BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

OBJECTIVE: To evaluate the clinical efficacy of ultrasound-guided needle knife release with different pathways for carpal tunnel syndrome (CTS). METHODS: Sixty CTS patients were randomly divided into a transverse group and a longitudinal group, with 30 patients in each group. The transverse group received the needle knife release under ultrasound above and below the median nerve along the short axis, while the longitudinal group received the needle knife release under ultrasound above the median nerve along the long axis. The patients' visual analogue scale (VAS) scores, Levine scores, and median nerve cross-section area (CSA) were assessed before treatment, on the 7th, 14th, and 30th days after treatment. The median nerve conduction indexes (motor conduction: latency [Lat], amplitude[Amp], motor conduction velocity [MCV]; sensory conduction: Lat, Amp, sensory conduction velocity [SCV]) were evaluated before treatment and on the 30th day after treatment. RESULTS: Compared before treatment, the VAS scores, Levine scores, and median nerve CSA were reduced in both groups on the 7th, 14th, and 30th days after treatment (P<0.05); the transverse group showed lower VAS and Levine scores and smaller CSA than those in the longitudinal group (P<0.05). On the 30th day after treatment, motor and sensory Lat was reduced (P<0.05), motor and sensory Amp was increased (P<0.05), and MCV and SCV were faster (P<0.05) in both groups. The transverse group had shorter Lat, higher Amp, and faster MCV and SCV than those in the longitudinal group (P<0.05). CONCLUSION The ultrasound-guided needle knife release with transverse and longitudinal pathways could both effectively alleviate pain and improve median nerve conduction in CTS patients, with the transverse pathway showing superior efficacy to longitudinal pathway.
Humans ; Carpal Tunnel Syndrome/therapy* ; Female ; Middle Aged ; Male ; Adult ; Median Nerve/physiopathology* ; Acupuncture Therapy/instrumentation* ; Treatment Outcome ; Neural Conduction ; Aged ; Ultrasonography

Polysaccharides, a class of complex macromolecules, are distinguished by their diverse biological functions and essential role in functional foods. The distinctive biological activities of polysaccharides from medicine and food homology materials (MFPs), including immunomodulation, carbohydrate metabolism regulation, and lipid metabolism regulation properties, have attracted considerable scientific attention. The relationship between polysaccharides and gut microbiota is fundamental to human health, as polysaccharides demonstrate efficacy in ameliorating various conditions-from inflammatory bowel disease (IBD) to obesity and diabetes-through their influence on intestinal flora composition and diversity. Although polysaccharide research and applications show promise, significant challenges persist, particularly regarding extraction and purification methodologies, and the complete understanding of their biological mechanisms. Future investigations should prioritize understanding the correlation between polysaccharide structure and function, advancing large-scale production and application technologies, and establishing productive interdisciplinary collaborations. MFPs demonstrate significant potential for advancing sustainable development and human health, building upon current research findings. This paper presents a comprehensive review of global developments in the extraction, purification, structural characterization, biological activities, and applications of MFPs, emphasizing opportunities for scientific and technological innovations in specialized dietary food development.
Polysaccharides/isolation & purification* ; Humans ; Functional Food/analysis* ; Gastrointestinal Microbiome/drug effects* ; Animals

Objective To investigate the effects of high-risk human papillomavirus 16 E6 protein(HPV16 E6 protein)on invasion and migration of cervical cancer SiHa cells via regulating the expression of expression miR-23a.Methods Tissue samples from 100 patients with cervical cancer HPV-negative,100 HPV-positive patients,and 100 paracancerous normal tissues were collected;cervical cancer SiHa cells were divided into blank group,E6 overexpression group,negative transfection group,and E6 + miR-23a mimics group.The expression of miR-23a and HPV16 E6 mRNA were detected by qRT-PCR;MTT assay was used to detect the cell proliferation inhibition rate;flow cytometry to detect the apoptosis;Transwell chamber assay to detect cell invasion,and scratch test to detect the ability of cell migration.The expression of HPV16 E6,apoptosis related proteins(Caspase-3,Bax,Bcl-2),and migration related proteins(MMP-2,MMP-9)was detected by WB.Results The expression level of miR-23a was decreased in cervical cancer tissues,and that was lower in HPV positive cervical cancer tissues.Overexpression of E6 decreased the expression level of miR-23a,cell proliferation inhibition rate,apoptosis rate,Caspase-3 and Bax protein expression,and increased the expression of Bcl-2 protein,scratch healing rate,inva-sion cell number,MMP-2,MMP-9 protein expression(P<0.05);miR-23a mimics reversed the effects of E6 overexpression on the above indicators.Conclusion HPV16 E6 promotes the invasion and migration of cervical cancer cells,which may be related to the regulation of miR-23a expression.

BACKGROUND:With social progress,the incidence rate of knee osteoarthritis is getting higher and higher in the face of the rapidly developing aging problem in the social population,and the number of total knee replacement operations is gradually increasing. OBJECTIVE:To study the relationship between prosthesis size and stress shielding by improving the tibial prosthesis base. METHODS:A female patient with severe knee osteoarthritis was selected.Based on Mimics,through extracting the bone structure of the knee joint and simulating the total knee replacement surgery,osteotomy,positioning,and implantation operations were carried out to establish the geometric modeling of the total knee replacement prosthesis(including the femoral prosthesis,tibial bracket,and tibial pad),and improve the design of the tibial prosthesis base,analyze the effect of different tibial prosthesis bases on stress shielding of surrounding bone tissue. RESULTS AND CONCLUSION:(1)Compared with single-stem tibial intramedullary stem prosthesis,the design of four-post tibial intramedullary stem prosthesis created a certain degree of stress shielding around the short stem.However,compared with a thicker single long stem,this stress shielding effect was significantly reduced,and the load was evenly distributed among the four short stems,so there was no stress concentration at the bottom of the pile.(2)The design with a rectangular hole in the middle not only provided relatively good stability,but also helped to reduce stress shielding of cancellous bone to a certain extent,with a reduction rate of 77.5%.(3)Compared with a single-stem tibial intramedullary stem prosthesis,both the four-post tibial intramedullary stem prosthesis and the four-post tibial intramedullary stem prosthesis with a hole in the middle have good stability,which can reduce stress shielding to a certain extent without causing stress concentration,providing theoretical guidance for the design of the tibial intramedullary stem.