Oral squamous cell carcinoma (OSCC) is a common head and neck malignancy. Approximately 50% to 60% of patients with OSCC are diagnosed at a locally advanced stage (clinical staging III-IVa). Even with comprehensive and sequential treatment primarily based on surgery, the 5-year overall survival rate remains below 50%, and patients often suffer from postoperative functional impairments such as difficulties with speaking and swallowing. Programmed death receptor-1 (PD-1) inhibitors are increasingly used in the neoadjuvant treatment of locally advanced OSCC and have shown encouraging efficacy. However, clinical practice still faces key challenges, including the definition of indications, optimization of combination regimens, and standards for efficacy evaluation. Based on the latest research advances worldwide and the clinical experience of the expert group, this expert consensus systematically evaluates the application of PD-1 inhibitors in the neoadjuvant treatment of locally advanced OSCC, covering combination strategies, treatment cycles and surgical timing, efficacy assessment, use of biomarkers, management of special populations and immune related adverse events, principles for immunotherapy rechallenge, and function preservation strategies. After multiple rounds of panel discussion and through anonymous voting using the Delphi method, the following consensus statements have been formulated: 1) Neoadjuvant therapy with PD-1 inhibitors can be used preoperatively in patients with locally advanced OSCC. The preferred regimen is a PD-1 inhibitor combined with platinum based chemotherapy, administered for 2-3 cycles. 2) During the efficacy evaluation of neoadjuvant therapy, radiographic assessment should follow the dual criteria of Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 and immune RECIST (iRECIST). After surgery, systematic pathological evaluation of both the primary lesion and regional lymph nodes is required. For combination chemotherapy regimens, PD-L1 expression and combined positive score need not be used as mandatory inclusion or exclusion criteria. 3) For special populations such as the elderly (≥ 70 years), individuals with stable HIV viral load, and carriers of chronic HBV/HCV, PD-1 inhibitors may be used cautiously under the guidance of a multidisciplinary team (MDT), with close monitoring for adverse events. 4) For patients with a poor response to neoadjuvant therapy, continuation of the original treatment regimen is not recommended; the subsequent treatment plan should be adjusted promptly after MDT assessment. Organ transplant recipients and patients with active autoimmune diseases are not recommended to receive neoadjuvant PD-1 inhibitor therapy due to the high risk of immune related activation. Rechallenge is generally not advised for patients who have experienced high risk immune related adverse events such as immune mediated myocarditis, neurotoxicity, or pneumonitis. 5) For patients with a good pathological response, individualized de escalation surgery and function preservation strategies can be explored. This consensus aims to promote the standardized, safe, and precise application of neoadjuvant PD-1 inhibitor strategies in the management of locally advanced OSCC patients.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

Objective To investigate the the effects of fracture fragment size and fixation method on biomechanical stability of distal tibial epiphyseal injuries in children.Methods A three-dimensional(3D)finite element model of a Salter-Harris Ⅱ(SH-Ⅱ)epiphyseal injury with fracture fragments of varying sizes(Small,Middle,Big)was constructed using computed tomography(CT)data from the lower limb of a 10-year-old volunteer.and bone-internal fixation assemblies were created with 1-3 screws(1 S group,2 S group,3 S group)and Kirschner wire(K group).The model was subjected to gravitational forces,posterior drawer forces,and external rotation.Displacement and stress distributions on fracture fragments and fixation devices were analyzed.Results The maximum displacement for the four groups of models was concentrated at the distal end of the fracture fragment.Under gravity conditions,the maximum displacement of the distal end of the fracture fragment in the 1 S,2 S,3 S and K models in Small group was 5.69,5.57,5.56,0.11 mm,respectively,and the bone stress was 16.95,12.26,8.57 and 5.00 MPa,respectively.A high stress area at the epiphyseal plate and the fracture line was easily formed under screw fixation,while a high stress area at the edge of the epiphyseal plate was formed under Kirschner wire fixation.Conclusions When distal tibial epiphyseal injuries in children are treated by using screws,increasing the number of screws can improve the fixation stability and share local bone stress,but the connection area between the fracture fragment and the epiphyseal plate cannot be too small.Kirschner wire fixation can provide better biomechanical effects than screw fixation.

Objective To conduct a bibliometric analysis of relevant literature on liver failure caused by viral hepatitis from the past five years,and to help researchers understand the current status and hotspots in this field,and to provide insights into future research trends.Methods Based on the Science Citation Index Expanded(SCI-Expanded)data from Web of Science Core Collection,visualization analysis and mapping were conducted through VOSviewer and CiteSpace software to generate visual representations of international research collaboration networks,keyword co-occurrence clustering,and keyword bursts.Results From 2019 to 2023,a total of 873 relevant literature were included,with a total citation frequency of 7 364 and an average citation frequency of 8.44.Among them,China had the highest number of publications(458 articles,52.46%)and had the most cooperation with the United States.The research hotspots of viral hepatitis induced liver failure were mainly divided into three categories:basic and clinical research on liver failure caused by non-hepatitis B virus(HBV),the pathogenesis of HBV related liver failure,and treatment and prediction models of liver failure.The keyword time overlay map and burst map showed that the research hotspots had gradually shifted from the prevention and control of new infections to the treatment and prognosis assessment of patients with chronic infection.Conclusion China is a major international research entity in liver failure caused by viral hepatitis and actively participates in international scientific collaborations.The research hotspots on liver failure caused by viral hepatitis have gradually shifted from preventing viral hepatitis infections and expanding treatment options to the treatment of chronic infection patients and prognostic prediction.

Objective To develop a novel type of transparent simulation manikin as a surgical training model to meet the surgical treatment demand on the medical train.Methods A transparent manikin was developed with the steps of basic data collection,motherboard design and manufacture and module production and assembly.Firstly,basic data collection was carried out with reference to standardized human anatomy and parameters.Secondly,some software such as UG NX7.5 was used to construct the motherboard of the manikin.Finally,module production and assembly were performed with the materials of acrylic,transparent rubber,silicone and hydrogel and the technology of silicone infusion.Results The transparent manikin developed had its anatomy structure close to that of the real body and high visuality for its internal and external components,which simulated a variety of war wounds and thus could be integrated with the surgical training scenarios on the medical train effectively.Conclusion The transparent manikin developed is characterized by high visuality,modularity and blood flow,and meets the demands for surgical training on the medical train.[Chinese Medical Equipment Journal,2025,46(6):111-115]

Objective To investigate the the effects of fracture fragment size and fixation method on biomechanical stability of distal tibial epiphyseal injuries in children.Methods A three-dimensional(3D)finite element model of a Salter-Harris Ⅱ(SH-Ⅱ)epiphyseal injury with fracture fragments of varying sizes(Small,Middle,Big)was constructed using computed tomography(CT)data from the lower limb of a 10-year-old volunteer.and bone-internal fixation assemblies were created with 1-3 screws(1 S group,2 S group,3 S group)and Kirschner wire(K group).The model was subjected to gravitational forces,posterior drawer forces,and external rotation.Displacement and stress distributions on fracture fragments and fixation devices were analyzed.Results The maximum displacement for the four groups of models was concentrated at the distal end of the fracture fragment.Under gravity conditions,the maximum displacement of the distal end of the fracture fragment in the 1 S,2 S,3 S and K models in Small group was 5.69,5.57,5.56,0.11 mm,respectively,and the bone stress was 16.95,12.26,8.57 and 5.00 MPa,respectively.A high stress area at the epiphyseal plate and the fracture line was easily formed under screw fixation,while a high stress area at the edge of the epiphyseal plate was formed under Kirschner wire fixation.Conclusions When distal tibial epiphyseal injuries in children are treated by using screws,increasing the number of screws can improve the fixation stability and share local bone stress,but the connection area between the fracture fragment and the epiphyseal plate cannot be too small.Kirschner wire fixation can provide better biomechanical effects than screw fixation.

Objective To conduct a bibliometric analysis of relevant literature on liver failure caused by viral hepatitis from the past five years,and to help researchers understand the current status and hotspots in this field,and to provide insights into future research trends.Methods Based on the Science Citation Index Expanded(SCI-Expanded)data from Web of Science Core Collection,visualization analysis and mapping were conducted through VOSviewer and CiteSpace software to generate visual representations of international research collaboration networks,keyword co-occurrence clustering,and keyword bursts.Results From 2019 to 2023,a total of 873 relevant literature were included,with a total citation frequency of 7 364 and an average citation frequency of 8.44.Among them,China had the highest number of publications(458 articles,52.46%)and had the most cooperation with the United States.The research hotspots of viral hepatitis induced liver failure were mainly divided into three categories:basic and clinical research on liver failure caused by non-hepatitis B virus(HBV),the pathogenesis of HBV related liver failure,and treatment and prediction models of liver failure.The keyword time overlay map and burst map showed that the research hotspots had gradually shifted from the prevention and control of new infections to the treatment and prognosis assessment of patients with chronic infection.Conclusion China is a major international research entity in liver failure caused by viral hepatitis and actively participates in international scientific collaborations.The research hotspots on liver failure caused by viral hepatitis have gradually shifted from preventing viral hepatitis infections and expanding treatment options to the treatment of chronic infection patients and prognostic prediction.

Objective To develop a novel type of transparent simulation manikin as a surgical training model to meet the surgical treatment demand on the medical train.Methods A transparent manikin was developed with the steps of basic data collection,motherboard design and manufacture and module production and assembly.Firstly,basic data collection was carried out with reference to standardized human anatomy and parameters.Secondly,some software such as UG NX7.5 was used to construct the motherboard of the manikin.Finally,module production and assembly were performed with the materials of acrylic,transparent rubber,silicone and hydrogel and the technology of silicone infusion.Results The transparent manikin developed had its anatomy structure close to that of the real body and high visuality for its internal and external components,which simulated a variety of war wounds and thus could be integrated with the surgical training scenarios on the medical train effectively.Conclusion The transparent manikin developed is characterized by high visuality,modularity and blood flow,and meets the demands for surgical training on the medical train.[Chinese Medical Equipment Journal,2025,46(6):111-115]

Objective To carry out quality control testing of anesthesia ventilators to ensure the reliability and safety during their clinical use.Methods Totally 88 anesthesia ventilators used in some hospital underwent quality control testing in terms of tidal volume,peak airway pressure and positive end-expiratory pressure by using a gas flow analyzer according to JJF(E)61-2020 Calibration Specification of Anesthetic Machines,which included 31 ones,36 ones,12 ones and 9 ones respectively from brand A,B,C and D.The Kruskal-Wallis test was used to analyze the variability of the measured values and errors of the performance indicators between different brands of anesthesia ventilators,the chi-square test was applied to discussing the variability of the accuracy class of the performance indicators between different brands of anesthesia ventilators,and the Pearson correlation coefficient was adopted to investigate the correlation between the years of use and the absolute values of the relative errors of the performance indicators.Results The 88 anesthesia ventilators had the overall pass rate for quality control testing being 42.05%,of which,brand B had the highest pass rate(52.78%)and brand C had the lowest pass rate(8.33%).Brand B gained advantages in tidal volume when compared with brand A,C and D,with the differences being significant(P<0.05);brand A behaved the best in peak airway pressure and positive end-expiratory pressure when compared with brand B,C and D,with the differences being significant(P<0.05).Brand A had the highest proportion(63.08%)of distinction and credit in terms of the three performance indicators.The absolute value of the relative error in tidal volume was positively correlated with the years of use at the 3 measurement points for setting values of 400,600,and 800 mL respectively(P<0.05),and there was a significant correlation between the absolute value of the relative error and the years of use at a peak airway pressure setting of 10 cmH2O(1 cmH2O=98.07 Pa)(P<0.05).Conclusion Quality control testing of anesthesia ventilators contributes to finding the risks during their application,which can be an effective tool to ensure the safety of anesthesia ventilators used in medical institutions.[Chinese Medical Equipment Journal,2025,46(9):75-80]