Functional recovery after mandibular condyle fracture was a contradictory result of many authors. The treatment goal of condyle fracture has been directed primarily toward restoration of functional movement of the mandible. We selected some patients who requested functional therapy in many cases of condylar fracture, depend on pattern of fracture, patient's demand, occlusion, age. Without intermaxillary fixation, we induced the patients to rapid healing of temporomandibular function and normal mandibular protrusive, lateral movement as a result of early functional therapy by activator. So, the authors report the cases with review of concerned literature.
Humans ; Mandible ; Mandibular Condyle

We introduce a simple rehabilitation program after the miniplate fixation of high-condylar fracture of mandible. Intermaxillary fixation with arch bar is used. The length of the fixation period is about 14 days after surgery. At the end of this period, the bracket is applied to maxillary incisor, the occlusion becomes stable and reproducible and then aggressive jaw opening excercise begins. From postoperative day 15 to 21, elastics are applied 24 hours a day. They are placed lightly during the daytime to assist guiding protrusion of the mandible. The patient is instructed to protrude the mandible and to open the mouth simultaneously. From postoperative day 22 to 28, the exercise is modified to lateral movement. After the bracket is removed on postoperative day 29, the patient excercised the chin laterally without any guiding elastic fixation for approximately 1 week. This regimen can be widely used in ostectomy-osteosynthesis cases.
Chin ; Fracture Fixation ; Humans ; Incisor ; Jaw ; Mandible ; Mandibular Condyle ; Mouth ; Rehabilitation*

The author evaluated the effect of chin cap for the growing patient with cross-bite. The date were obtainde from superimposition of per and post-treatment lateral cephaograms. The results might be as follows; 1. increase ANB angle, Y-axis angle, SN-MP angle. 2. made anterior facial hright more greater than posterior facial hright. 3. as a results, rotate mandible backward.
Chin* ; Humans ; Mandible

OBJECTIVE: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. METHODS: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. RESULTS: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. CONCLUSIONS: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.
Adult ; Chin ; Cone-Beam Computed Tomography ; Facial Asymmetry ; Humans ; Linear Models ; Mandible ; Mandibular Condyle ; Maxilla ; Skull Base

To determine the difference in cephalometric measurements between centric relation and centric occlusion, 60 patient-20 patients for each malocclusion group-were examined with the cephalograms in centric relation and in centric occlusion. The results are as follows: 1. There are differences in cephalometric measurements with the mandible in the two different position, and some measurements are statistically significant. 2. No clinically useful prediction may be made from cephalometric radiographs concerning the amount of mandibular deflection from centric relation to centric occlusion. 3. If, the large differences in the cephalometric measurements with the mandible in the two different position, the analysis with the cephalogram in centric occlusion is needed to be compensated with the other clinical approach.
Centric Relation ; Humans ; Malocclusion ; Mandible ; Mandibular Condyle*

PURPOSE : To classify and evaluate mandibular fractures. MATERIALS AND METHODS : The author classified mandibular fractures of 284 patients who were referred to the Chonbuk National University Dental Hospital during the period from March 2004 to June 2007. This study was based on the conventional radiographs as well as computed tomographs which were pertained to the 284 patients who have had the mandibular fractures including the facial bone fractures. And mandibular fractures were classified with respect to gender, age, site and type of the fractures. RESULTS : More frequently affected gender with mandibular fracture was male with the ratio of 3.3 : 1. The most frequently affected age with mandibular fracture was third decade (38%), followed by fourth decade (16%), second decade (15%), fifth decade (11%), sixth decade (7%), seventh decade (5%), eighth decade (4%), first decade (4%), and ninth decade (0.3%). The most frequent type of mandibular fracture was single fracture (58%), followed by double fracture (39%), triple fracture (3%). The most common site of mandibular fracture was mandibular condyle as 113 cases (27.7%) and the next was mandibular symphysis as 109 cases (26.7%), mandibular angle as 103 cases (25.3%), mandibular body as 83 cases (20.3%) in order. The sum of fracture sites were 408 sites and there were 1.4 fracture sites per one patient. The number of mandible fractures accompanied with facial bone fractures were 41 cases (14.4%). CONCLUSION : The results showed the most frequent type and common site of mandibular fracture was single fracture and mandibular condyle respectively.
Facial Bones ; Humans ; Male ; Mandible ; Mandibular Condyle ; Mandibular Fractures

Numerous studies have revealed the similarities and discrepancies in two divisions of class II malocclusion, since these malocclusion groups have been postulated to be disparate criterion, much as classified under one diagnostic umbrella. This study was undertaken to describe the craniofacial configurations of class II division 1 and 2, and consequently to discriminate the morphologic differences between the two malocclusion groups in Korean sample. Lateral headfilms of 34 class II division 1 and 29 division 2 were employed, while those of 142 adults of normal occlusion served as a control. The landmarks were digitized and 26 variables were statistically analyzed for one way: 1. There manifested no statistically significant difference in maxillary position anteroposteriorly. Normal occlusion group exhibited most anteriorly positioned mandible, whereas class II division 1 showed the most retroposition. Class II division 1 disclosed clockwise rotation tendency of mandible, which resulted in position of the chin posteriorly. 2. Class II division 1 showed greater in SN to MP, SN to PP significantly than other groups. 3. Class II division 2 showed smaller gonial angle and larger mandibular body length than other groups. 4. Class II division 1 revealed greater anterior lower face height than other groups, whereas division 2 dictated significantly greater posterior face height. 5. Class II division 2 expressed the most retroclined lower incisor, while division 1 manifested the most proclination. The largest interincisal angle resided in Class II division 2 group. There were no significant differences in upper molar position anteroposteriorly.
Adult ; Chin ; Humans ; Incisor ; Malocclusion ; Mandible ; Molar

OBJECTIVETo evaluate whether there is difference with regard to chin morphology in subjects with different vertical skeletal craniofacial pattern and the relationship among them.

METHODSThe sample was composed of 80 adolescents who denied orthodontic treatment history and presented Class I skeletal pattern, aged (12.69+/-0.70) years. They were divided into three groups according to mandibular plane angle: High angle group (21 cases, FH/MP> or = 32 degrees), average angle group(43 cases, 22 degrees chin dimensions studied included height, depth, ratio (depth/height), angle, and so on. They were compared between different groups with One-Way ANOVA. Correlation was analyzed between vertical skeletal craniofacial pattern and chin morphology.

RESULTSSNA, SNB and ANB presented no significant difference among three groups. Compared with the low angle group, high angle subjects exhibited increased chin height, depth/height ratio, concavity and decreased chin angle. Therefore the chin looked lathier and less protrusive in high angle group. Positive correlation was found between mandibular plane angle and chin height, concavity, curvature (P<0.05), negative correlation between mandibular plane angle and chin minimal depth, depth/height ratio, angle.

CONCLUSIONDifference emerged with regard to chin morphology in subjects with different vertical craniofacial skeletal pattern, which deserves to be taken into consideration in orthodontic treatment planning.

BACKGROUND: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. METHODS: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. RESULTS: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. CONCLUSIONS: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.
Chin ; Congenital Abnormalities ; Equidae ; Glenoid Cavity ; Humans ; Jaw ; Joints ; Mandible ; Mandibular Condyle ; Mandibular Osteotomy ; Maxilla ; Methods ; Oral and Maxillofacial Surgeons ; Orbit ; Orthognathic Surgery ; Osteotomy, Sagittal Split Ramus ; Surgery, Oral ; Temporomandibular Joint

PURPOSE: To investigate the relationship between 3D bone architectural parameters and direction-related elastic moduli of cancellous bone of mandibular condyle. MATERIALS AND METHODS: Two micro-pigs (Micro-pig(R), PWG Genetics Korea) were used. Each pig was about 12 months old and weighing around 44 kg. 31 cylindrical bone specimen were obtained from cancellous bone of condyles for 3D analysis and measured by micro-computed tomography. Six parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI), degree of anisotropy (DA) and 3-dimensional fractal dimension (3DFD). Elastic moduli of three orthogonal directions (superiorinferior (SI), medial-lateral (ML), andterior-posterior (AP) direction) were calculated through finite element analysis. RESULTS: Elastic modulus of superior-inferior direction was higher than those of other directions. Elastic moduli of 3 orthogonal directions showed different correlation with 3D architectural parameters. Elastic moduli of SI and ML directions showed significant strong to moderate correlation with BV/TV, SMI and 3DFD. CONCLUSION: Elastic modulus of cancellous bone of pig mandibular condyle was highest in the SI direction and it was supposed that the change into plate-like structure of trabeculae was mainly affected by increase of trabeculae of SI and ML directions.
Elastic Modulus ; Finite Element Analysis ; Fractals ; Mandible ; Mandibular Condyle