BACKGROUND: Both medication and non-medication therapies are effective approaches to control blood pressure (BP) in hypertension patients. However, the association of joint changes in antihypertensive medication use and healthy lifestyle index (HLI) with BP control among hypertension patients is seldom reported, which needs to provide more evidence by prospective intervention studies. We examined the association of antihypertensive medication use and HLI with BP control among employees with hypertension in China based on a workplace-based multicomponent intervention program. METHODS: Between January 2013 and December 2014, a cluster randomized clinical trial of a workplace-based multicomponent intervention program was conducted in 60 workplaces across 20 urban areas in China. Workplaces were randomly divided into intervention (n = 40) and control (n = 20) groups. Basic information on employees at each workplace was collected by trained professionals, including sociodemographic characteristics, medical history, family history, lifestyle behaviors, medication status and physical measurements. After baseline, the intervention group received a 2-year intervention to achieve BP control, which included: (1) a workplace wellness program for all employees; (2) a guidelines-oriented hypertension management protocol. HLI including nonsmoking, nondrinking, adequate physical activity, weight within reference range and balanced diet, were coded on a 5-point scale (range: 0-5, with higher score indicating a healthier lifestyle). Antihypertensive medication use was defined as taking drug within the last 2 weeks. Changes in HLI, antihypertensive medication use and BP control from baseline to 24 months were measured after the intervention. RESULTS: Overall, 4655 employees were included (age: 46.3 ± 7.6 years, men: 3547 (82.3%)). After 24 months of the intervention, there was a significant improvement in lifestyle [smoking (OR = 0.65, 95% CI: 0.43-0.99; P = 0.045), drinking (OR = 0.52, 95% CI: 0.40-0.68; P < 0.001), regular exercise (OR = 3.10, 95% CI: 2.53-3.78; P < 0.001), excessive intake of fatty food (OR = 0.17, 95% CI: 0.06-0.52; P = 0.002), restrictive use of salt (OR = 0.26, 95% CI: 0.12-0.56; P = 0.001)]. Compare to employees with a deteriorating lifestyle after the intervention, those with an improved lifestyle had a higher BP control. In the intervention group, compared with employees not using antihypertensive medication, those who consistent used (OR = 2.34; 95% CI: 1.16-4.72; P = 0.017) or changed from not using to using antihypertensive medication (OR = 2.24; 95% CI: 1.08-4.62; P = 0.030) had higher BP control. Compared with those having lower HLI, participants with a same (OR = 1.38; 95% CI: 0.99-1.93; P = 0.056) or high (OR = 1.79; 95% CI: 1.27~2.53; P < 0.001) HLI had higher BP control. Those who used antihypertensive medication and had a high HLI had the highest BP control (OR = 1.88; 95% CI: 1.32-2.67, P < 0.001). Subgroup analysis also showed the consistent effect as the above. CONCLUSION These findings suggest that adherence to antihypertensive medication treatment and healthy lifestyle were associated with a significant improvement in BP control among employees with hypertension.

Biomolecular condensates are formed through phase separation of biomacromolecules such as proteins and RNAs. These condensates exhibit liquid-like properties that can futher transition into more stable material states. They form complex internal structures via multivalent weak interactions, enabling precise spatiotemporal regulations. However, the use of inconsistent and non-standardized terminology has become increasingly problematic, hindering academic exchange and the dissemination of scientific knowledge. Therefore, it is necessary to discuss the terminology related to biomolecular condensates in order to clarify concepts, promote interdisciplinary cooperation, enhance research efficiency, and support the healthy development of this field.

AIM:To investigate the value of optical coherence tomography angiography(OCTA)indicators in the diagnosis of diabetic retinopathy(DR), and to provide patients with diabetic nephropathy(DN)with more sensitive OCTA screening indicators to detect concurrent DR at an early stage.METHODS: A total of 200 patients who treated in the ophthalmology department of the Seventh Affiliated Hospital, Sun Yat-sen University from 2022 to 2023 were included, including 95 first-diagnosed DR patients and 105 patients without DR, and all patients underwent OCTA examination and a collection of demographics and renal function parameters. After a quality check, automated measurements of the foveal avascular zone area, vessel density(VD), and perfusion density(PD)of both 3 mm×3 mm and 6 mm×6 mm windows were obtained.RESULTS: Using random forest and multivariate Logistic regression methods, we developed a diagnostic model for DR based on 12 variables(age, FBG, SBP, DBP, HbA1c, ALT, ALP, urea/Scr, DM duration, HUA, DN, and CMT). Adding specific OCTA parameters enhanced the efficacy of the existing diagnostic model for DR(outer vessel density in 6 mm×6 mm window, AUC=0.837 vs 0.819, P=0.03). In the study of DN patients, the parameters in the 6 mm×6 mm window improved the diagnostic efficacy of DR(inner VD; outer VD; full VD; outer PD; full PD).CONCLUSION:The outer VD in the 6 mm×6 mm window can enhance the efficacy of the traditional DR diagnostic model. Meanwhile, compared with the 3 mm×3 mm window, the microvascular parameters in the 6 mm× 6 mm window focusing on DN patients can be more sensitive to diagnosing the occurrence of DR.

Objective To propose a centrifuge overload simulation method for post stall super manueuvering flights to conduct the pilot centrifuge training during post stall super maneuvering flights.Methods Firstly,the independent active disturbance rejection control was designed in the longitudinal,transverse and heading channels to achieve closed-loop control of the aircraft at high angles of attack with thrust vector control technology.Secondly,a method for establishing control command for the three-axis centrifuge with the main arm rotation,cabin roll and cabin pitch was put forward based on the relationship between the pilot overload and the centrifuge control information.Finally,a simulation model was constructed based on the cobra maneuver to carry out digital simulation experiments.Results The method proposed effectively extracted overload information under super maneuvering flight conditions,then the centrifuge control commands could be determined accordingly to enable corresponding overload trainings with the centrifuge.Conclusion The proposed method facilitates the improvement of pilots'flight maneuvering performance in post stall super maneuvering flights under sustained high overload conditions.[Chinese Medical Equipment Journal,2025,46(7):21-26]

Objective To propose a centrifuge overload simulation method for post stall super manueuvering flights to conduct the pilot centrifuge training during post stall super maneuvering flights.Methods Firstly,the independent active disturbance rejection control was designed in the longitudinal,transverse and heading channels to achieve closed-loop control of the aircraft at high angles of attack with thrust vector control technology.Secondly,a method for establishing control command for the three-axis centrifuge with the main arm rotation,cabin roll and cabin pitch was put forward based on the relationship between the pilot overload and the centrifuge control information.Finally,a simulation model was constructed based on the cobra maneuver to carry out digital simulation experiments.Results The method proposed effectively extracted overload information under super maneuvering flight conditions,then the centrifuge control commands could be determined accordingly to enable corresponding overload trainings with the centrifuge.Conclusion The proposed method facilitates the improvement of pilots'flight maneuvering performance in post stall super maneuvering flights under sustained high overload conditions.[Chinese Medical Equipment Journal,2025,46(7):21-26]

Objective To explore the modal testing method for the three-axis manned centrifuge under elastic boundary conditions with considerations on its complicated structure and high rotational inertia.Methods Modal testing was carried out with a three-axis manned centrifuge under elastic boundary conditions as the subject and a force hammer as the excitation source according to GJB 2706A-2008 Modal tests method for spacecraft and GB/T 11349.3-1992 Experimental determination of mechnical mobility measurements using impact excitation.Four times of hammering were carried out at each excitation position,and the data of the four times of hammering underwent linear average computation.Data acquisition was implemented with a three-axis accelerometer and a 64-channel data collector,and the modal data were analyzed using a frequency response function based on the Test.Lab modal test and analysis software.Results The coherence coefficient of the excitation signal was not lower than 0.8 in the 30 Hz band;the first three orders of the system's intrinsic vibrations were all torsional vibrations,with the frequencies of 9.15,15.66 and 19.22 Hz,respectively;the first order frequency of the system was about 9.15 Hz for both Z18 and Z21 excitation positions,and each of the second and third order frequencies similar situations were observed for also had a roughly equal value for the two excitation positions.Conclusion The force hammer testing method is applicable for the modal testing of the three-axis manned centrifuge,ensuring equipment safety and subject comfort.Referen-ces are provided for the following structural optimization design.[Chinese Medical Equipment Journal,2024,45(8):38-43]

Orodispersible films (oral dispersible films), a novel form of oral solid dosage forms, are widely used for patients with dysphagia and those with uncontrollable autonomic behavior. In this study, suvorexant orodispersible film was prepared by hot melt extrusion technology, and the disintegration time, mechanical properties, in vitro dissolution and pharmacokinetics were evaluated, compared with other orodispersible films and commercially available tablets Belsomra. All experiments were approved by the Committee on the Management and Use of Laboratory Animals of Academy of Military Medical Sciences (IACUC-DWZX-2024-504). The results showed that the dissolution rate of suvorexant orodispersible film was faster and the mechanical strength was better than that of other commercially available orodispersible film, which could meet the needs of storage and transportation. Differential scanning calorimetry and X-ray diffraction results showed that suvorexant was dispersed within the orodispersible film in an amorphous state. The in vitro dissolution of the film was observed to be four times faster than that of the commercial tablets, achieving complete dissolution within five minutes. Pharmacokinetic evaluations in Beagle dogs revealed that the self-formulated orodispersible film exhibited no significant differences in the area under the blood concentration-time curve when compared with Belsomra. However, the film showed a faster onset of action, with a peak time that was twice as rapid, and a maximum blood concentration that was twice as high as that of Belsomra. Leveraging hot melt extrusion technology, the suvorexant orodispersible film offers a straightforward, continuous production process with consistent quality. It serves as an excellent platform for the development of solvent-free film preparations tailored for patients with special needs.

The rheological properties of drug and carrier materials have a wide range of guiding significance for the formulation and process development of solid dispersions. In this study, the rheological properties of materials with different drug carrier ratios were systematically studied with suvorexant as the model drug and copovidone as the carrier material, which provided a sufficient basis for determining the formulation and process of solid dispersions. The optimal suvorexant-copovidone ratio obtained by oscillating temperature scanning was 1∶4. If the ratio is greater than 1∶ 4, the glass transformation temperature of the material will increase significantly, and the solubilization effect of the solid dispersion will show a downward trend. The results of oscillation temperature scanning and oscillation temperature sweep can show that when the extrusion temperature is greater than 150 ℃, the viscosity of the material is less than 10 000 Pa·s, and the melt can be extruded smoothly, and the best extrusion temperature of 160-180 ℃ can be obtained by combining the dissolution results. Finally, the dissolution of suvorexant tablets guided by rheological property studies in multiple media is similar to that of the commercially available tablets Belsomra. Therefore, rheological studies can screen and optimize the formulation and process of suvorexant solid dispersions at the mechanism level, which is of great significance to improve the success rate of R&D and shorten the R&D cycle of solid dispersions prepared by hot melt extrusion.

Objective:To establish a foundation for the psychological selection of air combat personnel by studying the cognitive ability measurement methods for air combat personnel.Methods:The tests were done for 390 subjects including 142 radar operators, 117 radar academy students, 45 air combat personnel, and 86 radar trainees. Based on job analysis, 5 cognitive test tasks were developed, including graphic discrimination, working memory test, target tracking, voice anti-jamming, and comprehensive management. The discrimination was evaluated by the distribution graphs and coefficients of variation of the test results. The criterion-related validity was examined by correlating the cognitive test scores with the participants' work performance or academic grades, which served as the criteria. Content validity was determined by a 9-level scoring (1-9) of task necessity that collected from 30 air combat personnel and by the assessments of necessity of tested abilities that came from 30 experts. The parallel forms reliability, test-retest reliability and split-half reliability were tested respectively according to the results of each test.Results:The original scores of each test showed approximate normal distribution. The selected indicators' coefficients of variation were 14.4%-111.0%, reliabilities were 0.764-0.827, and criterion-related validities were 0.186-0.445, all of which were statistically significant (all P<0.05). In 30 air combat personnel, 53.3%-83.3% scored 7-9 to the necessity of test items, and 93.3% of 30 experts gave the required or basically required evaluations to the test items. Conclusions:The series tests show good content validity, and discrimination, reliability and the criterion-related validity meet the requirements of psychometrics. Especially the tests of graphic discrimination, working memory and target tracking expressed higher degree of discrimination, and can be used as cognitive ability assessment tool for the selection of air combat personnel.

Objective:To establish a foundation for the psychological selection of air combat personnel by studying the cognitive ability measurement methods for air combat personnel.Methods:The tests were done for 390 subjects including 142 radar operators, 117 radar academy students, 45 air combat personnel, and 86 radar trainees. Based on job analysis, 5 cognitive test tasks were developed, including graphic discrimination, working memory test, target tracking, voice anti-jamming, and comprehensive management. The discrimination was evaluated by the distribution graphs and coefficients of variation of the test results. The criterion-related validity was examined by correlating the cognitive test scores with the participants' work performance or academic grades, which served as the criteria. Content validity was determined by a 9-level scoring (1-9) of task necessity that collected from 30 air combat personnel and by the assessments of necessity of tested abilities that came from 30 experts. The parallel forms reliability, test-retest reliability and split-half reliability were tested respectively according to the results of each test.Results:The original scores of each test showed approximate normal distribution. The selected indicators' coefficients of variation were 14.4%-111.0%, reliabilities were 0.764-0.827, and criterion-related validities were 0.186-0.445, all of which were statistically significant (all P<0.05). In 30 air combat personnel, 53.3%-83.3% scored 7-9 to the necessity of test items, and 93.3% of 30 experts gave the required or basically required evaluations to the test items. Conclusions:The series tests show good content validity, and discrimination, reliability and the criterion-related validity meet the requirements of psychometrics. Especially the tests of graphic discrimination, working memory and target tracking expressed higher degree of discrimination, and can be used as cognitive ability assessment tool for the selection of air combat personnel.