The three-dimensional (3D) printed bone tissue repair guide scaffold is considered a promising method for treating bone defect repair. In this experiment, chitosan (CS), sodium alginate (SA), and mineralized collagen (MC) were combined and 3D printed to form scaffolds. The experimental results showed that the printability of the scaffold was improved with the increase of chitosan concentration. Infrared spectroscopy analysis confirmed that the scaffold formed a cross-linked network through electrostatic interaction between chitosan and sodium alginate under acidic conditions, and X-ray diffraction results showed the presence of characteristic peaks of hydroxyapatite, indicating the incorporation of mineralized collagen into the scaffold system. In the in vitro collagen release experiments, a weakly alkaline environment was found to accelerate the release rate of collagen, and the release amount increased significantly with a lower concentration of chitosan. Cell experiments showed that scaffolds loaded with mineralized collagen could significantly promote cell proliferation activity and alkaline phosphatase expression. The subcutaneous implantation experiment further verified the biocompatibility of the material, and the implantation of printed scaffolds did not cause significant inflammatory reactions. Histological analysis showed no abnormal pathological changes in the surrounding tissues. Therefore, incorporating mineralized collagen into sodium alginate/chitosan scaffolds is believed to be a new tissue engineering and regeneration strategy for achieving enhanced osteogenic differentiation through the slow release of collagen.
Chitosan/chemistry* ; Alginates/chemistry* ; Tissue Scaffolds/chemistry* ; Printing, Three-Dimensional ; Osteogenesis ; Collagen/chemistry* ; Cell Differentiation ; Animals ; Tissue Engineering/methods* ; Cell Proliferation ; Biocompatible Materials ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry*

OBJECTIVES: To investigate the mechanism by which chitosan (CS) hydrogel loaded with human umbilical cord mesenchymal stem cell (HUVECs)-derived exosomes (hUCMSC-exos) (Exos@CS-Gel) improves diabetic wound healing. METHODS: hUCMSC-exos were extracted and Exos@CS-Gel was prepared. The effect of Exos@CS-Gel on proliferation and migration of HUVECs were evaluated using scratch wound assay and CCK-8 assay. Diabetic rat models with full-thickness skin wounds established by streptozotocin induction were randomized divided into 4 groups for treatment with Exos@CS-Gel (100 µg hUCMSC-exos dissolved in 100 µL 24% CS hydrogel), hUCMSC-exos (100 µg hUCMSC-exos dissolved in 100 µL PBS), CS hydrogel (100 µL 24% CS hydrogel), or PBS (control group). Wound healing and the therapeutic mechanisms were assessed using immunohistochemistry, HE staining, immunofluorescence, and qRT-PCR. RESULTS: In cultured HUVECs, Exos@CS-Gel treatment significantly promoted cell proliferation and migration. In the rat models of chronic diabetic wounds, the wound healing rate in Exos@CS-Gel group reached 92.7% on day 14, significantly higher than those in hUCMSC-exos group (9.12%), CS hydrogel group (16.28%), and control group (25.98%). Microvessel density and the expression levels of vascular endothelial growth factor and transforming growth factor β-1 were significantly increased in the Exos@CS-Gel group. CONCLUSIONS Exos@CS-Gel promotes survival capacity of hUCMSC-exos in vitro and accelerates diabetic wound healing in rats by promoting angiogenesis and cell proliferation.
Animals ; Wound Healing ; Humans ; Chitosan ; Exosomes ; Mesenchymal Stem Cells/cytology* ; Diabetes Mellitus, Experimental ; Rats ; Umbilical Cord/cytology* ; Hydrogels ; Human Umbilical Vein Endothelial Cells ; Cell Proliferation ; Rats, Sprague-Dawley ; Male

To screen and identify a chitosanase with high stability, we cloned the chitosanase gene from Bacillus atrophaeus with a high protease yield from the barren saline-alkali soil and expressed this gene in Escherichia coli. The expressed chitosanase of B. atrophaeus (BA-CSN) was purified by nickel-affinity column chromatography. The properties including optimal temperature, optimal pH, substrate specificity, and kinetic parameters of BA-CSN were characterized. The results showed that BA-CSN had the molecular weight of 31.13 kDa, the optimal temperature of 55 ℃, the optimal pH 5.5, and good stability at temperatures below 45 ℃ and pH 4.0-9.0. BA-CSN also had good stability within 4 h of pH 3.0 and 10.0, be activated by K⁺, Na⁺, Mn²⁺, Ca²⁺, Mg²⁺, and Co²⁺, (especially by Mn²⁺), and be inhibited by Fe³⁺, Cu²⁺, and Ag⁺. BA-CSN showcased the highest relative activity in the hydrolysis of colloidal chitosan, and it had good hydrolysis ability for colloidal chitin. Under the optimal catalytic conditions, BA-CSN demonstrated the Michaelis constant K_m and maximum reaction rate V_max of 9.94 mg/mL and 26.624 μmoL/(mL·min), respectively, for colloidal chitosan. In short, BA-CSN has strong tolerance to acids and alkali, possessing broad industrial application prospects.
Bacillus/genetics* ; Hydrogen-Ion Concentration ; Escherichia coli/metabolism* ; Glycoside Hydrolases/biosynthesis* ; Substrate Specificity ; Enzyme Stability ; Chitosan/metabolism* ; Temperature ; Kinetics ; Cloning, Molecular ; Bacterial Proteins/biosynthesis* ; Recombinant Proteins/genetics*

The development of safe and effective carriers is crucial for improving the in vivo stability of siRNA drugs and facilitating their clinical translation. Chitosan (CS), a natural cationic polymer, shows great potential in nucleic acid drug delivery. To optimize the physicochemical properties of CS/siRNA nanoparticles (NPs) and increase their siRNA delivery efficacy, in this study, hyaluronic acid (HA) was added into CS to form stable complex NPs through electrostatic interactions. The HA component is able to target the CD44 receptors on the surface of tumor cells, facilitating efficient siRNA delivery. First, we systematically investigated the effects of the molecular weights and mass ratio of CS and HA on the physicochemical properties of CS/HA NPs. The results showed that at HA: CS mass ratios of approximately 5:5 and 6:4, the complex NPs exhibited small particle sizes, narrow size distribution, and high storage stability. Under similar conditions, the size of CS/HA NPs increased with the increase in the molecular weights of CS and HA. Based on these findings, suitable conditions were selected to prepare CS/HA NPs for siRNA delivery. Cell experiments demonstrated that the introduction of HA effectively reduced the cytotoxicity of the CS delivery system and enhanced the NP uptake. The CS/HA/siRNA NPs achieved 50% to 60% silencing of the luciferase gene in HeLa-Luc cells. CS/HA NPs formed smaller nanoparticles with siRNA than pure CS and mediated specific interactions with tumor cells via HA, leading to efficient siRNA delivery. These findings provide valuable insights into the construction of natural polymer composite nanoparticles for application in siRNA delivery.
Hyaluronic Acid/chemistry* ; Chitosan/chemistry* ; RNA, Small Interfering/administration & dosage* ; Nanoparticles/chemistry* ; Humans ; Particle Size ; HeLa Cells ; Hyaluronan Receptors

We have isolated an intestinal probiotic strain, Pediococcus acidilactici HRQ-1. To improve its gastrointestinal fluid tolerance, transportation and storage stability, and slow-release properties, we employed the extrusion method to prepare the microcapsules with P. acidilactici HRQ-1 as the core material and sodium alginate and chitosan as the wall material. The optimal conditions for preparing the microcapsules were determined by single factor and orthogonal tests, and the optimal ratio was determined by taking the embedding rate, survival rate, storage stability, gastrointestinal fluid tolerance, and release rate as the evaluation indexes. The results showed that under the optimal embedding conditions, the embedding rate reached (89.60±0.02)%. Under the optimal formula of freeze-drying protective agent, the freeze-drying survival rate reached (76.42±0.13)%, and the average size of the microcapsules produced was (1.16±0.03) mm. The continuous gastrointestinal fluid simulation experiments confirmed that the microcapsules ensured the viable bacterial count and can slowly release bacteria in the intestinal fluid. The curve of the viable bacterial count during storage at 4 ℃ and room temperature indicated that the prepared microcapsules achieved strains' live number protection. The formula and preparation process of P. acidilactici microcapsules may provide a technological reserve for the preparation of more live bacterial drugs in the future.
Pediococcus acidilactici/chemistry* ; Probiotics/chemistry* ; Capsules/chemistry* ; Alginates/chemistry* ; Chitosan/chemistry* ; Drug Compounding/methods* ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry* ; Freeze Drying

OBJECTIVE: To explore the effect of chitosan (CS) hydrogel loaded with tendon-derived stem cells (TDSCs; hereinafter referred to as TDSCs/CS hydrogel) on tendon-to-bone healing after rotator cuff repair in rabbits. METHODS: TDSCs were isolated from the rotator cuff tissue of 3 adult New Zealand white rabbits by Henderson step-by-step enzymatic digestion method and identified by multidirectional differentiation and flow cytometry. The 3rd generation TDSCs were encapsulated in CS to construct TDSCs/CS hydrogel. The cell counting kit 8 (CCK-8) assay was used to detect the proliferation of TDSCs in the hydrogel after 1-5 days of culture in vitro, and cell compatibility of TDSCs/CS hydrogel was evaluated by using TDSCs alone as control. Another 36 adult New Zealand white rabbits were randomly divided into 3 groups ( n=12): rotator cuff repair group (control group), rotator cuff repair+CS hydrogel injection group (CS group), and rotator cuff repair+TDSCs/CS hydrogel injection group (TDSCs/CS group). After establishing the rotator cuff repair models, the corresponding hydrogel was injected into the tendon-to-bone interface in the CS group and TDSCs/CS group, and no other treatment was performed in the control group. The general condition of the animals was observed after operation. At 4 and 8 weeks, real-time quantitative PCR (qPCR) was used to detect the relative expressions of tendon forming related genes (tenomodulin, scleraxis), chondrogenesis related genes (aggrecan, sex determining region Y-related high mobility group-box gene 9), and osteogenesis related genes (alkaline phosphatase, Runt-related transcription factor 2) at the tendon-to-bone interface. At 8 weeks, HE and Masson staining were used to observe the histological changes, and the biomechanical test was used to evaluate the ultimate load and the failure site of the repaired rotator cuff to evaluate the tendon-to-bone healing and biomechanical properties. RESULTS: CCK-8 assay showed that the CS hydrogel could promote the proliferation of TDSCs ( P<0.05). qPCR results showed that the expressions of tendon-to-bone interface related genes were significantly higher in the TDSCs/CS group than in the CS group and control group at 4 and 8 weeks after operation ( P<0.05). Moreover, the expressions of tendon-to-bone interface related genes at 8 weeks after operation were significantly higher than those at 4 weeks after operation in the TDSCs/CS group ( P<0.05). Histological staining showed the clear cartilage tissue and dense and orderly collagen formation at the tendon-to-bone interface in the TDSCs/CS group. The results of semi-quantitative analysis showed that compared with the control group, the number of cells, the proportion of collagen fiber orientation, and the histological score in the TDSCs/CS group increased, the vascularity decreased, showing significant differences ( P<0.05); compared with the CS group, the proportion of collagen fiber orientation and the histological score in the TDSCs/CS group significantly increased ( P<0.05), while there was no significant difference in the number of cells and vascularity ( P>0.05). All samples in biomechanical testing failed at the repair site during the testing process. The ultimate load of the TDSCs/CS group was significantly higher than that of the control group ( P<0.05), but there was no significant difference compared to the CS group ( P>0.05). CONCLUSION TDSCs/CS hydrogel can induce cartilage regeneration to promote rotator cuff tendon-to-bone healing.
Rabbits ; Animals ; Rotator Cuff/surgery* ; Chitosan ; Hydrogels ; Rotator Cuff Injuries/surgery* ; Wound Healing ; Tendons/surgery* ; Collagen ; Stem Cells ; Biomechanical Phenomena

Collagen contains abundant cell binding motifs, which are conducive to adhesion, migration, and differentiation, maintain cell vitality and promote cell proliferation. However, pure collagen hydrogel has some shortcomings such as poor mechanical properties, poor thermal stability and fast degradation. Numerous studies have shown that the properties of collagen can be improved by combining it with natural polysaccharides such as alginate, chitosan, hyaluronic acid and cellulose. In this paper, the research status and biological application fields of four kinds of composite hydrogels, including collagen-alginate composite hydrogels, collagen-chitosan hydrogels, collagen-hyaluronic acid hydrogels and collagen-cellulose hydrogels, were summarized. The common preparation methods of four kinds of composite hydrogels were introduced, and the future development direction of collagen-based composite hydrogels was prospected.
Hydrogels/chemical synthesis* ; Collagen/chemistry* ; Polysaccharides/chemistry* ; Alginates/chemistry* ; Hyaluronic Acid/chemistry* ; Chitosan/chemistry* ; Biocompatible Materials/chemistry* ; Humans ; Tissue Engineering/methods* ; Cellulose/chemistry* ; Tissue Scaffolds

OBJECTIVE: The application progress of medical absorbable haemostatic material (MAHM) in hemostasis during orthoapedic surgery was reviewed, in order to provide reference for clinical hemostasis program. METHODS: The domestic and foreign literature on the application of MAHM for hemostasis in orthopedic surgery was extensively reviewed and summarized. RESULTS: According to biocompatibility, MAHM can be divided into oxidized cellulose/oxidized regenerated cellulose materials, chitosan and its derivatives materials, starch materials, collagen and gelatin materials, and fibrin glue materials, etc., which can effectively reduce blood loss when used in orthopedic surgery for hemostasis. Each hemostatic material has different coagulation mechanism and suitable population. Oxidized cellulose/oxidized regenerated cellulose, chitosan and its derivatives, starch hemostatic material mainly stops bleeding by stimulating blood vessel contraction and gathering blood cells, which is suitable for people with abnormal coagulation function. Collagen, gelatin and fibrin glue hemostatic materials mainly affect the physiological coagulation mechanism of the human body to stop bleeding, suitable for people with normal coagulation function. CONCLUSION Reasonable selection of MAHM can effectively reduce perioperative blood loss and reduce the risk of postoperative complications, but at present, single hemostatic material can not meet clinical needs, and a new composite hemostatic material with higher hemostatic efficiency needs to be developed.
Humans ; Hemostatics ; Orthopedic Procedures/methods* ; Hemostasis, Surgical/methods* ; Biocompatible Materials ; Cellulose, Oxidized ; Chitosan ; Fibrin Tissue Adhesive ; Gelatin ; Blood Loss, Surgical/prevention & control* ; Hemostasis/drug effects*

This study aims to optimize the process for preparing chitosan-based ultrasound-coupled hydrogel pads and investigate their application potential in ultrasonography. Chitosan, 2-acrylamido-2-methylpropanesulfonic acid, and N-isopropylacrylamide were used as the main materials to prepare chitosan-based ultrasound-coupled hydrogel pads. The free-radical polymerization conditions were optimized by a three-factor, three-level orthogonal test with the tensile strength and ultrasound image quality of the hydrogel pads as evaluation indicators. The optimal prescription was selected by optimizing three factors of raw material ratio, polymerization temperature, and freeze-drying time. The structure and performance of the hydrogel pads were characterized by a scanning electron microscope, a universal testing machine, and an ultrasonic diagnostic instrument. The results showed that the optimal prescription was as follows: the chitosan: 2-acrylamide-2-methylpropanesulfonic acid: N-isopropylacrylamide ratio of 2:0.55:17.27, the polymerization temperature of 25 ℃, and the freeze-drying time of 48 h. The ultrasonically-coupled hydrogel pads prepared under these conditions were transparent, with a porous structure, good adhesion, and high tensile strength. The hydrogel pads had good swelling properties and the swelling degree decreased slowly on day 10. The quality of the ultrasound images obtained via chitosan-based hydrogel pads was not significantly different from that obtained via medical ultrasound coupling agent. In this study, we analyzed the effects of different preparation processes on the gel formation of chitosan-based ultrasound-coupled hydrogel pads. The hydrogel pads were transparent and mild and non-irritating to the human body, serving as an ultrasound transmission material for ultrasonography.
Chitosan/chemistry* ; Hydrogels/chemistry* ; Acrylamides/chemistry* ; Ultrasonography ; Polymerization ; Sulfonic Acids/chemistry* ; Alkanesulfonates/chemistry* ; Tensile Strength ; Freeze Drying ; Temperature

The biofilms formed by pathogenic microorganisms seriously threaten human health and significantly enhance drug resistance, which urgently call for developing drugs specifically targeting on biofilms. Chitooligosaccharides extracted from shrimp and crab shells are natural alkaline oligosaccharides with excellent antibacterial effects. Nevertheless, their inhibition efficacy on biofilms still needs to be improved. Spirulina (SP) is a microalga with negatively charged surface, and its spiral structure facilitates colonization in the depth of the biofilm. Therefore, the complex of Spirulina and chitooligosaccharides may play a synergistic role in killing pathogens in the depth of biofilm. This research first screened chitooligosaccharides with significant bactericidal effects. Subsequently, Spirulina@Chitooligosaccharides (SP@COS complex was prepared by combining chitooligosaccharides with Spirulina through electrostatic adsorption. The binding of the complex was characterized by zeta potential, z-average size, and fluorescence labeling. Ultraviolet-visible spectroscopy (UV-Vis) showed the encapsulation efficiency and the drug loading efficiency reached up to 90% and 16%, respectively. The prepared SP@COS2 exhibited a profound synergistic inhibition effect on bacterial and fungal biofilms, which was mainly achieved by destroying the cell structure of the biofilm. These results demonstrate the potential of Spirulina-chitooligosaccharides complex as a biofilm inhibitor and provide a new idea for addressing the harm of pathogenic microorganisms.
Humans ; Spirulina ; Anti-Bacterial Agents/chemistry* ; Chitosan/pharmacology* ; Biofilms ; Chitin/pharmacology*