OBJECTIVE: To investigate the effectiveness of 5G remote robotic surgery in the treatment of pelvic fractures. METHODS: A retrospective analysis was conducted on the clinical data of 160 patients with pelvic fractures admitted between July 2023 and June 2024 who met the selection criteria. Among these patients, 80 underwent internal fixation surgery with the assistance of 5G remote robotic surgery (5G group), while 80 received local robotic surgical assistance (control group). Baseline characteristics, including gender, age, body mass index, disease duration, cause of injury, and fracture classification, were compared between the two groups, and no significant difference was found ( P>0.05). The incision length, operation time, intraoperative blood loss, hospital stay, accuracy of screw placement, maximum residual displacement postoperatively, quality of fracture reduction, incidence of complications, Majeed pelvic function score and classification at last follow-up were recorded and compared between the two groups. RESULTS: In the 5G group, 180 screws were implanted during surgery, while 213 screws were implanted in the control group. The 5G group demonstrated significantly reduced intraoperative blood loss and shorter incision length compared to the control group ( P<0.05). No significant difference was observed between the two groups in terms of operation time or hospital stay ( P>0.05). Radiographic evaluation revealed excellent and good reduction rates of 98.8% (79/80) in the 5G group and 97.5% (78/80) in the control group, while excellent and good screw placement accuracy rates were 98.3% (177/180) in the 5G group and 95.8% (204/213) in the control group. No significant difference was found between the two groups in maximum residual displacement, reduction quality, or screw placement accuracy ( P>0.05). All patients were followed up 7-16 months (mean, 11.3 months), with no significant difference in follow-up duration between the groups ( P>0.05). No perioperative or follow-up complication, such as wound infection, iatrogenic fractures, iatrogenic neurovascular injury, screw loosening or breakage, or nonunion, were observed in either group. The control group exhibited a worse degree of gait alteration compared to the 5G group ( P<0.05), while no significant difference was found in incidences of squatting limitation or persistent pain ( P>0.05). At last follow-up, no significant difference was observed between the groups in Majeed pelvic function scores or grading ( P>0.05). CONCLUSION Compared with the local surgery group, 5G remote robotic surgery supported by remote expert technical guidance demonstrated smaller incision lengths, less intraoperative blood loss, and fewer postoperative complications, and was shown to be a precise, minimally invasive, safe, and reliable surgical method.
Humans ; Robotic Surgical Procedures/instrumentation* ; Pelvic Bones/surgery* ; Male ; Retrospective Studies ; Fracture Fixation, Internal/instrumentation* ; Female ; Fractures, Bone/surgery* ; Middle Aged ; Bone Screws ; Adult ; Operative Time ; Treatment Outcome ; Blood Loss, Surgical ; Length of Stay ; Postoperative Complications/epidemiology* ; Aged ; Young Adult

OBJECTIVE: To review the clinical characteristics of patients with traumatic spinopelvic dissociation (SPD) and explore the diagnostic and therapeutic methods. METHODS: A clinical data of 22 patients with SPD who underwent surgical treatment between March 2019 and August 2024 was retrospectively analyzed. There were 13 males and 9 females, with an average age of 35.5 years (range, 14-61 years). The causes of injury included falling from height in 16 cases, traffic accidents in 5 cases, and compression injury in 1 case. Sacral fractures were classified based on morphology into "U" type (9 cases), "H" type (7 cases), "T" type (4 cases), and "λ" type (2 cases). According to the Roy-Camille classification, there were 4 cases of type Ⅰ, 12 cases of type Ⅱ, 2 cases of type Ⅲ, and 4 cases of type Ⅳ. The Cobb angle was (35.7± 22.0)°. Sixteen patients were accompanied by lumbosacral trunk and cauda equina nerve injury, which was classified as grade Ⅱ in 5 cases, grade Ⅲ in 5 cases, and grade Ⅳ in 6 cases according to the Gibbons grading. The time from injury to operation was 2-17 days (mean, 5.7 days). Based on the type of sacral fracture and sacral nerve injury, 6 cases were treated with closed reduction and minimally invasive percutaneous sacroiliac screw fixation, 16 cases were treated with open reduction and lumbar iliac fixation (8 cases)/triangular fixation (8 cases). Among them, 11 patients with severe fracture displacement and kyphotic deformity leading to sacral canal stenosis or bony impingement within the sacral foramen underwent laminectomy and sacral nerve decompression. X-ray films and CT were reviewed during followed-up. The Matta score was used to evaluate the quality of fracture reduction. At last follow-up, the Majeed score was used to assess the functional recovery, and the Gibbons grading was used to evaluate the nerve function. RESULTS: All operations were successfully completed. All patients were followed up 8-64 months (mean, 20.4 months). Two patients developed deep vein thrombosis of the lower limbs, 2 had incision infections, and 1 developed a sacral pressure ulcer; no other complications occurred. Radiological examination showed that the Cobb angle was (12.0±6.8)°, which was significantly different from the preoperative one ( t=6.000, P<0.001). The Cobb angle in 16 patients who underwent open reduction was (14.9±5.5)°, which was significantly different from the preoperative one [(46.8±13.9)° ] ( t=8.684, P<0.001). According to the Matta scoring criteria, the quality of fracture reduction was rated as excellent in 8 cases, good in 7 cases, fair in 5 cases, and poor in 2 cases, with an excellent and good rate of 68.2%. Bone callus formation was observed at the fracture site in all patients at 12 weeks after operation, and bony union achieved in all cases at last follow-up, with a healing time ranging from 12 to 36 weeks (mean, 17.6 weeks). At last follow-up, the Majeed score was rated as excellent in 7 cases, good in 10 cases, fair in 4 cases, and poor in 1 case, with an excellent and good rate of 77.3%. One patient experienced a unilateral iliac screw breakage at 12 months after operation, but the fracture had already healed, and there was no loss of reduction. Among the 16 patients with preoperative sacral nerve injury, 11 cases showed improvement in nerve function (6 cases) or recovery (5 cases). CONCLUSION SPD with low incidence, multiple associated injuries, and high incidence of sacral nerve injury, requires timely decompression of the sacral canal for symptomatic sacral nerve compression, fractures reduction, deformities correction, and stable fixation.
Humans ; Adult ; Female ; Male ; Retrospective Studies ; Middle Aged ; Spinal Fractures/diagnostic imaging* ; Adolescent ; Sacrum/diagnostic imaging* ; Fracture Fixation, Internal/methods* ; Young Adult ; Pelvic Bones/surgery* ; Treatment Outcome ; Bone Screws

OBJECTIVE: To define a safe distance range from the LC-Ⅱ screw trajectory to the apex of the greater sciatic notch based on pelvic CT measurements, and to clinically assess the feasibility of using this range under iliac oblique view combined with iliac tangential view fluoroscopy to guide screw insertion. METHODS: CT scans of 104 normal pelvises collected between January 2022 and February 2025 were analyzed. There were 52 males and 52 females, with a median age of 45.8 years (range, 19-76 years). The RadiAnt DICOM Viewer software was used to reconstruct coronal, sagittal, and axial sections of the potential LC-Ⅱ screw trajectory. The maximum safety distance (Dmax) and the optimal safety distance (Dopt) from this trajectory to the greater sciatic notch were measured on the coronal and sagittal views. A retrospective analysis was conducted on 21 patients with LC-Ⅱ type pelvic fractures treated with the LC-Ⅱ screws fixation. And the screws were placed within the pre-defined safe distance under guidance from the iliac oblique view and iliac tangential view. Postoperative CT scans were obtained to evaluate the accuracy of screw placement. RESULTS: Radiographic measurements from the 104 cases showed that Dmax ranged from 1.87 to 3.87 cm (mean, 2.79 cm), and Dopt ranged from 1.01 to 2.92 cm (mean, 1.84 cm). Both Dmax and Dopt were significantly greater in the males than in the females ( P>0.05). No significant difference was found between the left and right sides within the same gender ( P>0.05). All 21 patients successfully underwent fracture reduction and fixation, with a total of 23 LC-Ⅱscrews implanted. According to the Lonstein grading system, the screw placement accuracy was rated as excellent in 16 screws, good in 3, fair in 3, and poor in 1, with an excellent and good rate of 82.6%. CONCLUSION Utilizing a CT-defined safe distance range from the screw trajectory to the greater sciatic notch, and adhering to this range under iliac oblique view combined with iliac tangential view fluoroscopy, enables the accurate and precise placement of LC-Ⅱ screws.
Humans ; Male ; Female ; Middle Aged ; Bone Screws ; Adult ; Tomography, X-Ray Computed/methods* ; Aged ; Ilium/surgery* ; Pelvic Bones/diagnostic imaging* ; Fracture Fixation, Internal/instrumentation* ; Retrospective Studies ; Fluoroscopy ; Fractures, Bone/diagnostic imaging* ; Young Adult

OBJECTIVE: To investigate the effectiveness of three-dimensional (3D) printed customized hemi-pelvic prosthesis for pelvic reconstruction after resection of massive pelvic tumors. METHODS: A retrospective analysis was conducted on 26 patients with massive pelvic tumors who met the selection criteria and were treated between November 2021 and May 2024. The cohort included 11 males and 15 females, with a mean age of 52.65 years (range, 17-73 years). Histopathological diagnoses were as follows: 9 cases of chondrosarcoma, 2 of undifferentiated pleomorphic sarcoma, 4 of spindle cell sarcoma, 2 of osteosarcoma, 1 of solitary fibrous tumor, 1 of myxoid chondroma, 1 of malignant peripheral nerve sheath tumor, 1 of chondromyxoid epithelioma, and 5 of metastatic malignant tumors. According to the Enneking classification, tumor involvement was distributed as 4 cases in zones Ⅰ+Ⅱ, 9 in zones Ⅱ+Ⅲ, 3 in zones Ⅰ+Ⅳ, 8 in zones Ⅰ+Ⅱ+Ⅲ, and 2 in zones Ⅰ+Ⅱ+Ⅳ. The disease duration ranged from 3 to 40 months, with a mean of 9.85 months. All patients underwent reconstruction with customized 3D-printed hemi-pelvic prostheses. The effectiveness was evaluated by Musculoskeletal Tumor Society (MSTS) score and Harris hip score before operation and at last follow-up, and pain levels were evaluated by visual analogue scale (VAS) score before operation, at 3 months after operation, and at last follow-up. RESULTS: The operation time ranged from 186 to 528 minutes, with a mean of 334.58 minutes. The intraoperative blood loss ranged from 1 400 to 4 000 mL, with a mean of 2173.08 mL, and the transfusion volume ranged from 750 to 3 500 mL, with a mean of 1 659.62 mL. All 26 patients were followed up 10-42 months (mean, 18.5 months). Postoperative complications included prosthetic dislocation in 2 cases, which were attributed to improper positioning during home care and an accidental fall, respectively. One patient developed a vesicocutaneous fistula and poor wound healing due to pre-existing tumor invasion into the bladder. One patient experienced failure and loosening of the internal fixation at 8 months after operation caused by local tumor recurrence, and subsequently died at 14 months postoperatively due to progression of brain metastases. Postoperative complications such as poor healing of incisions, prosthetic dislocation, or failure of internal fixation was not observed in the remaining patients. At last follow-up, the walking ability of most patients recovered to varying degrees. The VAS scores at 3 months and at last follow-up significantly improved when compared with those before operation, and the scores at last follow-up further improved when compared with 3 months after operation, all showing significant differences ( P<0.05). The MSTS scores and Harris scores at last follow-up were significantly higher than those before operation ( P<0.05). CONCLUSION 3D printed customized hemi-pelvic prosthesis is effective for reconstruction of massive pelvic tumors after resection, but there are still some limitations, and soft tissue reconstruction should be paid attention to.
Humans ; Printing, Three-Dimensional ; Female ; Male ; Adult ; Plastic Surgery Procedures/methods* ; Retrospective Studies ; Middle Aged ; Aged ; Pelvic Bones/surgery* ; Bone Neoplasms/surgery* ; Adolescent ; Pelvic Neoplasms/surgery* ; Prosthesis Design ; Young Adult ; Treatment Outcome ; Prostheses and Implants

OBJECTIVE: To investigate the effectiveness of TiRobot-assisted minimally invasive treatment for fragility fractures of the pelvis (FFP) in elderly patients. METHODS: A retrospective analysis was conducted on the clinical data of 176 patients with FFP who were admitted between July 2018 and July 2024 and met the selection criteria. Among them, 95 patients underwent TiRobot-assisted closed reduction and minimally invasive cannulated screw fixation (robot group), while 81 patients underwent traditional open reduction and plate screw fixation (control group). There was no significant difference in baseline data such as gender, age, fracture classification, disease duration, and preoperative visual analogue scale (VAS) pain scores between the two groups ( P>0.05). The following parameters were recorded and compared between the two groups, including operation time, intraoperative blood loss, intraoperative transfusion rate, volume of intraoperative blood transfusion, maximum incision length, hospital stay, maximum residual displacement, reduction quality, fracture healing time, incidence of complications, VAS scores, Majeed pelvic function scores, and functional grading. RESULTS: All surgeries in both groups successfully completed. The robot group exhibited significantly shorter operation time, reduced intraoperative blood loss, lower intraoperative transfusion rate, smaller volume of intraoperative blood transfusion, shorter maximum incision length, and shorter hospital stay compared to the control group ( P<0.05). In the robot group, a total of 14 INFIX internal fixation frames and 280 cannulated screws were implanted, among which 250 screws were rated as excellent, 17 as good, and 13 as poor, resulting in a screw placement excellent and good rate of 95.36%. Radiological review revealed that the excellent and good rate of reduction quality was in 91.58% (87/95) in the robot group and 81.48% (66/81) in the control group, with no significant difference in postoperative maximum residual fracture displacement or reduction quality between the two groups (P>0.05). All patients in both groups were followed up 12-66 months, with an average of 28.9 months, and there was no significant difference in follow-up time between the two groups ( P>0.05). The fracture healing time in the robot group was significantly shorter than that in the control group ( P<0.05). At last follow-up, both groups showed significant improvement in VAS scores compared to preoperative values ( P<0.05); the change values of VAS scores, Majeed scores, and the excellent and good rate of Majeed pelvic function were significantly higher in the robot group than in the control group ( P<0.05). Regarding postoperative complications, there was no significant difference between the two groups in terms of gait changes, secondary surgeries, heterotopic ossification, incision infections, walking difficulties, internal fixation failure, or mortality rates ( P>0.05); however, the incidence of delayed wound healing was significantly lower in the robot group than in the control group ( P<0.05). CONCLUSION TiRobot-assisted minimally invasive treatment of elderly FFP is superior to traditional open reduction and internal fixation in terms of surgical trauma control, postoperative rehabilitation speed, and functional recovery.
Humans ; Male ; Retrospective Studies ; Female ; Minimally Invasive Surgical Procedures/instrumentation* ; Fracture Fixation, Internal/instrumentation* ; Pelvic Bones/surgery* ; Aged ; Bone Screws ; Bone Plates ; Robotic Surgical Procedures/methods* ; Aged, 80 and over ; Treatment Outcome ; Osteoporotic Fractures/surgery* ; Operative Time ; Blood Loss, Surgical ; Fracture Healing ; Fractures, Bone/surgery*

OBJECTIVE: To establish digital model of Ideberg typeⅡregional glenoid fracture anatomical plate with 3D metal printing technology. METHODS: The scapular imaging data of a 34-year-old healthy male volunteer were retrospectively selected. Mimics 15.01, NX 12.0 and other software were used to design Ideberg typeⅡ regional scapular fracture guide plate system. STL data were input into a metal 3D printer to print 1∶1 scapular model and anatomical plate of scapular pelvis with guide sleeve. The fit of the plate was tested in vitro and the accuracy of the screw position was evaluated by imaging. The printing time of scapular model, design of the nail path and making time of the anatomic guided plate were recorded. RESULTS: 3D metal-printed Ideberg typeⅡ guide plate for scapular fracture fitted well to 3D printed scapular model, the locking screw was oriented accurately, and X-ray and CT showed good screw position. The printing time of scapula model, time of nail path design and special-shaped anatomical guide plate production were 52.0, 15.0 and 320 min, respectively. CONCLUSION Anatomical plates based on 3D metal printing technology could achieve good adhesion of Ideberg typeⅡ regional fractures and precise screw placement, providing a new and accurate surgical method for the treatment of Ideberg typeⅡ glenoid fractures.
Humans ; Printing, Three-Dimensional ; Male ; Adult ; Bone Plates ; Fractures, Bone/diagnostic imaging* ; Fracture Fixation, Internal/methods* ; Pelvic Bones/surgery* ; Metals ; Scapula/surgery* ; Models, Anatomic

PURPOSE: Lateral compression (LC) injuries account for more than two-thirds of all pelvic fractures. The goal of surgical treatment is to provide adequate stability and early mobilization. The consensus on posterior fixation of such injuries is strong in the literature; however, the necessity of anterior ring fixation is not clear. Therefore, this study was formulated to determine the practicability of posterior-only fixation in LC injuries. METHODS: Between March 2015 and May 2020, all patients with LC type pelvic ring fractures who were admitted and operated upon in a single level 1 trauma center were included in this cross-sectional observational study. Demographic data, co-morbidities, treatment, types of surgical fixation, concomitant injuries and surgeries, surgical complications, length of hospital stay, injury to weight bearing duration, and follow-up period were documented. Functional outcome and quality of life were assessed using Majeed score and SF-36 questionnaire. Non-normally distributed data were presented as median (Q₁, Q₃) and normally distributed data were presented as mean ± standard deviation (SD). Spearman's rank correlation coefficient was used for correlation analysis. RESULTS: A total of 25 patients were included, with a mean age of 29.8 years. All patients were managed operatively with posterior-only fixation. The median Majeed score was 90 (76, 95). The median physical component summary score was 69.37 (38.75, 85.62). The median mental component summary score was 63.95 (39.25, 87.87). There was no significant difference compared to population norms of both physical component summary and mental component summary. Injury to weight bearing time correlated significantly (p = 0.002) with Majeed score as well as SF-36 score (p = 0.044). No other variable had a significant association with outcomes. CONCLUSION Posterior-only fixation is sufficient for fixing LC injuries with up to 80% of cases having good to excellent functional outcomes. However, comparative studies with larger sample sizes are needed for further validation.
Humans ; Male ; Female ; Adult ; Cross-Sectional Studies ; Pelvic Bones/surgery* ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods* ; Middle Aged ; Young Adult ; Quality of Life ; Adolescent ; Length of Stay

PURPOSE: The fixation method commonly employed worldwide for treating unstable fractures of the posterior pelvic ring is the percutaneous iliosacral screw technique. However, prolonged operation time and frequent fluoroscopies result in surgical risks. This study aimed to investigate whether a new triangulation method could reduce operative and fluoroscopy times and increase the accuracy of screw placement. METHODS: This study is a real-world retrospective cohort analysis that examined a patient cohort who underwent percutaneous iliosacral screw fixation between January 1, 2019 and December 31, 2022. Inclusion criteria were patients (1) diagnosed with posterior pelvic ring instability who underwent pelvic fracture closed reduction and percutaneous S1 transverse-penetrating iliosacral screw placement and (2) aged >18 years. Exclusion criteria were: (1) combined proximal femoral fractures, (2) severe soft tissue injury in the surgical area, (3) incomplete imaging data, and (4) declining to provide written informed consent by the patient. The patients were divided into 2 groups according to the screw insertion method: conventional and triangulation methods. Screw placement and fluoroscopy times recorded by the C-arm were compared between the 2 methods. The accuracy of screw placement was evaluated by Smith grading on postoperative CT. Normality tests were conducted to assess the distribution of the quantitative variables and the Chi-square test was used to compare the qualitative variables. RESULTS: The study included a total of 94 patients diagnosed with posterior pelvic ring instability, who underwent percutaneous iliosacral screw placement. The patients were divided into 2 groups: 46 patients treated with the conventional surgical method and 48 patients received the triangulation method. The operation time (61.13±9.69 vs. 35.77±6.27) min and fluoroscopy frequency times (52.15±9.29 vs. 24.40±4.04) of the triangulation method were significantly reduced (p<0.001). CONCLUSIONS The use of a triangular positioning technique for the surface positioning of percutaneous iliosacral screws could reduce the operative time and fluoroscopy frequency. And the screw placement accuracy using this new method was comparable to that using other conventional methods.
Humans ; Retrospective Studies ; Bone Screws ; Pelvic Bones/surgery* ; Male ; Female ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Adult ; Middle Aged ; Fluoroscopy ; Aged ; Sacrum/surgery* ; Operative Time

OBJECTIVE: To compare the effectiveness of O-arm navigation and C-arm navigation for guiding percutaneous long sacroiliac screws in treatment of Denis type Ⅱ sacral fractures. METHODS: A retrospective study was conducted on clinical data of the 46 patients with Denis type Ⅱ sacral fractures between April 2021 and October 2022. Among them, 19 patients underwent O-arm navigation assisted percutaneous long sacroiliac screw fixation (O-arm navigation group), and 27 patients underwent C-arm navigation assisted percutaneous long sacroiliac screw fixation (C-arm navigation group). There was no significant difference in gender, age, causes of injuries, Tile classification of pelvic fractures, combined injury, the interval from injury to operation between the two groups ( P>0.05). The intraoperative preparation time, the placement time of each screw, the fluoroscopy time of each screw during placement, screw position accuracy, the quality of fracture reduction, and fracture healing time were recorded and compared, postoperative complications were observed. Pelvic function was evaluated by Majeed score at last follow-up. RESULTS: All operations were completed successfully, and all incisions healed by first intention. Compared to the C-arm navigation group, the O-arm navigation group had shorter intraoperative preparation time, placement time of each screw, and fluoroscopy time, with significant differences ( P<0.05). There was no significant difference in screw position accuracy and the quality of fracture reduction ( P>0.05). There was no nerve or vascular injury during screw placed in the two groups. All patients in both groups were followed up, with the follow-up time of 6-21 months (mean, 12.0 months). Imaging re-examination showed that both groups achieved bony healing, and there was no significant difference in fracture healing time between the two groups ( P>0.05). During follow-up, there was no postoperative complications, such as screw loosening and breaking or loss of fracture reduction. At last follow-up, there was no significant difference in pelvic function between the two groups ( P>0.05). CONCLUSION Compared with the C-arm navigation, the O-arm navigation assisted percutaneous long sacroiliac screws for the treatment of Denis typeⅡsacral fractures can significantly shorten the intraoperative preparation time, screw placement time, and fluoroscopy time, improve the accuracy of screw placement, and obtain clearer navigation images.
Humans ; Fracture Fixation, Internal/methods* ; Retrospective Studies ; Imaging, Three-Dimensional ; Bone Screws ; Surgery, Computer-Assisted ; Tomography, X-Ray Computed ; Spinal Fractures/surgery* ; Fractures, Bone/surgery* ; Pelvic Bones/injuries* ; Postoperative Complications ; Neck Injuries

OBJECTIVE: To investigate the effectiveness of sacroiliac screw implantation assisted by three-dimensional (3D) printed faceted honeycomb guide plate in the treatment of posterior pelvic ring fracture. METHODS: The clinical data of 40 patients with posterior pelvic ring fractures treated with sacroiliac screw implantation between December 2019 and December 2022 were retrospectively analyzed. Among them, 18 cases were treated with sacroiliac screws fixation assisted by 3D printed faceted honeycomb guide plate (guide plate group), and 22 cases were treated with sacroiliac screws percutaneously fixation under fluoroscopy (conventional group). There was no significant difference in baseline data ( P>0.05) such as gender, age, time from injury to operation, and Dennis classification between the two groups. The implantation time, frequency of C-arm X-ray fluoroscopy, frequency of guide pin adjustment of each sacroiliac screw, and postoperative complications and bone healing were recorded. Majeed score was used to evaluate the functional recovery at 6 months after operation, and CT was used to observe whether the screw penetrated the bone cortex. The deviation between the virtual position and the actual position of the screw tip, the sacral foramen, and the screw entry point was measured on the sagittal CT images of the guide plate group. RESULTS: The number of screws implanted in S ₁ and S ₂ vertebral bodies was 14 and 16 respectively in the guide plate group, and 17 and 18 respectively in the conventional group. The implantation time of each sacroiliac screw, the frequency of C-arm X-ray fluoroscopy, and the frequency of guide pin adjustment in S ₁, S ₂, and all vertebrae in the guide plate group were significantly less than those in the conventional group ( P<0.05). Patients in both groups were followed up 8-48 months, with an average of 19.7 months. There was no incision infection, screw displacement, or internal fixation loosening in both groups. Callus growth was observed in all patients at 12 weeks after operation, and bone healing was achieved in all patients. The healing time ranged from 12 to 24 weeks, with an average of 15.7 weeks. No sacroiliac screw penetrated the bone cortex in the guide plate group; 2 patients in the conventional group had sacroiliac screws penetrating the bone cortex without damaging blood vessels or nerves. In the guide plate group, the deviation between the virtual position and the actual position of the screw tip, the sacral foramen, and the screw entry point were (2.91±1.01), (2.10±0.74), and (1.67±0.70) mm, respectively, with an average deviation of (2.19±1.22) mm. There was no significant difference in Majeed function evaluation between the two groups at 6 months after operation ( P>0.05). CONCLUSION The application of 3D printed faceted honeycomb guide plate in sacroiliac screw implantation for posterior pelvic ring fracture can shorten the screw implantation time, reduce the frequency of fluoroscopy and guide pin adjustment, and reduce the risk of screw penetration through the bone cortex.
Humans ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Printing, Three-Dimensional ; Bone Plates ; Fractures, Bone/surgery* ; Pelvic Bones/surgery* ; Retrospective Studies ; Treatment Outcome ; Male ; Female ; Middle Aged ; Adult