Design and Development of a Heat Sealing System for Rapid Reuse of Ultrasonic Probes
- VernacularTitle:超声探头快速复用热封系统的设计与研发
- Author:
Ke WU
1
;
Junjie LI
;
Linjuan ZHANG
Author Information
- Keywords: Ultrasound equipment; Ultrasound probe; Rapid reuse; Infection; Medical devices
- From: Journal of Sichuan University (Medical Sciences) 2024;55(3):762-768
- CountryChina
- Language:Chinese
- Abstract: Objective Ultrasound diagnosis and treatment is easy to perform and takes little time.It is widely used in clinical practice thanks to its non-invasive,real-time,and dynamic characteristics.In the process of ultrasound diagnosis and treatment,the probe may come into contact with the skin,the mucous membranes,and even the sterile parts of the body.However,it is difficult to achieve effective real-time disinfection of the probes after use and the probes are often reused,leading to the possibility of the probes carrying multiple pathogenic bacteria.At present,the processing methods for probes at home and abroad mainly include probe cleaning,probe disinfection,and physical isolation(using probe covers or sheaths).Yet,each approach has its limitations and cannot completely prevent probe contamination and infections caused by ultrasound diagnosis and treatment.For example,when condoms are used as the probe sheath,the rate of condom breakage is relatively high.The cutting and fixing of cling film or freezer bags involves complicated procedures and is difficult to perform.Disposable plastic gloves are prone to falling off and causing contamination and are hence not in compliance with the principles of sterility.Furthermore,the imaging effect of disposable plastic gloves is poor.Therefore,there is an urgent need to explore new materials to make probe covers that can not only wrap tightly around the ultrasound probe,but also help achieve effective protection and rapid reuse.Based on the concept of physical barriers,we developed in this study a heat sealing system for the rapid reuse of ultrasound probes.The system uses a heat sealing device to shrink the protective film so that it wraps tightly against the surface of the ultrasound probe,allowing for the rapid reuse of the probe while reducing the risk of nosocomial infections.The purpose of this study is to design a heat sealing system for the rapid reuse of ultrasound probes and to verify its application effect on the rapid reuse of ultrasound probes.Methods 1)The heat sealing system for the rapid reuse of ultrasound probes was designed and tested by integrating medical and engineering methods.The system included a protective film(a multilayer co-extruded polyolefin thermal shrinkable film)and a heat sealing device,which included heating wire components,a blower,a photoelectric switch,temperature sensors,a control and drive circuit board,etc.According to the principle of thermal shrinkage,the ultrasound probe equipped with thermal shrinkable film was rapidly heated and the film would wrap closely around the ultrasound probe placed on the top of the heat sealing machine.The ultrasound probe was ready for use after the thermal shrinkage process finished.Temperature sensors were installed on the surface of the probe to test the thermal insulation performance of the system.The operation procedures of the system are as follows:placing the ultrasound probe covered with the protective film in a certain space above the protective air vent,which is detected by the photoelectric switch;the heating device heats the thermal shrinkable film with a constant flow of hot air at a set temperature value.Then,the probe is rotated so that the thermal shrinkable film will quickly wrap around the ultrasound probe.After the heat shrinking is completed,the probe can be used directly.2)Using the convenience sampling method,90 patients from the Department of Anesthesiology and Perioperative Medicine,the First Affiliated Hospital of Xi'an Jiaotong University were included as the research subjects.All patients were going to undergo arterial puncture under ultrasound guidance.The subjects were divided into 3 groups,with 30 patients in each group.Three measures commonly applied in clinical practice were used to process the probes in the three groups and water-soluble fluorescent labeling was applied around the puncture site before use.In the experimental group,the probes were processed with the heat sealing system.The standard operating procedures of the heat sealing system for rapid reuse of ultrasonic probes were performed to cover the ultrasonic probe and form a physical barrier to prevent probe contamination.There were two control groups.In control group 1,disinfection wipes containing double-chain quaternary ammonium salt were used to repeatedly wipe the surface of the probe for 10-15 times,and then the probe was ready for use once it dried up.In the control group 2,a disposable protective sheath was used to cover the front end of the probe and the handle end of the sheath was tied up with threads.Comparison of the water-soluble fluorescent labeling on the surface of the probe(which reflected the colony residues on the surface of the probe)before and after use and the reuse time(i.e.,the lapse of time from the end of the first use to the beginning of the second use)were made between the experimental group and the two control groups.Results 1)The temperature inside the ultrasound probe was below 40℃and the heat sealing system for rapid reuse did not affect the performance of the ultrasound probe.2)The reuse time in the heat sealing system group,as represented by(median[P25,P75]),was(8.00[7.00,10.00])s,which was significantly lower than those of the disinfection wipe group at(95.50[8.00,214.00])s and the protective sleeve group at(25.00[8.00,51.00])s,with the differences being statistically significant(P<0.05).No fluorescence residue was found on the probe in either the heat sealing system group or the protective sheath group after use.The fluorescence residue in the heat sealing system group was significantly lower than that in the disinfection wipes group,showing statistically significant differences(χ2=45.882,P<0.05).Conclusion The thermal shrinkable film designed and developed in this study can be cut and trimmed according to the size of the equipment.When the film is heated,it shrinks and wraps tightly around the equipment,forming a sturdy protective layer.With the heat sealing system for rapid reuse of ultrasonic probes,we have realized the semi-automatic connection between the thermal shrinkable film and the heating device,reducing the amount of time-consuming and complicated manual operation.Furthermore,the average reuse time is shortened and the system is easy to use,which contributes to improvements in the reuse and operation efficiency of ultrasound probes.The heat sealing system reduces colony residues on the surface of the probe and forms an effective physical barrier on the probe.No probes were damaged in the study.The heat sealing system for rapid reuse of ultrasonic probes can be used as a new method to process the ultrasonic probes.
