and mandibular plane counter-clockwise rotation than the control group. In the MIA group, the average change of FOP-frankfort horizontal plane (FH), FOP-SN and mandibular plane angle (MP-FH) angle was -4.5(-7.3, -3.7)°, (3.3)° and -1.7(-3.0, -0.9)°, respectively. In the control group, the average change of FOP-FH, FOP-SN and MP-FH angle was -0.1(-4.1, 3.0)°, (-0.1±5.1)° and -0.4(-2.4, 0.7)°, respectively. There was significant difference between the change of the two groups (all <0.05). Compared with the traditional sliding straight wire appliance, counterclockwise rotation of FOP can be more effectively reversed by using MIA orthodontic system, and the MP-FH can be reduced as well.
Cephalometry ; Dental Occlusion ; Humans ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla ; Treatment Outcome

The loss of posterior support and the abnormal jaw relation can cause pathologic findings. If deep bite patients with multiple missing teeth, can not have the stable posterior contact, the mandible moves posteriorly, and consequently the overjet and overbite get worse. And when the mandibular irregular occlusal plane is corrected, it is easier to have the bilateral balanced occlusion with the maxilla. So the treatment goal is to give proper posetrior support and establish appropriate anterior guidance, and ultimately provide improved mastication and esthetics recovery. In this case, a 68 year old man, having deep bite without posterior support was evaluated by the vertical dimesion decision flow-chart. An available prosthetic height, anterior occlusal relation such as overjet, overbite and the esthetic part such as facial height and the cephalometric analysis are the factors to be considered.
Dental Occlusion ; Esthetics ; Humans ; Jaw ; Mandible ; Mastication ; Maxilla ; Mouth Rehabilitation ; Mouth ; Overbite ; Tooth ; Vertical Dimension

OBJECTIVE: To observe the changes of forward displacement of maxillary complete denture during centric occlusion, three different methods were used to record the changes of vertical overlap and the comfort level of patients before and after the selective grinding of the three dentures made according to maxillo-mandibular horizontal relationship record. METHODS: Twelve edentulous patients with normal stomatognathic system were recruited in this study. Three types of complete dentures for these 12 edentulous patients were made according to their different maxilla-mandibular horizontal relationship record methods. The amount of displacement of the maxillary complete denture, the vertical overlap of the anterior teeth as well as patient comfort level were recorded before and after selective grinding. Statistical analysis was performed using the SPSS 17.0 software package. RESULTS: Before selective grinding, the amount of displacement of denture A was significantly larger than those of dentures B and C (P<0.05). After selective grinding, there was no statistical difference among the three dentures (P>0.05). During selective grinding, the vertical overlap variation of denture A was significantly greater than those of dentures B and C (P<0.05). Before selective grinding, the comfort level of the denture A was the lowest (P<0.05), and no statistical difference was found between dentures B and C (P>0.05). After selective grinding, no statistical difference was found among the three dentures (P>0.05). CONCLUSIONS Among the complete dentures with anatomical teeth, the dentures whose horizontal relationship was recorded at 1 mm before the apex of the Gothic arch apex and with checkbite are more in line with clinical repair requirements. Complete dentures whose horizontal relationship was recorded at the apex of Gothic arch need to be adjusted with selective grinding to meet the clinical restoration requirements.
Dental Occlusion, Centric ; Denture, Complete ; Humans ; Mandible ; Maxilla ; Mouth, Edentulous