Effects of elastic modulus of the metal block on the condylar-constrained knee prosthesis tibial fixation stability.
10.7507/1001-5515.202410039
- Author:
Yuhan ZHANG
1
;
Jing ZHANG
1
;
Tianqi DONG
1
;
Xuan ZHANG
1
;
Weijie ZHANG
2
;
Lei GUO
1
;
Zhenxian CHEN
1
Author Information
1. School of Construction Machinery, Chang'an University, Xi'an 710064, P. R. China.
2. Honghui Hospital, Xi'an Jiaotong University, Xi'an 710054, P. R. China.
- Publication Type:Journal Article
- Keywords:
Constrained condylar knee prosthesis;
Finite element analysis;
Fixation stability;
Metal block
- MeSH:
Knee Prosthesis;
Humans;
Finite Element Analysis;
Tibia/surgery*;
Elastic Modulus;
Arthroplasty, Replacement, Knee/methods*;
Stress, Mechanical;
Metals;
Prosthesis Design;
Knee Joint/surgery*;
Biomechanical Phenomena
- From:
Journal of Biomedical Engineering
2025;42(4):782-789
- CountryChina
- Language:Chinese
-
Abstract:
Although metal blocks have been widely used for reconstructing uncontained tibial bone defects, the influence of their elastic modulus on the stability of tibial prosthesis fixation remains unclear. Based on this, a finite element model incorporating constrained condylar knee (CCK) prosthesis, tibia, and metal block was established. Considering the influence of the post-restraint structure of the prosthesis, the effects of variations in the elastic modulus of the block on the von Mises stress distribution in the tibia and the block, as well as on the micromotion at the bone-prosthesis fixation interface, were investigated. Results demonstrated that collision between the insert post and femoral prosthesis during tibial internal rotation increased tibial von Mises stress, significantly influencing the prediction of block elastic modulus variation. A decrease in the elastic modulus of the metal block resulted in increased von Mises stress in the proximal tibia, significantly reduced von Mises stress in the distal tibia, decreased von Mises stress of the block, and increased micromotion at the bone-prosthesis fixation interface. When the elastic modulus of the metal block fell below that of bone cement, inadequate block support substantially increased the risk of stress shielding in the distal tibia and fixation interface loosening. Therefore, this study recommends that biomechanical investigations of CCK prostheses must consider the post-constraint effect, and the elastic modulus of metal blocks for bone reconstruction should not be lower than 3 600 MPa.
