Design for a wireless regulation system based on STM 32 single-chip microcomputer for 3D water tank
10.3969/j.issn.1672-8270.2025.02.029
- VernacularTitle:基于STM32单片机的三维水箱无线调节系统设计
- Author:
Wei LI
1
;
Cheng LIN
;
Xiaoqing ZHENG
;
Xiaopo KE
;
Yifan WANG
Author Information
1. 中国人民解放军联勤保障部队第九〇〇医院医学工程科 福州 350001
- Publication Type:Journal Article
- Keywords:
Three dimension(3D)water tank;
Measurement of ray beam;
STM32F103 single chip microcomputer;
ZigBee technique
- From:
China Medical Equipment
2025;22(2):161-164,169
- CountryChina
- Language:Chinese
-
Abstract:
Objective:To design a wireless regulation system based on STM 32 single chip microcomputer for three-dimension(3D)water tank,so as to improve the efficiency of physical verification for radiation.Methods:The wireless regulation system of 3D water tank was designed on the basis of STM32F103 single chip microcomputer and ZigBee technique through combined with regulation and control system for conventional 3D water tank,and the indicators of testing performance was also evaluated.Results:The wireless regulation system for 3D water tank can realize remote control to drive the operation of motor.The accuracy error of the detector was less than 0.2 mm along the x axis,y axis and z axis of the water tank.The repetitive error of the designated position was less than 0.1 mm after the detector repetitively reached the specified location along each axis.The vertical error of motion was less than 0.5 mm when the itinerary was less and equal to 200 mm,and this error was less than 1.0 mm when it was greater than 200 mm.Conclusion:The wireless regulation system of 3D water tank based on STM 32 can improve the information and intelligence levels that are measured and verified by ray beam,which is more in line with the requirement of radiation physics for measurement,and it can provide better technical support for the metrological verification of the equipment of nuclear medicine.
