Complex crown-root fractures in the esthetic zone refer to a type of dental trauma occurring in the anterior region, characterized by concurrent fractures involving both the crown and the root, with associated pulp exposure and periodontal tissue injury. These injuries consistently exhibit critical anatomical features, including a fixed palatal fracture location below the alveolar crest, compromised residual tooth structure, and frequent encroachment of the biological width. To predict treatment outcomes, a risk assessment framework based on the restoration-tooth-periodontium interface was developed. Resistance risk was evaluated by assessing the type of residual dentin ferrule and the length of the root within the alveolar bone, while periodontal risk was assessed according to gingival phenotype and alveolar bone morphology. Based on these risk dimensions and the principles of aesthetics, stability, and minimally invasive treatment, a diagnostic classification system was established to categorize fractures into three types: favorable, intervention and high-risk. Type-specific management strategies were proposed: for favorable cases, crown lengthening combined with deep margin elevation to reduce periodontal risk is recommended; for intervention cases, orthodontic extrusion or surgical extrusion is applied to simultaneously address both ferrule deficiency and biological width violation; for high-risk cases, extraction followed by implant restoration is advised due to limited root preservation value. The presented classification enables clinicians to adopt a scientific and structured approach to treatment planning for these complex crown-root fractures in the aesthetic zone.
Humans ; Tooth Fractures/therapy* ; Tooth Root/injuries* ; Risk Assessment ; Tooth Crown/injuries* ; Periodontium ; Esthetics, Dental ; Dental Restoration, Permanent/methods*

Achieving precise restoration of tooth function and personalized restoration of natural tooth esthetics has always been a significant challenge in direct restorative dentistry. The traditional direct restorative techniques are limited by the subjective operations of dentists, resulting in high technical sensitivity, long operation time, and unpredictable restoration results, making it difficult to meet patients' personalized demands for restoration outcomes. An innovative flowable resin injection technique was introduced in this study. By combining digital design with personalized restoration guides, this technique achieves precise and personalized tooth restoration, thus revolutionizing the traditio-nal paradigm of direct tooth restoration. Specifically, this technique is guided by the patient's subjective aesthetic needs. It utilizes digital technology to pre-design the restoration result and creates a personalized restoration guide. During clinical operation, the dentist needs to only precisely inject the flowable resin into the guide, allowing for rapid completion of the restoration, thereby significantly reducing the operation time and improving the precision and predictability of the restoration. The perfect combination of digital design and flowable resin injection not only significantly improves the precision and predictability of direct tooth restoration but also remarkably shortens the clinical operation time and reduces the requirements for the dentist's technical level, making it widely applicable to the restoration of various tooth defects. Thus, it improves patient satisfaction and reduces the workload of dentists. This innovative restoration technique is expected to become a new productive force in future clinical direct adhesive restorations.
Humans ; Dental Restoration, Permanent/methods* ; Esthetics, Dental ; Composite Resins ; Computer-Aided Design ; Injections

OBJECTIVES: This study aimed to analyze the correlations and proportional relationships between maxillary anterior teeth (MAT) and facial measurements in Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals. METHODS: Ten dentists with more than 5 years of clinical experience from different professional directions in a tertiary stomatological hospital were selected to evaluate the smile attractiveness of volunteers by visual analogue scale (VAS). Eighty-eight Han volunteers with the most attractive smile were selected. The perceived width of the MAT, the dimensions (height and width) of the maxillary central incisors (MCI), and the facial dimensions (intercanthal distance, interzygomatic distance, interalar distance, facial height and lower facial height) of the volunteers were measured on the frontal photos of the smile, digital oral model, and 3D face model. Pearson correlation analysis was performed to analyze linear correlations, and regression analysis was carried out to explore the proportional relationships. Reliability analysis using the intraclass correlation coefficient verified the stability of these proportional relationships. In addition, the correlations between MAT perceived width and the proportional relationships of (MCI) height to width ratio, with facial dimensions were explored and their reliability was verified. RESULTS: In Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals, the Pearson correlation coefficients among MAT perceived widths were 0.813, 0.389, and 0.560. A proportional relationship existed between the lateral incisor and central incisor, and the ratio was 0.729. No significant correlations were found between MCI and the inner canthal distance, zygomatic distance, interalar distance, facial height, or the lower one-third facial height except for a negative correlation (r=-0.357) between MCI height and facial height in males and a positive correlation (r=0.249) between MCI width and interalar width when genders were combined. CONCLUSIONS Correlations exist among MAT perceived widths in Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals. Partial correlations are observed between MCI height and width and facial measurements. The perceived width of the lateral incisor can serve as a reference indicator for predicting the perceived width of the central incisor, providing a reference for the aesthetic restoration of MAT in the Han ethnicity population.
Adult ; Female ; Humans ; Male ; China ; Esthetics, Dental ; Face/anatomy & histology* ; Incisor/anatomy & histology* ; Maxilla/anatomy & histology* ; Smiling ; East Asian People

With the increasing demand for dental aesthetic outcomes, techniques for composite resin restoration intended for anterior teeth have been widely applied due to their minimally invasive and superior esthetic performance. Despite promising short-term outcomes, the long-term prognosis of anterior resin restorations remains challenging. Frequently reported complications include restoration fractures and decoloration. Material selection, operative procedures, and patient-related factors can affect the long-term outcomes of restorations. This review aims to systematically analyze the long-term clinical performance of resin restorations in anterior teeth. The key factors influencing treatment efficacy are also investigated. The findings are expected to provide a basis for optimizing clinical strategies in procedures for anterior composite resin restoration.
Humans ; Composite Resins ; Dental Restoration, Permanent/methods* ; Prognosis ; Esthetics, Dental ; Treatment Outcome ; Time Factors

Fused teeth were a phenomena of teeth anomalies in shape, which can affect the dental teeth both in primary and permanent dentition. Fused teeth do not only cause problems on crowding of dentition, abnormal occlusion and aesthetic, but also increase risks of dental caries, endodontics diseases, periapical diseases and periodontal diseases. Fusion of deciduous teeth may lead to abnormality of subsequent permanent teeth. Treatment of fused teeth may require multidisciplinary approach in endodontics, periodontics, oral and maxillofacial surgery, prosthodontics and orthodontics. The aim of the present article is to review the etiology, classification, clinical manifestations and treatment of fused teeth in order to provide dental clinicians with a reference of clinical management for fused teeth.
Humans ; Fused Teeth/therapy* ; Anodontia ; Tooth, Deciduous ; Dental Caries/therapy* ; Esthetics, Dental

Humans ; Esthetics, Dental ; Dental Implantation, Endosseous ; Dental Implants, Single-Tooth

OBJECTIVES: To investigate the effect of different soft-tissue morphologies on the treatment of skeletal class Ⅰ malocclusion patients by analyzing measurement data before and after treatment. METHODS: Pre- and post-treatment lateral cephalograms of 55 adult female Angle class Ⅰ patients were collected in the Department of Orthodontics, Hospital of Stomatology, Jilin University from January 2012 to December 2020. Chin soft-tissue morphologies in the lateral cranial radiographs were used to divide the patients into an abnormal chin morphology group (flat and retracted chins, n=27) and a normal chin morphology group (rounded and prominent chins, n=28). Relevant soft- and hard-tissue indexes were selected to study in-group varieties and intergroup differences in the varying chin morphologies before and after treatment. RESULTS: The chin-lip angle, mandibular chin angle, mandibular chin vertex angle, PP-MP, LL-E, UL-E, Po-Pos, and B-B' thickness in the abnormal chin morphology group were significantly higher than those in the normal chin morphology group (P<0.05). Furthermore, m∶BMe and n∶B'Mes in the abnormal chin morphology group were signi-ficantly lower than those in the normal chin morphology group (P<0.05). After treatment, the mandibular chin angle, mandibular chin vertex angle, U1-SN, L1-MP, LL-E, UL-E, SNA, SNB, and B-B' thickness of the abnormal chin morphology group significantly decreased (P<0.05), whereas the nasolabial angle, m∶BMe, n∶B' Mes, and Po-Pos significantly increased (P<0.05). In the normal chin morphology group, the U1-SN, L1-MP, LL-E, UL-E, and B-B' thicknesses decreased significantly (P<0.05), whereas the nasolabial angle significantly increased (P<0.05). Among them, m∶BMe and n∶B' Mes were positively correlated. CONCLUSIONS Chin morphology affects the formulation of treatment plans. Compared with the normal chin morphology group, the abnormal chin morphology group required a larger retraction of incisors. Although the chin of soft-tissue morphology is related to the morphology of bones, the changes in soft tissue chin after treatment cannot be directly predicted according to the bone changes. Soft-tissue chin morphology affects the aesthetic assessment of the soft-tissue lateral profile and the change in soft tissue before and after treatment. The method of predicting the change in soft-tissue chin after treatment should consider the morphology of the soft-tissue chin.
Adult ; Humans ; Female ; Chin ; Lip ; Cephalometry/methods* ; Esthetics, Dental ; Mandible

OBJECTIVES: This study aimed to evaluate the efficacy and long-term stability of tunnel technique (TUN) and coronally advanced flap (CAF) combined with connective tissue graft (CTG) in treating gingival recession. METHODS: Databases including PubMed, Web of Science, Embase, and CNKI were electronically searched to collect randomized controlled trial (RCT) of CAF+CTG compared to TUN+CTG in the treatment of Miller class Ⅰ or Ⅱ gingival recession on September 1, 2022. RESULTS: There were 8 RCTs with 305 patients (454 recession sites) participating. The results of the Meta-analysis revealed that, in terms of mean root coverage (MRC) of main indicators, no significant difference was found between the CAF group and the TUN group in both short- and long-term results, which were [MD: 1.45%, 95%CI (-2.93%, 5.82%), P=0.52] and [MD: -0.70%, 95%CI (-6.41%, 5.00%), P=0.81]. However, the CAF group outperformed the TUN group in the long term [MD: 5.69%, 95%CI (0.87%, 10.50%), P=0.02], and the results of complete root coverage (CRC) analysis were similar to those of MRC. In the short term, the TUN group grew keratinized gingiva significantly faster than the CAF group [MD: -0.38 mm, 95%CI (-0.67 mm, -0.10 mm), P=0.008]. Long-term findings revealed no significant difference between the two groups [MD: -0.26 mm, 95%CI (-0.94 mm, 0.43 mm), P=0.46]. The TUN group's secondary index root coverage esthetic score (RES) was statistically significantly higher than the CAF group's [MD: 0.62, 95%CI (0.28, 0.96), P=0.000 3]. Given that there were few results included in the literature and the heterogeneity was too great, no significant difference was observed in the postoperative VAS pain index score [MD: 0.53, 95%CI (-1.96, 3.03), P=0.68]. CONCLUSIONS This study discovered that both CAF+CTG and TUN+CTG can achieve good root coverage in treating gingival recession, with CAF outperforming TUN and both groups achie-ving good long-term stability. After the operation, the TUN group had a higher RES than the CAF group. Given the limitations of this study, more high-quality studies are needed in the future to demonstrate the efficacy of TUN in gingival retraction surgery.
Humans ; Gingival Recession/surgery* ; Treatment Outcome ; Tooth Root ; Esthetics, Dental ; Gingiva/surgery*

Implant treatment in the esthetic area requires stable osseointegration and successful esthetic outcomes. Achieving this goal requires careful consideration of accurate implant axis and ideal three-dimensional position. Owing to the high esthetics and the special anatomical structure of the maxillary, a successful implant means a synthesized deli-beration of the residual bone dimensions, soft-tissue thickness, and the relationship of the residual alveolar ridge with the planned restoration. This article offers an in-depth analysis of the clinical decisions and key factors affecting the implant direction in the esthetic area.
Dental Implantation, Endosseous/methods* ; Dental Implants ; Esthetics, Dental ; Alveolar Ridge Augmentation/methods* ; Osseointegration ; Maxilla/surgery* ; Dental Implants, Single-Tooth

OBJECTIVES: To summarize the open-eruption technique of impacted anterior maxillary teeth, this study reports a technically improved operation on surgical exposure based on dental follicles and evaluates post-treatment periodontal health considering the effect of dental follicles. METHODS: Patients who underwent open-eruption technique with unilateral labially impacted maxillary central incisors were selected. The impacted teeth were assigned to the experimental group, and the contralateral unimpacted maxillary central incisors were assigned to the control group. In the surgical exposure, the new technique makes use of dental follicles to manage the soft tissue, so as to preserve soft tissue for better aesthetic results and healthier periodontal tissue. Tooth length, root length, alveolar bone loss, and alveolar bone thickness were recorded after the therapy. RESULTS: A total of 17 patients with unilateral maxillary central incisor impaction were successfully treated. The tooth length and root length of the two groups showed a statistically significant difference between the impacted and homonym teeth, with a shorter length in the impacted tooth (P<0.05). More labial alveolar bone loss was found in the experimental group compared with that in the control group (P<0.05). The outcomes of the cementoenamel junction width, pa- latal alveolar bone loss, and alveolar bone thickness did not indicate statistical significance between the experimental and control groups (P>0.05). CONCLUSIONS In the surgical exposure, the new technique uses dental follicles to manage the soft tissue and preserve it for better aesthetic results and healthier periodontal tissues.
Humans ; Tooth, Impacted/surgery* ; Incisor ; Alveolar Bone Loss/diagnostic imaging* ; Tooth Root ; Dental Sac ; Maxilla/surgery* ; Esthetics, Dental