1.Is it necessary to put "cutoff levels of food specific IgE" in between the glass and the table in your office?.
Allergy, Asthma & Respiratory Disease 2015;3(1):1-2
No abstract available.
Glass*
2.Development of Prototype Quality Assurance Procedure for Blood Irradiator Using Glass Dosimeter Jig.
Dong Hyeok JEONG ; Yeong Rok KANG ; Young Min MOON ; Hyo Jin KIM ; Dong Won KWAK ; Jeung Kee KIM ; Man Woo LEE
Korean Journal of Medical Physics 2012;23(2):123-126
For the purpose of quality assurance (QA) of the blood irradiator, QA programs for daily, monthly, and yearly were developed. For daily tests, simple items for basically operating the machine are recommended. For monthly and yearly tests, the measurement of dose to assure the dose delivery system are performed by a dosimetry devices (Glass dosimeter jig) developed in this study. The QA program is practical for clinical environment.
Glass
5.Determination of Output Factors for the Gamma Knife using a Radiophotoluminescent Glass Rod Detector.
Jeong Eun RAH ; Won Seop SUH ; Dong Oh SHIN ; Hee Sun KIM ; Tea Suk SUH
Korean Journal of Medical Physics 2007;18(1):13-19
The purpose of study is to investigate whether glass rod detector (GRD) would be suitable for dosimeter of radiotherapy units. A GRD is used for the measurement of the output factors and x-axis beam profiles from Gamma Knife. The output factors measured with GRD from the 14, 8 and 4 mm collimators relative to the 18 mm collimator are 0.980+/-0.013, 0.949+/-0.013 and 0.872+/-0.012, respectively. The output factors obtained with a GRD are within 1.0% in good agreement with the values recommended by the manufacture. The full width at half maximum (FWHM) of x-axis beam profiles measured with GRD are 5.9 mm at a 4 mm collimator.
Glass*
;
Radiotherapy
6.Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks.
Uzay KOC-VURAL ; Ismail BALTACIOGLU ; Pinar ALTINCI
Restorative Dentistry & Endodontics 2017;42(2):118-124
OBJECTIVES: This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. MATERIALS AND METHODS: Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between 5 - 55℃, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent), Optidisc (Kerr), and Praxis TDV (TDV Dental) (n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37℃. The color differences (ΔE) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05). RESULTS: Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p < 0.05). Significant color changes were detected after 1 day storage in coffee solution (p < 0.05), except Quixfil/Optidisc which was color-stable after 7 days (p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05). CONCLUSIONS: Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.
Coffee
;
Glass
7.Clinical Evaluation of the Interpupillary Distance and the Distance Between Optical Centers in Spectacles Wearers.
Mee Young LEE ; Man Soo KIM ; Jae Ho KIM
Journal of the Korean Ophthalmological Society 1989;30(4):605-610
The authors analysed the interpupillary distance, the distance between optical centers and the distance from the upper margin of the lens to the optical center in 297 spectacles wearers. The results were as follows: 1. Among the 297 glasses wearers, myopic glasses wearers accounted for 226 persons(76.09%), and hyperopic glasses wearers for 71 persons(23.91%). 2. Among the 297 glasses wearers, the distance between optical centers coincided with the interpupillary distance in 51 persons(17.17%), and was incongruous in 246 persons(82.83%). 3. Among the 297 glasses wearers, the distance from the upper margin of the lens to the optical center was the same in both eyes in 152 persons(51.19%), and was incongruous in 145 persons(48.81%). 4. Among the 246 persons in whom the distance between optical centers of their glasses did not coincide with the interpupillary distance, the horizontal prismatic effects of both eyes overpassed the aberration of tolerance of ophthalmic dispensing in 46 persons(18.70%), and the maximum horizontal prismatic effect of one eye was 5.85 prism diopters. 5. Among the 145 persons in whom the distance from the upper margin of the lens to the optical center of their glasses did not coincide in both eyes, the vertical prismatic effects overpassed the aberration of tolerance of ophthalmic dispensing in 48 persons(33.10%), and the maximum vertical prismatic effect was 2.47 prism diopters.
Eyeglasses*
;
Glass
;
Humans
8.Evaluation of clot formation in blood-contrast agent mixture: experimental study on ionic/nonionic contrast agents and plastic/ glass syringes.
Hyung Jin SHIM ; Jong Beum LEE ; Yong Chul LEE ; Kwan Seh LEE ; Kun Sang KIM
Journal of the Korean Radiological Society 1991;27(1):27-32
No abstract available.
Contrast Media*
;
Glass*
;
Syringes*
9.Comparison of the translucency of shaded zirconia all-ceramic systems.
Sevcan KURTULMUS-YILMAZ ; Mutahhar ULUSOY
The Journal of Advanced Prosthodontics 2014;6(5):415-422
PURPOSE: The purpose of this study was to evaluate and compare the translucency of shaded zirconia all-ceramic systems. MATERIALS AND METHODS: Translucency of 3 different zirconia all-ceramic systems colored by different techniques was compared with a lithium disilicate glass-ceramic (IPS e.max Press). Square-shaped specimens with 0.5 mm thickness were fabricated from In-Ceram YZ, ICE Zirkon and Katana systems in A1, A2 and A3.5 shades according to Vitapan Classical shade tab (n=11). Specimens were then veneered and glazed with corresponding veneer ceramic recommended by each zirconia system manufacturer and the total thickness was set to 1.5 mm. Translucency measurements were performed with VITA Easyshade Compact spectrophotometer after each stage and translucency parameter was calculated. Data were statistically analyzed with repeated measures ANOVA and Tukey multiple comparison test. RESULTS: The control group was significantly more translucent than the zirconia systems (P<.05). ICE Zirkon cores showed the least translucency; neither In-Ceram YZ nor Katana systems were superior to each other in terms of translucency. Translucency of all specimens was decreased after veneering, and the translucency rankings were changed. CONCLUSION: Coloring technique did not have a significant effect on translucency of zirconia cores. Although zirconia systems were less translucent than lithium disilicate glass ceramic, they had partial translucency and there were translucency differences among the zirconia systems. Chroma affected the translucency of precolored zirconia cores.
Ceramics
;
Glass
;
Ice
;
Lithium
10.Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials.
Husain Hatim HARIANAWALA ; Mohit Gurunath KHEUR ; Sanjay Krishnaji APTE ; Bharat Bhanudas KALE ; Tania Sanjeev SETHI ; Supriya Mohit KHEUR
The Journal of Advanced Prosthodontics 2014;6(6):456-461
PURPOSE: Translucency and colour stability are two most important aspects for an aesthetic dental restoration. Glass ceramic restorations are popular amongst clinicians because of their superior aesthetic properties. In the last decade, zirconia has generated tremendous interest due to its favorable mechanical and biological properties. However, zirconia lacks the translucency that lithium disilicate materials possess and therefore has limitations in its use, especially in esthetically demanding situations. There has been a great thrust in research towards developing translucent zirconia materials for dental restorations. The objective of the study was to evaluate and compare the transmittance of a translucent variant of zirconia to lithium disilicate. MATERIALS AND METHODS: Two commercially available zirconia materials (conventional and high translucency) and 2 lithium disilicate materials (conventional and high translucency) with standardized dimensions were fabricated. Transmittance values were measured for all samples followed by a microstructural analysis using a finite element scanning electron microscope. One way analysis of variance combined with a Tukey-post hoc test was used to analyze the data obtained (P=.05). RESULTS: High translucency lithium disilicate showed highest transmittance of all materials studied, followed by conventional lithium disilicate, high translucency zirconia and conventional zirconia. The difference between all groups of materials was statistically significant. The transmittance of the different materials correlated to their microstructure analysis. CONCLUSION: Despite manufacturers' efforts to make zirconia significantly more translucent, the transmittance values of these materials still do not match conventional lithium disilicate. More research is required on zirconia towards making the material more translucent for its potential use as esthetic monolithic restoration.
Ceramics
;
Esthetics
;
Glass
;
Lithium*