OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

A 91-year-old male patient was admitted with a history of mitral valve prolapse diagnosed by physical examination ten years prior and recent onset of exertional chest discomfort persisting for over one month. Transthoracic echocardiography showed that the anterior leaflet of mitral valve was thickened and prolapsed with severe regurgitation, and transesophageal echocardiography further confirmed that the anterior and posterior leaflets of mitral valve were prolapsed with massive regurgitation (A1, A2, A3, P1 and P2 were all prolapsed). Thus, the diagnosis of Barlow syndrome was considered. Transcatheter edge-to-edge mitral repair was performed with two MitraClip^TM G4 XTWs. After a 10 months follow-up, the patient's cardiac function was significantly improved, and the degree of mitral regurgitation was mild.
Humans ; Male ; Aged, 80 and over ; Mitral Valve Insufficiency/surgery* ; Mitral Valve Prolapse/diagnostic imaging* ; Cardiac Catheterization/methods* ; Mitral Valve/surgery* ; Heart Valve Prosthesis Implantation/methods*

OBJECTIVES: To evaluate the short-term clinical efficacy of transcatheter edge-to-edge repair (TEER) in patients with moderate to severe mitral regurgitation. METHODS: Clinical data of patients with moderate to severe mitral regurgitation who underwent TEER in the Department of Cardiology, the First Affiliated Hospital of Xi'an Jiaotong University from April 2021 to May 2024, were retrospectively analyzed, including preoperative baseline clinical and echocardiography data, intraoperative data and 6-month postoperative follow-up data. RESULTS: A total of 67 patients' (47 males and 20 females) data were included, of whom 62 completed 6-month follow-up. The immediately postoperative success rate was 88.1% (59/67), and 83.9% (52/62) patients exhibited mitral regurgitation ≤2+ at 6 months postoperatively, showing significant improvement compared with preoperative (P<0.05). The proportion of patients with mitral regurgitation ≤2+ at 6 months was significantly higher in the degenerative mitral regurgitation (DMR) group than that in the functional mitral regurgitation (FMR) group (P<0.05). The mean mitral valve gradient (MVG) in DMR group was increased from (3.1±1.2) mmHg (1 mmHg=0.133 kPa) to (3.7±1.2) mmHg 6 months after operation (P<0.05), while there was no significant change in FMR group (P>0.05). Compared with those before operation, the N-terminal pro-B-type natriuretic peptide levels in both FMR and DMR groups were significantly lower at 6 months postoperatively (all P<0.05), and the left atrial volume index and left atrial anteroposterior diameter were also significantly lower (all P<0.05). The left ventricular end-diastolic diameter and left ventricular end-systolic diameter were significantly reduced 6 months after operation in the FMR group (all P<0.05), but no significant changes were observed in the DMR group (all P>0.05). The ejection fraction was not significantly changed before and after operation in both groups (all P>0.05). The mitral regurgitation, tricuspid regurgitant, and pulmonary artery pressure were significantly reduced in both groups at 6 months postoperatively (all P<0.05). CONCLUSIONS TEER is effective for moderate to severe mitral regurgitation. The improve-ments in left ventricular remodeling are more pronounced in patients with FMR while the degree of mitral regurgitation is more significant in DMR patients. However, MVG elevation is more common during the follow-up.
Humans ; Mitral Valve Insufficiency/surgery* ; Male ; Female ; Retrospective Studies ; Middle Aged ; Aged ; Treatment Outcome ; Mitral Valve/surgery* ; Cardiac Catheterization/methods* ; Heart Valve Prosthesis Implantation/methods* ; Adult ; Follow-Up Studies

OBJECTIVES: To analyze the efficacy and safety of concomitant left atrial appendage clipping during heart valve surgery for valvular heart disease patients with atrial fibrillation. METHODS: Fifty-eight patients who underwent concomitant left atrial appendage clipping during cardiac valve surgery in the Second Affiliated Hospital of Nanchang University from January 2017 to June 2023 were included in the analysis, including 1 case who underwent aortic valve replacement, 49 cases who underwent mitral valve replace-ment (or valvuloplasty)+tricuspid valvuloplasty, and 8 cases who underwent double valve replacement+tricuspid valvuloplasty (3 cases combined with coronary artery bypass grafting). The patients were followed up for 3-36 months [(16.69±6.61) months] after operation, and the changes of cardiac function and the occurrence of serious adverse complications were evaluated. RESULTS: The cardiopulmonary bypass time ranged from 75 to 145 min [(102.50±21.03) min], and the aortic cross-clamp time ranged from 35 to 80 min [(58.02±14.63) min]. The length of postoperative intensive care unit stay was 1 to 5 days [(2.47±0.82) d], and the length of postoperative hospital stay was 7 to 22 days [(10.84±2.69) d]. Cardiac ultrasound indicated complete closure of the left atrial appendage in all cases. During the follow-up, New York Heart Association (NYHA) functional classifications were improved in 54 patients. No left atrial appendage-related bleeding events or other perioperative complications were observed; and no cerebral infarction, limb embolism events, or mortality cases occurred during the follow-up. CONCLUSIONS For valvular heart disease patients with atrial fibrillation, concomitant left atrial appendage clipping during cardiac valve surgery demonstrates efficacy and safety, with no severe adverse events during a medium-term follow-up.
Humans ; Atrial Appendage/surgery* ; Atrial Fibrillation/complications* ; Male ; Female ; Heart Valve Diseases/complications* ; Aged ; Middle Aged ; Heart Valve Prosthesis Implantation/methods* ; Treatment Outcome ; Cardiac Surgical Procedures/methods* ; Mitral Valve/surgery*

OBJECTIVES: To compare the efficacy of transcatheter tricuspid valve replacement (TTVR) using Lux-Valve and Lux-Valve Plus in patients with severe tricuspid regurgitation. METHODS: A total of 28 consecutive patients with severe tricuspid regurgitation who underwent TTVR with Lux-Valve (n=14) or Lux-Valve Plus (n=14) in the First Affiliated Hospital of the Air Force Medical University from August 2019 to November 2023 were enrolled. Transthoracic echocardiography was performed in all patients before and 6 months after the TTVR. The ultrasound indexes were compared before and 6 months after the TTVR in all patients and between Lux-Valve and Lux-Valve Plus groups. RESULTS: Compared with the Lux-Valve group, the Lux-Valve Plus group showed significantly reduced intraoperative bleeding and shorter postoperative hospital stays (both P<0.05). Six months after the TTVR, none of the patients exhibited more than a mild tricuspid valve regurgitation, and none of the patients had moderate or above perivalvular leakage except for one patient in the Lux-Valve Plus group who had a separation of the clamping member from the anterior tricuspid leaflet. The incidence of perivalvular leakage was significantly lower in the Lux-Valve Plus group (14.29%, 2/14) than in the Lux-Valve group (64.29%, 9/14, P<0.05). At 6 months after operation, the right chamber volume and right ventricle middle transverse diameter were reduced (both P<0.05); the peak blood flow velocity across the tricuspid valve, peak pressure gradient across the tricuspid valve, mean blood flow velocity of tricuspid valve, mean pressure gradient across the tricuspid valve and velocity time integral were increased in both groups (all P<0.05).Compared with the Lux-Valve group, the Lux-Valve Plus group showed higher left ventricular ejection fraction at 6 months postoperatively (P<0.05), while the rest of the indicators were not statistically different (all P>0.05). CONCLUSIONS The efficacy of using Lux-Valve and Lux-Valve Plus for TTVR in patients with severe tricuspid regurgitation is comparable. Six months after the TTVR, the right side of the heart has undergone reverse remodeling.While Lux-Valve Plus offers greater minimally invasive benefits, valve selection should consider device-specific characteristics and differences in individual patients.
Humans ; Tricuspid Valve Insufficiency/surgery* ; Male ; Female ; Heart Valve Prosthesis Implantation/methods* ; Middle Aged ; Aged ; Tricuspid Valve/surgery* ; Heart Valve Prosthesis ; Treatment Outcome ; Echocardiography ; Adult ; Cardiac Catheterization/methods*

OBJECTIVES: To evaluate the short-term outcomes of transcatheter pulmonary valve replacement (TPVR) using the Venus-P valve in patients with moderate-to-severe pulmonary regurgitation and right ventricular systolic dysfunction (RVSD) following surgical repair of complex congenital heart disease. METHODS: A retrospective analysis was conducted on patients undergoing Venus-P valve implantation (TPVR group, n=28) or surgical pulmonary valve replacement (SPVR group, n=19) at Fuwai Hospital between February 2014 and February 2024. All patients had moderate-to-severe pulmonary regurgitation with right ventricular ejection fraction less than 45% preoperatively. Postoperative pulmonary valve function and ventricular parameters were assessed at discharge and during a 6-month follow-up. RESULTS: All procedures were successfully completed with no early mortality. At 6 months, the TPVR group demonstrated significantly lower pulmonary valve transvalvular pressure gradients compared to the SPVR group (P<0.05). Both groups exhibited significant improvements from baseline in New York Heart Association (NYHA) functional class, biventricular ejection fractions, and right ventricular end-diastolic volume index (all P<0.05). The reduction in right ventricular end-diastolic diameter differed between the two groups (P<0.01). However, multivariable analysis revealed no association between this difference and surgical approach (β=4.4, P>0.05). In the TPVR group, QRS duration was significantly shortened postoperatively (P<0.01), with improvements in left ventricular end-diastolic volume index and cardiac index (both P<0.01), but these improvements did not differ significantly from the SPVR group (all P>0.05). During the follow-up, one patient in each group developed infective endocarditis within 1-month post-procedure; both were successfully treated with antibiotics. No other major complications were observed. CONCLUSIONS For patients with moderate-to-severe pulmonary regurgitation and RVSD, TPVR using the Venus-P valve effectively improves short-term pulmonary valve function and ventricular performance with a favorable safety profile, demonstrating potential as a minimally invasive alternative to SPVR .
Humans ; Pulmonary Valve Insufficiency/surgery* ; Retrospective Studies ; Pulmonary Valve/surgery* ; Heart Valve Prosthesis Implantation/methods* ; Ventricular Dysfunction, Right/physiopathology* ; Treatment Outcome ; Female ; Male ; Child ; Adult ; Heart Valve Prosthesis ; Adolescent ; Cardiac Catheterization/methods* ; Child, Preschool

OBJECTIVES: To evaluate the one-year outcomes of valve-in-valve transcatheter mitral valve replacement (ViV-TMVR) using SAPIEN 3 valve for treating mitral bioprosthetic valve failure. METHODS: A retrospective analysis was conducted on 26 patients with mitral bioprosthetic valve failure who underwent ViV-TMVR at West China Hospital, Sichuan University, between November 2022 and July 2024. The age of patients was 71.5 (64.5, 74.5) years, and 69.2% were female. Bioprosthetic valve failure occurred at (9.7±3.7) years after initial surgical implantation, with the most common failure mode being mixed stenosis and regurgitation (53.8%). The SAPIEN 3 valve was implanted via either a transseptal or transapical approach. Echocardiography was performed preoperatively, immediately post-procedure, and at 1 month, 6 months, and 1 year post-procedure. Outcomes included all-cause mortality, New York Heart Association (NYHA) functional class, Kansas City Cardiomyopathy Questionnaire (KCCQ)-12 score, and postoperative complications. RESULTS: The procedure was performed via the transseptal approach in 21 patients (80.8%) and the transapical approach in 5 patients (19.2%). All procedures were technically successful. No paravalvular leakage was observed immediately post-procedure, and mitral valve hemodynamics improved significantly. At the 1-year follow-up, 2 patients had died. Two patients (8.3% of survivors) were of NYHA functional class Ⅲ, and KCCQ-12 score improved to (88.4±14.6) points (both P<0.01). Echocardio-graphy at 1 year postoperatively showed significant reductions in peak mitral valve velocity [to (2.29±0.32) m/s] and mean transvalvular pressure gradient [to (9.5±3.5) mmHg, 1 mmHg=0.133 kPa] compared to baseline (both P<0.05). No moderate or severe mitral regurgitation or paravalvular leakage was observed. The proportion of patients with moderate-to-severe pulmonary hypertension decreased from 65.4% preoperatively to 13.0% at 1 year (P<0.05). CONCLUSIONS ViV-TMVR with the SAPIEN 3 valve for mitral biopro-sthetic valve failure is associated with high procedural success, significantly improved valve hemodynamics of the mitral value, alleviation of pulmonary hypertension, enhanced quality of life, and a low rate of complications at 1 year after the operation.
Humans ; Female ; Male ; Retrospective Studies ; Aged ; Bioprosthesis ; Heart Valve Prosthesis ; Mitral Valve/surgery* ; Heart Valve Prosthesis Implantation/methods* ; Middle Aged ; Prosthesis Failure ; Treatment Outcome ; Mitral Valve Insufficiency/surgery*

OBJECTIVE: To compare the influence of different emergence profile of implants in mandibular molar on the peri-implant soft tissue. METHODS: Forty-four implants were divided into two equal groups by mucosal thickness, ≥2 mm (group A) or < 2 mm (group B), and were randomly included in the test group and the control group. In the control group, the patients were treated by a prosthesis with no transmucosal modifications (subgroups A1 and B1). In groups A1 and B1, the prostheses maintained the original emergence profile of the healing abutment. In the test group, the prostheses were designed based on a width-to-height ratio (W/H) of 1.3 ∶ 1 (subgroups A2 and B2). In group A2, the buccal transmucosal configuration design was slightly concave, and in group B2, the prostheses were designed with convex buccal transmucosal configuration. Assessments were made before delivery of the definitive restoration (T0), one month (T1) and 12 months (T2) after loading. The soft tissue and prosthesis information were obtained by intraoral scan and were converted to digital models. The digital models of different time were superimposed together. Buccal mucosal W/H, emergence angle (EA) and buccal mucosal margin recession (ΔGM) were measured. RESULTS: One year after loading, the buccal mucosal margin recession in the test group (groups A2 and B2) was significantly lower than that in the control group (groups A1 and B1). The ΔGM in group A2 was significantly lower than that in group A1 (P=0.033), but in groups B1 and B2, it was not significantly different. The W/H in group A2 increased significantly one month after loading, but remained stable at one year. In the A1 group, the W/H changed little from initial to one month, but increased significantly at one year after loading. The W/H in group B2 remained stable from the beginning to one year, while in group B1, it changed little one month after loading, but increased significantly by one year. CONCLUSION When the initial mucosal thickness was ≥2 mm, the slightly concave prosthesis designed based on the biological W/H significantly maintained the level of buccal mucosa. When the mucosal thickness was < 2 mm, the slightly convex prosthesis design maintained a more stable W/H over one year.
Humans ; Mandible/surgery* ; Molar/surgery* ; Male ; Female ; Adult ; Middle Aged ; Dental Prosthesis Design ; Dental Implants ; Dental Implantation, Endosseous/methods*

In recent years, the field of heart valve interventional treatment has developed rapidly, and various new technologies have been continuously applied. The study provides a comprehensive review and analysis of the research progress and challenges related to interventional treatment products for the aortic valve, pulmonary valve, mitral valve, and tricuspid valve both domestically and internationally. The study also summarizes the status of heart valve interventional devices entering Special Review of Innovative Medical Device of National Medical Products Administration (NMPA). The results show that the field of valve interventional treatment is developing rapidly, but there is still room for improvement in terms of valve durability, operational suitability, and complication reduction. Lastly, the study looks forward to the future development trend of new technologies for heart valve interventional therapy, and puts forward suggestions for the promotion and application of new technologies of valve interventional therapy from the perspective of supervision.
Humans ; Heart Valve Prosthesis ; Heart Valves/surgery* ; Heart Valve Diseases ; Heart Valve Prosthesis Implantation/instrumentation*

Humans ; Transcatheter Aortic Valve Replacement ; Aortic Valve/surgery* ; Heart Valve Prosthesis Implantation ; Renal Dialysis ; Aortic Valve Stenosis/surgery* ; Treatment Outcome ; Heart Valve Prosthesis