Research on motion characteristics of spacesuit joints based on parametric modeling analysis
10.16289/j.cnki.1002-0837.2025.02002
- VernacularTitle:基于参数化建模分析方法的舱外服关节活动特性研究
- Author:
Dongyue LIU
1
;
Rongqing WANG
;
Junbing LIU
;
Aiming BU
;
Hongrui YANG
;
Qian RAN
;
Wanxin ZHANG
Author Information
1. 中国航天员科研训练中心,北京 100094;人因工程全国重点实验室,北京 100094
- Keywords:
spacesuit;
fitness;
motion joint;
activity;
parametric modeling analysis
- From:Space Medicine & Medical Engineering
2025;36(2):96-100
- CountryChina
- Language:Chinese
-
Abstract:
Objective With the development of manned space missions to the moon and space exploration,extravehicular activities become more frequent and extravehicular mission become more complex,which puts forward higher requirements for the extravehicular spacesuit.In order to ensure the ergonomics of spacesuit,the flexible joints are usually adopted in the limbs of spacesuit.The structural design of large angle of movement and low resistance joints is the basic for ensuring the ergonomics of spacesuit.Methods This study established a method of spacesuit joint structure to analysis the motion characteristic of typical joints.Firstly,the structure and activity characteristics of the spacesuit and lunar space suits were comprehensively analyzed,and the activity characteristics of different typical structure are qualitatively analyzed based on existing empirical method.Then,the dynamics of typical structure was analyzed by finite element model.By studying the change trend of motion of spacesuit joint with motion angle,and the motion characteristic curve was obtained.Finally,the model was studied according to different structural size parameters.The influence of structural parameters on the motion characteristics was analyzed,and the curves was obtained to provide a basis for design of spacesuit motion joint structure.Results Through the above analysis,the motion characteristics of different typical structure are obtained qualitatively.And the influence of different structure parameters on the motion characteristics was analyzed.This establishes the method basis for structure design.Conclusion The study was carried out a method based on finite element model for joint motion analysis,which is suitable for the design of typical joint structure of spacesuit.
