OBJECTIVE: To summarize the research progress of bioactive scaffolds in the repair and regeneration of osteoporotic bone defects. METHODS: Recent literature on bioactive scaffolds for the repair of osteoporotic bone defects was reviewed to summarize various types of bioactive scaffolds and their associated repair methods. RESULTS: The application of bioactive scaffolds provides a new idea for the repair and regeneration of osteoporotic bone defects. For example, calcium phosphate ceramics scaffolds, hydrogel scaffolds, three-dimensional (3D)-printed biological scaffolds, metal scaffolds, as well as polymer material scaffolds and bone organoids, have all demonstrated good bone repair-promoting effects. However, in the pathological bone microenvironment of osteoporosis, the function of single-material scaffolds to promote bone regeneration is insufficient. Therefore, the design of bioactive scaffolds must consider multiple factors, including material biocompatibility, mechanical properties, bioactivity, bone conductivity, and osteogenic induction. Furthermore, physical and chemical surface modifications, along with advanced biotechnological approaches, can help to improve the osteogenic microenvironment and promote the differentiation of bone cells. CONCLUSION With advancements in technology, the synergistic application of 3D bioprinting, bone organoids technologies, and advanced biotechnologies holds promise for providing more efficient bioactive scaffolds for the repair and regeneration of osteoporotic bone defects.
Humans ; Tissue Scaffolds/chemistry* ; Bone Regeneration ; Osteoporosis/therapy* ; Tissue Engineering/methods* ; Biocompatible Materials/chemistry* ; Printing, Three-Dimensional ; Calcium Phosphates/chemistry* ; Osteogenesis ; Ceramics ; Cell Differentiation ; Hydrogels ; Bioprinting ; Bone and Bones

Dental pulp-dentin complex defects remain a major unresolved problem in oral medicines. Clinical therapeutic methods including root canal therapy and vital pulp therapy are both considered as conservative strategies, which are incapable of repairing the pulp-dentin complex defects. Although biomaterial-based strategies show remarkable progress in antibacterial, anti-inflammatory, and pulp regeneration, the important modulatory effects of nerves within pulp cavity have been greatly overlooked, making it challenging to achieve functional pulp-dentin complex regeneration. In this study, we propose an injectable bioceramics-containing composite hydrogel in combination of Li-Ca-Si (LCS) bioceramics and gelatin methacrylate matrix with photo-crosslinking properties. Due to the sustained release of bioactive Li, Ca and Si ions from LCS, the composite hydrogels possess multiple functions of promoting the neurogenic differentiation of Schwann cells, odontogenic differentiation of dental pulp stem cells, and neurogenesis-odontogenesis couples in vitro. In addition, the in vivo results showed that LCS-containing composite hydrogel can significantly promote the pulp-dentin complex repair. More importantly, LCS bioceramics-containing composite hydrogel can induce the growth of nerve fibers, leading to the re-innervation of pulp tissues. Taken together, the study suggests that LCS bioceramics can induce the innervation of pulp-dentin complex repair, offering a referable strategy of designing multifunctional filling materials for functional periodontal tissue regeneration.
Dental Pulp/drug effects* ; Hydrogels/pharmacology* ; Animals ; Ceramics/pharmacology* ; Dentin/drug effects* ; Biocompatible Materials/pharmacology* ; Rats ; Gelatin ; Regeneration/drug effects* ; Cell Differentiation/drug effects* ; Injections ; Humans ; Odontogenesis/drug effects*

OBJECTIVES: The mechanism of the odontogenic differentiation of apical papillary cells (APCs) stimulated by bioactive glass 45S5 is still unclear. This study aims to investigate the effect of autophagy on the odontogenic differentiation of APCs stimulated by bioactive glass 45S5. METHODS: APCs were isolated and cultured in vitro, and the cell origin was identified by flow cytometry. The culture medium was prepared with 1 mg/mL 45S5, and its pH and ion concentration were determined. The experiments were divided into control, 45S5, and 3-methyladenine (3-MA) 45S5 groups. In the 45S5 group, APCs were induced to culture with 1 mg/mL 45S5. In the 3-MA 45S5 group, the autophagy inhibitor 3-MA was added to 1 mg/mL 45S5. Protein immunoblotting assay (Western blot) was used to detect the expression of autophagy-associated proteins of microtubule-associated protein 1 light-chain 3β (LC3B) and P62 after 24 h of induction culture in each group. Real-time quantitative polymerase chain reaction (RT-qPCR) was used to detect the expression of bone sialoprotein (BSP), Runt-related transcription factor 2 (Runx2), dentin sialophosphoprotein (DSPP), and dentin matrix protein-1 (DMP-1) after 7 d of induction culture. Cellular alkaline phosphatase (ALP) staining analyzed cellular ALP activity at 7 d of induction, and alizarin red staining evaluated the formation of mineralized nodules at 21 d of induction. RESULTS: The pH of the 45S5 extract culture medium was 8.65±0.01, which was not significantly different from that of the control group (P>0.05). The silicon ion concentration of the 45S5 induction culture medium was (1.56±0.07) mmol/L, which was higher than that of the control group (0.08±0.01) mmol/L (P<0.05). The calcium ion concentration of the 45S5 induction culture was (1.57±0.15) mmol/L, which was not significantly different from that of the control group (P>0.05). Western blot results showed that LC3B-Ⅱ/Ⅰ ratio increased and P62 expression decreased in the 45S5 group compared with those in the control group (P<0.05). By contrast, the ratio decreased and the expression increased in the 3-MA 45S5 group compared with those in the 45S5 group (P<0.05). RT-qPCR results showed that the expression of BSP, Runx2, DMP-1, and DSPP enhanced in the 45S5 group compared with that in the control group (P<0.05), but the expression decreased in the 3-MA 45S5 group compared with that in the 45S5 group (P<0.05). Semi-quantitative analysis of ALP staining and alizarin red staining showed that the ALP activity was enhanced, and the formation mineralized nodule increased in the 45S5 group compared with those in the control group. The ALP activity weakened, and the formation mineralized nodules were reduced in the 3-MA 45S5 group compared with that those in the 45S5 group. CONCLUSIONS Cell autophagy participates in the odontogenic differentiation of APCs induced by 1 mg/mL 45S5 in vitro.
Autophagy/drug effects* ; Cell Differentiation/drug effects* ; Odontogenesis/drug effects* ; Dental Papilla/cytology* ; Humans ; Microtubule-Associated Proteins/metabolism* ; Glass/chemistry* ; Cells, Cultured ; Core Binding Factor Alpha 1 Subunit/metabolism* ; Extracellular Matrix Proteins/metabolism* ; Ceramics/pharmacology* ; Adenine/pharmacology* ; Sialoglycoproteins/metabolism* ; Phosphoproteins/metabolism* ; Integrin-Binding Sialoprotein/metabolism* ; Alkaline Phosphatase/metabolism* ; RNA-Binding Proteins

OBJECTIVES: This study aims to use 3D prin-ting technology based on the principle of stereo lithography apparatus (SLA) to shape dental lithium disilicate ceramics and study the effects of different slurry proportions on the microstructure and properties of heat-treated samples. METHODS: The experimental group comprised lithium disilicate ceramics manufactured through SLA 3D printing, and the control group comprised lithium disilicate ceramics (IPS e.max CAD) fabricated through commercial milling. An array of different particle sizes of lithium disilicate ceramic powder materials (nano and micron) was selected for mixing with photocurable acrylate resin. The proportion of experimental raw materials was adjusted to prepare five groups of ceramic slurries for 3D printing (Groups S1-S5) on the basis of rheological properties, stability, and other factors. Printing, debonding, and sintering were conducted on the experimental group with the optimal ratio, followed by measurements of microstructure, crystallographic information, shrinkage, and mechanical properties. RESULTS: Five groups of lithium disilicate ceramic slurries were prepared, of which two groups with high solid content (75%) (Groups S2 and S3) were selected for 3D printing. X-ray diffraction and scanning electron microscopy results showed that lithium disilicate was the main crystalline phase in Groups S2 and S3, and its microstructure was slender, uniform, and compact. The average grain sizes of Groups S2 and S3 were (559.79±84.58) nm and (388.26±61.49) nm, respectively (P<0.05). Energy spectroscopy revealed that the samples in the two groups contained a high proportion of Si and O elements. After heat treatment, the shrinkage rate of the two groups of ceramic samples was 18.00%-20.71%. Test results revealed no statistical difference in all mechanical properties between Groups S2 and S3 (P>0.05). The flexural strengths of Groups S2 and S3 were (231.79±21.71) MPa and (214.86±46.64) MPa, respectively, which were lower than that of the IPS e.max CAD group (P<0.05). The elasticity modulus of Groups S2 and S3 were (87.40±12.99) GPa and (92.87±19.76) GPa, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). The Vickers hardness values of Groups S2 and S3 were (6.53±0.19) GPa and (6.25±0.12) GPa, respectively, which were higher than that of the IPS e.max CAD group (P<0.05). The fracture toughness values of Groups S2 and S3 were (1.57±0.28) MPa·m^0.5 and (1.38±0.17) MPa·m^0.5, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). CONCLUSIONS The combination of lithium disilicate ceramic powders with different particle sizes can yield a slurry with high solid content (75%) and suitable viscosity and stability. The dental lithium disilicate ceramic material is successfully prepared by using 3D printing technology. The 3D-printed samples show a small shrinkage rate after heat treatment. Their microstructure conforms to the crystal phase of lithium disilicate ceramics, and their mechanical properties are close to those of milled lithium disilicate ceramics.
Printing, Three-Dimensional ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Materials Testing ; Particle Size

OBJECTIVES: We aimed to compare the apical sealing properties of three endodontic sealers, namely, C-Root SP (C-R), iRoot SP, and GuttaFlow Bioseal (GFB) in vitro. METHODS: Eighty-two single-rooted premolars and anterior teeth were prepared by using M3 machine with nickel-titanium file and randomly divided into six experimental groups (n=12) and two control groups (n=5). Group A1: single-cone technique (SC)+C-R; group B1: SC+iRoot SP; group C1: SC+GFB; group A2: single-cone with ultrasonic activation (SU)+C-R; group B2: SU+iRoot SP; group C2: SU +GFB; group D: positive control group, and group E: negative control group. Dye penetration length and lateral root canal filling in each group were measured by dye penetration test. A scanning electron microscope (SEM) was used to observe the interface between gutta pertscha, root canal sealer, and dentin wall. Dye penetration length was measured and analyzed by Kruskal-Wallis test, and data on lateral root canal filling were evaluated using Chi-square. RESULTS: The dye penetration length in group A1 was lower than that in groups C1 and A2 (P<0.05) but was not significantly different from the other groups (P>0.05). Lateral root canal filling was not significantly different among all groups (P>0.05). SEM showed that GFB was slightly better than C-R and iRoot SP in binding to gutta pertcha and dentin wall. CONCLUSIONS GFB, C-R, and iRoot SP demonstrate excellent apical sealing ability. Under the conditions tested in this study, SU did not yield significantly improve the apical sealing ability of the three root canal sealers.
Root Canal Filling Materials/chemistry* ; Humans ; Gutta-Percha ; Microscopy, Electron, Scanning ; Root Canal Obturation/methods* ; Ceramics ; Dimethylpolysiloxanes ; Drug Combinations

OBJECTIVE: To investigate the preparation and properties of the novel silica (SiO ₂)/hydroxyapatite (HAP) whiskers porous ceramics scaffold. METHODS: The HAP whiskers were modified by the SiO ₂ microspheres using the Stöber method. Three types of SiO ₂/HAP whiskers were fabricated under different factors (for the No.1 samples, the content of tetraethoxysilane, stirring time, calcination temperature, and soaking time were 10 mL, 12 hours, 560℃, and 0.5 hours, respectively; and in the No.2 samples, those were 15 mL, 24 hours, 650℃, and 2 hours, respectively; while those in the No.3 samples were 20 mL, 48 hours, 750℃, and 4 hours, respectively). The phase and morphology of the self-made HAP whisker and 3 types of SiO ₂/HAP whiskers were detected by the X-ray diffraction analysis and scanning electron microscopy. Taken the self-made HAP whisker and 3 types of SiO ₂/HAP whiskers as raw materials, various porous ceramic materials were prepared using the mechanical foaming method combined with extrusion molding method, and the low-temperature heat treatment. The pore structure of porous ceramics was observed by scanning electron microscopy. Its porosity and pore size distribution were measured. And further the axial compressive strength was measured, and the biodegradability was detected by simulated body fluid. Cell counting kit 8 method was used to conduct cytotoxicity experiments on the extract of porous ceramics. RESULTS: The SiO ₂ microspheres modified HAP whiskers and its porous ceramic materials were prepared successfully, respectively. In the SiO ₂/HAP whiskers, the amorphous SiO ₂ microspheres with a diameter of 200 nm, uniform distribution and good adhesion were attached to the surface of the whiskers, and the number of microspheres was controllable. The apparent porosity of the porous ceramic scaffold was about 78%, and its pore structure was composed of neatly arranged longitudinal through-holes and a large number of micro/nano through-holes. Compared with HAP whisker porous ceramic, the axial compressive strength of the SiO ₂/HAP whisker porous ceramics could reach 1.0 MPa, which increased the strength by nearly 4 times. Among them, the axial compressive strength of the No.2 SiO ₂/HAP whisker porous ceramic was the highest. The SiO ₂ microspheres attached to the surface of the whiskers could provide sites for the deposition of apatite. With the content of SiO ₂ microspheres increased, the deposition rate of apatite accelerated. The cytotoxicity level of the prepared porous ceramics ranged from 0 to 1, without cytotoxicity. CONCLUSION SiO ₂/HAP whisker porous ceramics have good biological activity, high porosity, three-dimensional complex pore structure, good axial compressive strength, and no cytotoxicity, which make it a promising scaffold material for bone tissue engineering.
Animals ; Durapatite ; Porosity ; Vibrissae ; Apatites ; Ceramics ; Silicon Dioxide

3D printing technology has great advantages in small batch and personalized customization, so it has attracted much attention in the biomedical field. The consumables available for 3D printing include polymer, metal, ceramic and derived materials. Biomedical ceramics, with high melting point and poor toughness, are the most difficult materials to be used in 3D printing. The progress of 3D printing ceramic preparation process using ceramic powder, ceramic slurry, ceramic wire, ceramic film and other different raw materials as consumables are reviewed, and the surface roughness, size, density and other parameters of ceramics prepared by SLS, 3DP, DIW, IJP, SL, DLP, FDM, LOM and other different processes are compared. The study also summarizes the clinical application status of 3D printed bioceramics in the field of hard tissue repair such as bone tissue engineering scaffolds and dental prostheses. The SL ceramic additive manufacturing technology based on the principle of UV polymerization has better manufacturing precision, forming quality and the ability to prepare large-size parts, and can also endow bioceramics with better biological properties, mechanical properties, antibacterial, tumor treatment and other functions by doping trace nutrients and surface functional modification. Compared with the traditional subtractive manufacturing process, the bioceramics prepared by 3D printing not only have good mechanical properties, but also often have better biocompatibility and osteoconductivity.
Bone and Bones ; Ceramics ; Printing, Three-Dimensional ; Tissue Engineering ; Tissue Scaffolds

OBJECTIVE: In order to solve the problem that the existing oxygen production technology cannot simultaneously produce pure oxygen, high-purity oxygen, ultra-pure oxygen, and the modular expansion of oxygen production capacity, a new type of electrochemical ceramic membrane oxygen production system was discussed and developed. METHODS: Through the design of the ceramic membrane stack, airflow distributor, heater, double spiral exchanger, thermal insulation sleeve, control panel, control box and auxiliary system in the electrochemical ceramic membrane oxygen generator, a modular oxygen production system is formed. RESULTS: The modular design can produce pure oxygen, high-purity oxygen and ultra-pure oxygen to meet various oxygen consumption needs. CONCLUSIONS The electrochemical ceramic membrane oxygen production system is a new type of oxygen production technology. The main components have no moving parts, no noise, and no pollution. It can produce pure oxygen, high-purity oxygen and ultra-pure oxygen on site, with small size, light weight, and module combination which is suitable for convenient expansion and installation of oxygen consumption.
Oxygen ; Ceramics ; Technology

OBJECTIVES: This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods. METHODS: The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LD_NP, LD_B, LD_P, LD_BP, LU_NP, LU_B, LU_P, and LU_BP. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%. RESULTS: LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement. CONCLUSIONS For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.
Inlays ; Finite Element Analysis ; Composite Resins ; Bicuspid ; Ceramics ; Dental Stress Analysis

OBJECTIVES: This study aimed to remove occlusal veneers of varied thicknesses and compositions by Er:Yag laser in vitro and analyze the interfacial microstructure between veneers and tooth that irradiated by laser, by which experimental evidence could be provided to support the non-invasive removal of occlusal veneerby laser. METHODS: Fresh mandibular premolars extracted for orthodontic requirements were collected for tooth preparation. Three kinds of ceramic materials (Vita Suprinity, Vita Mark Ⅱ, and Upcera Hyramic) were selected to fabricate occlusal veneer with different thicknesses (1.0, 1.5, and 2.0 mm). One week later, Er:Yag laser (2.5 W and 3.5 W) was used to irradiate and remove the occlusal veneer and recorded the timespan. After the removal operation, the micro-morphologies of samples were examined by scanning electron microscope. RESULTS: Upcera Hyramic veneer failed to be removed (>20 min); the operation span at 2.5 W, Vita Suprinity (96.0 s±16.0 s) was longer than Vita MarkⅡ(84.5 s±19.5 s) in the 1.0 mm group (P<0.05), and Vita Suprinity (246.5 s±13.5 s) was longer than Vita MarkⅡ(170.0 s±14.0 s) in the 1.5 mm group (P<0.05). At 3.5 W, Vita Suprinity (381.0 s±24.0 s) was longer than Vita MarkⅡ(341.5 s±26.5 s) in the 2.0 mm group. CONCLUSIONS Increasing laser power could shorten the operation span and facilitate the removal of occlusal veneers with the same thickness and composition. The occlusal veneer was sustained when insufficient laser power was applied. With the same laser power and ceramic thickness, laser penetration could interfere with the integral of the ceramic structure when the laser interacted with the bonding layer. With the same ceramic composition and laser power, the operation span and laser power increased with the thickness of the occlusal veneer. However, the laser was incapable of removing occlusal resin veneer directly.
Lasers, Solid-State ; Materials Testing ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Bicuspid ; Dental Veneers