OBJECTIVE: To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook. METHODS: Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force. RESULTS: In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant. CONCLUSION Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals ; Bone Plates ; Clavicle/surgery* ; Swine ; Fractures, Stress/etiology* ; Female ; Risk Factors ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Biomechanical Phenomena ; Bone Density

OBJECTIVE: To compare the efficacy of percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar fractures. METHODS: A retrospective case-control study was used to analyze the clinical data of 78 patients with osteoporotic thoracic and lumbar fractures admitted from October 2017 to May 2019. According to the surgical method, it was divided into percutaneous pedicle screw combined with unilateral nail placement combined with unilateral bone cement strengthening group(bone cement group) and percutaneous pedicle screw combined with bilateral nail placement(screw group). In the bone cement group, 40 patients included 16 males and 24 females, with a mean age of (62.1±8.1) years old. In the screw group, 38 patients included 18 males and 20 females with a mean age of (65.1±9.3) years old. The operation time, intraoperative blood loss, length of hospital stay and postoperative complications were compared between two groups. The kyphosis Cobb angle, anterior edge height ratio, central height ratio and pain visual analogue score(VAS) were compared. RESULTS: All patients were followed up for 25 to 36 months. The operation time (70.1±17.3) min of the cement group was shorter than that of the screw group (78.6±18.2) min(P<0.05). There were no significant differences in intraoperative blood loss and length of hospital stay(P>0.05). The VAS in the cement group 1 year 1.5±0.5 and the latest follow-up 0.5±0.3 after operation were lower than 1 year 1.8±0.3 and the latest follow-up 0.8±0.4 in the screw group(P<0.05). The kyphosis Cobb angle, anterior edge height ratio, central height ratio in bone cement group, 1 year (6.2±1.2)°, (86.6±3.5)%, (91.1±2.5)%, the last follow-up (6.4±0.7)°, (85.5±3.3)%, (90.5±6.3)% were better than that of the screw group 1 year (6.8±1.4)°, (83.1±2.4)%, (89.9±3.4)% and the latest follow-up (7.1±1.1)°, (82.6±4.1)%, (87.6±5.9)%(P<0.05). There were 3 cases of bone cement leakage in the cement group, all of which had no clinical symptoms;and 2 cases of pedicle screws were extracted in the screw group, and the screws were removed at the last follow-up. CONCLUSION Percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar compression fractures in the elderly can achieve satisfactory efficacy and effectively relieve the pain of patients, but the former internal fixation system is more stable, and the long-term follow-up can effectively maintain the height of the anterior middle column and the correction of kyphosis deformity, and the incidence of chronic low back pain is lower.
Humans ; Male ; Female ; Aged ; Bone Cements ; Middle Aged ; Thoracic Vertebrae/surgery* ; Lumbar Vertebrae/surgery* ; Retrospective Studies ; Spinal Fractures/surgery* ; Osteoporotic Fractures/surgery* ; Case-Control Studies ; Bone Nails ; Pedicle Screws

OBJECTIVE: To determine risk factors for cutout failure in geriatric intertrochanteric fracture patients after cephalomedullary nail fixation. METHODS: A retrospective review of 518 elderly patients who underwent cephalomedullary nail fixation for intertrochanteric fractures between January 2008 and August 2018 was conducted, including 167 males and 351 females, age from 65 to 97 years old. All patients were followed up for at least one year after surgery and divided into a healed group and a cutout group based on whether the hip screw cutout occurred. Among all patients, 10 cases experienced hip screw cutout. The general information, surgical data, and radiological data of the two groups were compared, and risk factors influencing hip screw cutout were analyzed. Propensity score matching was then performed on the cutout group based on gender, age, body mass index(BMI), and American Society of Anesthesiologists(ASA), and 40 patients from the healed group were matched at a ratio of 1∶4. Key risk factors affecting hip screw cutout were further analyzed. Multivariable logistic regression analysis was conducted to evaluate associations between variables and cutout failure. RESULTS: There were no statistically significant differences between the healed group and the cutout group in terms of age, gender, BMI, ASA, and AO classification. However, statistically significant differences were observed between the two groups in terms of reduction quality(P=0.003) and tip-apex distance(TAD), P<0.001. Multivariate analysis identified poor reduction quality OR=23.138, 95%CI(2.163, 247.551), P=0.009 and TAD≥25 mm OR=30.538, 95%CI(2.935, 317.770), P=0.004 as independent risk factors for cutout failure. CONCLUSION The present study identified poor reduction quality and TAD≥25 mm as factors for cutout failure in geriatric intertrochanteric fractures treated with cephalomedullary nails. Further studies are needed to calculate the optimal TAD for cephalomedullary nails.
Humans ; Male ; Female ; Hip Fractures/surgery* ; Aged, 80 and over ; Aged ; Risk Factors ; Retrospective Studies ; Fracture Fixation, Intramedullary/adverse effects* ; Bone Nails ; Bone Screws

OBJECTIVE: To investigate the effect of expansive open-door laminoplasty combined with single lateral mass screw fixation on the posterior longitudinal ligament ossification and cervical instability and its effect on sagittal balance. METHODS: A retrospective analysis of 65 patients with the posterior longitudinal ligament with cervical instability from May 2012 to July 2018 was conducted. The patients were divided into two groups according to the surgical method. Thirty-four patients were treated with open-door laminoplasty including 19 males and 15 females, aged 49 to 60 years old with an average age of (54.4±4.77) years old;symptoms lasted 8 to 39 months with an average of (21.0±8.2) months. Thirty-one patients were treated with single-door laminoplasty combined with single mass screw fixation including 17 males and 14 females, aged 50 to 59 years old with an average age of (55.4±3.2) years;symptoms lasted 7 to 48 months with an average of (23.7±13.1) months. General information of the two groups, including operation time, intraoperative blood loss, and postoperative complications was recorded. Sagittal vertical axis(SVA), C₀-C₂ and C₂-C₇ cobb angle were measured by X-ray before operation and at the last follow-up. Clinical efficacy was evaluated using the Japanese Orthopaedic Association(JOA) score. RESULTS: Surgery was successful in all patients. The operation time (109±15) min in the single-door laminoplasty combined with lateral mass screw fixation group was longer than that in the single-door group(128±16) min(P<0.05). There was no significant difference in intraoperative blood loss, postoperative axial symptoms and follow-up time between two groups(P>0.05). At the latest follow-up, both groups showed significant improvement in the motor and sensory components of the JOA score and the total JOA score compared to pre-surgery(P<0.05) and no significant change in bladder function score(P>0.05). There was no significant difference between two groups(P>0.05). At the latest follow-up, the C₀-C₂ Cobb angle increased in both groups compared to preoperative and more the single-door laminoplasty group(P<0.05). The angle of the C₂-C₇ Cobb angle decreased in both groups, and the reduction was greater in the single-door laminoplasty combined with lateral mass screw fixation group(P<0.05). There was a significant increase in C₂-C₇ SVA in the single-door laminoplasty group(P<0.05) and no significant change the single-door laminoplasty combined with lateral screw fixation group(P>0.05). CONCLUSION Posterior cervical laminoplasty with unilateral lateral mass screw fixation combined with single-door vertebral plate shaping surgery improves the neurological function and quality of life in patients with cervical spondylotic myelopathy complicated by ossification of the posterior longitudinal ligament and cervical instability. Compared with single-door vertebral plate shaping surgery, postoperative cervical lordosis and forward-tilt can be improved.
Humans ; Middle Aged ; Male ; Female ; Laminoplasty/methods* ; Ossification of Posterior Longitudinal Ligament/physiopathology* ; Bone Screws ; Cervical Vertebrae/physiopathology* ; Retrospective Studies ; Joint Instability/surgery*

OBJECTIVE: To explore clinical effect of bone cement-strengthened pedicle screw technique in the correction of stage Ⅲ asymptomatic Kümmell disease with kyphosis. METHODS: A retrospective analysis was conducted on clinical data of 40 asymptomatic stage Ⅲ Kümmell disease patients admitted between March 2019 and December 2021, including 15 males and 25 females, aged from 61 to 81 years old with an average of (67.4±5.2) years old;according to different surgical methods, they were divided into percutaneous kyphoplasty group (PKP) and reinforced screw group. There were 18 patients in PKP group, including 7 males and 11 females, aged from 61 to 78 years old with an average of (66.2±5.5) years old;the courses of disease ranged from 5 to 12 months with an average of (7.33±1.78) months;bone mineral density(BMD) T values ranged from -2.45 to -4.00 with an average of (-3.08±0.46);2 patients with T₈-T₉, 10 patients with T₁₀-T₁₂, and 6 patients with L₁-L₂;treated with PKP. There were 22 patients in reinforced screw group, including 8 males and 14 females, aged from 65 to 81 years old with an average of (68.5±3.8) years old;the courses of disease ranged from 4 to 15 months with an average of (7.86±2.73)months;bone mineral density(BMD) T values ranged from -2.40 to -4.50 with an average of (-3.18±0.54);3 patients with T₈-T₉, 12 patients with T₁₀-T₁₂, and 7 patients with L₁-L₂;treated with bone cement reinforced pedicle screw internal fixation combined with kyphoplasty. Cobb angle and anterior margin height of the injured vertebra were compared before operation, 3 d and 12 months after operation. Visual analogue scale (VAS) and Oswestry disability index (ODI) were compared between two groups before operation and 12 months after operation. The incidence of postoperative complications was compared between two groups. RESULTS: All patients were followed up, PKP group followed up for 11 to 14 months with an average of (11.97±0.96) months and 10 to 14 months with an average of (12.05±1.09) months in reinforced screw group;there was no significant difference between two groups (P>0.05). Postoperative Cobb angle at 3 days and 12 months in reinforced screw group were (7.34±2.26) ° and (18.86±1.96) °, while in PKP group were (18.88±1.89) ° and (23.28±1.90) °;there were statistical difference between two groups (P<0.05). The anterior margin height of the injured vertebra in reinforced screw group were (25.28±1.33) mm and (19.62±2.22) mm at 3 days and 12 months after operation, while in PKP group were (18.61±2.16) mm and(15.93±1.34) mm;there were statistical difference between two groups (P<0.05). Cobb angle and the anterior margin height of the injured vertebra were significantly improved at 3 days and 12 months after operation between two groups (P<0.05). Postoperative VAS and ODI at 12 months in PKP group were (2.00±0.69) score and (13.44±4.02)%, while in reinforced screw group were(1.91±0.61) score and (10.18±4.26)%;which were significantly lower than (6.89±0.76) score and (36.33±3.40)% in PKP group, (7.23±0.75) score and (37.09±3.73) % in reinforced screw group before operation. There were no difference in postoperative VAS between two groups at 12 months (P>0.05);postoperative ODI in reinforced screw group at 12 months was lower than that in PKP group(P<0.05). There was no significant difference in complications between two groups (χ²=0.071, P>0.05). CONCLUSION PKP and bone cement reinforced nail combined with PKP could improve kyphotic deformity and postoperative function, and relieve pain. The application of bone cement-reinforced nail fixation technology could provide a more stable support, more obvious functional recovery, lower the risk of re-collapse of the injured vertebra, and maintain the long-term stability of spine.
Humans ; Male ; Female ; Aged, 80 and over ; Kyphosis/surgery* ; Aged ; Bone Cements ; Middle Aged ; Retrospective Studies ; Pedicle Screws ; Spinal Fractures/surgery* ; Fracture Fixation, Internal/methods* ; Bone Screws ; Kyphoplasty

OBJECTIVE: To establish a two-segment vertebrectomy model using the finite element method, and to measure and compare the biomechanical properties of the lower cervical anterior transpedicular root screw (ATPRS) plate system, lower cervical anterior pedicle screw (ATPS) plate system, and lower cervical anterior cervical locked-plate (ACLP) system on this model. METHODS: CT data of the cervical spine (C₀-T₁) from a 34-year-old healthy adult male volunteer were collected. A nonlinear complete model of the lower cervical spine (C₃-C₇) was established using Mimics 10.01 software, based on which the ATPRS fixation model, ATPS fixation model, and ACLP fixation model were constructed respectively. An axial pressure of 75 N and a pure couple moment of 1.5 N·m were applied to C3 to make the model perform flexion-extension, left-right lateral bending, and left-right rotation movements. The range of motion (ROM) and stress distribution of each model under different working conditions were compared. RESULTS: The ROM of the C₄-C₇ segments in the ACLP group, ATPS group, and ATPRS group was reduced to 0.65° (-95.2%), 0.58° (-95.7%), and 0.62° (-95.4%) respectively compared with the intact model during flexion-extension movement;during lateral bending movement, it was reduced to 0.58° (-95.2%), 0.51°(-95.8%), and 0.60° (-95.1%) respectively;during rotation movement, it was reduced to 1.17° (-89.6%), 1.26° (-88.8%), and 1.27°(-88.7%) respectively. In terms of the stress on the titanium mesh graft, the ATPS group and ATPRS group had the maximum load during extension and the minimum load during flexion. Compared with the ACLP group, the stress on the titanium mesh graft in ATPS and ATPRS decreased by (-33.7%) and (-15.8%) in flexion, (-29.4%) and (-13.2%) in extension, (-26.2%) and (-23.4%) in lateral bending, and (-18.8%) and (-5.4%) in rotation, respectively. In terms of bone-screw interface stress, the peak bone stress near the C₇ screw in the ACLP group, ATPS group, and ATPRS group increased by 49.2%, 45.0%, and 47.6% respectively compared with the peak bone stress near the C₄ screw during extension. However, during flexion and lateral bending, there was no significant difference in the peak bone stress near the C₄ and C₇ screws. During rotation, the difference between the peak bone stress near the C₄ screw and that near the C₇ screw showed that in the ACLP group, left rotation (37.6%) was similar to right rotation (36.7%), while in the ATPS group and ATPRS group, left rotation was lower than right rotation. CONCLUSION Compared with the ACLP group, the ATPS group and ATPRS group have greater fixation stiffness and more stable fixation. However, in rotational movement, due to the uneven distribution of fixation stiffness, the stress distribution during torsion is uneven, but it is still better than the ACLP group. This indicates that ATPRS, like ATPS, has good primary stability, providing favorable conditions for bone graft fusion.
Humans ; Finite Element Analysis ; Male ; Cervical Vertebrae/physiopathology* ; Adult ; Biomechanical Phenomena ; Bone Plates ; Bone Screws ; Range of Motion, Articular ; Fracture Fixation, Internal

PURPOSE: Hoffa fracture is a femoral condyle fracture in the coronal plane. The lateral condyle is more commonly involved. The diagnosis is often difficult to detect with routine radiographs. Conservative management in this type of fracture resulted in nonunion, malunion, and other complications, such as stiff knee. Therefore, surgical management is mandatory in displaced fractures. Previous studies suggest only application of cancellous screw fixation, but these are not enough to counter vertical shear stress. Therefore, this study will evaluate the clinical outcomes of open reduction and internal fixation of Letenneur type I Hoffa fracture using cancellous screws with posterior buttressing plate. METHOD: This was a prospective cohort study conducted from March 2017 to July 2022 in orthopaedics department of tertiary care center after approval of institutional ethical committee. The study included 36 patients with Letenneur type I fractures treated by open reduction and internal fixation using posterior buttress plate and cancellous screws. Radiographs and clinical outcomes, range of movement (ROM), bone union, and knee society score (KSS) of patients were assessed at the end of 4 and 12 months in the follow-ups. All statistical analysis was done using Epi info version 7.2.1.0. RESULTS: In the 36 patients with Letenneur type I fracture, the majority belong to younger age group between 25 and 54 years with 22 males and 14 females. The modes of injury were road traffic accidents in 25 patients and fall from height in 11 patients. The right knee was involved in 21 cases and left was involved in 15 cases. Lateral condyle involvement was seen in 27 cases and medial condyle in 9 cases. All 36 patients with Letenneur type I Hoffa fracture were evaluated 4 months after surgical intervention. The notable improvements were observed in terms of ROM 120.4° ± 5.0° and KSS 85.0 ± 4.2. At the 12-month follow-up, considerably better outcomes were maintained regarding ROM 128.1° ± 5.2° and KSS 89.3 ± 4.8 with p < 0.05 which was statistically significant. At the final follow-up, all patients had routine fracture healing with a union time of (3.2 ± 3.4) months. CONCLUSIONS Fixation of Letenneur type I Hoffa fracture with cancellous screws and posterior buttress plate is effective, reliable and capable of providing adequate stability. Buttress plate assisted fixation is a valuable enhancement of the conventional technique of lag screw fixation of Hoffa fractures.
Humans ; Bone Plates ; Male ; Female ; Fracture Fixation, Internal/instrumentation* ; Adult ; Prospective Studies ; Middle Aged ; Femoral Fractures/surgery* ; Bone Screws ; Range of Motion, Articular ; Young Adult ; Aged ; Hoffa Fracture

PURPOSE: Percutaneous ilio-sacral screw (ISS) insertion using conventional C-arm fluoroscopy has been a widely employed technique for pelvic posterior ring fixation, particularly in developing regions. However, this approach presents technical challenges, leading to a high malposition rate. We introduced a new method for ISS insertion without additional equipment or software and suggested whether it could reduce the malposition rate and operating time. METHODS: This is a retrospective cohort study. The study included all patients who underwent percutaneous ISS fixation between January 2020 and December 2022. Patients treated with open reduction or other types of implants were excluded. The patients were divided into 2 groups based on the screw insertion method: Group A utilized the traditional dual-plane adjustment method, while Group B received the newly introduced method. In all cases, conventional C-arm fluoroscopy was the sole guidance during the surgical procedure. Malposition rate, radiation exposure, and operating time were compared between groups. Post-operative CT scans were used to assess screw accuracy using the Smith grading method. The Student's t-test or the Mann-Whitney U test was chosen for comparing the quantitative variables based on the normality test results. The Chi-squared test was utilized for comparing qualitative variables. RESULTS: A total of 72 patients with pelvic posterior ring disruption treated with percutaneous ISS under conventional fluoroscopy guidance were included in this study. Among them, 32 patients were in Group A and 40 patients were in Group B. In Group B, the average operation duration per screw was 33 min with 29 fluoroscopy applications, which was significantly lower than that in Group A (44 min, p < 0.001, 38 times, p < 0.001, respectively). Furthermore, the post-operative CT scan revealed that only 10.7% (6/56) of screws in Group B were inappropriately positioned according to the Smith criteria. CONCLUSION The novel method introduced in this study demonstrated a reduction in both malposition rates and operating time compared to the traditional dual-plane adjustment method. Precise pre-operative CT planning in conjunction with conventional fluoroscopy could establish this method as a widely applicable technique for percutaneous ISS fixation.
Humans ; Fluoroscopy/methods* ; Retrospective Studies ; Bone Screws ; Female ; Male ; Tomography, X-Ray Computed/methods* ; Sacrum/diagnostic imaging* ; Middle Aged ; Operative Time ; Adult ; Fracture Fixation, Internal/methods* ; Ilium/diagnostic imaging* ; Aged

PURPOSE: Bone cement-reinforced fenestrated pedicle screws (FPSs) have been widely used in the internal fixation and repair of the spine with osteoporosis in recent years and show significant improvement in fixation strength and stability. However, compared with conventional reinforcement methods, the advantages of bone cement-reinforced FPSs remain undetermined. This article compares the effects of fenestrated and conventional pedicle screws (CPSs) combined with bone cement in the treatment of osteoporosis. METHODS: A clinical control study of FPSs and CPSs combined with bone cement reinforcement in osteoporotic vertebral internal fixation was performed using the database PubMed, Embase, Cochrane Library, CNKI, the Wanfang, and the China Biomedical Literature Service System. Two evaluators screened the relevant literature in strict accordance with the inclusion criteria (diagnosis of participants, type of clinical study, treatment with FPS and CPS, and outcome indicators) and exclusion criteria (duplicate literature and missing or incorrect data) and independently conducted data extraction and quality evaluation. Clinical control studies of direct comparison between FPS and CPS combined with bone cement reinforcement in patients who were definitively diagnosed with thoracolumbar fractures or spinal degenerative diseases were included. Quality evaluation was conducted using the Cochrane risk bias evaluation tool for randomized controlled studies and using the Newcastle-Ottawa scale for retrospective case-control studies. RevMan software (version 5.3) was used for the meta-analysis to compare the clinical efficacy, radiological results, and related complications of the 2 methods. RESULTS: A total of 13 articles were included, including 7 randomized controlled studies and 6 retrospective case-control studies. There were 909 patients in these studies, 451 in the FPS and polymethyl methacrylate (FPS & PMMA) group and 458 in the CPS and polymethyl methacrylate (CPS & PMMA) group. The results of the meta-analysis showed that there was no significant difference between the 2 groups in operation time, hospital stay, visual analogue score, Japanese orthopaedic association score, Oswestry disability index score, Cobb angle, vertebral body deformation index and fusion rate (p > 0.05). The mean difference of intraoperative bleeding volume was -10.45, (95% confidence intervals (CI) (-16.92, -3.98), p = 0.002), the mean difference of loss height of the anterior edge of the vertebral body after surgery was -0.69 (95% CI (-0.93, -0.44), p < 0.001), and the relative risk (RR) of overall complication rate was 0.43 (95% CI (0.27, 0.68), p < 0.001), including the RR of bone cement leakage rate was 0.57 (95% CI (0.39, 0.85), p = 0.005). The screw loosening rate (RR = 0.26, 95% CI (0.13, 0.54), p < 0.001) of the FPS group was significantly lower than that of the CPS group. CONCLUSION The existing clinical evidence shows that compared with the CPS combined with bone cement, the use of FPS repair in the internal fixation of an osteoporotic vertebral body can reduce the amount of intraoperative bleeding, be more conducive to maintaining the height of the vertebral body, and significantly reduce the incidence of postoperative complications such as bone cement leakage and screw loosening.
Humans ; Pedicle Screws ; Bone Cements ; Spinal Fractures/surgery* ; Osteoporotic Fractures/surgery* ; Fracture Fixation, Internal/instrumentation*

PURPOSE: The fixation method commonly employed worldwide for treating unstable fractures of the posterior pelvic ring is the percutaneous iliosacral screw technique. However, prolonged operation time and frequent fluoroscopies result in surgical risks. This study aimed to investigate whether a new triangulation method could reduce operative and fluoroscopy times and increase the accuracy of screw placement. METHODS: This study is a real-world retrospective cohort analysis that examined a patient cohort who underwent percutaneous iliosacral screw fixation between January 1, 2019 and December 31, 2022. Inclusion criteria were patients (1) diagnosed with posterior pelvic ring instability who underwent pelvic fracture closed reduction and percutaneous S1 transverse-penetrating iliosacral screw placement and (2) aged >18 years. Exclusion criteria were: (1) combined proximal femoral fractures, (2) severe soft tissue injury in the surgical area, (3) incomplete imaging data, and (4) declining to provide written informed consent by the patient. The patients were divided into 2 groups according to the screw insertion method: conventional and triangulation methods. Screw placement and fluoroscopy times recorded by the C-arm were compared between the 2 methods. The accuracy of screw placement was evaluated by Smith grading on postoperative CT. Normality tests were conducted to assess the distribution of the quantitative variables and the Chi-square test was used to compare the qualitative variables. RESULTS: The study included a total of 94 patients diagnosed with posterior pelvic ring instability, who underwent percutaneous iliosacral screw placement. The patients were divided into 2 groups: 46 patients treated with the conventional surgical method and 48 patients received the triangulation method. The operation time (61.13±9.69 vs. 35.77±6.27) min and fluoroscopy frequency times (52.15±9.29 vs. 24.40±4.04) of the triangulation method were significantly reduced (p<0.001). CONCLUSIONS The use of a triangular positioning technique for the surface positioning of percutaneous iliosacral screws could reduce the operative time and fluoroscopy frequency. And the screw placement accuracy using this new method was comparable to that using other conventional methods.
Humans ; Retrospective Studies ; Bone Screws ; Pelvic Bones/surgery* ; Male ; Female ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Adult ; Middle Aged ; Fluoroscopy ; Aged ; Sacrum/surgery* ; Operative Time