OBJECTIVE: To investigate the prenatal manifestation and genetic basis for two fetuses suspected for Osteocraniostenosis (OCS). METHODS: Two fetuses undergoing invasive prenatal diagnosis at Cangzhou People's Hospital in April and August 2021 for short long bones and abnormal skull morphology were selected as the study subjects. Clinical data were collected and analyzed. Genomic DNA was extracted from amniotic fluid and peripheral blood samples of the two couples. Candidate variants were validated by Sanger sequencing. Literature was retrieved from CNKI, Wanfang Data Knowledge Service Platform and PubMed using keywords including "FAM111A gene", "gracile bone dysplasia", "FAM111A" and "osteocraniostenosis" from January 1, 2000 to June 30, 2025. This study was approved by the Medical Ethics Committee of the hospital (Ethics No.: K2020-049). RESULTS: Fetus 1 was found to have short limbs, abnormal skull morphology and shallow cerebral sulci. Fetus 2 showed short limbs, irregular skull halo, prominent forehead and bilateral frontal narrowing. Trio-WES revealed that fetus 1 has carried a heterozygous missense variant c.1582G>C (p.Asp528His) in exon 4 of the FAM111A gene, which was unreported previously. Fetus 2 has harbored a heterozygous in-frame deletion c.1020_1022delTTC (p.Ser343del) in exon 6 of the FAM111A gene, which has been recorded as likely pathogenic by the ClinVar and HGMD databases. Sanger sequencing confirmed that the parents of both fetuses were wild-type for the variant sites. A total of 9 previously reported patients with FAM111A-related gracile bone dysplasia/OCS from 4 publications were retrieved. The main clinical features included intrauterine growth restriction, hypomineralized skull, gracile long bones with narrow medullary cavities and characteristic facial anomalies, which were in large in keeping with the prenatal features of the two fetuses. CONCLUSION Both fetuses were diagnosed with FAM111A-related OCS based on the characteristic prenatal findings and identification of the FAM111A variants. Above finding expanded the phenotypic spectrum of FAM111A-associated disorders and provided clues for the prenatal diagnosis and genetic counseling.
Humans ; Female ; Pregnancy ; Prenatal Diagnosis ; Phenotype ; Fetus ; Male ; Bone Diseases, Developmental/genetics* ; Adult

INTRODUCTION: Rheumatoid arthritis (RA) is associated with heightened cardiovascular disease and increased susceptibility to osteoporosis, with shared underlying mechanisms. This study aimed to investigate the association between vascular function and bone mineral density (BMD). METHODS: We conducted a cross-sectional study of 49 patients with RA at Tan Tock Seng Hospital, Singapore. Endothelial function was measured as reactive hyperaemia index (RHI)-endothelial peripheral arterial tonometry and aortic stiffness as carotid-femoral pulse wave velocity (cf-PWV) using SphygmoCor. Univariable and multivariable linear regression analyses were performed to evaluate the associations between BMD and vascular function. We used natural logarithm RHI (lnRHI) and cf-PWV as response variables, and each BMD as covariate, adjusting for body mass index, positive anti-cyclic citrullinated peptide, cumulative prednisolone dose, hydroxychloroquine use and Systematic COronary Risk Evaluation 2. RESULTS: We recruited 49 patients (mean age 61.08 ± 8.20 years), of whom 44 (89.80%) were women and 39 (81.25%) were Chinese. Significant associations were found between lnRHI and BMD at the lumbar spine (β = 0.4289, P = 0.037) and total hip (β = 0.7544, P = 0.014) in univariable analyses. Multivariable analyses confirmed these associations, showing that lower BMD at the lumbar spine (β = 0.7303, P = 0.001), femoral neck (β = 0.8694, P = 0.030) and total hip (β = 0.8909, P = 0.010) were significantly associated with worse lnRHI. No significant associations were found between BMD and cf-PWV. CONCLUSION Lower BMD is associated with endothelial dysfunction, but not aortic stiffness in patients with RA. Further longitudinal studies are needed to confirm these associations and understand the underlying mechanisms.
Humans ; Arthritis, Rheumatoid/complications* ; Female ; Male ; Bone Density ; Middle Aged ; Cross-Sectional Studies ; Vascular Stiffness ; Aged ; Singapore ; Pulse Wave Analysis ; Osteoporosis/complications* ; Endothelium, Vascular/physiopathology* ; Cardiovascular Diseases/complications* ; Carotid-Femoral Pulse Wave Velocity ; Hyperemia

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

OBJECTIVE: To review the current research status on the diagnosis and treatment of fracture-related infection (FRI). METHODS: The research literature in the field of FRI both domestically and internationally in recent years were widely reviewed, and the research progress of FRI from the aspects of definition and classification, epidemiological characteristics, diagnosis and treatment elaborated, in order to provide reference for clinical practices. RESULTS: In recent years, specific classifications for FRI have gradually emerged. FRI is characterized by high incidence, high recurrence, high disability rates, and significant economic costs. Key diagnostic points include clinical signs and symptoms, imaging tests, serological biomarkers, pathogen identification, and histopathological examination. Treatment principles encompass debridement, management of implants (retention or removal), systemic and local antibiotic use, reconstruction of bone and soft tissue defects, and functional and psychological rehabilitation. CONCLUSION Although FRI is a catastrophic complication following limb bone trauma, early precise diagnosis and standardized treatment are key to improving cure rates, reducing recurrence, and enhancing patients' quality of life.
Humans ; Fractures, Bone/complications* ; Bone Diseases, Infectious/therapy* ; Debridement/methods* ; Anti-Bacterial Agents/therapeutic use* ; Orthopedic Procedures/methods*

PURPOSE: To investigate the incidence and influencing factors of bone loss in patients with spinal cord injury (SCI). METHODS: A retrospective case-control study was conducted. Patients with SCI in our hospital from January 2019 to March 2023 were collected. According to the correlation between bone mineral density (BMD) at different sites, the patients were divided into the lumbar spine group and the hip joint group. According to the BMD value, the patients were divided into the normal bone mass group (t > -1.0 standard deviation) and the osteopenia group (t ≤ -1.0 standard deviation). The influencing factors accumulated as follows: gender, age, height, weight, cause of injury, injury segment, injury degree, time after injury, start time of rehabilitation, motor score, sensory score, spasticity, serum value of alkaline phosphatase, calcium, and phosphorus. The trend chart was drawn and the influencing factors were analyzed. SPSS 26.0 was used for statistical analysis. Correlation analysis was used to test the correlation between the BMD values of the lumbar spine and bilateral hips. Binary logistic regression analysis was used to explore the influencing factors of osteoporosis after SCI. p < 0.05 was considered statistically significant. RESULTS: The incidence of bone loss in patients with SCI was 66.3%. There was a low concordance between bone loss in the lumbar spine and the hip, and the hip was particularly susceptible to bone loss after SCI, with an upward trend in incidence (36% - 82%). In this study, patients with SCI were divided into the lumbar spine group (n = 100) and the hip group (n = 185) according to the BMD values of different sites. Then, the lumbar spine group was divided into the normal bone mass group (n = 53) and the osteopenia group (n = 47); the hip joint group was divided into the normal bone mass group (n = 83) and the osteopenia group (n = 102). Of these, lumbar bone loss after SCI is correlated with gender and weight (p = 0.032 and < 0.001, respectively), and hip bone loss is correlated with gender, height, weight, and time since injury (p < 0.001, p = 0.015, 0.009, and 0.012, respectively). CONCLUSIONS The incidence of bone loss after SCI was high, especially in the hip. The incidence and influencing factors of bone loss in the lumbar spine and hip were different. Patients with SCI who are male, low height, lightweight, and long time after injury were more likely to have bone loss.
Humans ; Spinal Cord Injuries/complications* ; Male ; Female ; Retrospective Studies ; Incidence ; Adult ; Bone Density ; Middle Aged ; Case-Control Studies ; Osteoporosis/etiology* ; Lumbar Vertebrae ; Bone Diseases, Metabolic/etiology* ; Aged ; Risk Factors

OBJECTIVE: To investigate the clinical application value of artificial intelligence (AI)-based bone marrow cell recognition and analysis system in the diagnosis of hematological diseases. METHODS: The bone marrow smears of hematological patients who were admitted to The Second Hospital of Shanxi Medical University from 2018 to 2020 were retrospectively analyzed. A total of 115 bone marrow smears with clear diagnosis and typical cell morphology characteristics were selected, including 20 cases of immune thrombocytopenia(ITP), 11 cases of iron deficiency anemia (IDA), 17 cases of megaloblastic anemia (MA), 20 cases of chronic myeloid leukemia (CML), 17 cases of acute lymphoblastic leukemia (ALL), 23 cases of acute promyelocytic leukemia (APL), and 7 cases of acute myeloid leukemia unclassified (AML-M2). The samples were analyzed by manual microscopic examination, AI automatic recognition, and manual correction after AI recognition. RESULTS: The images captured by the AI device were clear, and the cell morphological structures were distinct. The average experimental diagnostic efficiency parameters of the bone marrow nucleated cells classified in this system were calculated. The sensitivity was 74.90%, specificity was 99.03%, and accuracy was 98.29%. In the comparison between the AI recognition group and the manual examination group, the data of IDA, ITP, MA, and CML diseases were all greater than 0.85 in ICC correlation coefficient, with excellent consistency; the data of APL, AML-M2, and ALL three diseases were between 0.6 and 0.85 in ICC correlation coefficient, with moderate consistency. However, after manual review and correction, the ICC correlation coefficient between the data of the AI correction group and the data from the manual examination group was greatly improved. CONCLUSION The AI bone marrow cell recognition and analysis system has the characteristics of high accuracy, high specificity, good sensitivity and fast detection. When used in combination with manual review, it can improve the detection efficiency of bone marrow cells morphological analysis and meet the needs of clinical work.
Humans ; Artificial Intelligence ; Hematologic Diseases/diagnosis* ; Bone Marrow Cells/pathology* ; Retrospective Studies

OBJECTIVES: To propose a single repetition time (TR) quantitative magnetic susceptibility imaging method for the lumbar spine using bipolar readout gradient, and compare the quantitative magnetic susceptibility measurement using single TR and dual TR methods for the lumbar spine with different bone densities. METHODS: A translation correction method was proposed to correct spatial misalignment along the frequency encoding direction between positive and negative gradient readout images, and the phase difference between the images was eliminated using a phase correction method. The data of lumbar vertebrae L1-L5 were collected using single TR and dual TR methods from 6 normal individuals, 2 patients with osteopenia, and 2 patients with osteoporosis. The magnetic susceptibility map was reconstructed, the quantitative results of single TR before and after correction were compared with those of the dual TR method. RESULTS: The linear regression result of the lumbar spine magnetic susceptibility values obtained by the single TR method before calibration and the dual TR method is Y=0.64*X-11.61. The linear regression result of the lumbar spine magnetic susceptibility values corrected by the single TR method and the dual TR method is Y=1.03*X+0.25. The results of the corrected single TR method were highly consistent with those of the dual TR method, and the calibrated single TR method could effectively distinguish osteopenia and osteoporosis patients from normal individuals. CONCLUSIONS The calibrated single TR bipolar readout gradient method can generate artifact-free lumbar spine quantitative magnetic susceptibility distribution maps and reduce data acquisition time by 50%.
Humans ; Lumbar Vertebrae/pathology* ; Magnetic Resonance Imaging/methods* ; Female ; Middle Aged ; Male ; Osteoporosis/diagnosis* ; Adult ; Bone Density ; Aged ; Bone Diseases, Metabolic/diagnosis*

Langerhans cell histiocytosis of bone is a rare tumor disease characterized by the large accumulation of CD1a⁺ and CD207⁺ dendritic cells in tissues of unknown cause.It mainly occurs in children aged 1-4 years old,with incidences of 4-6 per million in children and 1-2 per million in adults.Due to its low incidence,diverse clinical manifestations,and no obvious specificity of imaging manifestations,the definitive diagnosis and early treatment of this type of tumor are challenging.In this paper,we report 8 cases of Langerhans cell histiocytosis of bone and review the relevant literature published in the past five years to summarize the clinical characteristics,pathological features,diagnosis,treatment,and prognosis of this disease.
Humans ; Bone Diseases/therapy* ; Histiocytosis, Langerhans-Cell/therapy*

OBJECTIVE: To explore the genetic etiology of fetal skeletal dysplasia using whole exome sequencing (WES) and copy number variation sequencing (CNV-seq) techniques, and the feasibility of using WES as the first-tier method for such fetuses. METHODS: Seventy four fetuses with skeletal dysplasia detected by prenatal ultrasound at the Genetic Testing Center of the Women and Children's Hospital Affiliated to Qingdao University from January 2020 to August 2024 were selected as the study subjects. Fetal muscle and peripheral blood samples of the pregnant women and their spouses were collected and subjected to WES analysis. CNV-seq was carried out on all fetal muscle tissue samples. And the results were compared with the CNVs indicated by WES. Genetic etiologies were analyzed across different subtypes of skeletal dysplasia. And the feasibility of using WES as the first-tier genetic test for similar fetuses was assessed, in addition with a systematic cost-effectiveness analysis. This study was approved by the Medical Ethics Committee of the Hospital (Ethics No.: QFELL-YJ-2024-201). RESULTS: A total of 50 fetuses were diagnosed, which yielded a diagnostic rate of 67.57%. These included 6 chromosomal aneuploidies, 4 chromosomal CNVs and 40 monogenic disorders. The monogenic diseases had involved 46 variant sites in 23 pathogenic genes, among which 12 were unreported previously, including MYH3: c.735T>C, ALPL: c.1324C>T, NEK9: c.1973G>A, MAGEL2: c.2024_2025del, LMBR1: c.423+4914A>C, NEB: c.21273_21276del, COL1A1: c.2651G>C and c.2758G>C, ASPM: c.2473delinsGA, TBX5: c.704G>A, DYNC2H1: c.10893del, and DYNC2I2: c.1270C>T. Substantial concordance was reached between WES-derived CNV calls and CNV-seq findings. No clinically significant CNV was exclusively detected by CNV-seq. Cost-effectiveness modeling demonstrated that implementing WES as the first-tier genetic testing method could reduce the total expenditure when WES unit cost remained below 6.4 folds that of the CNV-seq. CONCLUSION Genetic variants including single nucleotide variations (SNV) of monogenic disorders, chromosomal aneuploidies and genomic CNVs are important causes for fetal skeletal dysplasia. WES is an accurate and efficient method for analyzing the etiology of fetal skeletal dysplasia, particularly in those with a family history of similar phenotype or maternal history of adverse pregnancies.
Humans ; Exome Sequencing/methods* ; Female ; Pregnancy ; DNA Copy Number Variations/genetics* ; Genetic Testing/methods* ; Prenatal Diagnosis/methods* ; Adult ; Male ; Fetus ; Bone Diseases, Developmental/diagnosis* ; Ultrasonography, Prenatal

Humans ; Spinal Fractures/etiology* ; Fractures, Compression/etiology* ; Osteoporotic Fractures/complications* ; Vertebroplasty/adverse effects* ; Bone Diseases, Metabolic/complications* ; Punctures/adverse effects* ; Treatment Outcome ; Bone Cements ; Retrospective Studies