Depression, a mental health disorder, has emerged as one of the significant challenges in the global public health domain. Investigating the pathogenesis of depression and accurately assessing the symptomatic changes are fundamental to formulating effective clinical diagnosis and treatment strategies. Utilizing non-invasive brain imaging technologies such as functional magnetic resonance imaging and scalp electroencephalography, existing studies have confirmed that the onset of depression is closely associated with abnormal neural activities and altered functional connectivity in multiple brain regions. Magnetoencephalography, unaffected by tissue conductivity and skull thickness, boasts high spatial resolution and signal-to-noise ratio, offering unique advantages and significant value in revealing the abnormal brain mechanisms and neural characteristics of depression. This review, starting from the rhythmic characteristics, nonlinear dynamic features, and connectivity characteristics of magnetoencephalography in depression patients, revisits the research progress on magnetoencephalography features related to depression, discusses current issues and future development trends, and provides insights for the study of pathophysiological mechanisms, as well as for clinical diagnosis and treatment of depression.
Humans ; Magnetoencephalography/methods* ; Brain/physiopathology* ; Depression/diagnosis* ; Electroencephalography ; Magnetic Resonance Imaging

Objective To explore the radiation dose of cone beam breast computed tomography(CBBCT)and the effect of breast density,length,and thickness on the radiation dose of CBBCT.Methods A retrospective analysis was conducted on 175 patients with breast cancer who underwent CBBCT,digital mammography(DM)and digital breast tomosynthesis(DBT)examinations.Breast density,length,thickness,and radiation dose of the patients were recorded.The differences in radiation dose between CBBCT and DM,as well as CBBCT and DBT were compared.Additionally,the differences in CBBCT radiation dose among different breast density,length,and thickness were compared.Results The difference in radiation dose between CBBCT and DM was statistically significant(P<0.001),while no statistically significant difference between CBBCT and DBT(P>0.05).The radiation dose of CBBCT did not show any significant variation across different breast density and thickness(P<0.05).Breast length was positively correlated with the radiation dose of CBBCT(P<0.001).Conclusion The radiation dose of CBBCT is higher than that of DM,which is approxi-mately doubled,the difference in radiation dose between CBBCT and DBT is not statistically significant.Additionally,with the increase of breast length,the radiation dose of CBBCT gradually increase.

Objective To explore the radiation dose of cone beam breast computed tomography(CBBCT)and the effect of breast density,length,and thickness on the radiation dose of CBBCT.Methods A retrospective analysis was conducted on 175 patients with breast cancer who underwent CBBCT,digital mammography(DM)and digital breast tomosynthesis(DBT)examinations.Breast density,length,thickness,and radiation dose of the patients were recorded.The differences in radiation dose between CBBCT and DM,as well as CBBCT and DBT were compared.Additionally,the differences in CBBCT radiation dose among different breast density,length,and thickness were compared.Results The difference in radiation dose between CBBCT and DM was statistically significant(P<0.001),while no statistically significant difference between CBBCT and DBT(P>0.05).The radiation dose of CBBCT did not show any significant variation across different breast density and thickness(P<0.05).Breast length was positively correlated with the radiation dose of CBBCT(P<0.001).Conclusion The radiation dose of CBBCT is higher than that of DM,which is approxi-mately doubled,the difference in radiation dose between CBBCT and DBT is not statistically significant.Additionally,with the increase of breast length,the radiation dose of CBBCT gradually increase.

The prefrontal cortex and hippocampus may support sequential working memory beyond episodic memory and spatial navigation. This stereoelectroencephalography (SEEG) study investigated how the dorsolateral prefrontal cortex (DLPFC) interacts with the hippocampus in the online processing of sequential information. Twenty patients with epilepsy (eight women, age 27.6 ± 8.2 years) completed a line ordering task with SEEG recordings over the DLPFC and the hippocampus. Participants showed longer thinking times and more recall errors when asked to arrange random lines clockwise (random trials) than to maintain ordered lines (ordered trials) before recalling the orientation of a particular line. First, the ordering-related increase in thinking time and recall error was associated with a transient theta power increase in the hippocampus and a sustained theta power increase in the DLPFC (3-10 Hz). In particular, the hippocampal theta power increase correlated with the memory precision of line orientation. Second, theta phase coherences between the DLPFC and hippocampus were enhanced for ordering, especially for more precisely memorized lines. Third, the theta band DLPFC → hippocampus influence was selectively enhanced for ordering, especially for more precisely memorized lines. This study suggests that theta oscillations may support DLPFC-hippocampal interactions in the online processing of sequential information.
Adult ; Female ; Humans ; Young Adult ; Epilepsy ; Hippocampus ; Memory, Short-Term ; Mental Recall ; Prefrontal Cortex ; Theta Rhythm ; Male

Cartilage is solid connective tissue that recovers slowly from injury, and pain and dysfunction from cartilage damage affect many people. The treatment of cartilage injury is clinically challenging and there is no optimal solution, which is a hot research topic at present. With the rapid development of 3D printing technology in recent years, 3D bioprinting can better mimic the complex microstructure of cartilage tissue and thus enabling the anatomy and functional regeneration of damaged cartilage. This article reviews the methods of 3D printing used to mimic cartilage structures, the selection of cells and biological factors, and the development of bioinks and advances in scaffold structures, with an emphasis on how 3D printing structure provides bioactive cargos in each stage to enhance the effect. Finally, clinical applications and future development of simulated cartilage printing are introduced, which are expected to provide new insights into this field and guide other researchers who are engaged in cartilage repair.

Background/Aims: Low educational attainment is a well-established risk factor for nonalcoholic fatty liver disease (NAFLD) in developed areas. However, the association between educational attainment and the risk of NAFLD is less clear in China. Methods: A cross-sectional study including over 200,000 Chinese adults across mainland China was conducted. Information on education level and lifestyle factors were obtained through standard questionnaires, while NAFLD and advanced fibrosis were diagnosed using validated formulas. Outcomes included the risk of NAFLD in the general population and high probability of fibrosis among patients with NAFLD. Logistic regression analysis was employed to estimate the risk of NAFLD and fibrosis across education levels. A causal mediation model was used to explore the potential mediators. Results: Comparing with those receiving primary school education, the multi-adjusted odds ratios (95% confidence intervals) for NAFLD were 1.28 (1.16 to 1.41) for men and 0.94 (0.89 to 0.99) for women with college education after accounting for body mass index. When considering waist circumference, the odds ratios (95% CIs) were 0.94 (0.86 to 1.04) for men and 0.88 (0.80 to 0.97) for women, respectively. The proportions mediated by general and central obesity were 51.00% and 68.04% for men, while for women the proportions were 48.58% and 32.58%, respectively. Furthermore, NAFLD patients with lower educational attainment showed an incremental increased risk of advanced fibrosis in both genders. Conclusions In China, a low education level was associated with a higher risk of prevalent NAFLD in women, as well as high probability of fibrosis in both genders.

Cartilage is solid connective tissue that recovers slowly from injury,and pain and dysfunction from cartilage damage affect many people.The treatment of cartilage injury is clinically challenging and there is no optimal solution,which is a hot research topic at present.With the rapid development of 3D printing technology in recent years,3D bioprinting can better mimic the complex microstructure of cartilage tissue and thus enabling the anatomy and functional regeneration of damaged cartilage.This article reviews the methods of 3D printing used to mimic cartilage structures,the selection of cells and biological factors,and the development of bioinks and advances in scaffold structures,with an emphasis on how 3D printing structure provides bioactive cargos in each stage to enhance the effect.Finally,clinical applications and future development of simulated cartilage printing are introduced,which are expected to provide new insights into this field and guide other researchers who are engaged in cartilage repair.

ObjectiveTo establish the quality standard of Liangditang benchmark samples. MethodUltra performance liquid chromatography-quadrupole time-of-flight mass spectrometry （UPLC-QTOF-MS） was used to qualitatively analyze the chemical composition of Liangditang on the basis of molecular and fragment ion peak information with cracking law. The mobile phase was methanol （A）-0.05% phosphate aqueous solution （B） for gradient elution （0-10 min， 5%-23.5%A； 10-20 min， 23.5%A； 20-58 min， 23.5%-63%A； 58-60 min， 63%-90%A）， the flow rate was 0.8 mL·min^-1， and the detection wavelength was 254 nm. Electrospray ionization was employed under positive ion mode， the detection range was m/z 100-1 700. Key quality attributes and sources were determined by comparing with single medicine and reference substances. Through mass transfer analysis of multiple batches from decoction pieces to benchmark samples， high performance liquid chromatography （HPLC） for determining the contents of index components and HPLC detection of characteristic maps were established. Through the determination of 15 batches of benchmark samples， the content range of the index components and the common peaks of the characteristic map were determined. Thin layer chromatography （TLC） was applied to the identification of 5 medicines in the formula. Moisture and dry extract yield of the benchmark samples were determined by drying method. ResultA total of 27 compounds were inferred from the benchmark samples of Liangditang， among which 9 compounds were confirmed by comparison with the control， including catalpol， harpagide， gallic acid， albiflorin， paeoniflorin， verbascoside， angoroside C， cinnamic acid and harpagoside. A method for determining the characteristic maps of the benchmark samples were established and 13 peaks were assigned， and the characteristic peaks were mainly derived from wine-processed products of Rehmanniae Radix， Scrophulariae Radix and wine-processed products of Paeoniae Radix Alba. The similarity between the characteristic map of 15 batches of benchmark samples and the control characteristic map was >0.9. Methods for the determination of paeoniflorin， harpagoside， L-hydroxyproline and glycine were established， and the contents of these four components in 15 batches of benchmark samples were within ±30% of the corresponding mean value， and the transfer rate of decoction pieces to the benchmark samples was stable and controllable. TLC was established to identify 5 prescription drugs （except Ejiao） with two kinds of test solutions， and the results showed that the method had good specificity. The average dry extract yield was 48.06%， and the average moisture was 5.58%， which were within the range of ±10% and ±30% of their mean values， respectively. ConclusionThe quality standard of Liangditang benchmark samples was as follows：the similarity between the benchmark samples and the control characteristic map is >0.9， the contents of paeoniflorin， harpagoside， L-hydroxyproline and glycine are 217-403， 24-46， 634-1 178， 1 253-2 328 mg per dose， the dry extract yield is 43.0%-53.0%， the moisture is 4.0%-7.0%， under the set detection conditions， the benchmark samples have corresponding characteristic spots by comparing with the control herbs of 5 medicines. This quality standard is stable and reliable， which fills the gap in the quality control of Liangditang， and can provide a reference for the establishment of the quality standard of Liangditang granules.

Objective:To provide genetic counseling and prenatal diagnosis for a fetus with mosaic trisomy 20.Methods:Chromosomal karyotyping, chromosomal microarray analysis (CMA) and fluorescence in situ hybridization (FISH) were carried out for a pregnant woman with advanced maternal age. Results:The karyotype of amniotic fluid sample was 47, XN, + 20, whilst the result of CMA was normal. To verify this discrepancy, CMA was performed again with the cultured amniotic fluid, which yielded a result of 47, XN, + 20. FISH assay of the amniotic fluid sample was nuc ish(D20Z1)×3[11]/(D20Z1)×2[89], which indicated that about 11% of fetal cells were trisomy 20. After the fetus was born, the karyotype of peripheral blood sample was normal.Conclusion:The amniotic fluid sample might be mosaic trisomy 20, and a dominant growth of 47, XN, + 20 cells had occurred during the culture process, resulting in alteration of amniotic fluid cell composition. Mosaic trisomy 20 indicated by FISH may be attributed to confined placental mosaicism or somatic mosaicism of trisomy 20.