AIM: To assess the accuracy of predicting intraocular lens(IOL)power after myopic refractive surgery using the Pentacam system's true net power(TNP)in the 3 mm zone combined with the SRK/T formula [i.e. TNP 3 mm(SRK/T)].METHODS: Retrospective study. This study enrolled 35 cases(50 eyes)of patients undergoing cataract surgery after laser assisted in situ keratomileusis(LASIK)or photorefractive keratectomy(PRK)from July 2019 to December 2021. Preoperatively, IOL power of 50 eyes, 34 eyes and 41 eyes was calculated by TNP 3 mm(SRK/T), Barrett True-K and Olsen 2 formulas, respectively, with at least 2 formulas used to calculate IOL power for each patient. The actual diopter was recorded 3 mo postoperatively. Prediction errors(PE)of IOL power were compared among the three calculation methods, and the proportion of eyes with PE within ±0.5 D and ±1.0 D was analyzed.RESULTS: The PE at 3 mo postoperatively for TNP 3 mm(SRK/T), Barrett True-K, and Olsen 2 was -0.02±0.63, -0.54±0.80, and 0.25±0.80 D, respectively(P<0.001). The proportions of PE within ±0.5 D were 66%(33/50), 44%(15/34)and 37%(15/41), respectively(P<0.05); the proportions of PE within ±1.0 D were 88%(44/50), 71%(24/34)and 80%(33/41), respectively(P>0.05).CONCLUSION: The Pentacam TNP 3 mm(SRK/T)method is simple to operate and provides accurate calculation of IOL power after corneal refractive surgery.

Ferroptosis, a new form of programmed cell death marked by iron-dependent phospholipid peroxidation, is regulated by complex cellular metabolic pathways, including iron metabolism, lipid metabolism, and oxidation-reduction system, is associated with many organ injuries and degeneration, and has great potential in the treatment of ischemic diseases and lipid peroxide-related degenerative diseases. Myocardial ischemia reperfusion injury (MIRI) is the most common cause of death in patients with acute myocardial infarction after revascularization therapy. Recent studies have shown that ferroptosis is intimately related to the pathological process of MIRI. Ferroptosis is associated with MIRI through oxidative stress, iron metabolism, lipid metabolism, endoplasmic reticulum stress and inflammatory response. Intervention of ferroptosis during reperfusion can effectively improve cardiac function and reduce myocardial infarct size. In this paper, the research progress was explored between ferroptosis and MIRI, and the specific role of ferroptosis in MIRI was discussed.

Objective    To provide experimental data and theoretical support for further studying the maturity of cardiac patches in other in vitro experiments and the safety in other in vivo animal experiments, through standard chemically defined and small molecule-based induction protocol (CDM3) for promoting the differentiation of human induced pluripotent stem cells (hiPSCs) into myocardium, and preliminarily preparing cardiac patches. Methods    After resuscitation, culture and identification of hiPSCs, they were inoculated on the matrigel-coated polycaprolactone (PCL). After 24 hours, the cell growth was observed by DAPI fluorescence under a fluorescence microscope, and the stemness of hiPSCs was identified by OCT4 fluorescence. After fixation, electron microscope scanning was performed to observe the cell morphology on the surface of the patch. On the 1st, 3rd, 5th, and 7th days of culture, the cell viability was determined by CCK-8 method, and the growth curve was drawn to observe the cell growth and proliferation. After co-cultured with matrigel-coated PCL for 24 hours, hiPSCs were divided into a control group and a CDM3 group, and continued to culture for 6 days. On the 8th day, the cell growth was observed by DAPI fluorescence under a fluorescence microscope, and hiPSCs stemness was identified by OCT4 fluorescence, and cTnT and α-actin for cardiomyocyte marker identification. Results    Immunofluorescence of hiPSCs co-cultured with matrigel-coated PCL for 24 hours showed that OCT4 emitted green fluorescence, and hiPSCs remained stemness on matrigel-coated PCL scaffolds. DAPI emitted blue fluorescence: cells grew clonally with uniform cell morphology. Scanning electron microscope showed that hiPSCs adhered and grew on matrigel-coated PCL, the cell outline was clearly visible, and the morphology was normal. The cell viability assay by CCK-8 method showed that hiPSCs proliferated and grew on PCL scaffolds coated with matrigel. After 6 days of culture in the control group and the CDM3 group, immunofluorescence showed that the hiPSCs in the control group highly expressed the stem cell stemness marker OCT4, but did not express the cardiac markers cTnT and α-actin. The CDM3 group obviously expressed the cardiac markers cTnT and α-actin, but did not express the stem cell stemness marker OCT4. Conclusion    hiPSCs can proliferate and grow on matrigel-coated PCL. Under the influence of CDM3, hiPSCs can be differentiated into cardiomyocyte-like cells, and the preliminary preparation of cardiac patch can provide a better treatment method for further clinical treatment of cardiac infarction.

With the increasing popularity of dental implants, prevalence of peri-implantitishas also been increasing in recent years. However, a deeper understanding of the pathogenesis of peri-implantitis is still lacking. Animal models are a good bridge for studying the pathogenesis of clinical diseases. Animals such as mini-pigs, canines, non-human primates and rodents are used to construct animal models of peri-implantitis. Among them, rodents are easy to obtain and feed, and have a wide range of applications for research. In this review, we summarize the construction of rodent modelswithperi-implantitis as well as the research progress and applications.

ObjectiveTo review the classification of orthopedic insoles, common techniques of 3D printing orthopedic insoles, common materials and their application for flatfoot. MethodsLiteratures were retrieved from PubMed, Web of Science, CNKI and Wanfang Data from 2012 to 2022, and the relevant contents were summarized. ResultsA total of ten studies were finally included, from 5 countries, involving 290 participants, which published from 2019 to 2022. Orthotic insoles were classified as prefabricated, semi-custom, and custom, while custom ones were classified as traditional custom and 3D printed custom. 3D printed orthotic insoles were often made with selective laser sintering, fused deposition modeling (FDM) and PolyJet printing technologies, and commonly used materials included ethylene-vinyl acetate (EVA), polylactic acid, thermoplastic polyurethane, polyamide, and polypropylene. For flatfoot, 3D printed orthotic insoles could improve plantar pressure, relieve foot pain and the combined use of insole posting could control rearfoot valgus. Conclusion3D printed custom insoles can be made more efficiently and accurately than traditional custom insoles. The printing technologies and materials often chosen for 3D printed orthotic insoles are mainly FDM and EVA. 3D printed orthotic insoles is effective on plantar pressure, comfort and foot movement function of flatfoot.

Objective: To understand the incidence and mortality of drowning and secular trend among children aged 0-14 from 1990 to 2019 in China, so as to provide reference for drowning intervention among children in China. Methods: Based on data of drowning incidence and death in 0-14 years old children in China in 1990-2019 years Global Burden of Disease (GBD 2019) database, the standardized rate was calculated by the world standard population, and the trend of incidence rate and mortality rate was fitted by Joinpoint regression model respectively. Results: From 1990 to 2019, the overall incidence of drowning among children aged 0-14 years in China decreased from 37.17/100 000 to 12.54/100 000, a relative decrease of 66.26%; the standardized incidence rate decreased from 21.78/100 000 to 14.98/100 000, a relative decrease of 31.22%. The incidence rate and standardized incidence rate of drowning in children showed an increasing after decreasing trend, with decreasing mortality and standardized mortality rate. Joinpoint regression showed that the incidence rate of standardized AAPC for child drowning was -1.3, -2.5 for males and 0 for females. The overall standardized mortality rate of drowning was -3.9, male was -3.6, female was about -4.5 , the trend changes were statistically significant ( P <0.05). The incidence rate and mortality rate of male were higher than that of female, and there was significant difference between male and female groups ( P <0.05). Conclusion Significant progress has been made in child drowning prevention and control, with substantial decreasing in the incidence rate of child drowning. However, considering recent slight increase in drowning incidence, effective measures should be developmed including risk factors, vulnerable population to further control the incidence and mortality of child drowning.

Objective To study topological structure of a new type of three-dimensional (3D) printed height increasing insoles for leg length discrepancy (LLD) and its effect on biomechanics of lower limbs. Methods Topological structure for middle and rear part of the insole was optimized by solid isotropic microstructures with penalization (SIMP), the force was loaded and the boundary conditions were set according to force area of the insole, and the height increasing insole with thermoplastic polyurethanes (TPU) materials was printed by selected laser sintering (SLS). The insoles were used in 9 patients with LLD, visual analogue scale (VAS) and Maryland foot function scores were used to compare pain and foot function changes of patients before and after using the insole, and the 3D gait analysis system was used to compare spatiotemporal parameters and vertical ground reaction force (vGRF) of both lower limbs. Result sAfter the patient wore 3D printed insole, VAS scores decreased, Maryland foot function scores increased, vGRF of both lower limbs decreased, and the difference of cadence, stance phase and swing phase in both lower limbs decreased. Conclusions The 3D printed height increasing insole after topology optimization can improve coordination of lower limb movement, reduce ground impact, relieve pain and improve foot function, thus providing an effective personalized orthopedic plan for LLD treatment in clinic.

Objective: To systematically evaluate the acceptance of pre-exposure prophylaxis (PrEP)among men who have sex with men (MSM) in China, so as to provide reference for the promotion of preventive drug use before human immunodeficiency virus exposure in China. Methods: By searching the databases of China national knowledge infrastructure, VIP database, Wanfan knowledge service platform, PubMed, Web of Science, Embase and The Cochrane Library with key words of "men who have sex with men" "pre-exposure prophylaxis" "PrEP" and "MSM". The literature on the willingness of Chinese MSM population to accept PrEP was systematically collected, and the data of the literature meeting the inclusion criteria were extracted for Meta analysis. Results: A total of 12 articles were selected in this study, including 6 articles in English and 6 in Chinese. The score of bias risk assessment of eligible articles was 14-18, which was more than 70% of the total score. The total number of samples was 11 269. The overall acceptance rate of PrEP was 0.77(95%CI:0.71-0.82). In subgroup analysis, the acceptance rates of different nationalities, marriage, household registration, age, education background, income, sexual orientation, sexual behavior and awareness of PrEP were statistically significant. Conclusion: In general, the acceptance rate of PrEP in MSM population is higher, but the awareness rate is low. There are differences in the acceptance rate among different groups.
China/epidemiology* ; Female ; HIV Infections/prevention & control* ; Health Knowledge, Attitudes, Practice ; Homosexuality, Male ; Humans ; Male ; Patient Acceptance of Health Care ; Pre-Exposure Prophylaxis ; Sexual Behavior ; Sexual and Gender Minorities

As a key regulatory element of gene differential expression, enhancer plays a crucial role in craniomaxillofacial development through regulating the spatiotemporal expression of target genes to promote tissue-specific differentiation. With the development of CRISPR and chromosome conformation capture technique, the function of enhancer and its regulatory mechanism has been explored in depth. This paper gave a systematic review on the mechanism of enhancer regulating target gene expression and the role of enhancer in oral craniofacial development and malformation.
Animals ; Enhancer Elements, Genetic ; Mammals/genetics*

Objective: To understand pneumonia mortality in children aged 0-14 years in China in recent 15 years, and to provide reference for child pneumonia prevention and treatment. Methods: Based on the death data from China Statistical Yearbook 2005-2019, pneumonia mortality in urban and rural children aged 0-14 was extracted and the standardized mortality was calculated, and the trend of mortality was fitted by Joinpoint regression model. Results: The crude mortality rate of child pneumonia in urban and rural areas showed an increasing trend, while the standardized mortality rate showed a fluctuating downward trend. Joinpoint regression showed that the mortality rate of pneumonia in urban and rural children showed a monotonous downward trend, and there was no turning point. The overall APC of pneumonia mortality of urban children was -3.4, that of boys and girls were both -3.5. Trend for annual changes in urban areas were found significant among total sample and boys (both P <0.05). The overall APC of pneumonia mortality in rural children was -7.8, that of boys and girls were -7.1 and -7.8, respectively. Trend for annual changes in rural areas were found significant among total sample and boys(both P <0.05). There was no significant differences in the trend of mortality between urban and rural groups. Conclusion During 2005 to 2019, child pneumonia mortality in urban and rural areas in China shows a downward trend, which is relatively balanced in urban and rural areas. Further strengthened pediatric pneumonia treatment and management are expected to reduce the pneumonia mortality.