Analysis on noise hazard characteristics of key industries workplaces in Huizhou City
10.20001/j.issn.2095-2619.20251017
- VernacularTitle:惠州市重点行业工作场所噪声危害特征分析
- Author:
Zhuocheng YAO
1
;
Guoyong XU
;
Jianyu GUO
;
Weilan YAN
;
Haijie LIN
;
Xi ZHOU
;
Bin XIAO
Author Information
1. Huizhou Occupational Disease Prevention and Control Institute, Huizhou, Guangdong 516001, China
- Publication Type:Journal Article
- Keywords:
Key industry;
Key work sites;
Workplace;
Noise;
Spectrum
- From:
China Occupational Medicine
2025;52(5):579-584
- CountryChina
- Language:Chinese
-
Abstract:
Objective To understand the characteristics of occupational noise hazards in key industries in Huizhou City. Methods A total of 247 enterprises from 13 key industries in Huizhou City were selected as the research subjects using the stratified judgment sampling method. The worksite survey of occupational health and workplace noise intensity and spectrum monitoring were conducted at key work sites using "questionnaires and on-site inspections" method. Results The rate of noise intensity exceeding national standards was 53.4% (132/247). The median, 25th and 75th percentile of noise pressure levels in workplaces and worksites were 85.1 (81.2, 91.2)and 82.5 (78.8, 86.3) dB(A), respectively. The high-noise workplaces accounted for 50.0% (479/958). The rate of noise intensity exceeding national standard at work sites was 32.9% (303/921). The sound pressure level of noise at work sites was positively correlated with sound pressure level of noise sources (Spearman correlation coefficient=0.73, P<0.01). The top three high-risk work sites for exceeding national noise standards were grinding, frame nailing, and material cutting, with exceedance rates of 84.6%, 81.3%, and 62.8%, respectively. The frequency characteristics of the top ten high-risk work sites were mainly high-frequency noise. There were significant differences in noise spectrum characteristics among different workpiece materials used in similar types of work sites (all P<0.05), though high-frequency noise remained dominant. Conclusion Noise hazards in workplaces of key industries in Huizhou City are relatively severe. Continuous attention should be given to key work sites with high over-standard rate, such as grinding, frame nailing, and material cutting, and noise control strategies should be developed based on frequency spectrum characteristics.
