A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Tumor immunotherapy has emerged as the fourth major therapeutic modality, following surgery, radiotherapy, and chemotherapy. Unlike traditional treatments that primarily target tumor cells directly, immunotherapy harnesses the body’s immune system to recognize and eliminate cancer cells. Over the past decade, various immunotherapeutic strategies have been developed, including immune checkpoint inhibitors (ICIs), chimeric antigen receptor (CAR) T cell therapy, cancer vaccines, and cytokine-based therapies. However, the immunosuppressive tumor microenvironment (TME) poses a significant obstacle to the effectiveness of these treatments. Polyamines—including putrescine, spermidine, and spermine—are polycationic metabolites that often accumulate abnormally in the TME and act as critical immunoregulatory molecules. T cells play a central role in antitumor immunity, yet their function is frequently influenced by immunoregulatory factors within the TME. Elevated polyamine levels in the TME have been implicated in dampening antitumor T cell responses, thereby facilitating tumor immune evasion. Polyamines in the TME originate from both tumor cells and tumor-associated immune cells. Tumor cells often overexpress the oncogene Myc, which drives the upregulation of polyamine biosynthetic enzymes, resulting in excessive intracellular polyamine production. Additionally, M2-polarized tumor-associated macrophages (M2-TAMs) contribute to polyamine accumulation by upregulating arginase-I (Arg-I), an enzyme that catalyzes the conversion of arginine into ornithine—a key precursor in the polyamine biosynthetic pathway. These combined sources lead to sustained polyamine enrichment in the TME, contributing to immune dysfunction and supporting tumor progression. Moreover, polyamines indirectly affect T cell activity by modulating macrophage polarization and directly suppress tumor cell apoptosis, further promoting an immunosuppressive environment. This review highlights the multifaceted roles of polyamines in modulating tumor-infiltrating T cell function, with a particular focus on their influence on CD4+ T cell differentiation,CD8+ T cell cytotoxicity, and immune checkpoint molecule expression. Recent studies suggest that polyamines suppress CD4+ T cell activation and differentiation by modulating the MAPK/ERK signaling pathway. Additionally, polyamines can impair T cell receptor (TCR) signaling and promote immune evasion through the upregulation of PD-L1 expression on tumor cells. These effects collectively contribute to weakened antitumor T cell responses. Polyamine blocking therapy (PBT), which primarily targets polyamine biosynthesis and transport, has emerged as a novel adjunctive immunotherapeutic strategy in cancer treatment. By reducing polyamine levels in the TME, PBT restores T cell effector functions and alleviates immunosuppression. Notably, studies have demonstrated that combining PBT with ICIs produces synergistic antitumor effects and may overcome resistance to ICI monotherapy. Although research has revealed the inhibitory effects of polyamines on T cell immune function, the underlying regulatory mechanisms remain to be fully elucidated. Moreover, due to compensatory mechanisms employed by tumor cells to maintain polyamine homeostasis, multi-targeted approaches may be necessary to achieve safe and effective therapeutic outcomes. Future PBT strategies may benefit from the integration of multi-omics technologies and the development of nanocarrier-based drug delivery systems, which could collectively enhance their specificity, efficacy, and applicability in cancer immunotherapy. This review systematically elucidates the immunomodulatory effects of polyamines on T cell function within the TME and provides theoretical support and novel insights for the advancement of tumor immunotherapeutic strategies.

OBJECTIVE To discuss the impact of Wenyang lishui formula on ventricular remodeling in rats with pulmonary hypertension-induced right heart failure （RHF） based on the Hippo/Yes-associated protein （YAP） signaling pathway. METHODS Ten rats were randomly selected as the control group. The remaining 63 rats were given a single intraperitoneal injection of monocrotaline to establish the pulmonary hypertension-induced RHF model. The 50 rats that successfully underwent the model establishment were randomly divided into the RHF group， low-dose group of Wenyang lishui formula （4.25 g/kg）， high-dose group of the Wenyang lishui formula （17.00 g/kg）， furosemide group （20 mg/kg）， and high-dose group of Wenyang lishui formula+ Hippo/YAP signaling pathway activator group （17.00 g/kg of Δ Wenyang lishui formula+16 mg/kg of PY-60）， with 10 rats in each group. The rats in each group were given the corresponding drug solution or normal saline by gavage or/andtail vein injection， once a day， for 4 consecutive weeks. During the experiment， the general conditions of the rats in each group were observed； after the last administration， the right ventricular diameter， right atrial diameter， end-diastolic volume， pulmonary artery blood flow acceleration time （PAAT） and its ratio to ejection time （ET） （PAAT/ET）， pulmonary artery pressure and its ratio to pulmonary arterial flow velocity （pulmonary artery pressure/velocity） were measured. The plasma levels of brain natriuretic peptide and angiotensin Ⅱ （Ang Ⅱ） were detected. The pathological changes of the right ventricular tissue were observed， and the collagen volume fraction， the phosphorylation levels of the large tumor suppressor 1/2 （LATS1/2） and YAP， and the protein expression of the transcriptional coactivator of PDZ-binding motif （TAZ） were also detected. RESULTS Compared with the RHF group， the rats in Wenyang lishui formula low-dose and high-dose groups showed improved hair color， movement， diet， and mental state. The atrophy of right ventricular myocardial cells， the increase of inflammatory cells， collagen deposition， and hypertrophy of myocardial fibers were significantly alleviated. The right ventricular internal diameter， right atrial internal diameter， end-diastolic volume， pulmonary artery pressure， pulmonary artery pressure/velocity， the plasma levels of brain natriuretic peptide and AngⅡ ， collagen volume fraction， the phosphorylation level of YAP and protein expression of TAZ were significantly decreased， while the PAAT， PAAT/ET and the phosphorylation level of LATS1/2 were significantly increased （P＜0.05）. PY-60 could significantly reverse the improvement effects of high-dose Wenyang lishui formula on the above quantitative indicators （P＜ 0.05）. CONCLUSIONS Wenyang lishui formula can restore the right heart function of pulmonary hypertension-induced RHF rats， reduce their pulmonary artery pressure， alleviate the pathological changes in their cardiac tissues， and the above effects may be related to the activation of Hippo expression and the inhibition of YAP phosphorylation.

This study established a high performance liquid chromatography(HPLC) fingerprint of Chuanxiong Rhizoma from different producing areas and screened its potential differential components for producing areas by chemometrics. Furthermore, the content of the above differential components in Chuanxiong Rhizoma from different producing areas was measured and compared. Then, the geoherbalism markers(geo-markers) that can be used to distinguish Dao-di and non-Dao-di Chuanxiong Rhizoma were excavated by chemometrics. In fingerprint studies, a total of 27 common peaks were determined, and the fingerprint similarity for 37 batches of Chuanxiong Rhizoma samples from different producing areas was above 0.968. The orthogonal partial least squares-discriminant analysis(OPLS-DA) was capable of distinguishing Chuanxiong Rhizoma from Sichuan and from three other provinces, as well as Dao-di Chuanxiong Rhizoma(from Dujiangyan) and non-Dao-di Chuanxiong Rhizoma(from other producing areas) in Sichuan province. Meanwhile, 14 potential differential components in Chuanxiong Rhizoma from different provinces and 16 potential differential components in Chuanxiong Rhizoma from different producing areas in Sichuan were screened by the variable importance in projection(VIP) analysis under OPLS-DA. The reference standards were used to identify 10 potential differential components in the common peaks, and subsequent content determination verified that the content of the above 10 potential differential components was different among different producing areas. Then, the OPLS-DA and VIP analysis were performed with the content of the 10 potential differential components as variables. The results showed that Z-ligustilide, chlorogenic acid, and the ratio of butylidenephthalide/senkyunolide A were the geo-markers that can distinguish Chuanxiong Rhizoma from Sichuan and Chuanxiong Rhizoma from Shaanxi, Hebei, and Jiangxi, while Z-ligustilide, n-butylphthalide, and the ratios of Z-ligustilide/senkyunolide A and butylidenephthalide/senkyunolide A were the geo-markers that can distinguish Dao-di Chuanxiong Rhizoma(from Dujiangyan) and non-Dao-di Chuanxiong Rhizoma(from other producing areas) in Sichuan province. This study elucidated the differences in material basis of Dao-di and non-Dao-di Chuanxiong Rhizoma based on fingerprinting and content determination combined with chemometrics, which provides a reference for the study of material basis of Dao-di traditional Chinese medicine.
Drugs, Chinese Herbal/chemistry* ; Rhizome/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Chemometrics/methods* ; Quality Control

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

The chemical constituents were systematically separated from the roots of Berberis polyantha by various chromatographic methods, including silica gel column chromatography, HP20 column chromatography, polyamide column chromatography, reversed-phase C_(18) column chromatography, and preparative high-performance liquid chromatography. The structures of the compounds were identified by physicochemical properties and spectroscopic techniques(1D NMR, 2D NMR, UV, MS, and CD). Four phenylpropanoids were isolated from the methanol extract of the roots of B. polyantha, and they were identified as(2R)-1-(4-hydroxy-3,5-dimethoxyphenyl)-1-propanone-O-β-D-glucopyranoside(1), methyl 4-hydroxy-3,5-dimethoxybenzoate(2),(+)-syringaresinol(3), and syringaresinol-4-O-β-D-glucopyranoside(4). Compound 1 was a new compound, and other compounds were isolated from this plant for the first time. The anti-inflammatory activity of these compounds was evaluated based on the release of nitric oxide(NO) in the culture of lipopolysaccharide(LPS)-induced RAW264.7 macrophages. At a concentration of 10 μmol·L~(-1), all the four compounds inhibited the LPS-induced release of NO in RAW264.7 cells, demonstrating potential anti-inflammatory properties.
Plant Roots/chemistry* ; Animals ; Mice ; Berberis/chemistry* ; RAW 264.7 Cells ; Macrophages/immunology* ; Drugs, Chinese Herbal/isolation & purification* ; Nitric Oxide/metabolism* ; Molecular Structure ; Anti-Inflammatory Agents/isolation & purification*