The proton treatment control system is the supporting software of the proton therapy device, which specifically coordinates and controls the status and work of each subsystem. In this study, the software architecture and hardware implementation of the proton treatment control system was developed and built a foundation for the overall debugging. Using C# programming language and WPF programming techniques, TCP network communication protocol specified by the proton treatment technical document and MVVM pattern in Windows system, the logic design and implementation of each level were studied. Meanwhile, the communication interface between the subsystems under TCP communication protocol was agreed. The logic design and research of the setup field and treatment field were carried out. And the User Interface was designed and developed using the above technology. The program realizes the communication and interaction between the proton treatment control system and each subsystem, so as to control and monitor the whole treatment process. The proton treatment control system provides a software basis for the remote overall debugging and on-line monitor and control of proton treatment device.
Protons ; User-Computer Interface ; Software ; Computers ; Logic

In this study, a surface electromyography (sEMG) and blood oxygen signal real-time monitoring system is designed to explore the changes of physiological signals during muscle fatigue, so as to detect muscle fatigue. The analysis method of sEMG and the principle of blood oxygen detection are respectively introduced, and the system scheme is expounded. The hardware part of the system takes STM32 as the core. Conditioning module composition; blood oxygen signal acquisition is based on near infrared spectroscopy (NIRS), specifically including light source, light source driving, photoelectric conversion, signal conditioning and other modules. The system software part is based on the real-time uC/OS-III software system. The characteristic parameters of sEMG were extracted by isometric contraction local muscle fatigue experiment; the relative changes of oxyhemoglobin (HbO₂) and deoxyhemoglobin (Hb) were calculated in the forearm blocking experiment, thereby verifying that the system collects two signals effectiveness.
Muscle, Skeletal ; Oxygen ; Electromyography ; Muscle Fatigue/physiology* ; Computers

OBJECTIVE: To compare the clinical efficacy of acupuncture, Chinese medication and combination of acupuncture and medication in the treatment of dry eye complicated with computer vision syndrome (CVS). METHODS: A total of 152 patients with dry eye complicated with CVS were randomly divided into an acupuncture-medication group (38 cases, 1 case was removed), an acupuncture group (38 cases, 1 case dropped off), a Chinese medication group (38 cases, 1 case was removed), and a western medication group (38 cases, 1 case dropped off). In the western medication group, sodium hyaluronate eye drop combined with esculin and digitalis glycosides eye drop were used. In the acupuncture group, acupuncture was applied at bilateral Taiyang (EX-HN 5)， Cuanzhu (BL 2), Fengchi (GB 20), Qimen (LR 14) , and Hegu (LI 4) etc., once a day. In the Chinese medication group, Yiqi Congming decoction formula ganule was given orally, one dose a day. In the acupuncture-medication group, acupuncture combined with Yiqi Congming decoction formula granule were used. All groups were treated for 14 d. The non-invasive first tear film break-up time (NIBUT f), non-invasive average tear film break-up time (NIBUT av), tear meniscus height (TMH), ocular surface disease index (OSDI) score, and CVS symptom score were compared between the patients of each group before and after treatment. RESULTS: After treatment, the NIBUT f, NIBUT av, and TMH were increased compared with those before treatment in the patients of the 4 groups (P<0.01); the NIBUT f and NIBUT av in the acupuncture-medication group and the acupuncture group were higher than those in the Chinese medication group and the western medication group (P<0.05), and the TMH in the acupuncture-medication group and the Chinese medication group were higher than those in the acupuncture group and the western medication group (P<0.05). After treatment, the OSDI scores, the various scores and total scores of CVS (except for head symptom score in the western medication group) were decreased compared with those before treatment in the patients of the 4 groups (P<0.01). The OSDI score, total score, eye symptom score, and body symptom score of CVS in the acupuncture-medication group were lower than those in the acupuncture group, the Chinese medication group, and the western medication group (P<0.01, P<0.05), the head symptom score of the acupuncture-medication group was lower than that in the western medication group (P<0.05), and the CVS physical symptom scores and mental cognitive symptom scores of the acupuncture-medication group and the acupuncture group were lower than those in the Chinese medication group and the western medication group (P<0.05). CONCLUSION Acupuncture has advantages in improving NIBUT f, NIBUT av, and CVS physical symptoms and cognitive symptoms, and the Chinese medication has advantage in improving TMH. The combination of acupuncture and Chinese medication has better effects compared with monotherapy.
Humans ; Dry Eye Syndromes/etiology* ; Acupuncture Therapy ; Computers ; Treatment Outcome ; Acupuncture Points ; Ophthalmic Solutions

OBJECTIVE: To explore the feasibility and early effectiveness of computer-simulated osteotomy based on the health-side combined with guide plate technique in the treatment of cubitus varus deformity in adolescents. METHODS: The clinical data of 23 patients with cubitus varus deformity who met the selection criteria between June 2019 and February 2023 were retrospectively analyzed. There were 17 males and 6 females, ranging in age from 4 to 16 years with an average of 8.5 years. The time from injury to operation was 1-4 years. The angle of distal humerus rotation was defined by humeral head posterior inclination angle using low radiation dose CT to scan the patient's upper extremity data at one time, and the preoperative rotation of the distal humerus on the affected side was (33.82±4.39)°. The CT plain scan data were imported into 9yuan3D digital orthopaedic system (V3.34 software) to reconstruct three-dimensional images of both upper extremities. The simulated operation was performed with the healthy upper extremity as the reference, the best osteotomy scheme was planned, overlapped and compared, and the osteotomy guide plate was prepared. The patients were followed up regularly after operation, and the formation of callus in the osteotomy area was observed by X-ray examination. Before and after operation, the carrying angle of both upper extremities (the angle of cubitus valgus was positive, and the angle of cubitus varus was negative) and anteversion angle were measured on X-ray and CT images. At the same time, the flexion and extension range of motion of elbow joint and the external rotation range of motion of upper extremity were measured, and Mayo score was used to evaluate the function of elbow joint. RESULTS: The operation time ranged from 34 to 46 minutes, with an average of 39 minutes. All patients were followed up 5-26 months, with a mean of 14.9 months. All the incisions healed by first intention after the operation; 2 patients had nail path irritation symptoms after Kirschner wire fixation, which improved after dressing change; no complication such as breakage and loosening of internal fixators occurred after regular X-ray review. Continuous callus formed at the osteotomy end at 4 weeks after operation, and the osteotomy end healed at 8-12 weeks after operation. At last follow-up, the carrying angle, anteversion angle, external rotation range of motion, and extension and flexion range of motion of the elbow joint of the affected side significantly improved when compared with preoperative ones ( P<0.05). Except for the extension range of motion of the healthy elbow joint ( P<0.05), there was no significant difference in other indicators between the two sides ( P>0.05). At last follow-up, the Mayo elbow score was 85-100, with an average of 99.3; 22 cases were excellent, 1 case was good, and the excellent and good rate was 100%. CONCLUSION Computer-simulated osteotomy based on health-side combined with guide plate technique for treating cubitus varus deformity in adolescents can achieve precise osteotomy, which has the advantages of short operation time and easy operation, and the short-term effectiveness is satisfactory.
Male ; Female ; Humans ; Adolescent ; Child, Preschool ; Child ; Elbow ; Humeral Fractures/surgery* ; Retrospective Studies ; Joint Deformities, Acquired/surgery* ; Elbow Joint/surgery* ; Limb Deformities, Congenital ; Osteotomy/methods* ; Humeral Head ; Range of Motion, Articular ; Computers ; Treatment Outcome

The eye-computer interaction technology based on electro-oculogram provides the users with a convenient way to control the device, which has great social significance. However, the eye-computer interaction is often disturbed by the involuntary eye movements, resulting in misjudgment, affecting the users' experience, and even causing danger in severe cases. Therefore, this paper starts from the basic concepts and principles of eye-computer interaction, sorts out the current mainstream classification methods of voluntary/involuntary eye movement, and analyzes the characteristics of each technology. The performance analysis is carried out in combination with specific application scenarios, and the problems to be solved are further summarized, which are expected to provide research references for researchers in related fields.
Computers ; Electrooculography/methods* ; Eye Movements ; Movement

With the development of computer and digital technology, the application of computer-aided technology has become a new trend in the field of oral implant. Computer-guided oral implant surgery has the advantages of being safer and more accurate than traditional implant surgery, and it can truly realize the concept of restoration-oriented implant. However, computer-guided oral implant surgery has various steps which cause deviations accumulation, so that some clinicians remain sceptical about the accuracy of the technology. Currently, due to the lack of a quantitative system for evaluating the accuracy of computer-guided oral implantation, the implant deviation in each step is still inconclusively in the stage of research and debate. The purpose of this paper is to summarize the advantages and disadvantages, research progress, accuracy and influencing factors of computer-guided oral implantation, aiming to provide a reference for improving implant accuracy and guiding clinical design and surgery.
Computer-Aided Design ; Computers ; Cone-Beam Computed Tomography ; Dental Implants ; Imaging, Three-Dimensional ; Patient Care Planning ; Surgery, Computer-Assisted

In order to facilitate doctors to better obtain cardiovascular images by using intravascular ultrasound imaging system and make a more accurate diagnosis, a digital coordinate conversion method of intravascular ultrasound imaging system based on CORDIC algorithm is proposed, it converts polar coordinates into rectangular coordinates through angular rotation and orientation calculation. The experimental simulation test is carried out on the platform of intravascular ultrasound imaging system by FPGA. Experimental simulation shows that, CORDIC algorithm can effectively output sine and cosine values, compared with the traditional table finding method, this algorithm has faster speed, stronger real-time performance and needs less hardware resources. It is more suitable for intravascular ultrasound imaging system.
Algorithms ; Computer Simulation ; Computers ; Ultrasonography, Interventional

In view of the high recognition error rate and long scanning time in the existing hospital scanning technology, a new hospital operating room scanning system is designed based on personal digital assistant (PDA). The PDA scanning device adopts PIC16F877A microcontroller of 8 bit for wireless transmission through RFID and bluetooth technology, the code scanning efficiency is greatly improved. In addition, in order to improve the accuracy of image analysis, this study also adopts the energy driven sampling classification algorithm (EDS-CA) to properly preprocess the medical data information received through PDA scanning, then constructs a function classifier, and improves the image processing efficiency according to the EDS-CA reduction process. The experimental results show that the average accuracy of the code scanning system designed in this study is 95%, which proves that PDA code scanning has good performance.
Algorithms ; Computers, Handheld ; Hospitals ; Operating Rooms ; Technology

Speech expression is an important high-level cognitive behavior of human beings. The realization of this behavior is closely related to human brain activity. Both true speech expression and speech imagination can activate part of the same brain area. Therefore, speech imagery becomes a new paradigm of brain-computer interaction. Brain-computer interface (BCI) based on speech imagery has the advantages of spontaneous generation, no training, and friendliness to subjects, so it has attracted the attention of many scholars. However, this interactive technology is not mature in the design of experimental paradigms and the choice of imagination materials, and there are many issues that need to be discussed urgently. Therefore, in response to these problems, this article first expounds the neural mechanism of speech imagery. Then, by reviewing the previous BCI research of speech imagery, the mainstream methods and core technologies of experimental paradigm, imagination materials, data processing and so on are systematically analyzed. Finally, the key problems and main challenges that restrict the development of this type of BCI are discussed. And the future development and application perspective of the speech imaginary BCI system are prospected.
Brain ; Computers ; Humans ; Imagery, Psychotherapy ; Speech ; Technology

The computer information technology that has penetrated into every aspect of our lives, can not only assist the screening of drugs, but also simulate the effect of drugs. At present, computer-aided technologies have been used to screen aptamers, which play an important role in improving the screening efficiency and screening high affinity binding aptamers. This review summarized the screening methods of aptamers through computer-aided sequence evaluation, structural analysis and molecular docking.
Aptamers, Nucleotide ; Computers ; Molecular Docking Simulation ; SELEX Aptamer Technique/methods*