Objective To investigate the prevalence of metabolic associated fatty liver disease(MAFLD)and its correlation with metabolic components among personnel on tropical islands.Methods The data of personnel who received health examination on islands in 2024 were analyzed,and they were grouped with the age limit of 30 years old to compare the detection rates of MAFLD and metabolic components in different age groups.In people aged≥ 30 years old,the age,gender,body mass index(BMI),waist circumference(WC),fasting blood glucose,blood lipids,liver function,kidney function and other indexes were compared between MAFLD and non-MAFLD groups.Univariate and multivariate logistic regression models were conducted to analyze the factors affecting the occurrence of MAFLD.The effects of various metabolic components on the risk of MAFLD in different age groups were analyzed by subgroup analyses.Results Among 1213 personnel,175(14.4％)cases had MAFLD,of which 141(80.6％)cases were mild,32(18.3％)were moderate,and 2(1.1％)were severe.The detection rates of MAFLD(25.6％[74/289]vs 10.9％[101/924])and overweight/obesity(55.7％[161/289]vs 37.7％[348/924])in age ≥ 30 years old were significantly higher than those in age＜30 years old(both P＜0.001).In people aged≥ 30 years old,compared with the non-MAFLD group,the BMI,WC,systolic blood pressure,diastolic blood pressure,triglyceride(TG),low density lipoprotein-cholesterol,alanine transaminase,aspartate transaminase,gamma glutamyltransferase and uric acid(UA)in the MAFLD group were significantly higher(all P＜0.05),and the high density lipoprotein-cholesterol(HDL-C)was significantly lower(P＜0.05).There were no significant differences in age,gender,fast blood glucose,total cholesterol,alkaline phosphatase,total bilirubin,serum creatinine,or blood urea nitrogen(all P＞0.05).Logistic regression analysis showed that WC was an independent risk factor for MAFLD(odds ratio[OR]=1.101,95％confidence interval[95％CI]1.030-1.176,P=0.004);HDL-C was an independent protective factor for MAFLD(OR=0.071,95％CI0.016-0.323,P=0.001);and BMI ≥24.0 kg/m2 and WC≥90 cm were positively correlated with MAFLD(both P＜0.01).In people aged≥30 years old,the risk of MAFLD was increased in those with overweight/obesity,arterial blood pressure≥ 130/85 mmHg(1 mmHg=0.133 kPa),TG≥1.7 mmol/L,HDL-C≤1.0 mmol/L and UA＞420 μmol/L(all P＜0.05),and the risk of MAFLD was most significantly increased in overweight/obesity people(hazard ratio[HR]=5.088,95％CI 2.724-9.504,P＜0.001).Among people aged＜30 years old,the risk of MAFLD was increased in those with overweight/obesity and UA＞420 μmol/L(both P＜0.01),and the risk of MAFLD was most significantly increased in overweight/obesity individuals(HR=6.305,95％CI3.973-10.006,P＜0.001).Conclusion The detection rates of MAFLD and various metabolic components are higher in the personnel on tropical islands,and the risk of MAFLD is higher in those with overweight/obesity,TG≥1.7 mmol/L and hyperuricemia.

BACKGROUND:With the continuous development of medical technology,the treatment of distal radius fractures is facing the need for more precise and personalized treatment.The traditional splint fixation method has some limitations in clinical application,which often has defects such as unstable fixation and easy to occur pressure sores.The validation of the improved 3D printed splint with rapid grid-free simulation is expected to lead to more accurate and effective treatment options for distal radius fractures.OBJECTIVE:To explore the design method of 3D printed splint for distal radius fracture based on clinical defect improvement and verify its clinical efficacy by rapid grid-free analysis.METHODS:Clinical defects of splint fixation of extended distal radius fracture were retrospectively analyzed,and 3D printed small splint was designed with specific improvement.The digital models of traditional splint and improved new 3D printed splint were made by Computer Aided Design drawing.Total,bone,soft tissue,and splint displacement and stress distribution were calculated through simulation analysis using rapid grid-free analysis tools.RESULTS AND CONCLUSION:(1)Compared with the traditional splint,the improved new 3D printing splint exerteded more balanced pressure on the skin without obvious stress concentration,and had better body surface adhesion.The displacement was smaller and the movement range was more reasonable.(2)An 3D printed splint based on clinical defect improvement can be designed.Rapid grid-free analysis verifies the advantages of the improved 3D splint,providing a basis for clinical application.

BACKGROUND:With the continuous development of medical technology,the treatment of distal radius fractures is facing the need for more precise and personalized treatment.The traditional splint fixation method has some limitations in clinical application,which often has defects such as unstable fixation and easy to occur pressure sores.The validation of the improved 3D printed splint with rapid grid-free simulation is expected to lead to more accurate and effective treatment options for distal radius fractures.OBJECTIVE:To explore the design method of 3D printed splint for distal radius fracture based on clinical defect improvement and verify its clinical efficacy by rapid grid-free analysis.METHODS:Clinical defects of splint fixation of extended distal radius fracture were retrospectively analyzed,and 3D printed small splint was designed with specific improvement.The digital models of traditional splint and improved new 3D printed splint were made by Computer Aided Design drawing.Total,bone,soft tissue,and splint displacement and stress distribution were calculated through simulation analysis using rapid grid-free analysis tools.RESULTS AND CONCLUSION:(1)Compared with the traditional splint,the improved new 3D printing splint exerteded more balanced pressure on the skin without obvious stress concentration,and had better body surface adhesion.The displacement was smaller and the movement range was more reasonable.(2)An 3D printed splint based on clinical defect improvement can be designed.Rapid grid-free analysis verifies the advantages of the improved 3D splint,providing a basis for clinical application.

Objective:To develop and evaluate the efficacy and safety of a three-dimensional (3D) digestive endoscope for gastric endoscopic submucosal dissection (ESD) through animal experiments.Methods:Two Dutch pigs were utilized from the Zhengzhou University Animal Experiment Center for the study. ESD procedures were performed by two senior endoscopists, one using 3D glasses and the other utilizing a 3D high-definition head display. The success of ESD was assessed based on predefined criteria, including completion of surgical steps, complete detachment of the presumptive lesion, and effective bleeding control during and after the surgery. The number of successful procedures and incidences of perforation were recorded. The stereoscopic experience of the endoscopists, including both the primary endoscopist and the assistant, was also evaluated. Furthermore, the assessment encompassed any reported symptoms of eye discomfort, such as eye fatigue, ocular pain, and blurred vision. Additionally, the confidence level of the endoscopists in the mechanical aspects of the operation, as well as encountered issues during the endoscopic procedures, were documented.Results:Two ESD were successful and no perforation occurred. Feedback from endoscopists suggested that 3D digestive endoscopy offered clear images with enhanced three-dimensionality during surgery, clear sense of distance and layering, allowing for a precise judgment of bleeding points, which surpassed 2D capabilities. No eye discomfort was experienced by endoscopists or assistants during or after the procedures. While endoscopists exhibited high confidence in 3D digestive endoscopy, they noted issues with image blurring when the camera was positioned less than 10 mm from the gastrointestinal tract wall.Conclusion:Preliminary results show that 3D digestive endoscopes can provide excellent stereo imaging, improved positioning accuracy, and safety during live animal stomach ESD procedures, without significantly increasing endoscopists' eye discomfort. Nevertheless, efforts are needed to address image blurring concerns when the camera is close to the gastrointestinal tract wall.

In the era of informatization, virtual teaching labs have emerged as a pivotal exploration in the construction of new teaching organizations at the primary level. Virtual labs of teaching research and reform require faculty members to collaboratively conduct teaching reform research and practice, thereby fostering new paradigms and achievements for teaching reforms. It serves as a vital foundation for supporting comprehensive reforms in curriculum teaching and specialty construction. This paper delves into the logical framework of virtual teaching research and reform labs from four dimensions (value orientation, construction principles, organizational structure, and operational safeguards), and elaborates on lab construction pathways from four aspects (technological platforms, behavioral relationships, knowledge management, and spiritual culture). Taking virtual teaching labs for medical education as an example, the paper summarizes practical experience in the innovative exploration of reform-oriented virtual teaching labs. Finally, we discuss the most constraining factors in the current construction of virtual teaching labs, and propose that research on virtual teaching labs should pay more attention to solving practical problems in major and curriculum reforms to promote the integration of medical education and practice, ultimately contributing to the realization of the Healthy China initiative.

Objective This study aims to discuss the research hotspot and development trend in the field of polycystic ovary syndrome(PCOS)through bibliometric statistics and visual analysis of long noncoding RNA(lncRNA)related studies.Methods Utilizing the Web of Science core database as the literature data source,we searched for PCOS lncRNA-related literature from 2015 to 2023.CiteSpace software was used to conduct a visual analysis,including the annual distribution,citation trends,countries,institutions,funding sources and key words,as well as co-occurrence and cluster analysis of key words.Results The visual analysis of 108 PCOS lncRNA literature revealed that China was the country with the highest number of publications.The first contributing institution was the Shandong University.The national natural science fund of China gave the biggest funding.The keyword cluster analysis suggested that PCOS lncRNA signal pathway regulation,related receptor activators,and the expression of regulatory factors were the research hotspots in ovary syndrome lncRNA research.Conclusion LncRNA related regulatory factors,bioinformatics analysis,and gene transcription in PCOS are new targetsfor PCOS treatment,providing valuable insights for clinical therapy and new strategies for the development of PCOS-related pharmaceuticals.

Objective:To explore the expression of family with sequence similarity 83 member A (FAM83A) in colorectal cancer, and the effect of FAM83A knockdown on the proliferation of colorectal cancer cells and the related mechanism.Methods:The expression of FAM83A in the tissues of 102 patients with colorectal cancer and its adjacent tissues was detected by immunohistochemistry. HCT116 cells were divided into experimental group and control group. The experimental group cells were transfected with FAM83A-siRNA plasmid, and the control group cells were transfected with MOCK-siRNA plasmid. The mRNA content of FAM83A in each group was detected by fluorescence quantitative PCR. The expressions of FAM83A, P13K, p-AKT and p-mTOR in each group were detected by Western blot. CCK8 assay and clonogenesis assay were used to detect cell proliferation.Results:The positive rate of FAM83A in colorectal cancer patients was 88.23% (90 cases /102 cases), and the expression rate of FAM83A in paracancer tissues was 10.78% (11 cases /102 cases). The expression rate of Fam83a in colorectal cancer tissues was significantly higher than that in paracancer tissues, with statistical significance ( P<0.001). After siRNA transfection, the mRNA expression levels of FAM83A in HCT116 cells of the experimental group and control group were 1.23±0.20 and 0.43±0.12, respectively, and the protein expression levels of FAM83A were 1.19±0.11 and 0.23±0.08, respectively. The expression levels of P13K were 1.21±0.17 and 0.28±0.09, the expression levels of p-AKT were 1.35±0.23 and 0.57±0.18, and the expression levels of p-mTOR were 1.48±0.20 and 1.05±0.14. The expression of P13K, p-Akt and p-mTOR was down-regulated (all P<0.05). The absorbance of HCT116 cells in the experimental group and the control group was 1.09±0.22 and 2.21±0.27, respectively. The cloning rate of HCT116 cells in the experimental group and the control group was 21.6%±2.4% and 62.7%±4.1%, respectively. The proliferation ability of HCT116 cells in the experimental group decreased significantly ( P<0.05) . Conclusions:The expression of FAM83A is significantly increased in colorectal cancer tissues, which may be related to the malignant degree of colorectal cancer. FAM83A affects the proliferation of colorectal cancer cells through the P13K/AKT/mTOR signaling pathway.

Objective:To develop a robotic digestive endoscope system (RDES) and to evaluate its feasibility, safety and control performance by experiments.Methods:The RDES was designed based on the master-slave control system, which consisted of 3 parts: the integrated endoscope, including a knob and button robotic control system integrated with a gastroscope; the robotic mechanical arm system, including the base and arm, as well as the endoscopic advance-retreat control device (force-feedback function was designed) and the endoscopic axial rotation control device; the control console, including a master manipulator and an image monitor. The operator sit far away from the endoscope and controlled the master manipulator to bend the end of the endoscope and to control advance, retract and rotation of the endoscope. The air supply, water supply, suction, figure fixing and motion scaling switching was realized by pressing buttons on the master manipulator. In the endoscopy experiments performed on live pigs, 5 physicians each were in the beginner and advanced groups. Each operator operated RDES and traditional endoscope (2 weeks interval) to perform porcine gastroscopy 6 times, comparing the examination time. In the experiment of endoscopic circle drawing on the inner wall of the simulated stomach model, each operator in the two groups operated RDES 1∶1 motion scaling, 5∶1 motion scaling and ordinary endoscope to complete endoscopic circle drawing 6 times, comparing the completion time, accuracy (i.e. trajectory deviation) and workload.Results:RDES was operated normally with good force feedback function. All porcine in vivo gastroscopies were successful, without mucosal injury, bleeding or perforation. In beginner and advanced groups, the examination time of both RDES and ordinary endoscopy tended to decrease as the number of operations increased, but the decrease in time was greater for operating RDES than for operating ordinary endoscope (beginner group P=0.033; advanced group P=0.023). In the beginner group, the operators operating RDES with 1∶1 motion scaling or 5∶1 motion scaling to complete endoscopic circle drawing had shorter completion time [1.68 (1.40, 2.17) min, 1.73 (1.47, 2.37) min VS 4.13 (2.27, 5.16) min, H=32.506, P<0.001], better trajectory deviation (0.50±0.11 mm, 0.46±0.11 mm VS 0.82±0.26 mm, F=38.999, P<0.001], and less workload [42.00 (30.00, 50.33) points, 43.33 (35.33, 54.00) points VS 52.67 (48.67, 63.33) points, H=20.056, P<0.001] than operating ordinary endoscope. In the advanced group, the operators operating RDES with 1∶1 or 5∶1 motion scaling to complete endoscopic circle drawing had longer completion time than operating ordinary endoscope [1.72 (1.37, 2.53) min, 1.57 (1.25, 2.58) min VS 1.15 (0.86, 1.58) min, H=13.233, P=0.001], but trajectory deviation [0.47 (0.13, 0.57) mm, 0.44 (0.39, 0.58) mm VS 0.52 (0.42, 0.59) mm, H=3.202, P=0.202] and workload (44.62±21.77 points, 41.24±12.57 points VS 44.71±17.92 points, F=0.369, P=0.693) were not different from those of the ordinary endoscope. Conclusion:The RDES enables remote control, greatly reducing the endoscopists' workload. Additionally, it gives full play to the cooperative motion function of the large and small endoscopic knobs, making the control more flexible. Finally, it increases motion scaling switching function to make the control of endoscope more flexible and more accurate. It is also easy for beginners to learn and master, and can shorten the training period. So it can provide the possibility of remote endoscopic control and fully automated robotic endoscope.

Childhood obesity has become a global public health problem, and its incidence and development are closely related to the exposure to risk factors in early life. In recent years, more and more epidemiological research evidences have shown that breastfeeding has the modification effect on early life risk factors of childhood obesity, such as high genetic risk of obesity, maternal gestational diabetes mellitus, macrosomia and other factors. This paper reviews the research results in this field, and summarizes the modification effect of breastfeeding on childhood obesity heredity and early life environmental risk factors associated with childhood obesity, to provide a reference for the evaluation of positive effect of breastfeeding on prevention and control of obesity in specific risk groups for taking targeted measure to reduce the risk for childhood obesity.

Humans ; Consensus ; Pancreatic Neoplasms/therapy* ; Neuroendocrine Tumors/therapy*