No abstract available.
Fluorides*

OBJECTIVETo evaluate the efficacy of Tooth Mousse in reducing enamel demineralization lesions adjacent to bonded orthodontic brackets and promoting remineralization in vitro.

METHODS60 bovine teeth with bonded orthodontic brackets were randomly divided into three groups, negative control group, positive control group and experimental group, applied separately with distilled water, Duraphat fluoride varnish, Tooth Mousse. 3 groups were dipped into an artificial caries solution and an artificial saliva solution, cycling between them. All samples were detected by polarized light microscope, scanning electron microscope and electron probe micro-analysis.

RESULTSPolarized light microscope showed that the enamel surface of the experimental group were completed, the areas of positive birefringence were decreased obviously. Scanning electron microscope showed that a large number of deposits were found on the dental enamel surface of the experimental group, filled in the small local concave of enamel surface. Compared with the control group, electron probe micro-analysis showed that calcium and phosphate concentration of enamel surface was higher in experimental group than in negative control group (P<0.05), there was no significant differences between experimental group and positive control group (P>0.05).

CONCLUSIONTooth Mousse can reduce enamel demineralization and promoting remineralization in vitro.

Animals ; Cariostatic Agents ; Caseins ; Cattle ; Dental Caries ; Dental Enamel ; Fluorides ; Fluorides, Topical ; Orthodontic Brackets ; Phosphates ; Sodium Fluoride ; Tooth Demineralization

OBJECTIVETo evaluate the clinical effect of fluoride varnish in preventing caries of primary teeth, and to compare the caries prevention effects of fluoride varnish with two different concentrations.

METHODS150 children whose ages were three year-old were randomly chosen from one of nurseries of Chongqing, and were randomly divided into four groups with 37 children in 0.5% fluoride varnish group, 38 children in 0.1% fluoride varnish group, 39 children in 0.5% sodium fluoride group and 36 children in blank group. The groups included 71 'girls and 79 boys. Protective measure was applied every half an year and the research has lasted for two years. The research was designed by double-blinded methods, and was carried out with the dental caries standard suggested by World Health Organization. All the data were collected and the clinical effects of four groups were compared.

RESULTSThe average caries index and caries surface index of 0.1% fluoride varnish group and those of control groups were significantly higher than that of 0.5% fluoride varnish group. There were no significant difference between the average caries index and caries surface index of 0.1% fluoride varnish group and those of control groups.

CONCLUSION0.5% fluoride varnish was effective in preventing caries of primary teeth.

Cariostatic Agents ; Child ; Dental Caries ; Female ; Fluorides ; Fluorides, Topical ; Humans ; Male ; Paint ; Phosphates ; Sodium Fluoride ; Tooth, Deciduous

The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond fluoridated composite resins Blugloo and LightBond, resin-modified glass ionomer Rely XTM Luting 2, and conventional glass ionomer Fuji I®. Fluoride release of five orthodontic bracket adhesives and fluoride release ability after application of three fluoride products (1.23% acidulated phosphate fluoride gel, Tooth Mousse Plus®, Fluor Protector, and a toothbrush with sodium fluoride-containing toothpaste) were measured using a fluoride electrode that was connected to an ion analyzer. After 4 weeks of fluoride application, the surface roughness and surface morphology were examined using a surface roughness tester and field emission scanning electron microscopy. The amounts of fluoride release were observed not only on application of Tooth Mousse Plus® and Fluor Protector on resin-modified glass ionomer Rely XTM Luting 2 and Fuji I®, but also during tooth brushing using fluoride-containing toothpaste. After application of Tooth Mousse Plus®, except Transbond XT, the surface roughness increased, and all orthodontic adhesives showed a partial drop of micro-particle filler. On application of 1.23% acidulated phosphate fluoride gel on all orthodontic bracket adhesives, their surface roughness increased. To bond the orthodontic bracket, resin-modified glass ionomer Rely XTM Luting 2 and Fuji I® adhesives are highly recommended if the amount of fluoride release is considered to confer a preventative effect on dental caries, and among the fluoride products, Tooth Mousse Plus® and Fluor Protector are better than 1.23% acidulated phosphate fluoride gel, and these are expected to prevent dental caries even during tooth brushing with fluoride-containing toothpaste.
Acidulated Phosphate Fluoride ; Adhesives* ; Composite Resins ; Dental Caries ; Dental Cements ; Electrodes ; Fluorides* ; Glass ; Microscopy, Electron, Scanning ; Orthodontic Brackets* ; Sodium ; Surface Properties* ; Tooth ; Toothpastes

PURPOSE: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. MATERIALS AND METHODS: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. RESULTS: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. CONCLUSION: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups.
Acidulated Phosphate Fluoride ; Bacteria ; Bacterial Adhesion ; Biofilms ; Fluorides ; Fusobacterium nucleatum ; Hydrogen-Ion Concentration ; Porphyromonas gingivalis ; Titanium*

In this study, sections of twenty eight teeth were used to investigate the effect of topical application of 8% stannous fluoride on the decalcification rate of enamel surfaces stripped in a manner suggested for orthodontic purpose. The enamel treated with a single application of a fluoride had a significantly lower tile rate of decalcification for the first 96 hours to lactate buffer solution. After double application of fluoride, decalcification rate decreased signicantly. This study suggested that the continuing protection of stripped surfaces should be sought by regularly scheduled treatment of the enamel with the topical application of fluoride and regular use of a fluoride containing dentifrice.
Dental Enamel* ; Dentifrices ; Fluorides ; Lactic Acid ; Tin Fluorides* ; Tooth

OBJECTIVETo evaluate the reliability of a method of measuring the total fluoride in fluoride-containing toothpastes with acid diffusion and fluoride selective electrode.

METHODSFour brands of commercially available non-fluoride toothpastes and fluoride-containing toothpastes were sampled. Fluoride was extracted from the toothpastes in 2 mol/L HC10(4) at room temperature overnight and then subjected to the measurement with fluoride electrode.

RESULTSFluoride recovery of the non-fluoride toothpastes containing calcium as abrasive by this method was 99.5%-100.5%, more than 94% of total fluoride was measured from the marketed fluoride toothpastes, and the variation coefficient of this method was less than 1.54%. While the abrasive was silicon, the fluoride recovery of the non-fluoride toothpastes was 83.4%, and 89.7% of total fluoride was measured from the marketed fluoride-containing toothpastes.

CONCLUSIONThe amount of total fluoride in the calcium containing toothpaste can be detected simply and accurately measured by acid diffusion and fluoride selective electrode.

Calcium ; Electrodes ; Fluorides ; Phosphates ; Reproducibility of Results ; Sodium Fluoride ; Toothpastes

OBJECTIVES: The aim of this study was to evaluate the degree of remineralization over time after application of fluoride varnish with and without tricalcium phosphate (TCP). METHODS: This in vitro study used extracted bovine lateral incisors without dental caries. Artificial lesions were created in the enamel specimens. The amount of mineral loss (ΔF(before)) was measured using quantitative light-induced fluorescence (QLF). Test fluoride varnishes (10 mg) were applied to the enamel surface of the specimen and dried for 4 min. No fluoride varnish was applied to the specimens in the control group. Each group was randomly assigned 12 specimens, and remineralization was allowed to occur to different time points (0.5, 1, 3, 6, 12, and 24 h) in each group. Specimens were washed with distilled water and dried with compressed air for 3 s. ΔF(after) was determined using QLF. RESULTS: When fluoride varnish containing TCP was applied for up to 6 h, the amount of mineral loss significantly increased, and when non-TCP fluoride varnish was applied for up to 12 hours, the amount of mineral loss significantly increased (P<0.05). However, the amount of mineral loss was higher in the control group. The difference between ΔF(before) and ΔF(after) (ΔΔF) increased over time. There was a significant difference between the TCP group and the control group after 6 h. The non-TCP group showed a significant difference after 24 h compared to the control group. After 12 h, significant differences were observed in the TCP group compared to both the non-TCP and control groups. CONCLUSIONS: This study showed that the degree of remineralization increased gradually over time after fluoride varnish application compared to the control group. In particular, fluoride varnish containing TCP showed better remineralization capability than varnish without TCP.
Compressed Air ; Dental Caries ; Dental Enamel ; Fluorescence ; Fluorides* ; Fluorides, Topical ; In Vitro Techniques ; Incisor ; Miners ; Paint* ; Water

OBJECTIVES: This study aims to compare the fluoride-release between different fluorine varnish under in vitro experimental conditions.METHODS: In this study, 5 fluoride varnish products distributed in Korea were selected. V-varnish™ (Vericom, Korea: VV), CavityShield™ (3M ESPE, USA: CS), Clinpro™ White varnish™ (3M ESPE, USA: CP), MI Varnish™ (GC, Japan: MI), and Fluor Protector (Ivoclar Vivadent, Liechtenstein: FP). For the in vitro study, 10 mg of each fluoride varnish was thinly applied to the same area of the specimen. The specimen was then immersed in 3 ml of distilled water at consistent intervals to confirm fluoride release. Nine specimens per group were used. Fluoride ion electrodes were used to measure the fluoride concentration of the solution. The Kruskal-Wallis nonparametric test was performed to compare between each experimental group, and the Wilcoxon signed-rank nonparametric test was performed to compare experimental groups over time. The significance level for a Type I error was set at 0.05. All statistical analyses were performed using SPSS 25.0 (IBM Co., Armonk, NY, USA).RESULTS: In vitro experiments showed that the amount of fluoride released from MI was higher than the other groups during the first 12 hours after application. However, the amount of fluoride released from CP and CS was higher than MI as the immersion time increased over 12 and 20 hours, respectively. The fluoride release from FP was the lowest at all measurement points.CONCLUSIONS: The results of this study showed that the remaining fluoride effect from rosin type fluoride varnishes was higher than liquid type fluoride varnishes. There were differences in the residual fluoride concentrations despite each fluoride varnish having the same fluoride content.
Dental Caries ; Electrodes ; Fluorides ; Fluorides, Topical ; Fluorine ; Immersion ; In Vitro Techniques ; Japan ; Korea ; Liechtenstein ; Paint ; Water

OBJECTIVETo evaluate the potential corrosive effect of topical fluoride agents used for professional treatments at dental prophylaxis on the polished surfaces of five composite resins.

METHODSA total of 125 specimens were fabricated from micro hybrid composite, nano-combined composite, nanocomposite, compomer and ormocer in a phi 6 mm x 3 mm cavity with 25 specimens for each composite group. The flat surfaces of the specimens were smoothed and polished, then applied respectively with four topical fluoride agents and distilled water, and stored at 37 degrees C 100% relative humidity for 30 min. The changes in morphologic features of the surfaces were assessed by scanning electron microscopy (SEM). The disintegrated surface was further analysed under a confocal laser scanning microscope (CLSM).

RESULTSAll fluorides showed reaction to all composites except nanocomposite. The aggressiveness of the fluorides arranged sequentially as F (Elmex fluid) > G (Elmex gelée) > D (Duraphat) > B (Bifluorid 12). The treated surfaces were generally rough. F and G caused the overall surface corrosion, whereas etching on the surface by D and B was sporadic confined. The destructive effects demonstrated a large number of craters on the surface somewhat like an atoll owing to filler dissolution. Crack formation resulted in destruction of the filler-matrix interface was observed. Ormocer was severely affected after F and G treatment. Instead of crater glass filler protruding from the bumpy surface indicated the excessively disintegrated matrix of ormocer. Topography under CLSM exhibited the roughening of the composite surface, roughness parameters for profile (Sa, Sz, Smax) increased when the surface was treated. Surface change in nanocomposite specimens was neither visually nor numerically discerned.

CONCLUSIONSTopical application of highly concentrated fluoride prophylactic agents leaded to surface degradation and porosity of composite, nanocomposite was, however, chemically resistant. Isolation of the composite surface should be considered in clinical application of topical fluoride.

Composite Resins ; chemistry ; Corrosion ; Fluorides, Topical ; chemistry ; In Vitro Techniques