OBJECTIVE: To investigate the safety and prognostic factors influencing the treatment of upper urinary tract urothelial carcinoma (UTUC) combined with bladder cancer (BCa) by laparoscopic simultaneous radical cystectomy and nephroureterectomy (RCNU). METHODS: The clinical data of patients admitted to Peking University Third Hospital for laparoscopic RCNU surgery from January 2009 to September 2023 were analyzed retrospectively. Based on the same gender, age (±5 years), history of uroepithelial tumors, underlying diseases, T-stage, N-stage, M-stage, American Society of Anesthesiologists (ASA) score, Charlson comorbidity index, and body mass index (BMI) (±5), 34 patients with RCNU were matched 1 ∶1 with patients with bladder cancer who underwent laparoscopic radical cystectomy (RC) alone. Kaplan-Meier survival analysis was used to calculate patient survival, and Cox proportional regression risk model was used to analyze clinical factors affecting prognosis. RESULTS: Of the 68 patients enrolled, the follow-up rate was 100% with a median follow-up time of 27.0 (11.7, 60.2) months. Comparison of intraoperative conditions (including operation time, estimated intraoperative bleeding, intra-operative blood transfusion, etc.) between the two groups of patients showed no significant difference (P>0.05). Comparison of preoperative creatinine and postoperative creatinine between the two groups of patients showed significant differences (P < 0.05). The perioperative Clavien grade Ⅲ-Ⅳ complication rates were 2.9% (1/34) in the RC group and 5.9% (2/34) in the RCNU group. There was no significant difference in terms of perioperative complications between the two groups. Overall survival was significantly lower in the patients receiving RCNU compared with the matched group receiving RC alone (P < 0.05). Cox regression analysis suggested that two factors, high N stage and high postoperative creatinine, were independent risk factors affecting the prognosis of patients in the 2 groups (P < 0.05). CONCLUSION The overall survival prognosis of patients undergoing RCNU surgery was worse compared with laparoscopic RC surgery alone during the same period. There was no clinically significant difference between the two groups in terms of operation time, intraoperative bleeding, and perioperative complications, and there were clinically significant differences in preoperative renal function and post-operative renal function.
Humans ; Laparoscopy/methods* ; Nephroureterectomy/methods* ; Cystectomy/methods* ; Prognosis ; Male ; Retrospective Studies ; Female ; Urinary Bladder Neoplasms/mortality* ; Middle Aged ; Aged

Iron overload is strongly associated with heart disease. Ferroptosis is a new form of regulated cell death indicated in cardiac ischemia-reperfusion (I/R) injury. However, the specific molecular mechanism of myocardial injury caused by iron overload in the heart is still unclear, and the involvement of ferroptosis in iron overload-induced myocardial injury is not fully understood. In this study, we observed that ferroptosis participated in developing of iron overload and I/R-induced cardiomyopathy. Mechanistically, we discovered that Parkin inhibited iron overload-induced ferroptosis in cardiomyocytes by promoting the ubiquitination of long-chain acyl-CoA synthetase 4 (ACSL4), a crucial protein involved in ferroptosis-related lipid metabolism pathways. Additionally, we identified p53 as a transcription factor that transcriptionally suppressed Parkin expression in iron-overloaded cardiomyocytes, thereby regulating iron overload-induced ferroptosis. In animal studies, cardiac-specific Parkin knockout mice (Myh6-CreER ^T2 /Parkin ^fl/fl ) fed a high-iron diet presented more severe myocardial damage, and the high iron levels exacerbated myocardial I/R injury. However, the ferroptosis inhibitor Fer-1 significantly suppressed iron overload-induced ferroptosis and myocardial I/R injury. Moreover, Parkin effectively protected against impaired mitochondrial function and prevented iron overload-induced mitochondrial lipid peroxidation. These findings unveil a novel regulatory pathway involving p53-Parkin-ACSL4 in heart disease by inhibiting of ferroptosis.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Ischemic heart disease (IHD) is associated with high morbidity and mortality rates. Reperfusion therapy is the best treatment option for this condition. However, reperfusion can aggravate myocardial damage through a phenomenon known as myocardial ischemia/reperfusion (I/R) injury, which has recently gained the attention of researchers. Several studies have shown that Chinese herbal medicines and their natural monomeric components exert therapeutic effects against I/R injury. This review outlines the current knowledge on the pathological mechanisms through which mitochondria participate in I/R injury, focusing on the issues related to energy metabolism, mitochondrial quality control disorders, oxidative stress, and calcium. The mechanisms by which mitochondria mediate cell death have also been discussed. To develop a resource for the prevention and management of clinical myocardial I/R damage, we compiled the most recent research on the effects of Chinese herbal remedies and their monomer components.

Traditional Chinese medicine (TCM) has become an important treasure trove of natural resources for the development of new medicines due to their diverse compositions, significant therapeutic effects, and few side effects. The screening of active ingredients in TCM represents a crucial step in elucidating the material basis and mechanism of action of TCM. At present, efficient and precise molecular recognition techniques based on intermolecular interactions have been extensively employed for the identification of active ingredients in TCM. This paper presents a review of the fundamental principles underlying solution-phase/affinity ligand fishing, solid-phase/affinity ligand fishing, molecular imprinting and molecular docking techniques, with a particular focus on their applications in the screening of active ingredients in TCM. Furthermore, the paper compares the advantages and disadvantages of the various techniques and identifies the limitations of existing techniques. In conclusion, the paper identifies the prospective trajectory of molecular recognition techniques in the domain of TCM research. This paper not only provides theoretical references for the development of new methods of active ingredient screening but also helps to promote the modernization and internationalization of TCM.

To introduce a case of local skin necrosis by hematoma after alar reduction. A 20-year-old female patient underwent comprehensive rhinoplasty with ear cartilage paddind nose tipand and alar reduction. After 7 days, the right nasal alar wound was covered with blood scabs, and poorly healed. Debridement and suturing were performed. On the 7th day after debridement, there was sudden blackening of the incision edge which enlarged the area. The patient was treated with dressing change for 18 days but did not improve. She came to the First Affiliated Hospital of Guangxi University of Chinese Medicine for treatment. The hematoma was cleared and the bleeding points were explored. After multiple routine dressing changes, the skin on the wound edge became necrotic, turning black and dry before removal. After 25 days of dressing changes, no skin flap repair was performed, and the wound healed without obvious scars. The nose was basically on the opposite side. Therefore, attention should also be paid to preventing hematoma during alar reduction. For small amounts of hematoma in special areas, timely treatment should be taken to avoid skin necrosis and ulceration.

To introduce a case of local skin necrosis by hematoma after alar reduction. A 20-year-old female patient underwent comprehensive rhinoplasty with ear cartilage paddind nose tipand and alar reduction. After 7 days, the right nasal alar wound was covered with blood scabs, and poorly healed. Debridement and suturing were performed. On the 7th day after debridement, there was sudden blackening of the incision edge which enlarged the area. The patient was treated with dressing change for 18 days but did not improve. She came to the First Affiliated Hospital of Guangxi University of Chinese Medicine for treatment. The hematoma was cleared and the bleeding points were explored. After multiple routine dressing changes, the skin on the wound edge became necrotic, turning black and dry before removal. After 25 days of dressing changes, no skin flap repair was performed, and the wound healed without obvious scars. The nose was basically on the opposite side. Therefore, attention should also be paid to preventing hematoma during alar reduction. For small amounts of hematoma in special areas, timely treatment should be taken to avoid skin necrosis and ulceration.

This study included 116 professional postgraduate students majoring in clinical surgery who rotated in the Department of Breast and Thyroid Surgery of The First Affiliated Hospital of Army Medical University from 2019 to 2022. The students were provided with open online courses on precision medicine to build a strong theoretical foundation for evidence-based medicine; subsequently, precision medicine courses focusing on thyroid surgery were offered; and multidisciplinary team rounds for typical and difficult-to-diagnose cases were organized. Taking thyroid cancer as an example, questionnaire surveys and typical clinical case assessment were conducted to compare the scientific research and professional competencies of the students before and after evidence-based medicine education. The results showed that the students had significantly improved ability to use academic databases to acquire professional knowledge and solve problems, and showed increased enthusiasm in class, believing that the teaching content was easy to absorb and moderate in difficulty and the teaching effect was good.

AIM:To investigate the interaction mechanisms of estrogen receptor β(ERβ),nuclear factor-κB(NF-κB)and activator protein-1(AP-1)in colorectal cancer by analyzing the transcriptome data after tumor necrosis fac-tor α(TNF-α)treatment and combining it with NF-κB/p65 and ERβ cistrome data in colon cancer cell lines HT29 and SW480.METHODS:The TNF-α transcriptome was integrated with p65 and ERβ cistrome data.Protein interaction net-works of TNF-α,NF-κB/p65 and ERβ were constructed in colon cancer cell lines HT29 and SW480 using R.RE-SULTS:TNF-α regulated genes through p65 DNA binding,which were mainly enriched in the NF-κB and mitogen-acti-vated protein kinase(MAPK)pathways.Components of the NF-κB/p65 and MAPK pathways had potential interactions with AP-1 family proteins.ERβ overexpression did not significantly affect TNF-α-mediated gene regulation but may regu-late AP-1 activity through the MAPK and phosphatidylinositol 3-kinase(PI3K)/Akt pathways.Furthermore,ERβ de-creased p65 DNA binding sites in HT29 but increased p65 binding sites in SW480,suggesting cell line-specific regulation of NF-κB by ERβ.CONCLUSION:In colorectal cancer,NF-κB,ERβ and AP-1 have potential interactions:TNF-α can regulate AP-1 through NF-κB,while ERβ overexpression can alter NF-κB-mediated regulation,and the influence of ERβ on NF-κB may be gender-related.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.