INTRODUCTION: Postoperative urinary retention (POUR) frequently complicates the course of patients following hip and knee arthroplasty. Intrathecal morphine (ITM) was identified as a significant risk factor for POUR. The objective of this study was to investigate the incidence and risk factors for POUR in fast-track total joint arthroplasty (TJA) under spinal anaesthesia (SA) with ITM. METHODS: We conducted a retrospective study of our institutional joint registry of patients who underwent primary TJA under SA with ITM between October 2017 and May 2021. Preoperative (baseline demographics) and perioperative data were collected. The primary outcome was the incidence of POUR after 8 h or earlier, either due to lack of voiding or according to patient's complaints of bladder distension. Univariate and adjusted analyses were performed to identify predictors of POUR. RESULTS: Sixty-nine patients who underwent total knee arthroplasty (TKA) and 36 patients who underwent total hip arthroplasty (THA) under SA with ITM were included in the study. POUR requiring bladder catheterisation was diagnosed in 21% of patients. Independent predictors of POUR were age over 65 years and male gender. CONCLUSIONS SA with ITM for TJA is associated with high rates of POUR in males older than 65 years of age. Other previously identified risk factors such as intraoperative fluid administration or comorbidities may not be as influential.
Humans ; Retrospective Studies ; Male ; Urinary Retention/epidemiology* ; Arthroplasty, Replacement, Knee/adverse effects* ; Anesthesia, Spinal/adverse effects* ; Female ; Arthroplasty, Replacement, Hip/adverse effects* ; Morphine/adverse effects* ; Aged ; Middle Aged ; Risk Factors ; Postoperative Complications/epidemiology* ; Injections, Spinal ; Incidence ; Analgesics, Opioid/adverse effects* ; Aged, 80 and over

The orientation of the acetabular cup in hip joint anteroposterior radiograph is a key factor in evaluating the postoperative outcomes of total hip arthroplasty (THA). Currently, measurement of the acetabular cup anteversion angle primarily relies on manual drawing of auxiliary lines by orthopedic surgeons and calculations using scientific calculators. This study proposes an automated computer-aided measurement method for the acetabular cup anteversion angle based on hip joint anteroposterior radiograph. The proposed method segments hip prosthesis images using an improved Otsu algorithm, identifies feature points at the acetabular cup opening by combining circle-fitting theory and the cup's geometric characteristics, and fits an ellipse to the cup opening to calculate the anteversion angle. A total of 104 hip joint anteroposterior radiographs, including 71 right-sided and 81 left-sided prostheses, were analyzed. Two orthopedic surgeons independently measured the postoperative anteversion angles, and the results were compared with computer-generated measurements for correlation analysis. Spearman and Pearson correlation analyses demonstrated significant correlations between the proposed method and manual measurements for both the right group ( r = 0.795, P < 0.01) and the left group ( r = 0.859, P < 0.01). This method provides a reliable reference for orthopedic surgeons to assess postoperative prognosis.
Humans ; Acetabulum/anatomy & histology* ; Arthroplasty, Replacement, Hip/methods* ; Algorithms ; Hip Prosthesis ; Hip Joint/diagnostic imaging* ; Radiography ; Image Processing, Computer-Assisted/methods*

PURPOSE: Over 30,000 hip hemiarthroplasties for neck of femur fractures are performed annually in the United Kingdom (UK). The national recommendation is via the lateral approach, to reduce the risk of dislocation, with the potential expense of reduced function and mobility post-operatively. Muscle-sparing approaches, such as SPAIRE (sparing piriformis and internus repairing externus), have been invented to address the issue of dislocation. METHODS: We performed a retrospective data collection at a single center with a high annual volume of hip hemiarthroplasties over 12 months. All patients who had hip hemiarthroplasty as their primary treatment were included. Patients who passed away and were non-ambulant before their surgery were excluded from the study. Our primary outcome was the dislocation rate and secondary outcomes were the time to mobilization after surgery and the duration of surgery. Statistical analysis was performed using XLSTAT software. RESULTS: We identified 194 cases, and these were divided into 3 groups based on the surgical approach: SPAIRE (n = 43), lateral (n = 97), and posterior (n = 54). Groups had similar demographics and a minimum 3-month follow-up after surgery. There were no dislocations in the SPAIRE group, whereas the dislocation rate for the other 2 groups was 2.5% in the lateral and 9.1% in the posterior groups at 6 months post-surgery. There was an earlier return to mobility in the SPAIRE (1.4 day) compared to the 2 other groups ( 2 days and 2.6 days). Average surgical times were very similar among all 3 groups (74 min vs. 79 min vs. 71 min). CONCLUSION The SPAIRE approach seems to be safe and provides a low risk of dislocation and good post-operative function for patients undergoing hip hemiarthroplasties.
Humans ; Hemiarthroplasty/methods* ; Retrospective Studies ; Female ; Male ; Aged ; United Kingdom ; Femoral Neck Fractures/surgery* ; Middle Aged ; Treatment Outcome ; Aged, 80 and over ; Arthroplasty, Replacement, Hip/methods* ; Trauma Centers ; Hip Dislocation/prevention & control* ; Postoperative Complications/prevention & control*

OBJECTIVE: To analyze the short-term effectiveness and safety of personalized three-dimensional (3D) printed customized prostheses in severe Paprosky type Ⅲ acetabular bone defects. METHODS: A retrospective analysis was conducted on 8 patients with severe Paprosky type Ⅲ acetabular bone defects and met the selection criteria between January 2023 and June 2024. There were 3 males and 5 females, with an average age of 64.6 years ranged from 56 to 73 years. All primary replacement prostheses were non-cemented, including 1 ceramic-ceramic interface, 1 ceramic-polyethylene interface, and 6 metal-polyethylene interfaces. The time from the primary replacement to the revision was 4 days to 18 years. The reasons for revision were aseptic loosening in 5 cases, revision after exclusion in 2 cases, and repeated dislocation in 1 case. The preoperative Harris score was 39.5±3.7 and the visual analogue scale (VAS) score was 7.1±0.8. The operation time, intraoperative blood loss, hospital stay, and complications were recorded. The hip function was evaluated by Harris score, and the degree of pain was evaluated by VAS score. The acetabular cup abduction angle, anteversion angle, rotational center height, greater trochanter height, and femoral offset were measured on X-ray film. RESULTS: The operation time was 95-223 minutes, with an average of 151.13 minutes. The intraoperative blood loss was 600-3 500 mL, with an average of 1 250.00 mL. The hospital stay was 13-20 days, with an average of 16.88 days. All 8 patients were followed up 2-12 months, with an average of 6.4 months. One patient had poor wound healing after operation, which healed well after active symptomatic treatment. One patient had lower limb intermuscular vein thrombosis, but no thrombosis was found at last follow-up. No serious complications such as aseptic loosening, infection, dislocation, and periprosthetic fracture occurred during the follow-up. At last follow-up, the Harris score was 72.0±6.2 and the VAS score was 1.8±0.7, which were significantly different from those before operation ( t=-12.011, P<0.001; t=16.595, P<0.001). On the second day after operation, the acetabular cup abduction angle ranged from 40° to 49°, with an average of 44.18°, and the acetabular cup anteversion angle ranged from 19° to 26°, with an average of 21.36°, which were within the "Lewinneck safety zone". There was no significant difference in the rotational center height, greater trochanter height, and femoral offset between the healthy side and the affected side ( P>0.05). CONCLUSION The use of personalized 3D printed customized prostheses for the reconstruction of severe Paprosky type Ⅲ acetabular bone defects can alleviate pain and enhances hip joint function, and have good postoperative prosthesis position, without serious complications and have good safety.
Humans ; Printing, Three-Dimensional ; Male ; Female ; Middle Aged ; Acetabulum/surgery* ; Aged ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Arthroplasty, Replacement, Hip/instrumentation* ; Reoperation ; Treatment Outcome

OBJECTIVE: To explore the correlation between the Barthel index score and other factors with the preoperative occurrence of deep vein thrombosis (DVT) in patients undergoing total hip arthroplasty (THA) revision surgery. METHODS: A retrospective analysis was conducted on clinical data from 122 patients who met the inclusion criteria and underwent THA revision surgery between April 2017 and November 2020. Among them, 61 were male and 61 were female, with an age range of 32-85 years (mean, 65.3 years). The reasons for revision included prosthetic joint infection in 7 cases, periprosthetic fracture in 4 cases, prosthetic dislocation in 6 cases, and aseptic loosening in 105 cases. The Barthel index score was 76.4±17.7, with 10 cases classified as level 1, 57 as level 2, 37 as level 3, and 18 as level 4. Univariate analysis was performed on variables such as age, gender, body mass index, Barthel index score, preoperative D-dimer positivity, history of diabetes, hypertension, cancer, cerebral infarction, smoking, and thrombosis in patients with and without preoperative DVT. Furthermore, logistic regression was used to identify risk factors for preoperative DVT in THA revision surgery. The incidence of preoperative DVT was compared among different Barthel index score groups. RESULTS: Preoperative DVT was detected in 11 patients (9.02%), all of whom had intermuscular venous thrombosis. Among them, 1 had prosthetic joint infection, 1 had periprosthetic fracture, 1 had prosthetic dislocation, and 8 had aseptic loosening. Univariate analysis showed significant differences between the two groups in terms of age, gender, and Barthel index score ( P<0.05). logistic regression further revealed that female, age ≥70 years, and Barthel index score<60 were independent risk factors for preoperative DVT in patients undergoing THA revision surgery ( P<0.05). The incidence of preoperative DVT in patients with Barthel index scores of levels 1, 2, 3, and 4 were 0 case (0%), 2 cases (3.5%), 3 cases (8.1%), and 6 cases (33.3%), respectively. A significant correlation was found between Barthel index score classification and the incidence of preoperative DVT in patients undergoing THA revision surgery ( χ ²=10.843， P=0.001). CONCLUSION In patients undergoing THA revision surgery, older age, female, and lower Barthel index scores are associated with higher preoperative DVT incidence. For patients with low preoperative Barthel index scores, preoperative thrombosis screening should be emphasized.
Humans ; Arthroplasty, Replacement, Hip/adverse effects* ; Male ; Female ; Aged ; Middle Aged ; Retrospective Studies ; Reoperation ; Aged, 80 and over ; Venous Thrombosis/epidemiology* ; Adult ; Risk Factors ; Postoperative Complications/etiology* ; Preoperative Period

OBJECTIVE: To evaluate precise assessment methods for predicting the optimal acetabular cup size in total hip arthroplasty (THA). METHODS: A clinical data of 73 patients (80 hips) who underwent primary THA between December 2022 and July 2024 and met the inclusion criteria was analyzed. There were 39 males and 34 females with an average age of 66.3 years (range, 56-78 years). Among them, 66 cases were unilateral THA and 7 were bilateral THAs. There were 29 patients (34 hips) of osteoarthritis, 35 patients (35 hips) of femoral neck fractures, and 9 patients (11 hips) of osteonecrosis of the femoral head. Based on anteroposterior pelvic X-ray films, three methods were employed to predict acetabular cup size, including preoperative template planning, radiographic femoral head diameter (FHD) measurement, and intraoperative FHD measurement. The predicted acetabular cup sizes from these methods were compared with the actual implanted sizes. RESULTS: The predicted acetabular cup sizes using the preoperative template planning, radiographic FHD measurement, and intraoperative FHD measurement were (51.25±2.81), (49.72±3.11), and (49.90±2.74) mm, respectively, compared to the actual implanted cup size of (50.57±2.74) mm, with no significant difference ( P>0.05). Regarding agreement with the actual implanted cup size, the preoperative template planning achieved exact matches in 35 hips (43.75%), one-size deviation in 41 hips (51.25%), and two-size deviations in 4 hips (5%); the radiographic FHD measurement achieved exact matches in 12 hips (15%), one-size deviation in 57 hips (71.25%), and two-size deviations in 11 hips (13.75%); and the intraoperative FHD measurement achieved exact matches in 26 hips (32.5%), one-size deviation in 52 hips (65%), and two-size deviations in 2 hips (2.5%). There were significant differences in agreement distributions between the three methods and the actual implanted cup sizes ( H=18.579, P<0.001). CONCLUSION The intraoperative FHD measurement, as a simple, cost-effective, and accurate method, effectively guides acetabular cup selection, reduces the risk of prosthesis wear, enhances postoperative joint stability.
Humans ; Arthroplasty, Replacement, Hip/instrumentation* ; Male ; Female ; Middle Aged ; Acetabulum/diagnostic imaging* ; Aged ; Hip Prosthesis ; Prosthesis Design ; Femur Head/surgery* ; Osteoarthritis, Hip/surgery* ; Radiography ; Femoral Neck Fractures/surgery* ; Femur Head Necrosis/surgery*

OBJECTIVE: To introduce the etiology and prevention of bone cement implantation syndrome (BCIS). METHODS: The literature about BCIS at home and abroad in recent years was extensively reviewed, and the incidence, clinical manifestations, etiology, and prevention of BCIS were summarized and analyzed. RESULTS: The clinical manifestations of BCIS are diverse. The etiology of BCIS is not completely clarified, and it may be related to circulating methyl methacrylate-mediated model, embolus-mediated model, histamine release and hypersensitivity response, complement activation and multimodal model. BCIS prevention begins with the identification of high-risk patients in preoperative evaluation and communication between surgeon and anesthesiologist about the choice of implant type, surgical procedure, and technique to minimize the risk of cardiovascular complications in high-risk patients with multiple or severe risk factors or comorbidities. Preoperative assessment and optimization of a patient's cardiovascular reserve is also critical to prevent BCIS. CONCLUSION BCIS is a possible complication after hip joint arthroplasty, and its pathogenesis needs to be further research in order to provide new ideas for prevention and treatment.
Humans ; Bone Cements/adverse effects* ; Postoperative Complications/etiology* ; Arthroplasty, Replacement, Hip/adverse effects* ; Risk Factors ; Syndrome ; Methylmethacrylate/adverse effects*

OBJECTIVE: To investigate the analgesic effect of locally injecting a "cocktail" analgesia containing a high-dose compound betamethasone during revision hip arthroplasty, and also to study the usage of opioid drugs. METHODS: A retrospective analysis was conducted on the clinical data of 180 patients who underwent revision hip arthroplasty due to aseptic loosening of the hip prosthesis between January 2015 and December 2021. Among them, 95 patients received intraoperative injection of "cocktail" analgesia containing high-dose compound betamethasone (group A), and 85 patients received intraoperative injection of traditional "cocktail" analgesia (group B). There was no significant difference in baseline data such as gender, age, body mass index, presence or absence of diabetes mellitus between the two groups ( P>0.05). The hospital stay, use of opioid drugs within 72 hours, and the incidence of adverse reactions within 72 hours after operation [including nausea and vomiting, insomnia, deep venous thrombosis (DVT), infection, etc.] were recorded and compared between the two groups. The pain relief of patients was evaluated using the static and dynamic visual analogue scale (VAS) scores at 12, 24, 48, and 72 hours after operation. The incidence of complications (including prosthesis re-loosening, hip joint dislocation, hip joint stiffness, limping, chronic pain, etc.) at 2 years after operation was recorded, and the Harris Hip Score (HHS) was used to evaluate the function at 2 years after operation. RESULTS: In group A, the utilization rate of opioid drugs within 72 hours after operation was significantly lower than that in group B ( P<0.05). However, there was no significant difference between the two groups in terms of hospital stay, as well as the incidence of adverse reactions such as nausea and vomiting, insomnia, DVT, and infection within 72 hours after operation ( P>0.05). The VAS scores of both groups decreased with time, and the differences between different time points were significant ( P<0.05). The static and dynamic VAS scores of group A were significantly lower than those of group B at 12, 24, and 48 hours after operation ( P<0.05), but there was no significant difference in static and dynamic VAS scores between the two groups at 72 hours after operation ( P>0.05). All patients in both groups were followed up 2-8 years, with an average of 5.73 years. At 2 years after operation, no significant difference was found between the two groups in the incidence of complications and HHS score ( P>0.05). CONCLUSION "Cocktail" analgesia containing a high-dose compound betamethasone for early analgesia after revision hip arthroplasty can effectively reduce postoperative pain and the use of opioid drugs, but will not increase the incidence of infection and DVT after operation.
Humans ; Arthroplasty, Replacement, Hip/adverse effects* ; Betamethasone/therapeutic use* ; Retrospective Studies ; Male ; Female ; Analgesics, Opioid/administration & dosage* ; Pain, Postoperative/prevention & control* ; Middle Aged ; Reoperation ; Aged ; Analgesia/methods* ; Adult ; Pain Measurement ; Pain Management/methods* ; Prosthesis Failure ; Hip Prosthesis

OBJECTIVE: To review the research progress of intelligent remote follow-up modes in the application after hip and knee arthroplasty. METHODS: Extensive literature on this topic published in recent years both domestically and internationally was reviewed, and the application of intelligent remote follow-up modes after hip and knee arthroplasty was summarized and analyzed. RESULTS: The intelligent remote follow-up mode is a novel follow-up method based on network information technology. Patients who undergo hip and knee arthroplasty require long-term follow-up and rehabilitation guidance after operation. Traditional outpatient follow-up is relatively time-consuming and inconvenient for some patients in terms of travel and transportation, which makes the application of intelligent remote follow-up modes increasingly widespread worldwide. The inherent attributes of remote interaction and instant feedback of this mode make it particularly valued in the field of hip and knee arthroplasty. Artificial intelligence (AI)-based voice follow-up systems and virtual clinics have significant advantages in improving follow-up efficiency, reducing human resource costs, and enhancing patient satisfaction. CONCLUSION The existing intelligent follow-up system has formed a standardized protocol in remote follow-up and rehabilitation guidance. However, there are still shortcomings in the formulation of personalized rehabilitation plans and the gerontechnological adaptation of human-computer interaction. In the future, it is necessary to construct a multimodal data fusion platform and establish technical application guidelines for different rehabilitation stages.
Humans ; Arthroplasty, Replacement, Knee/rehabilitation* ; Arthroplasty, Replacement, Hip/rehabilitation* ; Artificial Intelligence ; Follow-Up Studies ; Telemedicine

OBJECTIVE: To explore the reliability and accuracy of the arbitrary point method for measuring the anteversion angle of acetabular prosthesis after total hip arthroplasty (THA) based on pelvic X-ray films. METHODS: The clinical data of 23 patients (25 hips) who underwent THA between December 2018 and September 2023 and met the selection criteria were retrospectively analyzed. Among them, there were 16 males and 7 females, with an average age of 57.6 years (range, 34-81 years); 13 hips had THA on the left side and 12 on the right side. There were 19 cases (21 hips) of osteonecrosis of the femoral head, 2 cases (2 hips) of femoral neck fractures, 1 case (1 hip) of developmental dysplasia of the hip, and 1 case (1 hip) of osteoarthritis. After THA, all patients underwent X-ray examination and CT scan. Three physicians measured the anteversion angle of acetabular prosthesis using the arbitrary point method and the CT measurement method respectively, and repeated the measurements three times. The results of the two measurement methods were compared, and the intraclass correlation coefficient (ICC) was employed to assess the reproducibility of the methods. RESULTS: The anteversion angles of acetabular prosthesis were (15.87±7.73)° measured by the arbitrary point method, and (15.31±7.89)° measured by CT measurement method. There was no significant difference between the two methods ( t=1.515, P=0.143). The ICC of the measurement results by the arbitrary point method for the three physicians were 0.97 ( P<0.001), 0.96 ( P<0.001), and 0.96 ( P<0.001), respectively; and the ICC of the measurement results by CT method were 0.93 ( P<0.001), 0.93 ( P<0.001), and 0.94 ( P<0.001), respectively. CONCLUSION The arbitrary point method for measuring the anteversion angle of acetabular prosthesis after THA based on pelvic X-ray film is easy to operate, accurate, and has high reproducibility.
Humans ; Arthroplasty, Replacement, Hip/methods* ; Male ; Female ; Aged ; Middle Aged ; Hip Prosthesis ; Acetabulum/surgery* ; Aged, 80 and over ; Retrospective Studies ; Adult ; Reproducibility of Results ; Feasibility Studies ; Tomography, X-Ray Computed